In the Linux kernel, the following vulnerability has been resolved: genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline The absence of IRQD_MOVE_PCNTXT prevents immediate effectiveness of interrupt affinity reconfiguration via procfs. Instead, the change is deferred until the next instance of the interrupt being triggered on the original CPU. When the interrupt next triggers on the original CPU, the new affinity is enforced within __irq_move_irq(). A vector is allocated from the new CPU, but the old vector on the original CPU remains and is not immediately reclaimed. Instead, apicd->move_in_progress is flagged, and the reclaiming process is delayed until the next trigger of the interrupt on the new CPU. Upon the subsequent triggering of the interrupt on the new CPU, irq_complete_move() adds a task to the old CPU's vector_cleanup list if it remains online. Subsequently, the timer on the old CPU iterates over its vector_cleanup list, reclaiming old vectors. However, a rare scenario arises if the old CPU is outgoing before the interrupt triggers again on the new CPU. In that case irq_force_complete_move() is not invoked on the outgoing CPU to reclaim the old apicd->prev_vector because the interrupt isn't currently affine to the outgoing CPU, and irq_needs_fixup() returns false. Even though __vector_schedule_cleanup() is later called on the new CPU, it doesn't reclaim apicd->prev_vector; instead, it simply resets both apicd->move_in_progress and apicd->prev_vector to 0. As a result, the vector remains unreclaimed in vector_matrix, leading to a CPU vector leak. To address this issue, move the invocation of irq_force_complete_move() before the irq_needs_fixup() call to reclaim apicd->prev_vector, if the interrupt is currently or used to be affine to the outgoing CPU. Additionally, reclaim the vector in __vector_schedule_cleanup() as well, following a warning message, although theoretically it should never see apicd->move_in_progress with apicd->prev_cpu pointing to an offline CPU.

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Disable auto-enable of exclusive INTx IRQ Currently for devices requiring masking at the irqchip for INTx, ie. devices without DisINTx support, the IRQ is enabled in request_irq() and subsequently disabled as necessary to align with the masked status flag. This presents a window where the interrupt could fire between these events, resulting in the IRQ incrementing the disable depth twice. This would be unrecoverable for a user since the masked flag prevents nested enables through vfio. Instead, invert the logic using IRQF_NO_AUTOEN such that exclusive INTx is never auto-enabled, then unmask as required.

In the Linux kernel, the following vulnerability has been resolved: power: supply: bq27xxx-i2c: Do not free non existing IRQ The bq27xxx i2c-client may not have an IRQ, in which case client->irq will be 0. bq27xxx_battery_i2c_probe() already has an if (client->irq) check wrapping the request_threaded_irq(). But bq27xxx_battery_i2c_remove() unconditionally calls free_irq(client->irq) leading to: [ 190.310742] ------------[ cut here ]------------ [ 190.310843] Trying to free already-free IRQ 0 [ 190.310861] WARNING: CPU: 2 PID: 1304 at kernel/irq/manage.c:1893 free_irq+0x1b8/0x310 Followed by a backtrace when unbinding the driver. Add an if (client->irq) to bq27xxx_battery_i2c_remove() mirroring probe() to fix this.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix potential "struct net" leak in inet6_rtm_getaddr() It seems that if userspace provides a correct IFA_TARGET_NETNSID value but no IFA_ADDRESS and IFA_LOCAL attributes, inet6_rtm_getaddr() returns -EINVAL with an elevated "struct net" refcount.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST If we received HCI_EV_IO_CAPA_REQUEST while HCI_OP_READ_REMOTE_EXT_FEATURES is yet to be responded assume the remote does support SSP since otherwise this event shouldn't be generated.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't set the MFP flag for the GTK The firmware doesn't need the MFP flag for the GTK, it can even make the firmware crash. in case the AP is configured with: group cipher TKIP and MFPC. We would send the GTK with cipher = TKIP and MFP which is of course not possible.

In the Linux kernel, the following vulnerability has been resolved: tpm: do not start chip while suspended Checking TPM_CHIP_FLAG_SUSPENDED after the call to tpm_find_get_ops() can lead to a spurious tpm_chip_start() call: [35985.503771] i2c i2c-1: Transfer while suspended [35985.503796] WARNING: CPU: 0 PID: 74 at drivers/i2c/i2c-core.h:56 __i2c_transfer+0xbe/0x810 [35985.503802] Modules linked in: [35985.503808] CPU: 0 UID: 0 PID: 74 Comm: hwrng Tainted: G W 6.13.0-next-20250203-00005-gfa0cb5642941 #19 9c3d7f78192f2d38e32010ac9c90fdc71109ef6f [35985.503814] Tainted: [W]=WARN [35985.503817] Hardware name: Google Morphius/Morphius, BIOS Google_Morphius.13434.858.0 10/26/2023 [35985.503819] RIP: 0010:__i2c_transfer+0xbe/0x810 [35985.503825] Code: 30 01 00 00 4c 89 f7 e8 40 fe d8 ff 48 8b 93 80 01 00 00 48 85 d2 75 03 49 8b 16 48 c7 c7 0a fb 7c a7 48 89 c6 e8 32 ad b0 fe <0f> 0b b8 94 ff ff ff e9 33 04 00 00 be 02 00 00 00 83 fd 02 0f 5 [35985.503828] RSP: 0018:ffffa106c0333d30 EFLAGS: 00010246 [35985.503833] RAX: 074ba64aa20f7000 RBX: ffff8aa4c1167120 RCX: 0000000000000000 [35985.503836] RDX: 0000000000000000 RSI: ffffffffa77ab0e4 RDI: 0000000000000001 [35985.503838] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 [35985.503841] R10: 0000000000000004 R11: 00000001000313d5 R12: ffff8aa4c10f1820 [35985.503843] R13: ffff8aa4c0e243c0 R14: ffff8aa4c1167250 R15: ffff8aa4c1167120 [35985.503846] FS: 0000000000000000(0000) GS:ffff8aa4eae00000(0000) knlGS:0000000000000000 [35985.503849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [35985.503852] CR2: 00007fab0aaf1000 CR3: 0000000105328000 CR4: 00000000003506f0 [35985.503855] Call Trace: [35985.503859] <TASK> [35985.503863] ? __warn+0xd4/0x260 [35985.503868] ? __i2c_transfer+0xbe/0x810 [35985.503874] ? report_bug+0xf3/0x210 [35985.503882] ? handle_bug+0x63/0xb0 [35985.503887] ? exc_invalid_op+0x16/0x50 [35985.503892] ? asm_exc_invalid_op+0x16/0x20 [35985.503904] ? __i2c_transfer+0xbe/0x810 [35985.503913] tpm_cr50_i2c_transfer_message+0x24/0xf0 [35985.503920] tpm_cr50_i2c_read+0x8e/0x120 [35985.503928] tpm_cr50_request_locality+0x75/0x170 [35985.503935] tpm_chip_start+0x116/0x160 [35985.503942] tpm_try_get_ops+0x57/0x90 [35985.503948] tpm_find_get_ops+0x26/0xd0 [35985.503955] tpm_get_random+0x2d/0x80 Don't move forward with tpm_chip_start() inside tpm_try_get_ops(), unless TPM_CHIP_FLAG_SUSPENDED is not set. tpm_find_get_ops() will return NULL in such a failure case.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: once more fix the call oder in amdgpu_ttm_move() v2 This reverts drm/amdgpu: fix ftrace event amdgpu_bo_move always move on same heap. The basic problem here is that after the move the old location is simply not available any more. Some fixes were suggested, but essentially we should call the move notification before actually moving things because only this way we have the correct order for DMA-buf and VM move notifications as well. Also rework the statistic handling so that we don't update the eviction counter before the move. v2: add missing NULL check

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Stop parsing channels bits when all channels are found. If a usb audio device sets more bits than the amount of channels it could write outside of the map array.

In the Linux kernel, the following vulnerability has been resolved: cpumap: Zero-initialise xdp_rxq_info struct before running XDP program When running an XDP program that is attached to a cpumap entry, we don't initialise the xdp_rxq_info data structure being used in the xdp_buff that backs the XDP program invocation. Tobias noticed that this leads to random values being returned as the xdp_md->rx_queue_index value for XDP programs running in a cpumap. This means we're basically returning the contents of the uninitialised memory, which is bad. Fix this by zero-initialising the rxq data structure before running the XDP program.

