Buffer overflow in logout.cgi in the Intelligent Platform Management Interface (IPMI) with firmware before 3.15 (SMT_X9_315) on Supermicro X9 generation motherboards allows remote authenticated users to execute arbitrary code via the SID parameter.

A vulnerability classified as critical was found in X.org Server. Affected by this vulnerability is the function _GetCountedString of the file xkb/xkb.c. The manipulation leads to buffer overflow. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211051.

A vulnerability, which was classified as critical, has been found in Tenda RX3 16.03.13.11. This issue affects the function formSetDeviceName of the file /goform/SetOnlineDevName. The manipulation of the argument devName leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

NVIDIA BMC contains a vulnerability in libwebsocket, where an authorized attacker can cause a buffer overflow and cause a denial of service or gain code execution.

A vulnerability was found in Tenda AC7 15.03.06.44. It has been rated as critical. Affected by this issue is the function formSetPPTPServer of the file /goform/SetPptpServerCfg. The manipulation of the argument pptp_server_start_ip/pptp_server_end_ip leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

IBM Engineering Systems Design Rhapsody 9.0.2, 10.0, and 10.0.1 is vulnerable to a stack-based buffer overflow, caused by improper bounds checking. A local user could overflow the buffer and execute arbitrary code on the system.

In CODESYS Control in multiple versions a improper restriction of operations within the bounds of a memory buffer allow an remote attacker with user privileges to gain full access of the device.

IBM Engineering Systems Design Rhapsody 9.0.2, 10.0, and 10.0.1 is vulnerable to a stack-based buffer overflow, caused by improper bounds checking. A local user could overflow the buffer and execute arbitrary code on the system.

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to execute code via a network. We have already fixed the vulnerability in the following version: QTS 5.1.7.2770 build 20240520 and later QuTS hero h5.1.7.2770 build 20240520 and later

ProFTPD 1.2.7 through 1.2.9rc2 does not properly translate newline characters when transferring files in ASCII mode, which allows remote attackers to execute arbitrary code via a buffer overflow using certain files.

A stack-based buffer overflow vulnerability exists in the httpd downfile.cgi functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted HTTP request can lead to remote code execution. An attacker can send an HTTP request to trigger this vulnerability.

win32k.sys in the kernel-mode drivers in Microsoft Windows Server 2003 SP2 and R2 SP2, Windows Vista SP2, Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8, Windows 8.1, Windows Server 2012 Gold and R2, and Windows RT Gold and 8.1 allows local users to gain privileges or cause a denial of service (memory corruption) via a crafted application, aka "Win32k Elevation of Privilege Vulnerability."

A stack-based buffer overflow vulnerability exists in the httpd delfile.cgi functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted HTTP request can lead to remote code execution. An attacker can send an HTTP request to trigger this vulnerability.

A vulnerability classified as critical has been found in UTT HiPER 840G up to 3.1.1-190328. This affects an unknown part of the file /goform/aspApBasicConfigUrcp. The manipulation of the argument Username leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in Tenda FH451 1.0.0.9. This vulnerability affects the function fromSafeClientFilter of the file /goform/SafeClientFilter. The manipulation of the argument Go/page leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A remote code execution vulnerability was found in the firmware used in some Lenovo printers, which can be caused by a remote user pushing an illegal string to the server-side interface via a script, resulting in a stack overflow.

A vulnerability was found in Tenda AC15 15.03.05.19_multi and classified as critical. Affected by this issue is the function formSetPPTPUserList of the file /goform/setPptpUserList of the component HTTP POST Request Handler. The manipulation of the argument list leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in UTT HiPER 1250GW up to 3.2.7-210907-180535. This affects the function strcpy of the file /goform/formNatStaticMap. Performing a manipulation of the argument NatBind results in buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used.

A vulnerability was determined in Tenda CH22 1.0.0.1. This impacts the function formQuickIndex of the file /goform/QuickIndex of the component Parameter Handler. This manipulation of the argument mit_linktype causes stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was found in D-Link DIR-605L 2.13B01. This vulnerability affects the function formAdvNetwork of the file /goform/formAdvNetwork of the component POST Request Handler. Performing a manipulation of the argument curTime results in buffer overflow. Remote exploitation of the attack is possible. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was determined in Belkin F9K1015 1.00.10. This vulnerability affects the function formWlEncrypt of the file /goform/formWlEncrypt. Executing a manipulation of the argument webpage can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Tenda F451 1.0.0.7_cn_svn7958. Impacted is the function frmL7ImForm of the file /goform/L7Im. The manipulation of the argument page leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used.

