Cisco IOS 12.2T, 12.3 and 12.3T, when processing an ISAKMP profile that specifies XAUTH authentication after Phase 1 negotiation, may not process certain attributes in the ISAKMP profile that specifies XAUTH, which allows remote attackers to bypass XAUTH and move to Phase 2 negotiations.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Cisco IOS 12.2T, 12.3 and 12.3T, when using Easy VPN Server XAUTH version 6 authentication, allows remote attackers to bypass authentication via a "malformed packet."

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

Cisco devices running Application and Content Networking System (ACNS) 4.x, 5.0, 5.1, or 5.2 use a default password when the setup dialog has not been run, which allows remote attackers to gain access.

Cisco IP/VC Videoconferencing System 3510, 3520, 3525 and 3530 contain hard-coded default SNMP community strings, which allows remote attackers to gain access, cause a denial of service, and modify configuration.

The Transaction Language 1 (TL1) login interface in Cisco ONS 15327 4.6(0) and 4.6(1) and 15454 and 15454 SDH 4.6(0) and 4.6(1), when a user account is configured with a blank password, allows remote attackers to gain unauthorized access by logging in with a password larger than 10 characters.

Cisco Secure Access Control Server (ACS) 3.2(3) and earlier spawns a separate unauthenticated TCP connection on a random port when a user authenticates to the ACS GUI, which allows remote attackers to bypass authentication by connecting to that port from the same IP address.

Cisco IOS 12.1(3) and 12.1(3)T allows remote attackers to read and modify device configuration data via the cable-docsis read-write community string used by the Data Over Cable Service Interface Specification (DOCSIS) standard.

Cisco Unity 2.x, 3.x, and 4.x, when integrated with Microsoft Exchange, has several hard coded usernames and passwords, which allows remote attackers to gain unauthorized access and change configuration settings or read outgoing or incoming e-mail messages.

Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not properly handle the implicit "deny ip any any" rule in an outgoing ACL when the ACL contains exactly 448 entries, which can allow some outgoing packets to bypass access restrictions.

Cisco EPC3928 devices with EDVA 5.5.10, 5.5.11, and 5.7.1 allow remote attackers to bypass an intended authentication requirement and execute unspecified administrative functions via a crafted HTTP request, aka Bug ID CSCux24941.

Cisco Personal Assistant 1.4(1) and 1.4(2) disables password authentication when "Allow Only Cisco CallManager Users" is enabled and the Corporate Directory settings refer to the directory service being used by Cisco CallManager, which allows remote attackers to gain access with a valid username.

Buffer overflow in the authentication module for Cisco ACNS 4.x before 4.2.11, and 5.x before 5.0.5, allows remote attackers to execute arbitrary code via a long password.

Multiple vulnerabilities in the H.323 protocol implementation for Cisco IOS 11.3T through 12.2T allow remote attackers to cause a denial of service and possibly execute arbitrary code, as demonstrated by the NISCC/OUSPG PROTOS test suite for the H.225 protocol.

The Session Initiation Protocol (SIP) implementation in multiple Cisco products including IP Phone models 7940 and 7960, IOS versions in the 12.2 train, and Secure PIX 5.2.9 to 6.2.2 allows remote attackers to cause a denial of service and possibly execute arbitrary code via crafted INVITE messages, as demonstrated by the OUSPG PROTOS c07-sip test suite.

Cisco VPN 3000 series concentrators and Cisco VPN 3002 Hardware Client 3.5.x through 4.0.REL, when enabling IPSec over TCP for a port on the concentrator, allow remote attackers to reach the private network without authentication.

Buffer overflow in the HTTP server for Cisco IOS 12.2 and earlier allows remote attackers to execute arbitrary code via an extremely long (2GB) HTTP GET request.

Buffer overflow in Cisco IOS 11.2.x to 12.0.x allows remote attackers to cause a denial of service and possibly execute commands via a large number of OSPF neighbor announcements.

Cisco Unity 2.x and 3.x uses well-known default user accounts, which could allow remote attackers to gain access and place arbitrary calls.

Cross-site scripting vulnerability in CiscoSecure ACS 3.0 allows remote attackers to execute arbitrary script or HTML as other web users via the action argument in a link to setup.exe.

The original patch for the Cisco Content Service Switch 11000 Series authentication bypass vulnerability (CVE-2001-0622) was incomplete, which still allows remote attackers to gain additional privileges by directly requesting the web management URL instead of navigating through the interface, possibly via a variant of the original attack, as identified by Cisco bug ID CSCdw08549.

The encryption algorithms for enable and passwd commands on Cisco PIX Firewall can be executed quickly due to a limited number of rounds, which make it easier for an attacker to decrypt the passwords using brute force techniques.

Cisco VPN 3000 Concentrator 2.2.x, and 3.x before 3.5.1, allows restricted administrators to obtain user passwords that are stored in plaintext in HTML source code.

Cisco VPN 3000 Concentrator 2.2.x, and 3.x before 3.5.2, allows restricted administrators to obtain certificate passwords that are stored in plaintext in the HTML source code for Certificate Management pages.

Cisco Virtual Private Network (VPN) Client software 2.x.x, and 3.x before 3.5.1C, does not properly verify that certificate DN fields match those of the certificate from the VPN Concentrator, which allows remote attackers to conduct man-in-the-middle attacks.

Cisco VPN 3000 Concentrator 3.6(Rel) and earlier, and 2.x.x, when configured to use internal authentication with group accounts and without any user accounts, allows remote VPN clients to log in using PPTP or IPSEC user authentication.