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject iftype change with mesh ID change It's currently possible to change the mesh ID when the interface isn't yet in mesh mode, at the same time as changing it into mesh mode. This leads to an overwrite of data in the wdev->u union for the interface type it currently has, causing cfg80211_change_iface() to do wrong things when switching. We could probably allow setting an interface to mesh while setting the mesh ID at the same time by doing a different order of operations here, but realistically there's no userspace that's going to do this, so just disallow changes in iftype when setting mesh ID.

In the Linux kernel, the following vulnerability has been resolved: nvme: fix reconnection fail due to reserved tag allocation We found a issue on production environment while using NVMe over RDMA, admin_q reconnect failed forever while remote target and network is ok. After dig into it, we found it may caused by a ABBA deadlock due to tag allocation. In my case, the tag was hold by a keep alive request waiting inside admin_q, as we quiesced admin_q while reset ctrl, so the request maked as idle and will not process before reset success. As fabric_q shares tagset with admin_q, while reconnect remote target, we need a tag for connect command, but the only one reserved tag was held by keep alive command which waiting inside admin_q. As a result, we failed to reconnect admin_q forever. In order to fix this issue, I think we should keep two reserved tags for admin queue.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_flow_offload: reset dst in route object after setting up flow dst is transferred to the flow object, route object does not own it anymore. Reset dst in route object, otherwise if flow_offload_add() fails, error path releases dst twice, leading to a refcount underflow.

In the Linux kernel, the following vulnerability has been resolved: rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back In the commit d73ef2d69c0d ("rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length"), an adjustment was made to the old loop logic in the function `rtnl_bridge_setlink` to enable the loop to also check the length of the IFLA_BRIDGE_MODE attribute. However, this adjustment removed the `break` statement and led to an error logic of the flags writing back at the end of this function. if (have_flags) memcpy(nla_data(attr), &flags, sizeof(flags)); // attr should point to IFLA_BRIDGE_FLAGS NLA !!! Before the mentioned commit, the `attr` is granted to be IFLA_BRIDGE_FLAGS. However, this is not necessarily true fow now as the updated loop will let the attr point to the last NLA, even an invalid NLA which could cause overflow writes. This patch introduces a new variable `br_flag` to save the NLA pointer that points to IFLA_BRIDGE_FLAGS and uses it to resolve the mentioned error logic.

In the Linux kernel, the following vulnerability has been resolved: net: ibmveth: make veth_pool_store stop hanging v2: - Created a single error handling unlock and exit in veth_pool_store - Greatly expanded commit message with previous explanatory-only text Summary: Use rtnl_mutex to synchronize veth_pool_store with itself, ibmveth_close and ibmveth_open, preventing multiple calls in a row to napi_disable. Background: Two (or more) threads could call veth_pool_store through writing to /sys/devices/vio/30000002/pool*/*. You can do this easily with a little shell script. This causes a hang. I configured LOCKDEP, compiled ibmveth.c with DEBUG, and built a new kernel. I ran this test again and saw: Setting pool0/active to 0 Setting pool1/active to 1 [ 73.911067][ T4365] ibmveth 30000002 eth0: close starting Setting pool1/active to 1 Setting pool1/active to 0 [ 73.911367][ T4366] ibmveth 30000002 eth0: close starting [ 73.916056][ T4365] ibmveth 30000002 eth0: close complete [ 73.916064][ T4365] ibmveth 30000002 eth0: open starting [ 110.808564][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 230.808495][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 243.683786][ T123] INFO: task stress.sh:4365 blocked for more than 122 seconds. [ 243.683827][ T123] Not tainted 6.14.0-01103-g2df0c02dab82-dirty #8 [ 243.683833][ T123] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 243.683838][ T123] task:stress.sh state:D stack:28096 pid:4365 tgid:4365 ppid:4364 task_flags:0x400040 flags:0x00042000 [ 243.683852][ T123] Call Trace: [ 243.683857][ T123] [c00000000c38f690] [0000000000000001] 0x1 (unreliable) [ 243.683868][ T123] [c00000000c38f840] [c00000000001f908] __switch_to+0x318/0x4e0 [ 243.683878][ T123] [c00000000c38f8a0] [c000000001549a70] __schedule+0x500/0x12a0 [ 243.683888][ T123] [c00000000c38f9a0] [c00000000154a878] schedule+0x68/0x210 [ 243.683896][ T123] [c00000000c38f9d0] [c00000000154ac80] schedule_preempt_disabled+0x30/0x50 [ 243.683904][ T123] [c00000000c38fa00] [c00000000154dbb0] __mutex_lock+0x730/0x10f0 [ 243.683913][ T123] [c00000000c38fb10] [c000000001154d40] napi_enable+0x30/0x60 [ 243.683921][ T123] [c00000000c38fb40] [c000000000f4ae94] ibmveth_open+0x68/0x5dc [ 243.683928][ T123] [c00000000c38fbe0] [c000000000f4aa20] veth_pool_store+0x220/0x270 [ 243.683936][ T123] [c00000000c38fc70] [c000000000826278] sysfs_kf_write+0x68/0xb0 [ 243.683944][ T123] [c00000000c38fcb0] [c0000000008240b8] kernfs_fop_write_iter+0x198/0x2d0 [ 243.683951][ T123] [c00000000c38fd00] [c00000000071b9ac] vfs_write+0x34c/0x650 [ 243.683958][ T123] [c00000000c38fdc0] [c00000000071bea8] ksys_write+0x88/0x150 [ 243.683966][ T123] [c00000000c38fe10] [c0000000000317f4] system_call_exception+0x124/0x340 [ 243.683973][ T123] [c00000000c38fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec ... [ 243.684087][ T123] Showing all locks held in the system: [ 243.684095][ T123] 1 lock held by khungtaskd/123: [ 243.684099][ T123] #0: c00000000278e370 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x50/0x248 [ 243.684114][ T123] 4 locks held by stress.sh/4365: [ 243.684119][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243.684132][ T123] #1: c000000041aea888 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0 [ 243.684143][ T123] #2: c0000000366fb9a8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0 [ 243.684155][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_enable+0x30/0x60 [ 243.684166][ T123] 5 locks held by stress.sh/4366: [ 243.684170][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: remove kernfs active break A warning was found: WARNING: CPU: 10 PID: 3486953 at fs/kernfs/file.c:828 CPU: 10 PID: 3486953 Comm: rmdir Kdump: loaded Tainted: G RIP: 0010:kernfs_should_drain_open_files+0x1a1/0x1b0 RSP: 0018:ffff8881107ef9e0 EFLAGS: 00010202 RAX: 0000000080000002 RBX: ffff888154738c00 RCX: dffffc0000000000 RDX: 0000000000000007 RSI: 0000000000000004 RDI: ffff888154738c04 RBP: ffff888154738c04 R08: ffffffffaf27fa15 R09: ffffed102a8e7180 R10: ffff888154738c07 R11: 0000000000000000 R12: ffff888154738c08 R13: ffff888750f8c000 R14: ffff888750f8c0e8 R15: ffff888154738ca0 FS: 00007f84cd0be740(0000) GS:ffff8887ddc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555f9fbe00c8 CR3: 0000000153eec001 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: kernfs_drain+0x15e/0x2f0 __kernfs_remove+0x165/0x300 kernfs_remove_by_name_ns+0x7b/0xc0 cgroup_rm_file+0x154/0x1c0 cgroup_addrm_files+0x1c2/0x1f0 css_clear_dir+0x77/0x110 kill_css+0x4c/0x1b0 cgroup_destroy_locked+0x194/0x380 cgroup_rmdir+0x2a/0x140 It can be explained by: rmdir echo 1 > cpuset.cpus kernfs_fop_write_iter // active=0 cgroup_rm_file kernfs_remove_by_name_ns kernfs_get_active // active=1 __kernfs_remove // active=0x80000002 kernfs_drain cpuset_write_resmask wait_event //waiting (active == 0x80000001) kernfs_break_active_protection // active = 0x80000001 // continue kernfs_unbreak_active_protection // active = 0x80000002 ... kernfs_should_drain_open_files // warning occurs kernfs_put_active This warning is caused by 'kernfs_break_active_protection' when it is writing to cpuset.cpus, and the cgroup is removed concurrently. The commit 3a5a6d0c2b03 ("cpuset: don't nest cgroup_mutex inside get_online_cpus()") made cpuset_hotplug_workfn asynchronous, This change involves calling flush_work(), which can create a multiple processes circular locking dependency that involve cgroup_mutex, potentially leading to a deadlock. To avoid deadlock. the commit 76bb5ab8f6e3 ("cpuset: break kernfs active protection in cpuset_write_resmask()") added 'kernfs_break_active_protection' in the cpuset_write_resmask. This could lead to this warning. After the commit 2125c0034c5d ("cgroup/cpuset: Make cpuset hotplug processing synchronous"), the cpuset_write_resmask no longer needs to wait the hotplug to finish, which means that concurrent hotplug and cpuset operations are no longer possible. Therefore, the deadlock doesn't exist anymore and it does not have to 'break active protection' now. To fix this warning, just remove kernfs_break_active_protection operation in the 'cpuset_write_resmask'.