A flaw has been found in D-Link DIR-513 1.10. This issue affects the function formAdvanceSetup of the file /goform/formAdvanceSetup of the component POST Request Handler. This manipulation of the argument webpage causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been published and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A security flaw has been discovered in Tenda CH22 1.0.0.1. The impacted element is the function formCertLocalPrecreate of the file /goform/CertLocalPrecreate of the component Parameter Handler. Performing a manipulation of the argument standard results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks.

A vulnerability was identified in Trendnet TEW-657BRM 1.00.1. The affected element is the function add_apcdb of the file /setup.cgi. The manipulation of the argument mac_pc_dba leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit is publicly available and might be used. The vendor confirms, that "[t]he product in question (...) has been discontinued and end of life since June 23, 2011, that is more than 14 years ago. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on our website's product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was detected in D-Link DIR-513 1.10. This vulnerability affects the function formSetRoute of the file /goform/formSetRoute of the component POST Request Handler. The manipulation of the argument curTime results in buffer overflow. The attack may be performed from remote. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was determined in Tenda CH22 1.0.0.1. Affected is the function formWebTypeLibrary of the file /goform/webtypelibrary of the component Parameter Handler. This manipulation of the argument webSiteId causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was detected in Belkin F9K1122 1.00.33. Affected is the function formWlanSetup of the file /goform/formWlanSetup. The manipulation of the argument webpage results in stack-based buffer overflow. The attack may be performed from remote. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A memory corruption vulnerability in Palo Alto Networks PAN-OS GlobalProtect Clientless VPN enables an authenticated attacker to execute arbitrary code with root user privileges during SAML authentication. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.20; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14; PAN-OS 9.1 versions earlier than PAN-OS 9.1.9; PAN-OS 10.0 versions earlier than PAN-OS 10.0.1. Prisma Access customers with Prisma Access 2.1 Preferred firewalls are impacted by this issue.

A flaw has been found in Tenda M3 1.0.0.10. This vulnerability affects the function setAdvPolicyData of the file /goform/setAdvPolicyData of the component Destination Handler. Executing a manipulation of the argument policyType can lead to buffer overflow. The attack can be executed remotely. The exploit has been published and may be used.

A flaw has been found in Tenda F453 1.0.0.3. This affects the function fromPPTPUserSetting of the file /goform/PPTPUserSetting of the component httpd. This manipulation of the argument delno causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used.

Multiple buffer overflows in the (1) SNMP and (2) License Manager implementations in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(5) and 6.x before 6.1(1) and MDS 9000 devices 4.x and 5.x before 5.2(5) allow remote authenticated users to execute arbitrary code via a crafted SNMP request, aka Bug ID CSCtx54830.

A security vulnerability has been detected in Totolink N300RH 3.2.4-B20220812. This affects the function setWanConfig of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. The manipulation of the argument priDns leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used.

A vulnerability has been found in Totolink X5000R 9.1.0u.6369_B20230113. This vulnerability affects the function sub_458E40 of the file /boafrm/formDdns. The manipulation of the argument submit-url leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.

A vulnerability was determined in Totolink WA300 5.2cu.7112_B20190227. This issue affects the function UploadCustomModule of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. Executing a manipulation of the argument File can lead to buffer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability has been found in Tenda F1202 1.2.0.20(408). Affected is the function fromPPTPUserSetting of the file /goform/PPTPUserSetting. Such manipulation of the argument delno leads to stack-based buffer overflow. The attack may be performed from remote. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in D-Link DIR-605L 2.13B01. This affects the function formAdvFirewall of the file /goform/formAdvFirewall of the component POST Request Handler. Such manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A security flaw has been discovered in Tenda CX12L 16.03.53.12. This vulnerability affects the function fromRouteStatic of the file /goform/RouteStatic. The manipulation of the argument page results in stack-based buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was detected in Tenda AC5 15.03.06.47. This affects the function fromAddressNat of the file /goform/addressNat of the component POST Request Handler. The manipulation of the argument page results in stack-based buffer overflow. The attack can be launched remotely. The exploit is now public and may be used.

A vulnerability was identified in Tenda F451 1.0.0.7_cn_svn7958. This affects the function fromSafeUrlFilter of the file /goform/SafeUrlFilter. Such manipulation of the argument page leads to stack-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used.

