A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.
A flaw has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This vulnerability affects the function UPnP_AV_Server_Path_Del of the file /cgi-bin/app_mgr.cgi. Executing a manipulation of the argument f_dir can lead to stack-based buffer overflow. The attack can be executed remotely. The exploit has been published and may be used.
A vulnerability has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This issue affects the function Webdav_Upload_File of the file /cgi-bin/webdav_mgr.cgi. The manipulation of the argument f_file leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was identified in Belkin F9K1015 1.00.10. This issue affects the function formReboot of the file /goform/formReboot. The manipulation of the argument webpage leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
A security vulnerability has been detected in D-Link DIR-513 1.10. This affects the function formSetPassword of the file /goform/formSetPassword of the component POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A flaw has been found in D-Link DIR-605L 2.13B01. Affected by this issue is the function formSetMACFilter of the file /goform/formSetMACFilter of the component POST Request Handler. This manipulation of the argument curTime causes buffer overflow. The attack may be initiated remotely. The exploit has been published and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability was determined in D-Link DIR-605L 2.13B01. This issue affects the function formSetDDNS of the file /goform/formSetDDNS of the component POST Request Handler. Executing a manipulation of the argument curTime can lead to buffer overflow. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.
A weakness has been identified in Belkin F9K1122 1.00.33. The impacted element is the function formSetPassword of the file /goform/formSetPassword of the component Parameter Handler. This manipulation of the argument webpage causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in Totolink LR350 9.3.5u.6369_B20220309. This vulnerability affects the function setWiFiGuestCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ssid results in buffer overflow. The attack can be launched remotely. The exploit has been made public and could be used.
A weakness has been identified in Wavlink WL-NU516U1 260227. This vulnerability affects the function ftext of the file /cgi-bin/nas.cgi. This manipulation of the argument Content-Length causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was identified in D-Link DIR-605L 2.13B01. Impacted is the function formSetLog of the file /goform/formSetLog of the component POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability was determined in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. The affected element is the function cgi_adduser_to_session of the file /cgi-bin/account_mgr.cgi. This manipulation of the argument read_list causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized.
A security flaw has been discovered in Belkin F9K1122 1.00.33. The affected element is the function formCrossBandSwitch of the file /goform/formCrossBandSwitch of the component Parameter Handler. The manipulation of the argument webpage results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
A security vulnerability has been detected in UTT HiPER 1250GW up to 3.2.7-210907-180535. This issue affects the function strcpy of the file /goform/formConfigDnsFilterGlobal of the component Parameter Handler. Such manipulation of the argument GroupName leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.
On Insteon Hub 2245-222 devices with firmware version 1012, specially crafted replies received from the PubNub service can cause buffer overflows on a global section overwriting arbitrary data. An attacker should impersonate PubNub and answer an HTTPS GET request to trigger this vulnerability. A strcpy overflows the buffer insteon_pubnub.channel_ad_r, which has a size of 16 bytes. An attacker can send an arbitrarily long "ad_r" parameter in order to exploit this vulnerability.
In WebAccess versions 8.4.1 and prior, multiple stack-based buffer overflow vulnerabilities are caused by a lack of proper validation of the length of user-supplied data. Exploitation of these vulnerabilities may allow remote code execution.
A vulnerability was found in TOTOLINK EX1800T up to 9.1.0cu.2112_B20220316. It has been declared as critical. Affected by this vulnerability is the function setWiFiExtenderConfig of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument apcliSsid leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in TOTOLINK EX1800T up to 9.1.0cu.2112_B20220316. It has been classified as critical. Affected is the function setPasswordCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument admpass leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
Multiple stack-based buffer overflows in TP-Link WR940N WiFi routers with hardware version 4 allow remote authenticated users to execute arbitrary code via the (1) ping_addr parameter to PingIframeRpm.htm or (2) dnsserver2 parameter to WanStaticIpV6CfgRpm.htm.
Stack buffer overflow in httpd in Asuswrt-Merlin firmware 380.67_0RT-AC5300 and earlier for ASUS devices and ASUS firmware for ASUS RT-AC5300, RT_AC1900P, RT-AC68U, RT-AC68P, RT-AC88U, RT-AC66U, RT-AC66U_B1, RT-AC58U, RT-AC56U, RT-AC55U, RT-AC52U, RT-AC51U, RT-N18U, RT-N66U, RT-N56U, RT-AC3200, RT-AC3100, RT_AC1200GU, RT_AC1200G, RT-AC1200, RT-AC53, RT-N12HP, RT-N12HP_B1, RT-N12D1, RT-N12+, RT_N12+_PRO, RT-N16, and RT-N300 devices allows remote attackers to execute arbitrary code on the router by sending a crafted http GET request packet that includes a long delete_offline_client parameter in the url.
On Insteon Hub 2245-222 devices with firmware version 1012, specially crafted replies received from the PubNub service can cause buffer overflows on a global section overwriting arbitrary data. An attacker should impersonate PubNub and answer an HTTPS GET request to trigger this vulnerability. A strcpy overflows the buffer insteon_pubnub.channel_ak, which has a size of 16 bytes. An attacker can send an arbitrarily long "ak" parameter in order to exploit this vulnerability.