In the Linux kernel, the following vulnerability has been resolved: media: vimc: skip .s_stream() for stopped entities Syzbot reported [1] a warning prompted by a check in call_s_stream() that checks whether .s_stream() operation is warranted for unstarted or stopped subdevs. Add a simple fix in vimc_streamer_pipeline_terminate() ensuring that entities skip a call to .s_stream() unless they have been previously properly started. [1] Syzbot report: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 5933 at drivers/media/v4l2-core/v4l2-subdev.c:460 call_s_stream+0x2df/0x350 drivers/media/v4l2-core/v4l2-subdev.c:460 Modules linked in: CPU: 0 UID: 0 PID: 5933 Comm: syz-executor330 Not tainted 6.13.0-rc2-syzkaller-00362-g2d8308bf5b67 #0 ... Call Trace: <TASK> vimc_streamer_pipeline_terminate+0x218/0x320 drivers/media/test-drivers/vimc/vimc-streamer.c:62 vimc_streamer_pipeline_init drivers/media/test-drivers/vimc/vimc-streamer.c:101 [inline] vimc_streamer_s_stream+0x650/0x9a0 drivers/media/test-drivers/vimc/vimc-streamer.c:203 vimc_capture_start_streaming+0xa1/0x130 drivers/media/test-drivers/vimc/vimc-capture.c:256 vb2_start_streaming+0x15f/0x5a0 drivers/media/common/videobuf2/videobuf2-core.c:1789 vb2_core_streamon+0x2a7/0x450 drivers/media/common/videobuf2/videobuf2-core.c:2348 vb2_streamon drivers/media/common/videobuf2/videobuf2-v4l2.c:875 [inline] vb2_ioctl_streamon+0xf4/0x170 drivers/media/common/videobuf2/videobuf2-v4l2.c:1118 __video_do_ioctl+0xaf0/0xf00 drivers/media/v4l2-core/v4l2-ioctl.c:3122 video_usercopy+0x4d2/0x1620 drivers/media/v4l2-core/v4l2-ioctl.c:3463 v4l2_ioctl+0x1ba/0x250 drivers/media/v4l2-core/v4l2-dev.c:366 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2b85c01b19 ...

In the Linux kernel, the following vulnerability has been resolved: llc: do not use skb_get() before dev_queue_xmit() syzbot is able to crash hosts [1], using llc and devices not supporting IFF_TX_SKB_SHARING. In this case, e1000 driver calls eth_skb_pad(), while the skb is shared. Simply replace skb_get() by skb_clone() in net/llc/llc_s_ac.c Note that e1000 driver might have an issue with pktgen, because it does not clear IFF_TX_SKB_SHARING, this is an orthogonal change. We need to audit other skb_get() uses in net/llc. [1] kernel BUG at net/core/skbuff.c:2178 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 16371 Comm: syz.2.2764 Not tainted 6.14.0-rc4-syzkaller-00052-gac9c34d1e45a #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:pskb_expand_head+0x6ce/0x1240 net/core/skbuff.c:2178 Call Trace: <TASK> __skb_pad+0x18a/0x610 net/core/skbuff.c:2466 __skb_put_padto include/linux/skbuff.h:3843 [inline] skb_put_padto include/linux/skbuff.h:3862 [inline] eth_skb_pad include/linux/etherdevice.h:656 [inline] e1000_xmit_frame+0x2d99/0x5800 drivers/net/ethernet/intel/e1000/e1000_main.c:3128 __netdev_start_xmit include/linux/netdevice.h:5151 [inline] netdev_start_xmit include/linux/netdevice.h:5160 [inline] xmit_one net/core/dev.c:3806 [inline] dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3822 sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343 __dev_xmit_skb net/core/dev.c:4045 [inline] __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4621 dev_queue_xmit include/linux/netdevice.h:3313 [inline] llc_sap_action_send_test_c+0x268/0x320 net/llc/llc_s_ac.c:144 llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline] llc_sap_next_state net/llc/llc_sap.c:182 [inline] llc_sap_state_process+0x239/0x510 net/llc/llc_sap.c:209 llc_ui_sendmsg+0xd0d/0x14e0 net/llc/af_llc.c:993 sock_sendmsg_nosec net/socket.c:718 [inline]

