The administrative web interface on the Netgear DG632 with firmware 3.4.0_ap allows remote attackers to cause a denial of service (web outage) via an HTTP POST request to cgi-bin/firmwarecfg.

The web management interface in Netgear WGR614v9 allows remote attackers to cause a denial of service (crash) via a request that contains a question mark ("?").

NETGEAR ProSafe GS724Tv3 and GS716Tv2 with firmware 5.4.1.13 and earlier, GS748Tv4 5.4.1.14, and GS510TP 5.0.4.4 allows remote attackers to cause a denial of service (reboot or crash) via a crafted HTTP request to filesystem/.

Netgear FVG318 running firmware 1.0.40 allows remote attackers to cause a denial of service (router reset) via TCP packets with bad checksums.

Netgear RP114, and possibly other versions and devices, allows remote attackers to cause a denial of service via a SYN flood attack between one system on the internal interface and another on the external interface, which temporarily stops routing between the interfaces, as demonstrated using nmap.

Buffer overflow in ACME micro_httpd, as used in D-Link DSL2750U and DSL2740U and NetGear WGR614 and MR-ADSL-DG834 routers allows remote attackers to cause a denial of service (crash) via a long string in the URI in a GET request.

cgi-bin/welcome/VPN_only in the web interface in Netgear SSL312 allows remote attackers to cause a denial of service (device crash) via a crafted query string, as demonstrated using directory traversal sequences.

NETGEAR NMS300 devices before 1.6.0.27 are affected by denial of service.

Cisco IOS 15.0 through 15.5 and IOS XE 3.3 through 3.16 allow remote attackers to cause a denial of service (device reload) via a crafted DHCPv6 Relay message, aka Bug ID CSCus55821.

The Smart Install client implementation in Cisco IOS 12.2, 15.0, and 15.2 and IOS XE 3.2 through 3.7 allows remote attackers to cause a denial of service (device reload) via crafted image list parameters in a Smart Install packet, aka Bug ID CSCuv45410.

NetGear WNDR4700 Media Server devices with firmware 1.0.0.34 allow remote attackers to cause a denial of service (device crash).

Cisco TelePresence Server 3.1 on 7010, Mobility Services Engine (MSE) 8710, Multiparty Media 310 and 320, and Virtual Machine (VM) devices allows remote attackers to cause a denial of service (device reload) via malformed STUN packets, aka Bug ID CSCuv01348.

Cisco NX-OS 4.0 through 6.1 on Nexus 1000V 3000, 4000, 5000, 6000, and 7000 devices and Unified Computing System (UCS) platforms allows remote attackers to cause a denial of service (TCP stack reload) by sending crafted TCP packets to a device that has a TIME_WAIT TCP session, aka Bug ID CSCub70579.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects R6200v2 before 1.0.3.14, R6250 before 1.0.4.8, R6300v2 before 1.0.4.8, R6700 before 1.1.1.20, R7000 before 1.0.7.10, R7000P/R6900P before 1.0.0.56, R7100LG before 1.0.0.30, R7900 before 1.0.1.14, R8000 before 1.0.3.22, R8500 before 1.0.2.74, and D8500 before 1.0.3.28.

The Marvell driver for the Netgear WN802T Wi-Fi access point with firmware 1.3.16 on the Marvell 88W8361P-BEM1 chipset does not properly parse EAPoL-Key packets, which allows remote authenticated users to cause a denial of service (device reboot or hang) or possibly execute arbitrary code via a malformed EAPoL-Key packet with a crafted "advertised length."

Certain NETGEAR devices are affected by denial of service. This affects GS110EMX before 1.0.0.9, GS810EMX before 1.0.0.5, XS512EM before 1.0.0.6, and XS724EM before 1.0.0.6.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects D3600 before 1.0.0.76 and D6000 before 1.0.0.76.

handle_daylightsaving.php in NUUO NVRmini 2 1.7.5 through 3.0.0, NUUO NVRsolo 1.0.0 through 3.0.0, NUUO Crystal 2.2.1 through 3.2.0, and NETGEAR ReadyNAS Surveillance 1.1.1 through 1.4.1 allows remote attackers to execute arbitrary PHP code via the NTPServer parameter.

__debugging_center_utils___.php in NUUO NVRmini 2 1.7.5 through 3.0.0, NUUO NVRsolo 1.7.5 through 3.0.0, and NETGEAR ReadyNAS Surveillance 1.1.1 through 1.4.1 allows remote attackers to execute arbitrary PHP code via the log parameter.

