A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected is the function ipv6cmd of the file /goform/setIpv6. The manipulation of the argument Ipv6PriDns/Ipv6SecDns/Ipv6StaticGateway/LanIpv6Addr/LanPrefixLen/pppoeUser/pppoePass/pppoeIdleTime/pppoeRedialPeriod/Ipv6in4_PrefixLen/LocalIpv6/RemoteIpv4/LanIPv6_Prefix/LanPrefixLen/ipv6to4Relay/ipv6rdRelay/tunrd_PrefixLen/wan_UseLinkLocal/Ipv6StaticIp/Ipv6PrefixLen leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function NTP of the file /goform/NTP. The manipulation of the argument manual_year_select/manual_month_select/manual_day_select/manual_hour_select/manual_min_select/manual_sec_select leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been declared as critical. Affected by this vulnerability is the function WPS of the file /goform/WPS. The manipulation of the argument PIN leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been rated as critical. Affected by this issue is the function verifyFacebookLike of the file /goform/verifyFacebookLike. The manipulation of the argument uid/accessToken leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This affects the function RP_setBasicAuto of the file /goform/RP_setBasicAuto. The manipulation of the argument staticIp/staticNetmask leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAM. Data entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal, it enters a code path that continues until it reaches offset 0x0042B5C4 in the 'start_lltd' function. Within the 'start_lltd' function, a 'nvram_get' call is used to obtain the value of the user-controlled 'machine_name' NVRAM entry. This value is then entered directly into a command intended to write the host name to a file and subsequently executed.

Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAMData entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04). Specially crafted entries to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send an authenticated HTTP request to trigger this vulnerability. Data entered into the 'Domain Name' input field through the web portal is submitted to apply.cgi as the value to the 'wan_domain' POST parameter. The wan_domain data goes through the nvram_set process described above. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

A vulnerability was found in Linksys WRT54G 4.21.5. It has been rated as critical. Affected by this issue is the function validate_services_port of the file /apply.cgi of the component POST Parameter Handler. The manipulation of the argument services_array leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A stack-based buffer overflow vulnerability exists in the tmUnblock.cgi endpoint of the Linksys WRT120N wireless router. The vulnerability is triggered by sending a specially crafted HTTP POST request with an overly long TM_Block_URL parameter to the endpoint. By exploiting this flaw, an unauthenticated remote attacker can overwrite memory in a controlled manner, enabling them to temporarily reset the administrator password of the device to a blank value. This grants unauthorized access to the router’s web management interface without requiring valid credentials.

Stack-based buffer overflow in the Microsoft Message Queuing (MSMQ) service in Microsoft Windows 2000 Server SP4, Windows 2000 Professional SP4, and Windows XP SP2 allows attackers to execute arbitrary code via a long string in an opnum 0x06 RPC call to port 2103. NOTE: this is remotely exploitable on Windows 2000 Server.

Multiple buffer overflows in Ipswitch IMail before 2006.21 allow remote attackers or authenticated users to execute arbitrary code via (1) the authentication feature in IMailsec.dll, which triggers heap corruption in the IMail Server, or (2) a long SUBSCRIBE IMAP command, which triggers a stack-based buffer overflow in the IMAP Daemon.

A security flaw has been discovered in Tenda AC20 16.03.08.12. The impacted element is the function formSetRebootTimer of the file /goform/SetSysAutoRebbotCfg of the component httpd. Performing a manipulation of the argument rebootTime results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability has been found in D-Link DIR-822K and DWR-M920 1.00_20250513164613/1.1.50. This vulnerability affects unknown code of the file /boafrm/formFirewallAdv. Such manipulation of the argument submit-url leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in Tenda AC20 up to 16.03.08.12. The impacted element is an unknown function of the file /goform/WifiExtraSet. The manipulation of the argument wpapsk_crypto results in buffer overflow. The attack can be launched remotely. The exploit is now public and may be used.

A vulnerability was found in D-Link DIR-822K 1.00. This issue affects the function sub_455524 of the file /boafrm/formNtp. Performing manipulation of the argument submit-url results in buffer overflow. Remote exploitation of the attack is possible. The exploit has been made public and could be used.

A security vulnerability has been detected in D-Link DWR-M960 1.01.07. Affected is the function sub_457C5C of the file /boafrm/formWsc. Such manipulation of the argument save_apply leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed publicly and may be used.

A weakness has been identified in D-Link DWR-M920 1.1.50. This affects the function sub_41C7FC of the file /boafrm/formPinManageSetup. This manipulation of the argument submit-url causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be exploited.

A security vulnerability has been detected in Tenda CH22 1.0.0.1. This impacts the function fromPptpUserSetting of the file /goform/PPTPUserSetting. The manipulation of the argument delno leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used.

A security flaw has been discovered in D-Link DIR-822K and DWR-M920 1.00_20250513164613/1.1.50. The impacted element is an unknown function of the file /boafrm/formWlEncrypt. The manipulation of the argument submit-url results in buffer overflow. The attack may be performed from remote. The exploit has been released to the public and may be exploited.

A vulnerability was found in D-Link DIR-816L 2_06_b09_beta. This vulnerability affects the function scandir_main of the file /portal/__ajax_exporer.sgi. The manipulation of the argument en results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical has been found in TOTOLINK X18 9.1.0cu.2024_B20220329. Affected is the function setPasswordCfg of the file /cgi-bin/cstecgi.cgi. The manipulation as part of String leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in D-Link DIR-822K and DWR-M920 1.00_20250513164613/1.1.50. Impacted is an unknown function of the file /boafrm/formVpnConfigSetup. Executing manipulation of the argument submit-url can lead to buffer overflow. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized.