In the Linux kernel, the following vulnerability has been resolved: pfcp: Destroy device along with udp socket's netns dismantle. pfcp_newlink() links the device to a list in dev_net(dev) instead of net, where a udp tunnel socket is created. Even when net is removed, the device stays alive on dev_net(dev). Then, removing net triggers the splat below. [0] In this example, pfcp0 is created in ns2, but the udp socket is created in ns1. ip netns add ns1 ip netns add ns2 ip -n ns1 link add netns ns2 name pfcp0 type pfcp ip netns del ns1 Let's link the device to the socket's netns instead. Now, pfcp_net_exit() needs another netdev iteration to remove all pfcp devices in the netns. pfcp_dev_list is not used under RCU, so the list API is converted to the non-RCU variant. pfcp_net_exit() can be converted to .exit_batch_rtnl() in net-next. [0]: ref_tracker: net notrefcnt@00000000128b34dc has 1/1 users at sk_alloc (./include/net/net_namespace.h:345 net/core/sock.c:2236) inet_create (net/ipv4/af_inet.c:326 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1558) udp_sock_create4 (net/ipv4/udp_tunnel_core.c:18) pfcp_create_sock (drivers/net/pfcp.c:168) pfcp_newlink (drivers/net/pfcp.c:182 drivers/net/pfcp.c:197) rtnl_newlink (net/core/rtnetlink.c:3786 net/core/rtnetlink.c:3897 net/core/rtnetlink.c:4012) rtnetlink_rcv_msg (net/core/rtnetlink.c:6922) netlink_rcv_skb (net/netlink/af_netlink.c:2542) netlink_unicast (net/netlink/af_netlink.c:1321 net/netlink/af_netlink.c:1347) netlink_sendmsg (net/netlink/af_netlink.c:1891) ____sys_sendmsg (net/socket.c:711 net/socket.c:726 net/socket.c:2583) ___sys_sendmsg (net/socket.c:2639) __sys_sendmsg (net/socket.c:2669) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) WARNING: CPU: 1 PID: 11 at lib/ref_tracker.c:179 ref_tracker_dir_exit (lib/ref_tracker.c:179) Modules linked in: CPU: 1 UID: 0 PID: 11 Comm: kworker/u16:0 Not tainted 6.13.0-rc5-00147-g4c1224501e9d #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:ref_tracker_dir_exit (lib/ref_tracker.c:179) Code: 00 00 00 fc ff df 4d 8b 26 49 bd 00 01 00 00 00 00 ad de 4c 39 f5 0f 85 df 00 00 00 48 8b 74 24 08 48 89 df e8 a5 cc 12 02 90 <0f> 0b 90 48 8d 6b 44 be 04 00 00 00 48 89 ef e8 80 de 67 ff 48 89 RSP: 0018:ff11000007f3fb60 EFLAGS: 00010286 RAX: 00000000000020ef RBX: ff1100000d6481e0 RCX: 1ffffffff0e40d82 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8423ee3c RBP: ff1100000d648230 R08: 0000000000000001 R09: fffffbfff0e395af R10: 0000000000000001 R11: 0000000000000000 R12: ff1100000d648230 R13: dead000000000100 R14: ff1100000d648230 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ff1100006ce80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005620e1363990 CR3: 000000000eeb2002 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn (kernel/panic.c:748) ? ref_tracker_dir_exit (lib/ref_tracker.c:179) ? report_bug (lib/bug.c:201 lib/bug.c:219) ? handle_bug (arch/x86/kernel/traps.c:285) ? exc_invalid_op (arch/x86/kernel/traps.c:309 (discriminator 1)) ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) ? _raw_spin_unlock_irqrestore (./arch/x86/include/asm/irqflags.h:42 ./arch/x86/include/asm/irqflags.h:97 ./arch/x86/include/asm/irqflags.h:155 ./include/linux/spinlock_api_smp.h:151 kernel/locking/spinlock.c:194) ? ref_tracker_dir_exit (lib/ref_tracker.c:179) ? __pfx_ref_tracker_dir_exit (lib/ref_tracker.c:158) ? kfree (mm/slub.c:4613 mm/slub.c:4761) net_free (net/core/net_namespace.c:476 net/core/net_namespace.c:467) cleanup_net (net/cor ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bonding: check xdp prog when set bond mode Following operations can trigger a warning[1]: ip netns add ns1 ip netns exec ns1 ip link add bond0 type bond mode balance-rr ip netns exec ns1 ip link set dev bond0 xdp obj af_xdp_kern.o sec xdp ip netns exec ns1 ip link set bond0 type bond mode broadcast ip netns del ns1 When delete the namespace, dev_xdp_uninstall() is called to remove xdp program on bond dev, and bond_xdp_set() will check the bond mode. If bond mode is changed after attaching xdp program, the warning may occur. Some bond modes (broadcast, etc.) do not support native xdp. Set bond mode with xdp program attached is not good. Add check for xdp program when set bond mode. [1] ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:9912 unregister_netdevice_many_notify+0x8d9/0x930 Modules linked in: CPU: 0 UID: 0 PID: 11 Comm: kworker/u4:0 Not tainted 6.14.0-rc4 #107 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:unregister_netdevice_many_notify+0x8d9/0x930 Code: 00 00 48 c7 c6 6f e3 a2 82 48 c7 c7 d0 b3 96 82 e8 9c 10 3e ... RSP: 0018:ffffc90000063d80 EFLAGS: 00000282 RAX: 00000000ffffffa1 RBX: ffff888004959000 RCX: 00000000ffffdfff RDX: 0000000000000000 RSI: 00000000ffffffea RDI: ffffc90000063b48 RBP: ffffc90000063e28 R08: ffffffff82d39b28 R09: 0000000000009ffb R10: 0000000000000175 R11: ffffffff82d09b40 R12: ffff8880049598e8 R13: 0000000000000001 R14: dead000000000100 R15: ffffc90000045000 FS: 0000000000000000(0000) GS:ffff888007a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000d406b60 CR3: 000000000483e000 CR4: 00000000000006f0 Call Trace: <TASK> ? __warn+0x83/0x130 ? unregister_netdevice_many_notify+0x8d9/0x930 ? report_bug+0x18e/0x1a0 ? handle_bug+0x54/0x90 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? unregister_netdevice_many_notify+0x8d9/0x930 ? bond_net_exit_batch_rtnl+0x5c/0x90 cleanup_net+0x237/0x3d0 process_one_work+0x163/0x390 worker_thread+0x293/0x3b0 ? __pfx_worker_thread+0x10/0x10 kthread+0xec/0x1e0 ? __pfx_kthread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double free of TCP_Server_Info::hostname When shutting down the server in cifs_put_tcp_session(), cifsd thread might be reconnecting to multiple DFS targets before it realizes it should exit the loop, so @server->hostname can't be freed as long as cifsd thread isn't done. Otherwise the following can happen: RIP: 0010:__slab_free+0x223/0x3c0 Code: 5e 41 5f c3 cc cc cc cc 4c 89 de 4c 89 cf 44 89 44 24 08 4c 89 1c 24 e8 fb cf 8e 00 44 8b 44 24 08 4c 8b 1c 24 e9 5f fe ff ff <0f> 0b 41 f7 45 08 00 0d 21 00 0f 85 2d ff ff ff e9 1f ff ff ff 80 RSP: 0018:ffffb26180dbfd08 EFLAGS: 00010246 RAX: ffff8ea34728e510 RBX: ffff8ea34728e500 RCX: 0000000000800068 RDX: 0000000000800068 RSI: 0000000000000000 RDI: ffff8ea340042400 RBP: ffffe112041ca380 R08: 0000000000000001 R09: 0000000000000000 R10: 6170732e31303000 R11: 70726f632e786563 R12: ffff8ea34728e500 R13: ffff8ea340042400 R14: ffff8ea34728e500 R15: 0000000000800068 FS: 0000000000000000(0000) GS:ffff8ea66fd80000(0000) 000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffc25376080 CR3: 000000012a2ba001 CR4: PKRU: 55555554 Call Trace: <TASK> ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? __reconnect_target_unlocked+0x3e/0x160 [cifs] ? __die_body.cold+0x8/0xd ? die+0x2b/0x50 ? do_trap+0xce/0x120 ? __slab_free+0x223/0x3c0 ? do_error_trap+0x65/0x80 ? __slab_free+0x223/0x3c0 ? exc_invalid_op+0x4e/0x70 ? __slab_free+0x223/0x3c0 ? asm_exc_invalid_op+0x16/0x20 ? __slab_free+0x223/0x3c0 ? extract_hostname+0x5c/0xa0 [cifs] ? extract_hostname+0x5c/0xa0 [cifs] ? __kmalloc+0x4b/0x140 __reconnect_target_unlocked+0x3e/0x160 [cifs] reconnect_dfs_server+0x145/0x430 [cifs] cifs_handle_standard+0x1ad/0x1d0 [cifs] cifs_demultiplex_thread+0x592/0x730 [cifs] ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] kthread+0xdd/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK>

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix possible crash when setting up bsg fails If bsg_setup_queue() fails, the bsg_queue is assigned a non-NULL value. Consequently, in mpi3mr_bsg_exit(), the condition "if(!mrioc->bsg_queue)" will not be satisfied, preventing execution from entering bsg_remove_queue(), which could lead to the following crash: BUG: kernel NULL pointer dereference, address: 000000000000041c Call Trace: <TASK> mpi3mr_bsg_exit+0x1f/0x50 [mpi3mr] mpi3mr_remove+0x6f/0x340 [mpi3mr] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19d/0x220 unbind_store+0xa4/0xb0 kernfs_fop_write_iter+0x11f/0x200 vfs_write+0x1fc/0x3e0 ksys_write+0x67/0xe0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x78/0xe2

