In the Linux kernel, the following vulnerability has been resolved: nilfs2: handle errors that nilfs_prepare_chunk() may return Patch series "nilfs2: fix issues with rename operations". This series fixes BUG_ON check failures reported by syzbot around rename operations, and a minor behavioral issue where the mtime of a child directory changes when it is renamed instead of moved. This patch (of 2): The directory manipulation routines nilfs_set_link() and nilfs_delete_entry() rewrite the directory entry in the folio/page previously read by nilfs_find_entry(), so error handling is omitted on the assumption that nilfs_prepare_chunk(), which prepares the buffer for rewriting, will always succeed for these. And if an error is returned, it triggers the legacy BUG_ON() checks in each routine. This assumption is wrong, as proven by syzbot: the buffer layer called by nilfs_prepare_chunk() may call nilfs_get_block() if necessary, which may fail due to metadata corruption or other reasons. This has been there all along, but improved sanity checks and error handling may have made it more reproducible in fuzzing tests. Fix this issue by adding missing error paths in nilfs_set_link(), nilfs_delete_entry(), and their caller nilfs_rename().

In the Linux kernel, the following vulnerability has been resolved: ovl: support encoding fid from inode with no alias Dmitry Safonov reported that a WARN_ON() assertion can be trigered by userspace when calling inotify_show_fdinfo() for an overlayfs watched inode, whose dentry aliases were discarded with drop_caches. The WARN_ON() assertion in inotify_show_fdinfo() was removed, because it is possible for encoding file handle to fail for other reason, but the impact of failing to encode an overlayfs file handle goes beyond this assertion. As shown in the LTP test case mentioned in the link below, failure to encode an overlayfs file handle from a non-aliased inode also leads to failure to report an fid with FAN_DELETE_SELF fanotify events. As Dmitry notes in his analyzis of the problem, ovl_encode_fh() fails if it cannot find an alias for the inode, but this failure can be fixed. ovl_encode_fh() seldom uses the alias and in the case of non-decodable file handles, as is often the case with fanotify fid info, ovl_encode_fh() never needs to use the alias to encode a file handle. Defer finding an alias until it is actually needed so ovl_encode_fh() will not fail in the common case of FAN_DELETE_SELF fanotify events.

A reachable assertion vulnerability in Trend Micro Apex One could allow an attacker to crash the program on affected installations, leading to a denial-of-service (DoS). Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

The KVM subsystem in the Linux kernel through 4.13.3 allows guest OS users to cause a denial of service (assertion failure, and hypervisor hang or crash) via an out-of bounds guest_irq value, related to arch/x86/kvm/vmx.c and virt/kvm/eventfd.c.

QEMU (aka Quick Emulator) built with a VMWARE VMXNET3 paravirtual NIC emulator support is vulnerable to crash issue. It could occur while reading Interrupt Mask Registers (IMR). A privileged (CAP_SYS_RAWIO) guest user could use this flaw to crash the QEMU process instance resulting in DoS.

In the Linux kernel, the following vulnerability has been resolved: ubifs: ubifs_releasepage: Remove ubifs_assert(0) to valid this process There are two states for ubifs writing pages: 1. Dirty, Private 2. Not Dirty, Not Private The normal process cannot go to ubifs_releasepage() which means there exists pages being private but not dirty. Reproducer[1] shows that it could occur (which maybe related to [2]) with following process: PA PB PC lock(page)[PA] ubifs_write_end attach_page_private // set Private __set_page_dirty_nobuffers // set Dirty unlock(page) write_cache_pages[PA] lock(page) clear_page_dirty_for_io(page) // clear Dirty ubifs_writepage do_truncation[PB] truncate_setsize i_size_write(inode, newsize) // newsize = 0 i_size = i_size_read(inode) // i_size = 0 end_index = i_size >> PAGE_SHIFT if (page->index > end_index) goto out // jump out: unlock(page) // Private, Not Dirty generic_fadvise[PC] lock(page) invalidate_inode_page try_to_release_page ubifs_releasepage ubifs_assert(c, 0) // bad assertion! unlock(page) truncate_pagecache[PB] Then we may get following assertion failed: UBIFS error (ubi0:0 pid 1683): ubifs_assert_failed [ubifs]: UBIFS assert failed: 0, in fs/ubifs/file.c:1513 UBIFS warning (ubi0:0 pid 1683): ubifs_ro_mode [ubifs]: switched to read-only mode, error -22 CPU: 2 PID: 1683 Comm: aa Not tainted 5.16.0-rc5-00184-g0bca5994cacc-dirty #308 Call Trace: dump_stack+0x13/0x1b ubifs_ro_mode+0x54/0x60 [ubifs] ubifs_assert_failed+0x4b/0x80 [ubifs] ubifs_releasepage+0x67/0x1d0 [ubifs] try_to_release_page+0x57/0xe0 invalidate_inode_page+0xfb/0x130 __invalidate_mapping_pages+0xb9/0x280 invalidate_mapping_pagevec+0x12/0x20 generic_fadvise+0x303/0x3c0 ksys_fadvise64_64+0x4c/0xb0 [1] https://bugzilla.kernel.org/show_bug.cgi?id=215373 [2] https://linux-mtd.infradead.narkive.com/NQoBeT1u/patch-rfc-ubifs-fix-assert-failed-in-ubifs-set-page-dirty