A vulnerability in the web framework code of Cisco Integrated Management Controller (IMC) Supervisor could allow an unauthenticated, remote attacker to execute arbitrary SQL queries. The vulnerability is due to a lack of proper validation of user-supplied input in SQL queries. An attacker could exploit this vulnerability by sending crafted URLs that contain malicious SQL statements to the affected application.

Format string vulnerability in the administration function in Cisco Secure Access Control Server (ACS) for Windows, 2.6.x and earlier and 3.x through 3.01 (build 40), allows remote attackers to crash the CSADMIN module only (denial of service of administration function) or execute arbitrary code via format strings in the URL to port 2002.

Cisco switches and routers running CBOS 2.3.8 and earlier use predictable TCP Initial Sequence Numbers (ISN), which allows remote attackers to spoof or hijack TCP connections.

Cisco 12000 with IOS 12.0 and lines card based on Engine 2 does not properly handle an outbound ACL when an input ACL is not configured on all the interfaces of a multi port line card, which could allow remote attackers to bypass the intended access controls.

A vulnerability in the install function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to access the administrative web interface using a default hard-coded username and password that are used during install. The vulnerability is due to a hard-coded password that, in some cases, is not replaced with a unique password. A successful exploit could allow the attacker to access the administrative web interface with administrator-level privileges.

Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not properly filter does not properly filter packet fragments even when the "fragment" keyword is used in an ACL, which allows remote attackers to bypass the intended access controls.

Cisco 6400 Access Concentrator Node Route Processor 2 (NRP2) 12.1DC card does not properly disable access when a password has not been set for vtys, which allows remote attackers to obtain access via telnet.

The mailguard feature in Cisco Secure PIX Firewall 5.2(2) and earlier does not properly restrict access to SMTP commands, which allows remote attackers to execute restricted commands by sending a DATA command before sending the restricted commands.

A vulnerability in the Cisco SD-WAN Solution could allow an unauthenticated, remote attacker to bypass certificate validation on an affected device. The vulnerability is due to improper certificate validation. An attacker could exploit this vulnerability by supplying a system image signed with a crafted certificate to an affected device, bypassing the certificate validation. An exploit could allow an attacker to deploy a crafted system image.

The Cisco Web Management interface in routers running CBOS 2.4.1 and earlier does not log invalid logins, which allows remote attackers to guess passwords without detection.

The FTP server on Cisco Content Service 11000 series switches (CSS) before WebNS 4.01B23s and WebNS 4.10B13s allows an attacker who is an FTP user to read and write arbitrary files via GET or PUT commands.

The web management service on Cisco Content Service series 11000 switches (CSS) before WebNS 4.01B29s or WebNS 4.10B17s allows a remote attacker to gain additional privileges by directly requesting the web management URL instead of navigating through the interface.

A vulnerability in which the HTTP web server for Cisco Prime Infrastructure (PI) has unrestricted directory permissions could allow an unauthenticated, remote attacker to upload an arbitrary file. This file could allow the attacker to execute commands at the privilege level of the user prime. This user does not have administrative or root privileges. The vulnerability is due to an incorrect permission setting for important system directories. An attacker could exploit this vulnerability by uploading a malicious file by using TFTP, which can be accessed via the web-interface GUI. A successful exploit could allow the attacker to run commands on the targeted application without authentication.

CiscoSecure ACS Server 2.4(2) and earlier allows remote attackers to bypass LDAP authentication on the server if the LDAP server allows null passwords.

Cisco Virtual Central Office 4000 (VCO/4K) uses weak encryption to store usernames and passwords in the SNMP MIB, which allows an attacker who knows the community name to crack the password and gain privileges.

A vulnerability in the web framework code of Cisco Prime License Manager (PLM) could allow an unauthenticated, remote attacker to execute arbitrary SQL queries. The vulnerability is due to a lack of proper validation of user-supplied input in SQL queries. An attacker could exploit this vulnerability by sending crafted HTTP POST requests that contain malicious SQL statements to an affected application. A successful exploit could allow the attacker to modify and delete arbitrary data in the PLM database or gain shell access with the privileges of the postgres user.

Check Point Firewall-1 allows remote attackers to bypass port access restrictions on an FTP server by forcing it to send malicious packets that Firewall-1 misinterprets as a valid 227 response to a client's PASV attempt.

A vulnerability in the Stealthwatch Management Console (SMC) of Cisco Stealthwatch Enterprise could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected system. The vulnerability is due to an insecure system configuration. An attacker could exploit this vulnerability by sending a crafted HTTP request to the targeted application. An exploit could allow the attacker to gain unauthenticated access, resulting in elevated privileges in the SMC.

By design, the "established" command on the Cisco PIX firewall allows connections from one host to arbitrary ports of a target host if an alternative conduit has already been allowed, which can cause administrators to configure less restrictive access controls than intended if they do not understand this functionality.

Vulnerability in Cisco IOS 11.1CC and 11.1CT with distributed fast switching (DFS) enabled allows remote attackers to bypass certain access control lists when the router switches traffic from a DFS-enabled interface to an interface that does not have DFS enabled, as described by Cisco bug CSCdk35564.

Cisco IOS 9.1 and earlier does not properly handle extended IP access lists when the IP route cache is enabled and the "established" keyword is set, which could allow attackers to bypass filters.

Some classic Cisco IOS devices have a vulnerability in the PPP CHAP authentication to establish unauthorized PPP connections.

In Cisco IOS 10.3, with the tacacs-ds or tacacs keyword, an extended IP access control list could bypass filtering.