In the Linux kernel, the following vulnerability has been resolved: drm/ast: astdp: Fix timeout for enabling video signal The ASTDP transmitter sometimes takes up to 1 second for enabling the video signal, while the timeout is only 200 msec. This results in a kernel error message. Increase the timeout to 1 second. An example of the error message is shown below. [ 697.084433] ------------[ cut here ]------------ [ 697.091115] ast 0000:02:00.0: [drm] drm_WARN_ON(!__ast_dp_wait_enable(ast, enabled)) [ 697.091233] WARNING: CPU: 1 PID: 160 at drivers/gpu/drm/ast/ast_dp.c:232 ast_dp_set_enable+0x123/0x140 [ast] [...] [ 697.272469] RIP: 0010:ast_dp_set_enable+0x123/0x140 [ast] [...] [ 697.415283] Call Trace: [ 697.420727] <TASK> [ 697.425908] ? show_trace_log_lvl+0x196/0x2c0 [ 697.433304] ? show_trace_log_lvl+0x196/0x2c0 [ 697.440693] ? drm_atomic_helper_commit_modeset_enables+0x30a/0x470 [ 697.450115] ? ast_dp_set_enable+0x123/0x140 [ast] [ 697.458059] ? __warn.cold+0xaf/0xca [ 697.464713] ? ast_dp_set_enable+0x123/0x140 [ast] [ 697.472633] ? report_bug+0x134/0x1d0 [ 697.479544] ? handle_bug+0x58/0x90 [ 697.486127] ? exc_invalid_op+0x13/0x40 [ 697.492975] ? asm_exc_invalid_op+0x16/0x20 [ 697.500224] ? preempt_count_sub+0x14/0xc0 [ 697.507473] ? ast_dp_set_enable+0x123/0x140 [ast] [ 697.515377] ? ast_dp_set_enable+0x123/0x140 [ast] [ 697.523227] drm_atomic_helper_commit_modeset_enables+0x30a/0x470 [ 697.532388] drm_atomic_helper_commit_tail+0x58/0x90 [ 697.540400] ast_mode_config_helper_atomic_commit_tail+0x30/0x40 [ast] [ 697.550009] commit_tail+0xfe/0x1d0 [ 697.556547] drm_atomic_helper_commit+0x198/0x1c0 This is a cosmetical problem. Enabling the video signal still works even with the error message. The problem has always been present, but only recent versions of the ast driver warn about missing the timeout.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_h323: Add protection for bmp length out of range UBSAN load reports an exception of BRK#5515 SHIFT_ISSUE:Bitwise shifts that are out of bounds for their data type. vmlinux get_bitmap(b=75) + 712 <net/netfilter/nf_conntrack_h323_asn1.c:0> vmlinux decode_seq(bs=0xFFFFFFD008037000, f=0xFFFFFFD008037018, level=134443100) + 1956 <net/netfilter/nf_conntrack_h323_asn1.c:592> vmlinux decode_choice(base=0xFFFFFFD0080370F0, level=23843636) + 1216 <net/netfilter/nf_conntrack_h323_asn1.c:814> vmlinux decode_seq(f=0xFFFFFFD0080371A8, level=134443500) + 812 <net/netfilter/nf_conntrack_h323_asn1.c:576> vmlinux decode_choice(base=0xFFFFFFD008037280, level=0) + 1216 <net/netfilter/nf_conntrack_h323_asn1.c:814> vmlinux DecodeRasMessage() + 304 <net/netfilter/nf_conntrack_h323_asn1.c:833> vmlinux ras_help() + 684 <net/netfilter/nf_conntrack_h323_main.c:1728> vmlinux nf_confirm() + 188 <net/netfilter/nf_conntrack_proto.c:137> Due to abnormal data in skb->data, the extension bitmap length exceeds 32 when decoding ras message then uses the length to make a shift operation. It will change into negative after several loop. UBSAN load could detect a negative shift as an undefined behaviour and reports exception. So we add the protection to avoid the length exceeding 32. Or else it will return out of range error and stop decoding.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix RELEASE_LOCKOWNER The test on so_count in nfsd4_release_lockowner() is nonsense and harmful. Revert to using check_for_locks(), changing that to not sleep. First: harmful. As is documented in the kdoc comment for nfsd4_release_lockowner(), the test on so_count can transiently return a false positive resulting in a return of NFS4ERR_LOCKS_HELD when in fact no locks are held. This is clearly a protocol violation and with the Linux NFS client it can cause incorrect behaviour. If RELEASE_LOCKOWNER is sent while some other thread is still processing a LOCK request which failed because, at the time that request was received, the given owner held a conflicting lock, then the nfsd thread processing that LOCK request can hold a reference (conflock) to the lock owner that causes nfsd4_release_lockowner() to return an incorrect error. The Linux NFS client ignores that NFS4ERR_LOCKS_HELD error because it never sends NFS4_RELEASE_LOCKOWNER without first releasing any locks, so it knows that the error is impossible. It assumes the lock owner was in fact released so it feels free to use the same lock owner identifier in some later locking request. When it does reuse a lock owner identifier for which a previous RELEASE failed, it will naturally use a lock_seqid of zero. However the server, which didn't release the lock owner, will expect a larger lock_seqid and so will respond with NFS4ERR_BAD_SEQID. So clearly it is harmful to allow a false positive, which testing so_count allows. The test is nonsense because ... well... it doesn't mean anything. so_count is the sum of three different counts. 1/ the set of states listed on so_stateids 2/ the set of active vfs locks owned by any of those states 3/ various transient counts such as for conflicting locks. When it is tested against '2' it is clear that one of these is the transient reference obtained by find_lockowner_str_locked(). It is not clear what the other one is expected to be. In practice, the count is often 2 because there is precisely one state on so_stateids. If there were more, this would fail. In my testing I see two circumstances when RELEASE_LOCKOWNER is called. In one case, CLOSE is called before RELEASE_LOCKOWNER. That results in all the lock states being removed, and so the lockowner being discarded (it is removed when there are no more references which usually happens when the lock state is discarded). When nfsd4_release_lockowner() finds that the lock owner doesn't exist, it returns success. The other case shows an so_count of '2' and precisely one state listed in so_stateid. It appears that the Linux client uses a separate lock owner for each file resulting in one lock state per lock owner, so this test on '2' is safe. For another client it might not be safe. So this patch changes check_for_locks() to use the (newish) find_any_file_locked() so that it doesn't take a reference on the nfs4_file and so never calls nfsd_file_put(), and so never sleeps. With this check is it safe to restore the use of check_for_locks() rather than testing so_count against the mysterious '2'.

In the Linux kernel, the following vulnerability has been resolved: PCI/ASPM: Fix deadlock when enabling ASPM A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice.

In the Linux kernel, the following vulnerability has been resolved: clk: Get runtime PM before walking tree for clk_summary Similar to the previous commit, we should make sure that all devices are runtime resumed before printing the clk_summary through debugfs. Failure to do so would result in a deadlock if the thread is resuming a device to print clk state and that device is also runtime resuming in another thread, e.g the screen is turning on and the display driver is starting up. We remove the calls to clk_pm_runtime_{get,put}() in this path because they're superfluous now that we know the devices are runtime resumed. This also squashes a bug where the return value of clk_pm_runtime_get() wasn't checked, leading to an RPM count underflow on error paths.

In the Linux kernel, the following vulnerability has been resolved: kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address Read from an unsafe address with copy_from_kernel_nofault() in arch_adjust_kprobe_addr() because this function is used before checking the address is in text or not. Syzcaller bot found a bug and reported the case if user specifies inaccessible data area, arch_adjust_kprobe_addr() will cause a kernel panic. [ mingo: Clarified the comment. ]

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix null-pointer dereference on edid reading Use i2c adapter when there isn't aux_mode in dc_link to fix a null-pointer derefence that happens when running igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector detected as below: [ +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0 [ +0.000010] #PF: supervisor read access in kernel mode [ +0.000005] #PF: error_code(0x0000) - not-present page [ +0.000004] PGD 0 P4D 0 [ +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152 [ +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021 [ +0.000004] RIP: 0010:i2c_transfer+0xd/0x100 [ +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16 [ +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246 [ +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080 [ +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0 [ +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980 [ +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080 [ +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f [ +0.000004] FS: 00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0 [ +0.000003] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000006] <TASK> [ +0.000006] ? __die+0x23/0x70 [ +0.000011] ? page_fault_oops+0x17d/0x4c0 [ +0.000008] ? preempt_count_add+0x6e/0xa0 [ +0.000008] ? srso_alias_return_thunk+0x5/0x7f [ +0.000011] ? exc_page_fault+0x7f/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? i2c_transfer+0xd/0x100 [ +0.000010] drm_do_probe_ddc_edid+0xc2/0x140 [drm] [ +0.000067] ? srso_alias_return_thunk+0x5/0x7f [ +0.000006] ? _drm_do_get_edid+0x97/0x3c0 [drm] [ +0.000043] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000042] edid_block_read+0x3b/0xd0 [drm] [ +0.000043] _drm_do_get_edid+0xb6/0x3c0 [drm] [ +0.000041] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000043] drm_edid_read_custom+0x37/0xd0 [drm] [ +0.000044] amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu] [ +0.000153] drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper] [ +0.000000] __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper] [ +0.000000] ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu] [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper] [ +0.000000] status_store+0xb2/0x1f0 [drm] [ +0.000000] kernfs_fop_write_iter+0x136/0x1d0 [ +0.000000] vfs_write+0x24d/0x440 [ +0.000000] ksys_write+0x6f/0xf0 [ +0.000000] do_syscall_64+0x60/0xc0 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? syscall_exit_to_user_mode+0x2b/0x40 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ +0.000000] RIP: 0033:0x7f9ad46b4b00 [ +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89 [ +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00 [ +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009 [ +0.000000] RBP: 0000000000000002 R08 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: ensure offloading TID queue exists The resume code path assumes that the TX queue for the offloading TID has been configured. At resume time it then tries to sync the write pointer as it may have been updated by the firmware. In the unusual event that no packets have been send on TID 0, the queue will not have been allocated and this causes a crash. Fix this by ensuring the queue exist at suspend time.