In the Linux kernel, the following vulnerability has been resolved: ALSA: ymfpci: Fix BUG_ON in probe function The snd_dma_buffer.bytes field now contains the aligned size, which this snd_BUG_ON() did not account for, resulting in the following: [ 9.625915] ------------[ cut here ]------------ [ 9.633440] WARNING: CPU: 0 PID: 126 at sound/pci/ymfpci/ymfpci_main.c:2168 snd_ymfpci_create+0x681/0x698 [snd_ymfpci] [ 9.648926] Modules linked in: snd_ymfpci(+) snd_intel_dspcfg kvm(+) snd_intel_sdw_acpi snd_ac97_codec snd_mpu401_uart snd_opl3_lib irqbypass snd_hda_codec gameport snd_rawmidi crct10dif_pclmul crc32_pclmul cfg80211 snd_hda_core polyval_clmulni polyval_generic gf128mul snd_seq_device ghash_clmulni_intel snd_hwdep ac97_bus sha512_ssse3 rfkill snd_pcm aesni_intel tg3 snd_timer crypto_simd snd mxm_wmi libphy cryptd k10temp fam15h_power pcspkr soundcore sp5100_tco wmi acpi_cpufreq mac_hid dm_multipath sg loop fuse dm_mod bpf_preload ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 sr_mod cdrom ata_generic pata_acpi firewire_ohci crc32c_intel firewire_core xhci_pci crc_itu_t pata_via xhci_pci_renesas floppy [ 9.711849] CPU: 0 PID: 126 Comm: kworker/0:2 Not tainted 6.1.21-1-lts #1 08d2e5ece03136efa7c6aeea9a9c40916b1bd8da [ 9.722200] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 9.732204] Workqueue: events work_for_cpu_fn [ 9.736580] RIP: 0010:snd_ymfpci_create+0x681/0x698 [snd_ymfpci] [ 9.742594] Code: 8c c0 4c 89 e2 48 89 df 48 c7 c6 92 c6 8c c0 e8 15 d0 e9 ff 48 83 c4 08 44 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f e9 d3 7a 33 e3 <0f> 0b e9 cb fd ff ff 41 bd fb ff ff ff eb db 41 bd f4 ff ff ff eb [ 9.761358] RSP: 0018:ffffab64804e7da0 EFLAGS: 00010287 [ 9.766594] RAX: ffff8fa2df06c400 RBX: ffff8fa3073a8000 RCX: ffff8fa303fbc4a8 [ 9.773734] RDX: ffff8fa2df06d000 RSI: 0000000000000010 RDI: 0000000000000020 [ 9.780876] RBP: ffff8fa300b5d0d0 R08: ffff8fa3073a8e50 R09: 00000000df06bf00 [ 9.788018] R10: ffff8fa2df06bf00 R11: 00000000df068200 R12: ffff8fa3073a8918 [ 9.795159] R13: 0000000000000000 R14: 0000000000000080 R15: ffff8fa2df068200 [ 9.802317] FS: 0000000000000000(0000) GS:ffff8fa9fec00000(0000) knlGS:0000000000000000 [ 9.810414] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9.816158] CR2: 000055febaf66500 CR3: 0000000101a2e000 CR4: 00000000000406f0 [ 9.823301] Call Trace: [ 9.825747] <TASK> [ 9.827889] snd_card_ymfpci_probe+0x194/0x950 [snd_ymfpci b78a5fe64b5663a6390a909c67808567e3e73615] [ 9.837030] ? finish_task_switch.isra.0+0x90/0x2d0 [ 9.841918] local_pci_probe+0x45/0x80 [ 9.845680] work_for_cpu_fn+0x1a/0x30 [ 9.849431] process_one_work+0x1c7/0x380 [ 9.853464] worker_thread+0x1af/0x390 [ 9.857225] ? rescuer_thread+0x3b0/0x3b0 [ 9.861254] kthread+0xde/0x110 [ 9.864414] ? kthread_complete_and_exit+0x20/0x20 [ 9.869210] ret_from_fork+0x22/0x30 [ 9.872792] </TASK> [ 9.874985] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new This patch enhances error handling in scenarios with RTS (Request to Send) messages arriving closely. It replaces the less informative WARN_ON_ONCE backtraces with a new error handling method. This provides clearer error messages and allows for the early termination of problematic sessions. Previously, sessions were only released at the end of j1939_xtp_rx_rts(). Potentially this could be reproduced with something like: testj1939 -r vcan0:0x80 & while true; do # send first RTS cansend vcan0 18EC8090#1014000303002301; # send second RTS cansend vcan0 18EC8090#1014000303002301; # send abort cansend vcan0 18EC8090#ff00000000002301; done

In the Linux kernel, the following vulnerability has been resolved: cpu/hotplug: Don't offline the last non-isolated CPU If a system has isolated CPUs via the "isolcpus=" command line parameter, then an attempt to offline the last housekeeping CPU will result in a WARN_ON() when rebuilding the scheduler domains and a subsequent panic due to and unhandled empty CPU mas in partition_sched_domains_locked(). cpuset_hotplug_workfn() rebuild_sched_domains_locked() ndoms = generate_sched_domains(&doms, &attr); cpumask_and(doms[0], top_cpuset.effective_cpus, housekeeping_cpumask(HK_FLAG_DOMAIN)); Thus results in an empty CPU mask which triggers the warning and then the subsequent crash: WARNING: CPU: 4 PID: 80 at kernel/sched/topology.c:2366 build_sched_domains+0x120c/0x1408 Call trace: build_sched_domains+0x120c/0x1408 partition_sched_domains_locked+0x234/0x880 rebuild_sched_domains_locked+0x37c/0x798 rebuild_sched_domains+0x30/0x58 cpuset_hotplug_workfn+0x2a8/0x930 Unable to handle kernel paging request at virtual address fffe80027ab37080 partition_sched_domains_locked+0x318/0x880 rebuild_sched_domains_locked+0x37c/0x798 Aside of the resulting crash, it does not make any sense to offline the last last housekeeping CPU. Prevent this by masking out the non-housekeeping CPUs when selecting a target CPU for initiating the CPU unplug operation via the work queue.

In the Linux kernel, the following vulnerability has been resolved: btrfs: set_page_extent_mapped after read_folio in btrfs_cont_expand While trying to get the subpage blocksize tests running, I hit the following panic on generic/476 assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229 kernel BUG at fs/btrfs/subpage.c:229! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 1 PID: 1453 Comm: fsstress Not tainted 6.4.0-rc7+ #12 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20230301gitf80f052277c8-26.fc38 03/01/2023 pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : btrfs_subpage_assert+0xbc/0xf0 lr : btrfs_subpage_assert+0xbc/0xf0 Call trace: btrfs_subpage_assert+0xbc/0xf0 btrfs_subpage_clear_checked+0x38/0xc0 btrfs_page_clear_checked+0x48/0x98 btrfs_truncate_block+0x5d0/0x6a8 btrfs_cont_expand+0x5c/0x528 btrfs_write_check.isra.0+0xf8/0x150 btrfs_buffered_write+0xb4/0x760 btrfs_do_write_iter+0x2f8/0x4b0 btrfs_file_write_iter+0x1c/0x30 do_iter_readv_writev+0xc8/0x158 do_iter_write+0x9c/0x210 vfs_iter_write+0x24/0x40 iter_file_splice_write+0x224/0x390 direct_splice_actor+0x38/0x68 splice_direct_to_actor+0x12c/0x260 do_splice_direct+0x90/0xe8 generic_copy_file_range+0x50/0x90 vfs_copy_file_range+0x29c/0x470 __arm64_sys_copy_file_range+0xcc/0x498 invoke_syscall.constprop.0+0x80/0xd8 do_el0_svc+0x6c/0x168 el0_svc+0x50/0x1b0 el0t_64_sync_handler+0x114/0x120 el0t_64_sync+0x194/0x198 This happens because during btrfs_cont_expand we'll get a page, set it as mapped, and if it's not Uptodate we'll read it. However between the read and re-locking the page we could have called release_folio() on the page, but left the page in the file mapping. release_folio() can clear the page private, and thus further down we blow up when we go to modify the subpage bits. Fix this by putting the set_page_extent_mapped() after the read. This is safe because read_folio() will call set_page_extent_mapped() before it does the read, and then if we clear page private but leave it on the mapping we're completely safe re-setting set_page_extent_mapped(). With this patch I can now run generic/476 without panicing.