The NETGEAR WNR2000v5 router allows an administrator to perform sensitive actions by invoking the apply.cgi URL on the web server of the device. This special URL is handled by the embedded web server (uhttpd) and processed accordingly. The web server also contains another URL, apply_noauth.cgi, that allows an unauthenticated user to perform sensitive actions on the device. This functionality can be exploited to change the router settings (such as the answers to the password-recovery questions) and achieve remote code execution.

NETGEAR XR500 devices before 2.3.2.32 are affected by remote code execution by unauthenticated attackers.

Certain NETGEAR devices are affected by denial of service. This affects R6100 before 1.0.1.22, R7500 before 1.0.0.122, R7800 before 1.0.2.42, R8900 before 1.0.3.10, R9000 before 1.0.3.10, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.54, WNDR4500v3 before 1.0.0.54, and WNR2000v5 before 1.0.0.64.

The Marvell driver for the Netgear WN802T Wi-Fi access point with firmware 1.3.16 on the Marvell 88W8361P-BEM1 chipset does not properly parse the SSID information element in an association request, which allows remote authenticated users to cause a denial of service (device reboot or hang) or possibly execute arbitrary code via a "Null SSID."

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects EX3700 before 1.0.0.64, EX3800 before 1.0.0.64, EX6000 before 1.0.0.24, EX6130 before 1.0.0.16, EX6400 before 1.0.1.60, EX7000 before 1.0.0.50, EX7300 before 1.0.1.60, and WN2500RPv2 before 1.0.1.46.

NETGEAR NMS300 devices before 1.6.0.27 are affected by command injection by an authenticated user.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects R6700v2 before 1.1.0.38, R6800 before 1.1.0.38, D7000 before 1.0.1.50, and D1500 before 1.0.0.25.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects D6220 before 1.0.0.28, D6400 before 1.0.0.60, D7000 before 1.0.1.52, D7000v2 before 1.0.0.38, D7800 before 1.0.1.24, D8500 before 1.0.3.29, JNR1010v2 before 1.1.0.44, JR6150 before 1.0.1.14, JWNR2010v5 before 1.1.0.44, PR2000 before 1.0.0.20, R6050 before 1.0.1.14, R6220 before 1.1.0.60, R6400 before 1.1.0.26, R6400v2 before 1.0.2.46, R6700v2 before 1.2.0.2, R6800 before 1.2.0.2, R6900v2 before 1.2.0.2, R7100LG before 1.0.0.32, R7300DST before 1.0.0.56, R7500 before 1.0.0.112, R7500v2 before 1.0.3.24, R7800 before 1.0.2.36, R7900P before 1.1.4.6, R8000P before 1.1.4.6, R8300 before 1.0.2.104, R8500 before 1.0.2.104, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.94, WNDR3700v5 before 1.1.0.50, WNDR4300v1 before 1.0.2.96, WNDR4300v2 before 1.0.0.52, WNDR4500v3 before 1.0.0.52, WNR1000v4 before 1.1.0.44, WNR2020 before 1.1.0.44, and WNR2050 before 1.1.0.44.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects JNR1010v2 before 1.1.0.42, JR6150 before 1.0.1.10, JWNR2010v5 before 1.1.0.42, PR2000 before 1.0.0.18, R6050 before 1.0.1.10, R6120 before 1.0.0.30, R6220 before 1.1.0.50, R6700v2 before 1.2.0.4, R6800 before 1.2.0.4, R6900v2 before 1.2.0.4, WNDR3700v5 before 1.1.0.48, WNR1000v4 before 1.1.0.42, WNR2020 before 1.1.0.42, and WNR2050 before 1.1.0.42.

NETGEAR R7800 devices before 1.0.2.30 are affected by incorrect configuration of security settings.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects D6100 before 1.0.0.55, D7800 before V1.0.1.24, R7100LG before V1.0.0.32, WNDR4300v1 before 1.0.2.90, and WNDR4500v3 before 1.0.0.48.

Certain NETGEAR devices are affected by denial of service. This affects M4300-28G before 12.0.2.15, M4300-52G before 12.0.2.15, M4300-28G-POE+ before 12.0.2.15, M4300-52G-POE+ before 12.0.2.15, M4300-8X8F before 12.0.2.15, M4300-12X12F before 12.0.2.15, M4300-24X24F before 12.0.2.15, M4300-24X before 12.0.2.15, M4300-48X before 12.0.2.15, and M4200 before 12.0.2.15.