In the Linux kernel, the following vulnerability has been resolved: ppp_async: limit MRU to 64K syzbot triggered a warning [1] in __alloc_pages(): WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp) Willem fixed a similar issue in commit c0a2a1b0d631 ("ppp: limit MRU to 64K") Adopt the same sanity check for ppp_async_ioctl(PPPIOCSMRU) [1]: WARNING: CPU: 1 PID: 11 at mm/page_alloc.c:4543 __alloc_pages+0x308/0x698 mm/page_alloc.c:4543 Modules linked in: CPU: 1 PID: 11 Comm: kworker/u4:0 Not tainted 6.8.0-rc2-syzkaller-g41bccc98fb79 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Workqueue: events_unbound flush_to_ldisc pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __alloc_pages+0x308/0x698 mm/page_alloc.c:4543 lr : __alloc_pages+0xc8/0x698 mm/page_alloc.c:4537 sp : ffff800093967580 x29: ffff800093967660 x28: ffff8000939675a0 x27: dfff800000000000 x26: ffff70001272ceb4 x25: 0000000000000000 x24: ffff8000939675c0 x23: 0000000000000000 x22: 0000000000060820 x21: 1ffff0001272ceb8 x20: ffff8000939675e0 x19: 0000000000000010 x18: ffff800093967120 x17: ffff800083bded5c x16: ffff80008ac97500 x15: 0000000000000005 x14: 1ffff0001272cebc x13: 0000000000000000 x12: 0000000000000000 x11: ffff70001272cec1 x10: 1ffff0001272cec0 x9 : 0000000000000001 x8 : ffff800091c91000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 00000000ffffffff x4 : 0000000000000000 x3 : 0000000000000020 x2 : 0000000000000008 x1 : 0000000000000000 x0 : ffff8000939675e0 Call trace: __alloc_pages+0x308/0x698 mm/page_alloc.c:4543 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] __kmalloc_large_node+0xbc/0x1fc mm/slub.c:3926 __do_kmalloc_node mm/slub.c:3969 [inline] __kmalloc_node_track_caller+0x418/0x620 mm/slub.c:4001 kmalloc_reserve+0x17c/0x23c net/core/skbuff.c:590 __alloc_skb+0x1c8/0x3d8 net/core/skbuff.c:651 __netdev_alloc_skb+0xb8/0x3e8 net/core/skbuff.c:715 netdev_alloc_skb include/linux/skbuff.h:3235 [inline] dev_alloc_skb include/linux/skbuff.h:3248 [inline] ppp_async_input drivers/net/ppp/ppp_async.c:863 [inline] ppp_asynctty_receive+0x588/0x186c drivers/net/ppp/ppp_async.c:341 tty_ldisc_receive_buf+0x12c/0x15c drivers/tty/tty_buffer.c:390 tty_port_default_receive_buf+0x74/0xac drivers/tty/tty_port.c:37 receive_buf drivers/tty/tty_buffer.c:444 [inline] flush_to_ldisc+0x284/0x6e4 drivers/tty/tty_buffer.c:494 process_one_work+0x694/0x1204 kernel/workqueue.c:2633 process_scheduled_works kernel/workqueue.c:2706 [inline] worker_thread+0x938/0xef4 kernel/workqueue.c:2787 kthread+0x288/0x310 kernel/kthread.c:388 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860

In the Linux kernel, the following vulnerability has been resolved: dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape For raid456, if reshape is still in progress, then IO across reshape position will wait for reshape to make progress. However, for dm-raid, in following cases reshape will never make progress hence IO will hang: 1) the array is read-only; 2) MD_RECOVERY_WAIT is set; 3) MD_RECOVERY_FROZEN is set; After commit c467e97f079f ("md/raid6: use valid sector values to determine if an I/O should wait on the reshape") fix the problem that IO across reshape position doesn't wait for reshape, the dm-raid test shell/lvconvert-raid-reshape.sh start to hang: [root@fedora ~]# cat /proc/979/stack [<0>] wait_woken+0x7d/0x90 [<0>] raid5_make_request+0x929/0x1d70 [raid456] [<0>] md_handle_request+0xc2/0x3b0 [md_mod] [<0>] raid_map+0x2c/0x50 [dm_raid] [<0>] __map_bio+0x251/0x380 [dm_mod] [<0>] dm_submit_bio+0x1f0/0x760 [dm_mod] [<0>] __submit_bio+0xc2/0x1c0 [<0>] submit_bio_noacct_nocheck+0x17f/0x450 [<0>] submit_bio_noacct+0x2bc/0x780 [<0>] submit_bio+0x70/0xc0 [<0>] mpage_readahead+0x169/0x1f0 [<0>] blkdev_readahead+0x18/0x30 [<0>] read_pages+0x7c/0x3b0 [<0>] page_cache_ra_unbounded+0x1ab/0x280 [<0>] force_page_cache_ra+0x9e/0x130 [<0>] page_cache_sync_ra+0x3b/0x110 [<0>] filemap_get_pages+0x143/0xa30 [<0>] filemap_read+0xdc/0x4b0 [<0>] blkdev_read_iter+0x75/0x200 [<0>] vfs_read+0x272/0x460 [<0>] ksys_read+0x7a/0x170 [<0>] __x64_sys_read+0x1c/0x30 [<0>] do_syscall_64+0xc6/0x230 [<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74 This is because reshape can't make progress. For md/raid, the problem doesn't exist because register new sync_thread doesn't rely on the IO to be done any more: 1) If array is read-only, it can switch to read-write by ioctl/sysfs; 2) md/raid never set MD_RECOVERY_WAIT; 3) If MD_RECOVERY_FROZEN is set, mddev_suspend() doesn't hold 'reconfig_mutex', hence it can be cleared and reshape can continue by sysfs api 'sync_action'. However, I'm not sure yet how to avoid the problem in dm-raid yet. This patch on the one hand make sure raid_message() can't change sync_thread() through raid_message() after presuspend(), on the other hand detect the above 3 cases before wait for IO do be done in dm_suspend(), and let dm-raid requeue those IO.

In the Linux kernel, the following vulnerability has been resolved: serial: core: Clearing the circular buffer before NULLifying it The circular buffer is NULLified in uart_tty_port_shutdown() under the spin lock. However, the PM or other timer based callbacks may still trigger after this event without knowning that buffer pointer is not valid. Since the serial code is a bit inconsistent in checking the buffer state (some rely on the head-tail positions, some on the buffer pointer), it's better to have both aligned, i.e. buffer pointer to be NULL and head-tail possitions to be the same, meaning it's empty. This will prevent asynchronous calls to dereference NULL pointer as reported recently in 8250 case: BUG: kernel NULL pointer dereference, address: 00000cf5 Workqueue: pm pm_runtime_work EIP: serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809) ... ? serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809) __start_tx (drivers/tty/serial/8250/8250_port.c:1551) serial8250_start_tx (drivers/tty/serial/8250/8250_port.c:1654) serial_port_runtime_suspend (include/linux/serial_core.h:667 drivers/tty/serial/serial_port.c:63) __rpm_callback (drivers/base/power/runtime.c:393) ? serial_port_remove (drivers/tty/serial/serial_port.c:50) rpm_suspend (drivers/base/power/runtime.c:447) The proposed change will prevent ->start_tx() to be called during suspend on shut down port.

In the Linux kernel, the following vulnerability has been resolved: riscv: Sparse-Memory/vmemmap out-of-bounds fix Offset vmemmap so that the first page of vmemmap will be mapped to the first page of physical memory in order to ensure that vmemmap’s bounds will be respected during pfn_to_page()/page_to_pfn() operations. The conversion macros will produce correct SV39/48/57 addresses for every possible/valid DRAM_BASE inside the physical memory limits. v2:Address Alex's comments

In the Linux kernel, the following vulnerability has been resolved: speakup: Avoid crash on very long word In case a console is set up really large and contains a really long word (> 256 characters), we have to stop before the length of the word buffer.