cordova-plugin-fingerprint-aio is a plugin provides a single and simple interface for accessing fingerprint APIs on both Android 6+ and iOS. In versions prior to 5.0.1 The exported activity `de.niklasmerz.cordova.biometric.BiometricActivity` can cause the app to crash. This vulnerability occurred because the activity didn't handle the case where it is requested with invalid or empty data which results in a crash. Any third party app can constantly call this activity with no permission. A 3rd party app/attacker using event listener can continually stop the app from working and make the victim unable to open it. Version 5.0.1 of the cordova-plugin-fingerprint-aio doesn't export the activity anymore and is no longer vulnerable. If you want to fix older versions change the attribute android:exported in plugin.xml to false. Please upgrade to version 5.0.1 as soon as possible.

TensorFlow is an open source platform for machine learning. In affected versions if `tf.summary.create_file_writer` is called with non-scalar arguments code crashes due to a `CHECK`-fail. The fix will be included in TensorFlow 2.7.0. We will also cherrypick this commit on TensorFlow 2.6.1, TensorFlow 2.5.2, and TensorFlow 2.4.4, as these are also affected and still in supported range.

Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. Prior to version 0.9-rc4, any unprivileged local user can crash avahi-daemon by sending a single D-Bus method call with conflicting publish flags. This issue has been patched in version 0.9-rc4.

TensorFlow is an end-to-end open source platform for machine learning. In affected versions providing a negative element to `num_elements` list argument of `tf.raw_ops.TensorListReserve` causes the runtime to abort the process due to reallocating a `std::vector` to have a negative number of elements. The [implementation](https://github.com/tensorflow/tensorflow/blob/8d72537c6abf5a44103b57b9c2e22c14f5f49698/tensorflow/core/kernels/list_kernels.cc#L312) calls `std::vector.resize()` with the new size controlled by input given by the user, without checking that this input is valid. We have patched the issue in GitHub commit 8a6e874437670045e6c7dc6154c7412b4a2135e2. The fix will be included in TensorFlow 2.6.0. We will also cherrypick this commit on TensorFlow 2.5.1, TensorFlow 2.4.3, and TensorFlow 2.3.4, as these are also affected and still in supported range.

A vulnerability was found in Avahi. A reachable assertion exists in the dbus_set_host_name function.

A vulnerability was found in Avahi, where a reachable assertion exists in avahi_dns_packet_append_record.

A vulnerability was found in Avahi. A reachable assertion exists in the avahi_alternative_host_name() function.

A flaw was found in avahi 0.8-5. A reachable assertion is present in avahi_s_host_name_resolver_start function allowing a local attacker to crash the avahi service by requesting hostname resolutions through the avahi socket or dbus methods for invalid hostnames. The highest threat from this vulnerability is to the service availability.

In the Linux kernel, the following vulnerability has been resolved: fs: relax assertions on failure to encode file handles Encoding file handles is usually performed by a filesystem >encode_fh() method that may fail for various reasons. The legacy users of exportfs_encode_fh(), namely, nfsd and name_to_handle_at(2) syscall are ready to cope with the possibility of failure to encode a file handle. There are a few other users of exportfs_encode_{fh,fid}() that currently have a WARN_ON() assertion when ->encode_fh() fails. Relax those assertions because they are wrong. The second linked bug report states commit 16aac5ad1fa9 ("ovl: support encoding non-decodable file handles") in v6.6 as the regressing commit, but this is not accurate. The aforementioned commit only increases the chances of the assertion and allows triggering the assertion with the reproducer using overlayfs, inotify and drop_caches. Triggering this assertion was always possible with other filesystems and other reasons of ->encode_fh() failures and more particularly, it was also possible with the exact same reproducer using overlayfs that is mounted with options index=on,nfs_export=on also on kernels < v6.6. Therefore, I am not listing the aforementioned commit as a Fixes commit. Backport hint: this patch will have a trivial conflict applying to v6.6.y, and other trivial conflicts applying to stable kernels < v6.6.

In the Linux kernel, the following vulnerability has been resolved: dma-buf/sync_file: Don't leak fences on merge failure Each add_fence() call does a dma_fence_get() on the relevant fence. In the error path, we weren't calling dma_fence_put() so all those fences got leaked. Also, in the krealloc_array failure case, we weren't freeing the fences array. Instead, ensure that i and fences are always zero-initialized and dma_fence_put() all the fences and kfree(fences) on every error path.

In the Linux kernel, the following vulnerability has been resolved: PM: sleep: Drop spurious WARN_ON() from pm_restore_gfp_mask() Commit 35e4a69b2003f ("PM: sleep: Allow pm_restrict_gfp_mask() stacking") introduced refcount-based GFP mask management that warns when pm_restore_gfp_mask() is called with saved_gfp_count == 0. Some hibernation paths call pm_restore_gfp_mask() defensively where the GFP mask may or may not be restricted depending on the execution path. For example, the uswsusp interface invokes it in SNAPSHOT_CREATE_IMAGE, SNAPSHOT_UNFREEZE, and snapshot_release(). Before the stacking change this was a silent no-op; it now triggers a spurious WARNING. Remove the WARN_ON() wrapper from the !saved_gfp_count check while retaining the check itself, so that defensive calls remain harmless without producing false warnings. [ rjw: Subject tweak ]

In the Linux kernel, the following vulnerability has been resolved: drbd: fix "LOGIC BUG" in drbd_al_begin_io_nonblock() Even though we check that we "should" be able to do lc_get_cumulative() while holding the device->al_lock spinlock, it may still fail, if some other code path decided to do lc_try_lock() with bad timing. If that happened, we logged "LOGIC BUG for enr=...", but still did not return an error. The rest of the code now assumed that this request has references for the relevant activity log extents. The implcations are that during an active resync, mutual exclusivity of resync versus application IO is not guaranteed. And a potential crash at this point may not realizs that these extents could have been target of in-flight IO and would need to be resynced just in case. Also, once the request completes, it will give up activity log references it does not even hold, which will trigger a BUG_ON(refcnt == 0) in lc_put(). Fix: Do not crash the kernel for a condition that is harmless during normal operation: also catch "e->refcnt == 0", not only "e == NULL" when being noisy about "al_complete_io() called on inactive extent %u\n". And do not try to be smart and "guess" whether something will work, then be surprised when it does not. Deal with the fact that it may or may not work. If it does not, remember a possible "partially in activity log" state (only possible for requests that cross extent boundaries), and return an error code from drbd_al_begin_io_nonblock(). A latter call for the same request will then resume from where we left off.