ALFA AIP-W512 v3.2.2.2.3 was discovered to contain an authenticated stack overflow via the torrentsindex parameter in the formBTClinetSetting function.

A vulnerability was detected in TOTOLINK A3300R 17.0.0cu.557_B20221024. This impacts the function setLanguageCfg of the file /cgi-bin/cstecgi.cgi of the component POST Parameter Handler. The manipulation of the argument lang results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used.

A flaw has been found in Tenda CH22 1.0.0.1. Affected by this issue is the function fromNatStaticSetting of the file /goform/NatStaticSetting. Executing a manipulation of the argument page can lead to buffer overflow. It is possible to launch the attack remotely. The exploit has been published and may be used.

A vulnerability was found in UTT 进取 518G up to V3v3.2.7-210919-161313. This issue affects some unknown processing of the file /goform/formTaskEdit_ap. The manipulation of the argument txtMin2 results in buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in TOTOLINK A3300R 17.0.0cu.557_B20221024. The impacted element is the function setDdnsCfg of the file /cgi-bin/cstecgi.cgi. Executing manipulation can lead to buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be exploited.

A vulnerability was identified in Tenda O3 1.0.0.10(2478). Affected by this vulnerability is the function SetValue/GetValue of the file /goform/AdvSetLanip. The manipulation of the argument lanIp leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit is publicly available and might be used.

A security flaw has been discovered in Tenda O3 1.0.0.10(2478). Affected by this issue is the function SetValue/GetValue of the file /goform/setDmzInfo. The manipulation of the argument dmzIP results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

A security vulnerability has been detected in LLM-Claw 0.1.0/0.1.1/0.1.1a/0.1.1a-p1. The affected element is the function agent_deploy_init of the file /agents/deploy/initiate.c of the component Agent Deployment. Such manipulation leads to buffer overflow. It is possible to launch the attack remotely. A patch should be applied to remediate this issue.

A weakness has been identified in Tenda AC23 16.03.07.52. This impacts the function formSetVirtualSer of the file /goform/SetVirtualServerCfg. This manipulation of the argument list causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability, which was classified as critical, has been found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615. This issue affects some unknown processing of the file /boafrm/formWirelessTbl of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Buffer overflow in the glob implementation (glob.c) in libc in NetBSD-current before 20050914, NetBSD 2.* and 3.* before 20061203, and Apple Mac OS X before 2007-004, as used by the FTP daemon and tnftpd, allows remote authenticated users to execute arbitrary code via a long pathname that results from path expansion.

A vulnerability was found in D-Link DWR-M960 1.01.07. This issue affects the function sub_46385C of the file /boafrm/formDosCfg. Performing a manipulation of the argument submit-url results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made public and could be used.

A security vulnerability has been detected in Tenda O3 1.0.0.10(2478). This vulnerability affects the function SetValue/GetValue of the file /goform/setVlanConfig. Such manipulation of the argument lan leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

A security vulnerability has been detected in TOTOLINK A3300R 17.0.0cu.557_B20221024. This affects the function setDmzCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ip leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used.

A flaw has been found in TOTOLINK A3300R 17.0.0cu.557_B20221024. The affected element is the function setScheduleCfg of the file /cgi-bin/cstecgi.cgi of the component POST Parameter Handler. This manipulation of the argument recHour causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been published and may be used.

A vulnerability was found in Tenda A15 15.13.07.13. Affected is the function fromSetWirelessRepeat of the file /goform/openNetworkGateway. The manipulation of the argument wpapsk_crypto2_4g results in buffer overflow. The attack can be launched remotely. The exploit has been made public and could be used.

A weakness has been identified in Tenda O3 1.0.0.10(2478). This affects the function SetValue/GetValue of the file /goform/setNetworkService. This manipulation of the argument upnpEn causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks.

A weakness has been identified in Tenda CH22 1.0.0.1. Affected is the function fromwebExcptypemanFilter of the file /goform/webExcptypemanFilter. Executing a manipulation of the argument page can lead to buffer overflow. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks.

A security vulnerability has been detected in Tenda CH22 1.0.0.1. Affected by this vulnerability is the function fromP2pListFilter of the file /goform/P2pListFilter. The manipulation of the argument page leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used.

A vulnerability was identified in Tenda AC21 16.03.08.16. This vulnerability affects the function formSetPPTPServer of the file /goform/SetPptpServerCfg. The manipulation of the argument startIp leads to buffer overflow. Remote exploitation of the attack is possible. The exploit is publicly available and might be used.

A vulnerability was determined in Tenda CH22 1.0.0.1. This issue affects the function fromDhcpListClient of the file /goform/DhcpListClient. This manipulation of the argument page causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.

A vulnerability has been found in Tenda CH22 1.0.0.1. This affects the function fromSafeMacFilter of the file /goform/SafeMacFilter. The manipulation of the argument page leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Stack-based buffer overflow in the eap_do_notify function in eap.c in xsupplicant before 1.2.6, and possibly other versions, allows remote authenticated users to execute arbitrary code via unspecified vectors.

A vulnerability was determined in Tenda AC10 16.03.10.13. Affected by this vulnerability is the function formSysRunCmd of the file /goform/SysRunCmd. This manipulation of the argument getui causes buffer overflow. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized.

Stack-based buffer overflow in cgi-bin/cgi_main in NUUO NVRmini 2 1.7.6 through 3.0.0 and NETGEAR ReadyNAS Surveillance 1.1.2 allows remote authenticated users to execute arbitrary code via the sn parameter to the transfer_license command.