In the Linux kernel, the following vulnerability has been resolved: netlink: add nla be16/32 types to minlen array BUG: KMSAN: uninit-value in nla_validate_range_unsigned lib/nlattr.c:222 [inline] BUG: KMSAN: uninit-value in nla_validate_int_range lib/nlattr.c:336 [inline] BUG: KMSAN: uninit-value in validate_nla lib/nlattr.c:575 [inline] BUG: KMSAN: uninit-value in __nla_validate_parse+0x2e20/0x45c0 lib/nlattr.c:631 nla_validate_range_unsigned lib/nlattr.c:222 [inline] nla_validate_int_range lib/nlattr.c:336 [inline] validate_nla lib/nlattr.c:575 [inline] ... The message in question matches this policy: [NFTA_TARGET_REV] = NLA_POLICY_MAX(NLA_BE32, 255), but because NLA_BE32 size in minlen array is 0, the validation code will read past the malformed (too small) attribute. Note: Other attributes, e.g. BITFIELD32, SINT, UINT.. are also missing: those likely should be added too.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value cpufreq_cpu_get may return NULL. To avoid NULL-dereference check it and return 0 in case of error. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not ASSERT() if the newly created subvolume already got read [BUG] There is a syzbot crash, triggered by the ASSERT() during subvolume creation: assertion failed: !anon_dev, in fs/btrfs/disk-io.c:1319 ------------[ cut here ]------------ kernel BUG at fs/btrfs/disk-io.c:1319! invalid opcode: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:btrfs_get_root_ref.part.0+0x9aa/0xa60 <TASK> btrfs_get_new_fs_root+0xd3/0xf0 create_subvol+0xd02/0x1650 btrfs_mksubvol+0xe95/0x12b0 __btrfs_ioctl_snap_create+0x2f9/0x4f0 btrfs_ioctl_snap_create+0x16b/0x200 btrfs_ioctl+0x35f0/0x5cf0 __x64_sys_ioctl+0x19d/0x210 do_syscall_64+0x3f/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b ---[ end trace 0000000000000000 ]--- [CAUSE] During create_subvol(), after inserting root item for the newly created subvolume, we would trigger btrfs_get_new_fs_root() to get the btrfs_root of that subvolume. The idea here is, we have preallocated an anonymous device number for the subvolume, thus we can assign it to the new subvolume. But there is really nothing preventing things like backref walk to read the new subvolume. If that happens before we call btrfs_get_new_fs_root(), the subvolume would be read out, with a new anonymous device number assigned already. In that case, we would trigger ASSERT(), as we really expect no one to read out that subvolume (which is not yet accessible from the fs). But things like backref walk is still possible to trigger the read on the subvolume. Thus our assumption on the ASSERT() is not correct in the first place. [FIX] Fix it by removing the ASSERT(), and just free the @anon_dev, reset it to 0, and continue. If the subvolume tree is read out by something else, it should have already get a new anon_dev assigned thus we only need to free the preallocated one.

In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix task hung while purging oob_skb in GC. syzbot reported a task hung; at the same time, GC was looping infinitely in list_for_each_entry_safe() for OOB skb. [0] syzbot demonstrated that the list_for_each_entry_safe() was not actually safe in this case. A single skb could have references for multiple sockets. If we free such a skb in the list_for_each_entry_safe(), the current and next sockets could be unlinked in a single iteration. unix_notinflight() uses list_del_init() to unlink the socket, so the prefetched next socket forms a loop itself and list_for_each_entry_safe() never stops. Here, we must use while() and make sure we always fetch the first socket. [0]: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 5065 Comm: syz-executor236 Not tainted 6.8.0-rc3-syzkaller-00136-g1f719a2f3fa6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 RIP: 0010:preempt_count arch/x86/include/asm/preempt.h:26 [inline] RIP: 0010:check_kcov_mode kernel/kcov.c:173 [inline] RIP: 0010:__sanitizer_cov_trace_pc+0xd/0x60 kernel/kcov.c:207 Code: cc cc cc cc 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 65 48 8b 14 25 40 c2 03 00 <65> 8b 05 b4 7c 78 7e a9 00 01 ff 00 48 8b 34 24 74 0f f6 c4 01 74 RSP: 0018:ffffc900033efa58 EFLAGS: 00000283 RAX: ffff88807b077800 RBX: ffff88807b077800 RCX: 1ffffffff27b1189 RDX: ffff88802a5a3b80 RSI: ffffffff8968488d RDI: ffff88807b077f70 RBP: ffffc900033efbb0 R08: 0000000000000001 R09: fffffbfff27a900c R10: ffffffff93d48067 R11: ffffffff8ae000eb R12: ffff88807b077800 R13: dffffc0000000000 R14: ffff88807b077e40 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564f4fc1e3a8 CR3: 000000000d57a000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <NMI> </NMI> <TASK> unix_gc+0x563/0x13b0 net/unix/garbage.c:319 unix_release_sock+0xa93/0xf80 net/unix/af_unix.c:683 unix_release+0x91/0xf0 net/unix/af_unix.c:1064 __sock_release+0xb0/0x270 net/socket.c:659 sock_close+0x1c/0x30 net/socket.c:1421 __fput+0x270/0xb80 fs/file_table.c:376 task_work_run+0x14f/0x250 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xa8a/0x2ad0 kernel/exit.c:871 do_group_exit+0xd4/0x2a0 kernel/exit.c:1020 __do_sys_exit_group kernel/exit.c:1031 [inline] __se_sys_exit_group kernel/exit.c:1029 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1029 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd5/0x270 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f9d6cbdac09 Code: Unable to access opcode bytes at 0x7f9d6cbdabdf. RSP: 002b:00007fff5952feb8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9d6cbdac09 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 RBP: 00007f9d6cc552b0 R08: ffffffffffffffb8 R09: 0000000000000006 R10: 0000000000000006 R11: 0000000000000246 R12: 00007f9d6cc552b0 R13: 0000000000000000 R14: 00007f9d6cc55d00 R15: 00007f9d6cbabe70 </TASK>

In the Linux kernel, the following vulnerability has been resolved: block: fix deadlock between bd_link_disk_holder and partition scan 'open_mutex' of gendisk is used to protect open/close block devices. But in bd_link_disk_holder(), it is used to protect the creation of symlink between holding disk and slave bdev, which introduces some issues. When bd_link_disk_holder() is called, the driver is usually in the process of initialization/modification and may suspend submitting io. At this time, any io hold 'open_mutex', such as scanning partitions, can cause deadlocks. For example, in raid: T1 T2 bdev_open_by_dev lock open_mutex [1] ... efi_partition ... md_submit_bio md_ioctl mddev_syspend -> suspend all io md_add_new_disk bind_rdev_to_array bd_link_disk_holder try lock open_mutex [2] md_handle_request -> wait mddev_resume T1 scan partition, T2 add a new device to raid. T1 waits for T2 to resume mddev, but T2 waits for open_mutex held by T1. Deadlock occurs. Fix it by introducing a local mutex 'blk_holder_mutex' to replace 'open_mutex'.

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix possible deadlock in subflow diag Syzbot and Eric reported a lockdep splat in the subflow diag: WARNING: possible circular locking dependency detected 6.8.0-rc4-syzkaller-00212-g40b9385dd8e6 #0 Not tainted syz-executor.2/24141 is trying to acquire lock: ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline] ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137 but task is already holding lock: ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at: inet_diag_dump_icsk+0x39f/0x1f80 net/ipv4/inet_diag.c:1038 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&h->lhash2[i].lock){+.+.}-{2:2}: lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] __inet_hash+0x335/0xbe0 net/ipv4/inet_hashtables.c:743 inet_csk_listen_start+0x23a/0x320 net/ipv4/inet_connection_sock.c:1261 __inet_listen_sk+0x2a2/0x770 net/ipv4/af_inet.c:217 inet_listen+0xa3/0x110 net/ipv4/af_inet.c:239 rds_tcp_listen_init+0x3fd/0x5a0 net/rds/tcp_listen.c:316 rds_tcp_init_net+0x141/0x320 net/rds/tcp.c:577 ops_init+0x352/0x610 net/core/net_namespace.c:136 __register_pernet_operations net/core/net_namespace.c:1214 [inline] register_pernet_operations+0x2cb/0x660 net/core/net_namespace.c:1283 register_pernet_device+0x33/0x80 net/core/net_namespace.c:1370 rds_tcp_init+0x62/0xd0 net/rds/tcp.c:735 do_one_initcall+0x238/0x830 init/main.c:1236 do_initcall_level+0x157/0x210 init/main.c:1298 do_initcalls+0x3f/0x80 init/main.c:1314 kernel_init_freeable+0x42f/0x5d0 init/main.c:1551 kernel_init+0x1d/0x2a0 init/main.c:1441 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242 -> #0 (k-sk_lock-AF_INET6){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 lock_sock_fast include/net/sock.h:1723 [inline] subflow_get_info+0x166/0xd20 net/mptcp/diag.c:28 tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline] tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137 inet_sk_diag_fill+0x10ed/0x1e00 net/ipv4/inet_diag.c:345 inet_diag_dump_icsk+0x55b/0x1f80 net/ipv4/inet_diag.c:1061 __inet_diag_dump+0x211/0x3a0 net/ipv4/inet_diag.c:1263 inet_diag_dump_compat+0x1c1/0x2d0 net/ipv4/inet_diag.c:1371 netlink_dump+0x59b/0xc80 net/netlink/af_netlink.c:2264 __netlink_dump_start+0x5df/0x790 net/netlink/af_netlink.c:2370 netlink_dump_start include/linux/netlink.h:338 [inline] inet_diag_rcv_msg_compat+0x209/0x4c0 net/ipv4/inet_diag.c:1405 sock_diag_rcv_msg+0xe7/0x410 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 As noted by Eric we can break the lock dependency chain avoid dumping ---truncated---