In the Linux kernel, the following vulnerability has been resolved: ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio Replace BUG_ON() with proper error handling when inline data size exceeds PAGE_SIZE. This prevents kernel panic and allows the system to continue running while properly reporting the filesystem corruption. The error is logged via ext4_error_inode(), the buffer head is released to prevent memory leak, and -EFSCORRUPTED is returned to indicate filesystem corruption.

In the Linux kernel, the following vulnerability has been resolved: ipv6: BUG() in pskb_expand_head() as part of calipso_skbuff_setattr() There exists a kernel oops caused by a BUG_ON(nhead < 0) at net/core/skbuff.c:2232 in pskb_expand_head(). This bug is triggered as part of the calipso_skbuff_setattr() routine when skb_cow() is passed headroom > INT_MAX (i.e. (int)(skb_headroom(skb) + len_delta) < 0). The root cause of the bug is due to an implicit integer cast in __skb_cow(). The check (headroom > skb_headroom(skb)) is meant to ensure that delta = headroom - skb_headroom(skb) is never negative, otherwise we will trigger a BUG_ON in pskb_expand_head(). However, if headroom > INT_MAX and delta <= -NET_SKB_PAD, the check passes, delta becomes negative, and pskb_expand_head() is passed a negative value for nhead. Fix the trigger condition in calipso_skbuff_setattr(). Avoid passing "negative" headroom sizes to skb_cow() within calipso_skbuff_setattr() by only using skb_cow() to grow headroom. PoC: Using `netlabelctl` tool: netlabelctl map del default netlabelctl calipso add pass doi:7 netlabelctl map add default address:0::1/128 protocol:calipso,7 Then run the following PoC: int fd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_UDP); // setup msghdr int cmsg_size = 2; int cmsg_len = 0x60; struct msghdr msg; struct sockaddr_in6 dest_addr; struct cmsghdr * cmsg = (struct cmsghdr *) calloc(1, sizeof(struct cmsghdr) + cmsg_len); msg.msg_name = &dest_addr; msg.msg_namelen = sizeof(dest_addr); msg.msg_iov = NULL; msg.msg_iovlen = 0; msg.msg_control = cmsg; msg.msg_controllen = cmsg_len; msg.msg_flags = 0; // setup sockaddr dest_addr.sin6_family = AF_INET6; dest_addr.sin6_port = htons(31337); dest_addr.sin6_flowinfo = htonl(31337); dest_addr.sin6_addr = in6addr_loopback; dest_addr.sin6_scope_id = 31337; // setup cmsghdr cmsg->cmsg_len = cmsg_len; cmsg->cmsg_level = IPPROTO_IPV6; cmsg->cmsg_type = IPV6_HOPOPTS; char * hop_hdr = (char *)cmsg + sizeof(struct cmsghdr); hop_hdr[1] = 0x9; //set hop size - (0x9 + 1) * 8 = 80 sendmsg(fd, &msg, 0);

TensorFlow is an end-to-end open source platform for machine learning. An attacker can cause a denial of service by exploiting a `CHECK`-failure coming from `tf.raw_ops.LoadAndRemapMatrix`. This is because the implementation(https://github.com/tensorflow/tensorflow/blob/d94227d43aa125ad8b54115c03cece54f6a1977b/tensorflow/core/kernels/ragged_tensor_to_tensor_op.cc#L219-L222) assumes that the `ckpt_path` is always a valid scalar. However, an attacker can send any other tensor as the first argument of `LoadAndRemapMatrix`. This would cause the rank `CHECK` in `scalar<T>()()` to trigger and terminate the process. The fix will be included in TensorFlow 2.5.0. We will also cherrypick this commit on TensorFlow 2.4.2, TensorFlow 2.3.3, TensorFlow 2.2.3 and TensorFlow 2.1.4, as these are also affected and still in supported range.

TensorFlow is an end-to-end open source platform for machine learning. An attacker can cause a denial of service by exploiting a `CHECK`-failure coming from the implementation of `tf.raw_ops.RFFT`. Eigen code operating on an empty matrix can trigger on an assertion and will cause program termination. The fix will be included in TensorFlow 2.5.0. We will also cherrypick this commit on TensorFlow 2.4.2, TensorFlow 2.3.3, TensorFlow 2.2.3 and TensorFlow 2.1.4, as these are also affected and still in supported range.

TensorFlow is an end-to-end open source platform for machine learning. An attacker can cause a denial of service by controlling the values of `num_segments` tensor argument for `UnsortedSegmentJoin`. This is because the implementation(https://github.com/tensorflow/tensorflow/blob/a2a607db15c7cd01d754d37e5448d72a13491bdb/tensorflow/core/kernels/unsorted_segment_join_op.cc#L92-L93) assumes that the `num_segments` tensor is a valid scalar. Since the tensor is empty the `CHECK` involved in `.scalar<T>()()` that checks that the number of elements is exactly 1 will be invalidated and this would result in process termination. The fix will be included in TensorFlow 2.5.0. We will also cherrypick this commit on TensorFlow 2.4.2, TensorFlow 2.3.3, TensorFlow 2.2.3 and TensorFlow 2.1.4, as these are also affected and still in supported range.

TensorFlow is an end-to-end open source platform for machine learning. Due to lack of validation in `tf.raw_ops.SparseDenseCwiseMul`, an attacker can trigger denial of service via `CHECK`-fails or accesses to outside the bounds of heap allocated data. Since the implementation(https://github.com/tensorflow/tensorflow/blob/38178a2f7a681a7835bb0912702a134bfe3b4d84/tensorflow/core/kernels/sparse_dense_binary_op_shared.cc#L68-L80) only validates the rank of the input arguments but no constraints between dimensions(https://www.tensorflow.org/api_docs/python/tf/raw_ops/SparseDenseCwiseMul), an attacker can abuse them to trigger internal `CHECK` assertions (and cause program termination, denial of service) or to write to memory outside of bounds of heap allocated tensor buffers. The fix will be included in TensorFlow 2.5.0. We will also cherrypick this commit on TensorFlow 2.4.2, TensorFlow 2.3.3, TensorFlow 2.2.3 and TensorFlow 2.1.4, as these are also affected and still in supported range.