The Traffic Management Microkernel (TMM) in F5 BIG-IP LTM, APM, ASM, Edge Gateway, GTM, Link Controller, and WOM 10.0.0 through 10.2.2 and 11.0.0; Analytics 11.0.0; PSM 9.4.0 through 9.4.8, 10.0.0 through 10.2.4, and 11.0.0 through 11.4.1; and WebAccelerator 9.4.0 through 9.4.8, 10.0.0 through 10.2.4, and 11.0.0 through 11.3.0 might change a TCP connection to the ESTABLISHED state before receiving the ACK packet, which allows remote attackers to cause a denial of service (SIGFPE or assertion failure and TMM restart) via unspecified vectors.

In Wireshark 2.2.0 to 2.2.6 and 2.0.0 to 2.0.12, the openSAFETY dissector could crash or exhaust system memory. This was addressed in epan/dissectors/packet-opensafety.c by checking for a negative length.

Cisco IOS XE 3.4 before 3.4.2S and 3.5 before 3.5.1S on 1000 ASR devices allows remote attackers to cause a denial of service (device reload) via malformed ICMP error packets associated with a (1) TCP or (2) UDP session that is under inspection by the Zone-Based Firewall (ZBFW) component, aka Bug ID CSCtt26470.

The T1/E1 driver-queue functionality in Cisco IOS 12.2 and 15.0 through 15.3, when an HDLC32 driver is used, allows remote attackers to cause a denial of service (interface queue wedge) via bursty network traffic, aka Bug ID CSCub67465.

The DNS-over-TCP implementation in Cisco IOS 12.2 and 15.0 through 15.3, when NAT is used, allows remote attackers to cause a denial of service (device reload) via a crafted IPv4 DNS TCP stream, aka Bug ID CSCuf28733.

Triangle Research International (aka Tri) Nano-10 PLC devices with firmware r81 and earlier do not properly handle large length values in MODBUS data, which allows remote attackers to cause a denial of service (transition to the interrupt state) via a crafted packet to TCP port 502.

Huawei firewall products USG9500 V500R001C50 has a DoS vulnerability.A remote attacker who controls the peer device could exploit the vulnerability by sending malformed IKE packets to the target device. Successful exploit of the vulnerability could cause the device to restart.

The NFSv2/NFSv3 server in the nfsd subsystem in the Linux kernel through 4.10.11 allows remote attackers to cause a denial of service (system crash) via a long RPC reply, related to net/sunrpc/svc.c, fs/nfsd/nfs3xdr.c, and fs/nfsd/nfsxdr.c.

iSmartAlarm cube devices allow Denial of Service. Sending a SYN flood on port 12345 will freeze the "cube" and it will stop responding.

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Link Controller, PEM and WebSafe software version 13.0.0 and 12.1.0 - 12.1.2, undisclosed HTTP requests may cause a denial of service.

Under certain conditions for F5 BIG-IP systems 13.0.0 or 12.1.0 - 12.1.3.1, using FastL4 profiles, when the Reassemble IP Fragments option is disabled (default), some specific large fragmented packets may restart the Traffic Management Microkernel (TMM).

In F5 BIG-IP APM software version 13.0.0 and 12.1.2, in some circumstances, APM tunneled VPN flows can cause a VPN/PPP connflow to be prematurely freed or cause TMM to stop responding with a "flow not in use" assertion. An attacker may be able to disrupt traffic or cause the BIG-IP system to fail over to another device in the device group.

A Remote Arbitrary Code Execution vulnerability in HPE Data Protector version prior to 8.17 and 9.09 was found.

Citrix NetScaler Application Delivery Controller (ADC) 10.0 before 10.0-76.7 allows remote attackers to cause a denial of service (nsconfigd crash and appliance reboot) via a crafted request.

The TCP reassembly feature in Cisco IOS XE 3.7 before 3.7.3S and 3.8 before 3.8.1S on 1000 ASR devices allows remote attackers to cause a denial of service (device reload) via large TCP packets that are processed by the (1) NAT or (2) ALG component, aka Bug ID CSCud72509.

The web framework on Cisco Web Security Appliance (WSA), Email Security Appliance (ESA), and Content Security Management Appliance (SMA) devices does not properly manage the state of HTTP and HTTPS sessions, which allows remote attackers to cause a denial of service (management GUI outage) via multiple TCP connections, aka Bug IDs CSCuj59411, CSCuf89818, and CSCuh05635.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.3 E0504P04 was found.

Cisco IOS 15.0 through 15.3 and IOS XE 3.2 through 3.8, when a VRF interface exists, allows remote attackers to cause a denial of service (interface queue wedge) via crafted UDP RSVP packets, aka Bug ID CSCuf17023.

Cisco IOS 12.2 through 12.4 and 15.0 through 15.3, and IOS XE 2.1 through 3.9, allows remote attackers to cause a denial of service (device reload) via crafted DHCP packets that are processed locally by a (1) server or (2) relay agent, aka Bug ID CSCug31561.