In the Linux kernel, the following vulnerability has been resolved: geneve: make sure to pull inner header in geneve_rx() syzbot triggered a bug in geneve_rx() [1] Issue is similar to the one I fixed in commit 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()") We have to save skb->network_header in a temporary variable in order to be able to recompute the network_header pointer after a pskb_inet_may_pull() call. pskb_inet_may_pull() makes sure the needed headers are in skb->head. [1] BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] BUG: KMSAN: uninit-value in geneve_rx drivers/net/geneve.c:279 [inline] BUG: KMSAN: uninit-value in geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391 IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] geneve_rx drivers/net/geneve.c:279 [inline] geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391 udp_queue_rcv_one_skb+0x1d39/0x1f20 net/ipv4/udp.c:2108 udp_queue_rcv_skb+0x6ae/0x6e0 net/ipv4/udp.c:2186 udp_unicast_rcv_skb+0x184/0x4b0 net/ipv4/udp.c:2346 __udp4_lib_rcv+0x1c6b/0x3010 net/ipv4/udp.c:2422 udp_rcv+0x7d/0xa0 net/ipv4/udp.c:2604 ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:461 [inline] ip_rcv_finish net/ipv4/ip_input.c:449 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5534 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648 process_backlog+0x480/0x8b0 net/core/dev.c:5976 __napi_poll+0xe3/0x980 net/core/dev.c:6576 napi_poll net/core/dev.c:6645 [inline] net_rx_action+0x8b8/0x1870 net/core/dev.c:6778 __do_softirq+0x1b7/0x7c5 kernel/softirq.c:553 do_softirq+0x9a/0xf0 kernel/softirq.c:454 __local_bh_enable_ip+0x9b/0xa0 kernel/softirq.c:381 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline] __dev_queue_xmit+0x2768/0x51c0 net/core/dev.c:4378 dev_queue_xmit include/linux/netdevice.h:3171 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook mm/slub.c:3819 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x5cb/0xbc0 mm/slub.c:3903 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x352/0x790 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1296 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6394 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2783 packet_alloc_skb net/packet/af_packet.c:2930 [inline] packet_snd net/packet/af_packet.c:3024 [inline] packet_sendmsg+0x70c2/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: improve CSA/ECSA connection refusal As mentioned in the previous commit, we pretty quickly found that some APs have ECSA elements stuck in their probe response, so using that to not attempt to connect while CSA is happening we never connect to such an AP. Improve this situation by checking more carefully and ignoring the ECSA if cfg80211 has previously detected the ECSA element being stuck in the probe response. Additionally, allow connecting to an AP that's switching to a channel it's already using, unless it's using quiet mode. In this case, we may just have to adjust bandwidth later. If it's actually switching channels, it's better not to try to connect in the middle of that.

In the Linux kernel, the following vulnerability has been resolved: net: netdevsim: don't try to destroy PHC on VFs PHC gets initialized in nsim_init_netdevsim(), which is only called if (nsim_dev_port_is_pf()). Create a counterpart of nsim_init_netdevsim() and move the mock_phc_destroy() there. This fixes a crash trying to destroy netdevsim with VFs instantiated, as caught by running the devlink.sh test: BUG: kernel NULL pointer dereference, address: 00000000000000b8 RIP: 0010:mock_phc_destroy+0xd/0x30 Call Trace: <TASK> nsim_destroy+0x4a/0x70 [netdevsim] __nsim_dev_port_del+0x47/0x70 [netdevsim] nsim_dev_reload_destroy+0x105/0x120 [netdevsim] nsim_drv_remove+0x2f/0xb0 [netdevsim] device_release_driver_internal+0x1a1/0x210 bus_remove_device+0xd5/0x120 device_del+0x159/0x490 device_unregister+0x12/0x30 del_device_store+0x11a/0x1a0 [netdevsim] kernfs_fop_write_iter+0x130/0x1d0 vfs_write+0x30b/0x4b0 ksys_write+0x69/0xf0 do_syscall_64+0xcc/0x1e0 entry_SYSCALL_64_after_hwframe+0x6f/0x77

In the Linux kernel, the following vulnerability has been resolved: HID: nvidia-shield: Add missing null pointer checks to LED initialization devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. [jkosina@suse.com: tweak changelog a bit]

In the Linux kernel, the following vulnerability has been resolved: pci_iounmap(): Fix MMIO mapping leak The #ifdef ARCH_HAS_GENERIC_IOPORT_MAP accidentally also guards iounmap(), which means MMIO mappings are leaked. Move the guard so we call iounmap() for MMIO mappings.

In the Linux kernel, the following vulnerability has been resolved: libbpf: Use OPTS_SET() macro in bpf_xdp_query() When the feature_flags and xdp_zc_max_segs fields were added to the libbpf bpf_xdp_query_opts, the code writing them did not use the OPTS_SET() macro. This causes libbpf to write to those fields unconditionally, which means that programs compiled against an older version of libbpf (with a smaller size of the bpf_xdp_query_opts struct) will have its stack corrupted by libbpf writing out of bounds. The patch adding the feature_flags field has an early bail out if the feature_flags field is not part of the opts struct (via the OPTS_HAS) macro, but the patch adding xdp_zc_max_segs does not. For consistency, this fix just changes the assignments to both fields to use the OPTS_SET() macro.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout While the rhashtable set gc runs asynchronously, a race allows it to collect elements from anonymous sets with timeouts while it is being released from the commit path. Mingi Cho originally reported this issue in a different path in 6.1.x with a pipapo set with low timeouts which is not possible upstream since 7395dfacfff6 ("netfilter: nf_tables: use timestamp to check for set element timeout"). Fix this by setting on the dead flag for anonymous sets to skip async gc in this case. According to 08e4c8c5919f ("netfilter: nf_tables: mark newset as dead on transaction abort"), Florian plans to accelerate abort path by releasing objects via workqueue, therefore, this sets on the dead flag for abort path too.

In the Linux kernel, the following vulnerability has been resolved: media: ir_toy: fix a memleak in irtoy_tx When irtoy_command fails, buf should be freed since it is allocated by irtoy_tx, or there is a memleak.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix variable not being completed when function returns When cmd_alloc_index(), fails cmd_work_handler() needs to complete ent->slotted before returning early. Otherwise the task which issued the command may hang: mlx5_core 0000:01:00.0: cmd_work_handler:877:(pid 3880418): failed to allocate command entry INFO: task kworker/13:2:4055883 blocked for more than 120 seconds. Not tainted 4.19.90-25.44.v2101.ky10.aarch64 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/13:2 D 0 4055883 2 0x00000228 Workqueue: events mlx5e_tx_dim_work [mlx5_core] Call trace: __switch_to+0xe8/0x150 __schedule+0x2a8/0x9b8 schedule+0x2c/0x88 schedule_timeout+0x204/0x478 wait_for_common+0x154/0x250 wait_for_completion+0x28/0x38 cmd_exec+0x7a0/0xa00 [mlx5_core] mlx5_cmd_exec+0x54/0x80 [mlx5_core] mlx5_core_modify_cq+0x6c/0x80 [mlx5_core] mlx5_core_modify_cq_moderation+0xa0/0xb8 [mlx5_core] mlx5e_tx_dim_work+0x54/0x68 [mlx5_core] process_one_work+0x1b0/0x448 worker_thread+0x54/0x468 kthread+0x134/0x138 ret_from_fork+0x10/0x18