A Reachable Assertion vulnerability in Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows a locally-based, low-privileged attacker to cause a Denial of Service (DoS). On all Junos OS and Junos OS Evolved, when a specific L2VPN command is run, RPD will crash and restart. Continued execution of this specific command will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS All versions prior to 19.3R3-S10; 20.1 versions prior to 20.1R3-S4; 20.2 versions prior to 20.2R3-S6; 20.3 versions prior to 20.3R3-S6; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S2; 21.4 versions prior to 21.4R3; 22.1 versions prior to 22.1R3; 22.2 versions prior to 22.2R2; 22.3 versions prior to 22.3R2; Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S7-EVO; 21.1 versions prior to 21.1R3-S3-EVO; 21.2 versions prior to 21.2R3-S5-EVO; 21.3 versions prior to 21.3R3-S4-EVO; 21.4 versions prior to 21.4R3-EVO; 22.1 versions prior to 22.1R3-EVO; 22.2 versions prior to 22.2R2-EVO; 22.3 versions prior to 22.3R2-EVO;

In the Linux kernel, the following vulnerability has been resolved: mm: thp: deny THP for files on anonymous inodes file_thp_enabled() incorrectly allows THP for files on anonymous inodes (e.g. guest_memfd and secretmem). These files are created via alloc_file_pseudo(), which does not call get_write_access() and leaves inode->i_writecount at 0. Combined with S_ISREG(inode->i_mode) being true, they appear as read-only regular files when CONFIG_READ_ONLY_THP_FOR_FS is enabled, making them eligible for THP collapse. Anonymous inodes can never pass the inode_is_open_for_write() check since their i_writecount is never incremented through the normal VFS open path. The right thing to do is to exclude them from THP eligibility altogether, since CONFIG_READ_ONLY_THP_FOR_FS was designed for real filesystem files (e.g. shared libraries), not for pseudo-filesystem inodes. For guest_memfd, this allows khugepaged and MADV_COLLAPSE to create large folios in the page cache via the collapse path, but the guest_memfd fault handler does not support large folios. This triggers WARN_ON_ONCE(folio_test_large(folio)) in kvm_gmem_fault_user_mapping(). For secretmem, collapse_file() tries to copy page contents through the direct map, but secretmem pages are removed from the direct map. This can result in a kernel crash: BUG: unable to handle page fault for address: ffff88810284d000 RIP: 0010:memcpy_orig+0x16/0x130 Call Trace: collapse_file hpage_collapse_scan_file madvise_collapse Secretmem is not affected by the crash on upstream as the memory failure recovery handles the failed copy gracefully, but it still triggers confusing false memory failure reports: Memory failure: 0x106d96f: recovery action for clean unevictable LRU page: Recovered Check IS_ANON_FILE(inode) in file_thp_enabled() to deny THP for all anonymous inode files.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix WARN_ON in tracing_buffers_mmap_close When a process forks, the child process copies the parent's VMAs but the user_mapped reference count is not incremented. As a result, when both the parent and child processes exit, tracing_buffers_mmap_close() is called twice. On the second call, user_mapped is already 0, causing the function to return -ENODEV and triggering a WARN_ON. Normally, this isn't an issue as the memory is mapped with VM_DONTCOPY set. But this is only a hint, and the application can call madvise(MADVISE_DOFORK) which resets the VM_DONTCOPY flag. When the application does that, it can trigger this issue on fork. Fix it by incrementing the user_mapped reference count without re-mapping the pages in the VMA's open callback.

In the Linux kernel, the following vulnerability has been resolved: libceph: replace overzealous BUG_ON in osdmap_apply_incremental() If the osdmap is (maliciously) corrupted such that the incremental osdmap epoch is different from what is expected, there is no need to BUG. Instead, just declare the incremental osdmap to be invalid.

In the Linux kernel, the following vulnerability has been resolved: drm/shmem-helper: Fix BUG_ON() on mmap(PROT_WRITE, MAP_PRIVATE) Lack of check for copy-on-write (COW) mapping in drm_gem_shmem_mmap allows users to call mmap with PROT_WRITE and MAP_PRIVATE flag causing a kernel panic due to BUG_ON in vmf_insert_pfn_prot: BUG_ON((vma->vm_flags & VM_PFNMAP) && is_cow_mapping(vma->vm_flags)); Return -EINVAL early if COW mapping is detected. This bug affects all drm drivers using default shmem helpers. It can be reproduced by this simple example: void *ptr = mmap(0, size, PROT_WRITE, MAP_PRIVATE, fd, mmap_offset); ptr[0] = 0;

In the Linux kernel, the following vulnerability has been resolved: romfs: check sb_set_blocksize() return value romfs_fill_super() ignores the return value of sb_set_blocksize(), which can fail if the requested block size is incompatible with the block device's configuration. This can be triggered by setting a loop device's block size larger than PAGE_SIZE using ioctl(LOOP_SET_BLOCK_SIZE, 32768), then mounting a romfs filesystem on that device. When sb_set_blocksize(sb, ROMBSIZE) is called with ROMBSIZE=4096 but the device has logical_block_size=32768, bdev_validate_blocksize() fails because the requested size is smaller than the device's logical block size. sb_set_blocksize() returns 0 (failure), but romfs ignores this and continues mounting. The superblock's block size remains at the device's logical block size (32768). Later, when sb_bread() attempts I/O with this oversized block size, it triggers a kernel BUG in folio_set_bh(): kernel BUG at fs/buffer.c:1582! BUG_ON(size > PAGE_SIZE); Fix by checking the return value of sb_set_blocksize() and failing the mount with -EINVAL if it returns 0.

In the Linux kernel, the following vulnerability has been resolved: iommu/io-pgtable-arm: fix size_t signedness bug in unmap path __arm_lpae_unmap() returns size_t but was returning -ENOENT (negative error code) when encountering an unmapped PTE. Since size_t is unsigned, -ENOENT (typically -2) becomes a huge positive value (0xFFFFFFFFFFFFFFFE on 64-bit systems). This corrupted value propagates through the call chain: __arm_lpae_unmap() returns -ENOENT as size_t -> arm_lpae_unmap_pages() returns it -> __iommu_unmap() adds it to iova address -> iommu_pgsize() triggers BUG_ON due to corrupted iova This can cause IOVA address overflow in __iommu_unmap() loop and trigger BUG_ON in iommu_pgsize() from invalid address alignment. Fix by returning 0 instead of -ENOENT. The WARN_ON already signals the error condition, and returning 0 (meaning "nothing unmapped") is the correct semantic for size_t return type. This matches the behavior of other io-pgtable implementations (io-pgtable-arm-v7s, io-pgtable-dart) which return 0 on error conditions.