A vulnerability was determined in Wavlink WL-WN579X3-C 231124. This impacts the function sub_4019FC of the file /cgi-bin/firewall.cgi of the component UPNP Handler. Executing a manipulation of the argument UpnpEnabled can lead to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Belkin F9K1015 1.00.10. This affects the function formCrossBandSwitch of the file /goform/formCrossBandSwitch. Performing a manipulation of the argument webpage results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

Buffer overflow in the SNMP implementation in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(5) and 6.x before 6.1(1) and MDS 9000 devices 4.x and 5.x before 5.2(5) allows remote authenticated users to execute arbitrary code via a crafted SNMP request, aka Bug ID CSCtx54822.

Multiple buffer overflow security vulnerabilities have been identified in HPE iLO Amplifier Pack version(s): Prior to 2.12. These vulnerabilities could be exploited by a highly privileged user to remotely execute code that could lead to a loss of confidentiality, integrity, and availability. HPE has provided a software update to resolve this vulnerability in HPE iLO Amplifier Pack.

A vulnerability was detected in D-Link DI-8100 16.07.26A1. Affected by this issue is the function tggl_asp of the file /tggl.asp of the component HTTP Request Handler. Performing a manipulation of the argument Name results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.

A vulnerability was found in H3C Magic B0 up to 100R002. This affects the function Edit_BasicSSID_5G of the file /goform/aspForm. Performing a manipulation of the argument param results in buffer overflow. The attack may be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

The issue was addressed with improved memory handling. This issue is fixed in macOS Sequoia 15.5, macOS Sonoma 14.7.6. Connecting to a malicious AFP server may corrupt kernel memory.

A vulnerability was found in Tenda F1202 1.2.0.20(408). Affected by this vulnerability is the function formWrlExtraSet of the file /goform/WrlExtraSet. Performing a manipulation of the argument delno results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been made public and could be used.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects R6700v3 before 1.0.4.98, R6400v2 before 1.0.4.98, R7000 before 1.0.11.106, R6900P before 1.3.2.124, R7000P before 1.3.2.124, R7900 before 1.0.4.26, R7850 before 1.0.5.60, R8000 before 1.0.4.58, RS400 before 1.5.0.48, R6400 before 1.0.1.62, R6700 before 1.0.2.16, R6900 before 1.0.2.16, MK60 before 1.0.5.102, MR60 before 1.0.5.102, MS60 before 1.0.5.102, CBR40 before 2.5.0.10, R8000P before 1.4.1.62, R7960P before 1.4.1.62, R7900P before 1.4.1.62, RAX15 before 1.0.1.64, RAX20 before 1.0.1.64, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, RAX200 before 1.0.2.102, RAX45 before 1.0.2.64, RAX50 before 1.0.2.64, EX7500 before 1.0.0.68, EAX80 before 1.0.1.62, EAX20 before 1.0.0.36, RBK752 before 3.2.16.6, RBK753 before 3.2.16.6, RBK753S before 3.2.16.6, RBK754 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBK853 before 3.2.16.6, RBK854 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RBR840 before 3.2.16.6, RBS840 before 3.2.16.6, R6120 before 1.0.0.70, R6220 before 1.1.0.100, R6230 before 1.1.0.100, R6260 before 1.1.0.76, R6850 before 1.1.0.76, R6350 before 1.1.0.76, R6330 before 1.1.0.76, D7800 before 1.0.1.58, RBK50 before 2.6.1.40, RBR50 before 2.6.1.40, RBS50 before 2.6.1.40, RBK40 before 2.6.1.36, RBR40 before 2.6.1.36, RBS40 before 2.6.1.38, RBK23 before 2.6.1.36, RBR20 before 2.6.1.38, RBS20 before 2.6.1.38, RBK12 before 2.6.1.44, RBK13 before 2.6.1.44, RBK14 before 2.6.1.44, RBK15 before 2.6.1.44, RBR10 before 2.6.1.44, RBS10 before 2.6.1.44, R6800 before 1.2.0.72, R6900v2 before 1.2.0.72, R6700v2 before 1.2.0.72, R7200 before 1.2.0.72, R7350 before 1.2.0.72, R7400 before 1.2.0.72, R7450 before 1.2.0.72, AC2100 before 1.2.0.72, AC2400 before 1.2.0.72, AC2600 before 1.2.0.72, R7800 before 1.0.2.74, R8900 before 1.0.5.24, R9000 before 1.0.5.24, RAX120 before 1.0.1.136, XR450 before 2.3.2.66, XR500 before 2.3.2.66, XR700 before 1.0.1.34, and XR300 before 1.0.3.50.