A stack-based buffer overflow in Ivanti Connect Secure before version 22.7R2.6 allows a remote authenticated attacker to achieve remote code execution.
A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.
Use of Out-of-range Pointer Offset in GitHub repository vim/vim prior to 8.2.4440.
A flaw has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This issue affects the function UPnP_AV_Server_Path_Setting of the file /cgi-bin/app_mgr.cgi. Executing a manipulation can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been published and may be used.
A security vulnerability has been detected in LB-LINK BL-WR9000 2.4.9. The impacted element is the function sub_44D844 of the file /goform/get_hidessid_cfg. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was detected in D-Link DIR-513 1.10. The impacted element is an unknown function of the file /goform/formEasySetupWizard3. The manipulation of the argument wan_connected results in stack-based buffer overflow. The attack can be launched remotely. The exploit is now public and may be used.
A vulnerability, which was classified as critical, has been found in TOTOLINK EX1800T 9.1.0cu.2112_B20220316. This issue affects the function setRptWizardCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument loginpass leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
A security vulnerability has been detected in UTT 进取 520W 1.7.7-180627. Affected by this issue is the function strcpy of the file /goform/formUser. Such manipulation of the argument passwd1 leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability, which was classified as critical, has been found in D-Link DAP-1320 1.00. Affected by this issue is the function replace_special_char of the file /storagein.pd-XXXXXX. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability has been found in UTT 进取 520W 1.7.7-180627. This issue affects the function strcpy of the file /goform/ConfigAdvideo. The manipulation of the argument timestart leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was identified in UTT 进取 512W up to 1.7.7-171114. Impacted is the function strcpy of the file /goform/ConfigExceptMSN. Such manipulation of the argument remark leads to buffer overflow. It is possible to launch the attack remotely. The exploit is publicly available and might be used.
A security flaw has been discovered in UTT HiPER 810G up to 1.7.7-171114. This impacts the function strcpy of the file /goform/formRemoteControl. The manipulation results in buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks.
A vulnerability was detected in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/formPptpClientConfig. Performing a manipulation of the argument EncryptionMode results in buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was identified in D-Link DWR-M920 up to 1.1.50. This issue affects the function sub_464794 of the file /boafrm/formDefRoute. The manipulation of the argument submit-url leads to buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used.
A vulnerability has been found in UTT 进取 512W up to 1.7.7-171114. This affects the function strcpy of the file /goform/APSecurity. The manipulation of the argument wepkey1 leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used.
A weakness has been identified in UTT 进取 512W 1.7.7-171114. Affected is the function strcpy of the file /goform/formRemoteControl. This manipulation of the argument Profile causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
A heap buffer overflow flaw was found in QEMU's Cirrus CLGD 54xx VGA emulator's VNC display driver support before 2.9; the issue could occur when a VNC client attempted to update its display after a VGA operation is performed by a guest. A privileged user/process inside a guest could use this flaw to crash the QEMU process or, potentially, execute arbitrary code on the host with privileges of the QEMU process.
A vulnerability has been found in Totolink EX1800T 9.1.0cu.2112_B20220316 and classified as critical. This vulnerability affects the function loginAuth of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument password leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was detected in D-Link DWR-M920 up to 1.1.50. This affects the function sub_423848 of the file /boafrm/formParentControl. Performing manipulation of the argument submit-url results in buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used.
A vulnerability was detected in UTT 进取 512W 1.7.7-171114. Affected by this issue is the function strcpy of the file /goform/formFtpServerShareDirSelcet. Performing a manipulation of the argument oldfilename results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in UTT 进取 512W up to 1.7.7-171114. This vulnerability affects the function strcpy of the file /goform/formConfigNoticeConfig. The manipulation of the argument timestart results in buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used.
A security flaw has been discovered in D-Link DWR-M920 up to 1.1.50. Impacted is the function sub_42261C of the file /boafrm/formFilter. The manipulation of the argument ip6addr results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be exploited.
A vulnerability classified as critical was found in D-Link DAP-1320 1.00. Affected by this vulnerability is the function set_ws_action of the file /dws/api/. The manipulation leads to heap-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability was detected in UTT 进取 520W 1.7.7-180627. This issue affects the function strcpy of the file /goform/formSyslogConf. The manipulation of the argument ServerIp results in buffer overflow. The attack may be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A security vulnerability has been detected in UTT 进取 512W 1.7.7-171114. Affected by this vulnerability is the function strcpy of the file /goform/formConfigCliForEngineerOnly. Such manipulation of the argument addCommand leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A flaw has been found in UTT 进取 520W 1.7.7-180627. This vulnerability affects the function strcpy of the file /goform/formTaskEdit. Executing a manipulation of the argument selDateType can lead to buffer overflow. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
Stack-based buffer overflow in WFTPSRV.exe in WinFTP 2.3.0 allows remote authenticated users to execute arbitrary code via a long LIST argument beginning with an * (asterisk) character.
A vulnerability was identified in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function AP_get_wired_clientlist_setClientsName of the file mod_form.so. The manipulation of the argument clientsname_0 leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
A stack-based buffer overflow vulnerability exists in the JSON Parsing getblockschedule() functionality of Netgear RAX30 1.0.11.96 and 1.0.7.78. A specially crafted HTTP request can lead to code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.