A vulnerability was determined in jqlang jq up to 1.6. Impacted is the function run_jq_tests of the file jq_test.c of the component JSON Parser. Executing manipulation can lead to reachable assertion. The attack requires local access. The exploit has been publicly disclosed and may be utilized. Other versions might be affected as well.

In the Linux kernel, the following vulnerability has been resolved: udp: do not accept non-tunnel GSO skbs landing in a tunnel When rx-udp-gro-forwarding is enabled UDP packets might be GROed when being forwarded. If such packets might land in a tunnel this can cause various issues and udp_gro_receive makes sure this isn't the case by looking for a matching socket. This is performed in udp4/6_gro_lookup_skb but only in the current netns. This is an issue with tunneled packets when the endpoint is in another netns. In such cases the packets will be GROed at the UDP level, which leads to various issues later on. The same thing can happen with rx-gro-list. We saw this with geneve packets being GROed at the UDP level. In such case gso_size is set; later the packet goes through the geneve rx path, the geneve header is pulled, the offset are adjusted and frag_list skbs are not adjusted with regard to geneve. When those skbs hit skb_fragment, it will misbehave. Different outcomes are possible depending on what the GROed skbs look like; from corrupted packets to kernel crashes. One example is a BUG_ON[1] triggered in skb_segment while processing the frag_list. Because gso_size is wrong (geneve header was pulled) skb_segment thinks there is "geneve header size" of data in frag_list, although it's in fact the next packet. The BUG_ON itself has nothing to do with the issue. This is only one of the potential issues. Looking up for a matching socket in udp_gro_receive is fragile: the lookup could be extended to all netns (not speaking about performances) but nothing prevents those packets from being modified in between and we could still not find a matching socket. It's OK to keep the current logic there as it should cover most cases but we also need to make sure we handle tunnel packets being GROed too early. This is done by extending the checks in udp_unexpected_gso: GSO packets lacking the SKB_GSO_UDP_TUNNEL/_CSUM bits and landing in a tunnel must be segmented. [1] kernel BUG at net/core/skbuff.c:4408! RIP: 0010:skb_segment+0xd2a/0xf70 __udp_gso_segment+0xaa/0x560

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix a BUG in rt6_get_pcpu_route() under PREEMPT_RT On PREEMPT_RT kernels, after rt6_get_pcpu_route() returns NULL, the current task can be preempted. Another task running on the same CPU may then execute rt6_make_pcpu_route() and successfully install a pcpu_rt entry. When the first task resumes execution, its cmpxchg() in rt6_make_pcpu_route() will fail because rt6i_pcpu is no longer NULL, triggering the BUG_ON(prev). It's easy to reproduce it by adding mdelay() after rt6_get_pcpu_route(). Using preempt_disable/enable is not appropriate here because ip6_rt_pcpu_alloc() may sleep. Fix this by handling the cmpxchg() failure gracefully on PREEMPT_RT: free our allocation and return the existing pcpu_rt installed by another task. The BUG_ON is replaced by WARN_ON_ONCE for non-PREEMPT_RT kernels where such races should not occur.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix WARN_ON in iommu probe path Commit 1a75cc710b95 ("iommu/vt-d: Use rbtree to track iommu probed devices") adds all devices probed by the iommu driver in a rbtree indexed by the source ID of each device. It assumes that each device has a unique source ID. This assumption is incorrect and the VT-d spec doesn't state this requirement either. The reason for using a rbtree to track devices is to look up the device with PCI bus and devfunc in the paths of handling ATS invalidation time out error and the PRI I/O page faults. Both are PCI ATS feature related. Only track the devices that have PCI ATS capabilities in the rbtree to avoid unnecessary WARN_ON in the iommu probe path. Otherwise, on some platforms below kernel splat will be displayed and the iommu probe results in failure. WARNING: CPU: 3 PID: 166 at drivers/iommu/intel/iommu.c:158 intel_iommu_probe_device+0x319/0xd90 Call Trace: <TASK> ? __warn+0x7e/0x180 ? intel_iommu_probe_device+0x319/0xd90 ? report_bug+0x1f8/0x200 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? intel_iommu_probe_device+0x319/0xd90 ? debug_mutex_init+0x37/0x50 __iommu_probe_device+0xf2/0x4f0 iommu_probe_device+0x22/0x70 iommu_bus_notifier+0x1e/0x40 notifier_call_chain+0x46/0x150 blocking_notifier_call_chain+0x42/0x60 bus_notify+0x2f/0x50 device_add+0x5ed/0x7e0 platform_device_add+0xf5/0x240 mfd_add_devices+0x3f9/0x500 ? preempt_count_add+0x4c/0xa0 ? up_write+0xa2/0x1b0 ? __debugfs_create_file+0xe3/0x150 intel_lpss_probe+0x49f/0x5b0 ? pci_conf1_write+0xa3/0xf0 intel_lpss_pci_probe+0xcf/0x110 [intel_lpss_pci] pci_device_probe+0x95/0x120 really_probe+0xd9/0x370 ? __pfx___driver_attach+0x10/0x10 __driver_probe_device+0x73/0x150 driver_probe_device+0x19/0xa0 __driver_attach+0xb6/0x180 ? __pfx___driver_attach+0x10/0x10 bus_for_each_dev+0x77/0xd0 bus_add_driver+0x114/0x210 driver_register+0x5b/0x110 ? __pfx_intel_lpss_pci_driver_init+0x10/0x10 [intel_lpss_pci] do_one_initcall+0x57/0x2b0 ? kmalloc_trace+0x21e/0x280 ? do_init_module+0x1e/0x210 do_init_module+0x5f/0x210 load_module+0x1d37/0x1fc0 ? init_module_from_file+0x86/0xd0 init_module_from_file+0x86/0xd0 idempotent_init_module+0x17c/0x230 __x64_sys_finit_module+0x56/0xb0 do_syscall_64+0x6e/0x140 entry_SYSCALL_64_after_hwframe+0x71/0x79

Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. In 0.9-rc2 and earlier, an unprivileged local users can crash avahi-daemon (with wide-area disabled) by creating record browsers with the AVAHI_LOOKUP_USE_WIDE_AREA flag set via D-Bus. This can be done by either calling the RecordBrowserNew method directly or creating hostname/address/service resolvers/browsers that create those browsers internally themselves.

A flaw was found in QEMU. An assertion failure was present in the usb_ep_get() function in hw/net/core.c when trying to get the USB endpoint from a USB device. This flaw may allow a malicious unprivileged guest user to crash the QEMU process on the host and cause a denial of service condition.

VMware ESXi (6.7 before ESXi670-202004101-SG and 6.5 before ESXi650-202005401-SG), VMware Workstation (15.x before 15.5.2) and VMware Fusion (11.x before 11.5.2) contain a denial-of-service vulnerability in the shader functionality. Successful exploitation of this issue may allow attackers with non-administrative access to a virtual machine to crash the virtual machine's vmx process leading to a denial of service condition.

In the Linux kernel, the following vulnerability has been resolved: btrfs: don't drop extent_map for free space inode on write error While running the CI for an unrelated change I hit the following panic with generic/648 on btrfs_holes_spacecache. assertion failed: block_start != EXTENT_MAP_HOLE, in fs/btrfs/extent_io.c:1385 ------------[ cut here ]------------ kernel BUG at fs/btrfs/extent_io.c:1385! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 2695096 Comm: fsstress Kdump: loaded Tainted: G W 6.8.0-rc2+ #1 RIP: 0010:__extent_writepage_io.constprop.0+0x4c1/0x5c0 Call Trace: <TASK> extent_write_cache_pages+0x2ac/0x8f0 extent_writepages+0x87/0x110 do_writepages+0xd5/0x1f0 filemap_fdatawrite_wbc+0x63/0x90 __filemap_fdatawrite_range+0x5c/0x80 btrfs_fdatawrite_range+0x1f/0x50 btrfs_write_out_cache+0x507/0x560 btrfs_write_dirty_block_groups+0x32a/0x420 commit_cowonly_roots+0x21b/0x290 btrfs_commit_transaction+0x813/0x1360 btrfs_sync_file+0x51a/0x640 __x64_sys_fdatasync+0x52/0x90 do_syscall_64+0x9c/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0x76 This happens because we fail to write out the free space cache in one instance, come back around and attempt to write it again. However on the second pass through we go to call btrfs_get_extent() on the inode to get the extent mapping. Because this is a new block group, and with the free space inode we always search the commit root to avoid deadlocking with the tree, we find nothing and return a EXTENT_MAP_HOLE for the requested range. This happens because the first time we try to write the space cache out we hit an error, and on an error we drop the extent mapping. This is normal for normal files, but the free space cache inode is special. We always expect the extent map to be correct. Thus the second time through we end up with a bogus extent map. Since we're deprecating this feature, the most straightforward way to fix this is to simply skip dropping the extent map range for this failed range. I shortened the test by using error injection to stress the area to make it easier to reproduce. With this patch in place we no longer panic with my error injection test.

In the Linux kernel, the following vulnerability has been resolved: btrfs: zlib: fix avail_in bytes for s390 zlib HW compression path Since the input data length passed to zlib_compress_folios() can be arbitrary, always setting strm.avail_in to a multiple of PAGE_SIZE may cause read-in bytes to exceed the input range. Currently this triggers an assert in btrfs_compress_folios() on the debug kernel (see below). Fix strm.avail_in calculation for S390 hardware acceleration path. assertion failed: *total_in <= orig_len, in fs/btrfs/compression.c:1041 ------------[ cut here ]------------ kernel BUG at fs/btrfs/compression.c:1041! monitor event: 0040 ilc:2 [#1] PREEMPT SMP CPU: 16 UID: 0 PID: 325 Comm: kworker/u273:3 Not tainted 6.13.0-20241204.rc1.git6.fae3b21430ca.300.fc41.s390x+debug #1 Hardware name: IBM 3931 A01 703 (z/VM 7.4.0) Workqueue: btrfs-delalloc btrfs_work_helper Krnl PSW : 0704d00180000000 0000021761df6538 (btrfs_compress_folios+0x198/0x1a0) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 0000000080000000 0000000000000001 0000000000000047 0000000000000000 0000000000000006 ffffff01757bb000 000001976232fcc0 000000000000130c 000001976232fcd0 000001976232fcc8 00000118ff4a0e30 0000000000000001 00000111821ab400 0000011100000000 0000021761df6534 000001976232fb58 Krnl Code: 0000021761df6528: c020006f5ef4 larl %r2,0000021762be2310 0000021761df652e: c0e5ffbd09d5 brasl %r14,00000217615978d8 #0000021761df6534: af000000 mc 0,0 >0000021761df6538: 0707 bcr 0,%r7 0000021761df653a: 0707 bcr 0,%r7 0000021761df653c: 0707 bcr 0,%r7 0000021761df653e: 0707 bcr 0,%r7 0000021761df6540: c004004bb7ec brcl 0,000002176276d518 Call Trace: [<0000021761df6538>] btrfs_compress_folios+0x198/0x1a0 ([<0000021761df6534>] btrfs_compress_folios+0x194/0x1a0) [<0000021761d97788>] compress_file_range+0x3b8/0x6d0 [<0000021761dcee7c>] btrfs_work_helper+0x10c/0x160 [<0000021761645760>] process_one_work+0x2b0/0x5d0 [<000002176164637e>] worker_thread+0x20e/0x3e0 [<000002176165221a>] kthread+0x15a/0x170 [<00000217615b859c>] __ret_from_fork+0x3c/0x60 [<00000217626e72d2>] ret_from_fork+0xa/0x38 INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000021761597924>] _printk+0x4c/0x58 Kernel panic - not syncing: Fatal exception: panic_on_oops

In the Linux kernel, the following vulnerability has been resolved: media: atomisp: Add check for rgby_data memory allocation failure In ia_css_3a_statistics_allocate(), there is no check on the allocation result of the rgby_data memory. If rgby_data is not successfully allocated, it may trigger the assert(host_stats->rgby_data) assertion in ia_css_s3a_hmem_decode(). Adding a check to fix this potential issue.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_socket: remove WARN_ON_ONCE on maximum cgroup level cgroup maximum depth is INT_MAX by default, there is a cgroup toggle to restrict this maximum depth to a more reasonable value not to harm performance. Remove unnecessary WARN_ON_ONCE which is reachable from userspace.

In the Linux kernel, the following vulnerability has been resolved: btrfs: don't readahead the relocation inode on RST On relocation we're doing readahead on the relocation inode, but if the filesystem is backed by a RAID stripe tree we can get ENOENT (e.g. due to preallocated extents not being mapped in the RST) from the lookup. But readahead doesn't handle the error and submits invalid reads to the device, causing an assertion in the scatter-gather list code: BTRFS info (device nvme1n1): balance: start -d -m -s BTRFS info (device nvme1n1): relocating block group 6480920576 flags data|raid0 BTRFS error (device nvme1n1): cannot find raid-stripe for logical [6481928192, 6481969152] devid 2, profile raid0 ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:115! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 1012 Comm: btrfs Not tainted 6.10.0-rc7+ #567 RIP: 0010:__blk_rq_map_sg+0x339/0x4a0 RSP: 0018:ffffc90001a43820 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffea00045d4802 RDX: 0000000117520000 RSI: 0000000000000000 RDI: ffff8881027d1000 RBP: 0000000000003000 R08: ffffea00045d4902 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000001000 R12: ffff8881003d10b8 R13: ffffc90001a438f0 R14: 0000000000000000 R15: 0000000000003000 FS: 00007fcc048a6900(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002cd11000 CR3: 00000001109ea001 CR4: 0000000000370eb0 Call Trace: <TASK> ? __die_body.cold+0x14/0x25 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x65/0x80 ? __blk_rq_map_sg+0x339/0x4a0 ? exc_invalid_op+0x50/0x70 ? __blk_rq_map_sg+0x339/0x4a0 ? asm_exc_invalid_op+0x1a/0x20 ? __blk_rq_map_sg+0x339/0x4a0 nvme_prep_rq.part.0+0x9d/0x770 nvme_queue_rq+0x7d/0x1e0 __blk_mq_issue_directly+0x2a/0x90 ? blk_mq_get_budget_and_tag+0x61/0x90 blk_mq_try_issue_list_directly+0x56/0xf0 blk_mq_flush_plug_list.part.0+0x52b/0x5d0 __blk_flush_plug+0xc6/0x110 blk_finish_plug+0x28/0x40 read_pages+0x160/0x1c0 page_cache_ra_unbounded+0x109/0x180 relocate_file_extent_cluster+0x611/0x6a0 ? btrfs_search_slot+0xba4/0xd20 ? balance_dirty_pages_ratelimited_flags+0x26/0xb00 relocate_data_extent.constprop.0+0x134/0x160 relocate_block_group+0x3f2/0x500 btrfs_relocate_block_group+0x250/0x430 btrfs_relocate_chunk+0x3f/0x130 btrfs_balance+0x71b/0xef0 ? kmalloc_trace_noprof+0x13b/0x280 btrfs_ioctl+0x2c2e/0x3030 ? kvfree_call_rcu+0x1e6/0x340 ? list_lru_add_obj+0x66/0x80 ? mntput_no_expire+0x3a/0x220 __x64_sys_ioctl+0x96/0xc0 do_syscall_64+0x54/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fcc04514f9b Code: Unable to access opcode bytes at 0x7fcc04514f71. RSP: 002b:00007ffeba923370 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fcc04514f9b RDX: 00007ffeba923460 RSI: 00000000c4009420 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000013 R09: 0000000000000001 R10: 00007fcc043fbba8 R11: 0000000000000246 R12: 00007ffeba924fc5 R13: 00007ffeba923460 R14: 0000000000000002 R15: 00000000004d4bb0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:__blk_rq_map_sg+0x339/0x4a0 RSP: 0018:ffffc90001a43820 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffea00045d4802 RDX: 0000000117520000 RSI: 0000000000000000 RDI: ffff8881027d1000 RBP: 0000000000003000 R08: ffffea00045d4902 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000001000 R12: ffff8881003d10b8 R13: ffffc90001a438f0 R14: 0000000000000000 R15: 0000000000003000 FS: 00007fcc048a6900(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcc04514f71 CR3: 00000001109ea001 CR4: 0000000000370eb0 Kernel p ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix defrag path triggering jbd2 ASSERT code path: ocfs2_ioctl_move_extents ocfs2_move_extents ocfs2_defrag_extent __ocfs2_move_extent + ocfs2_journal_access_di + ocfs2_split_extent //sub-paths call jbd2_journal_restart + ocfs2_journal_dirty //crash by jbs2 ASSERT crash stacks: PID: 11297 TASK: ffff974a676dcd00 CPU: 67 COMMAND: "defragfs.ocfs2" #0 [ffffb25d8dad3900] machine_kexec at ffffffff8386fe01 #1 [ffffb25d8dad3958] __crash_kexec at ffffffff8395959d #2 [ffffb25d8dad3a20] crash_kexec at ffffffff8395a45d #3 [ffffb25d8dad3a38] oops_end at ffffffff83836d3f #4 [ffffb25d8dad3a58] do_trap at ffffffff83833205 #5 [ffffb25d8dad3aa0] do_invalid_op at ffffffff83833aa6 #6 [ffffb25d8dad3ac0] invalid_op at ffffffff84200d18 [exception RIP: jbd2_journal_dirty_metadata+0x2ba] RIP: ffffffffc09ca54a RSP: ffffb25d8dad3b70 RFLAGS: 00010207 RAX: 0000000000000000 RBX: ffff9706eedc5248 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff97337029ea28 RDI: ffff9706eedc5250 RBP: ffff9703c3520200 R8: 000000000f46b0b2 R9: 0000000000000000 R10: 0000000000000001 R11: 00000001000000fe R12: ffff97337029ea28 R13: 0000000000000000 R14: ffff9703de59bf60 R15: ffff9706eedc5250 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb25d8dad3ba8] ocfs2_journal_dirty at ffffffffc137fb95 [ocfs2] #8 [ffffb25d8dad3be8] __ocfs2_move_extent at ffffffffc139a950 [ocfs2] #9 [ffffb25d8dad3c80] ocfs2_defrag_extent at ffffffffc139b2d2 [ocfs2] Analysis This bug has the same root cause of 'commit 7f27ec978b0e ("ocfs2: call ocfs2_journal_access_di() before ocfs2_journal_dirty() in ocfs2_write_end_nolock()")'. For this bug, jbd2_journal_restart() is called by ocfs2_split_extent() during defragmenting. How to fix For ocfs2_split_extent() can handle journal operations totally by itself. Caller doesn't need to call journal access/dirty pair, and caller only needs to call journal start/stop pair. The fix method is to remove journal access/dirty from __ocfs2_move_extent(). The discussion for this patch: https://oss.oracle.com/pipermail/ocfs2-devel/2023-February/000647.html

Redis is an open source, in-memory database that persists on disk. Authenticated users can use the `HINCRBYFLOAT` command to create an invalid hash field that will crash Redis on access in affected versions. This issue has been addressed in in versions 7.0.11, 6.2.12, and 6.0.19. Users are advised to upgrade. There are no known workarounds for this issue.

In the Linux kernel, the following vulnerability has been resolved: btrfs: handle errors from btrfs_dec_ref() properly In walk_up_proc() we BUG_ON(ret) from btrfs_dec_ref(). This is incorrect, we have proper error handling here, return the error.