Cisco IOS 2.2(18)EW, 12.2(18)EWA, 12.2(14)SZ, 12.2(18)S, 12.2(18)SE, 12.2(18)SV, 12.2(18)SW, and other versions without the "no service dhcp" command, keep undeliverable DHCP packets in the queue instead of dropping them, which allows remote attackers to cause a denial of service (dropped traffic) via multiple undeliverable DHCP packets that exceed the input queue size.
Cisco Internetwork Operating System (IOS) 12.0S through 12.3T attempts to process SNMP solicited operations on improper ports (UDP 162 and a randomly chosen UDP port), which allows remote attackers to cause a denial of service (device reload and memory corruption).
The CSAdmin web administration interface for Cisco Secure Access Control Server (ACS) 3.2(2) build 15 allows remote attackers to cause a denial of service (hang) via a flood of TCP connections to port 2002.
The SSL/TLS handshaking code in OpenSSL 0.9.7a, 0.9.7b, and 0.9.7c, when using Kerberos ciphersuites, does not properly check the length of Kerberos tickets during a handshake, which allows remote attackers to cause a denial of service (crash) via a crafted SSL/TLS handshake that causes an out-of-bounds read.
Cisco CatOS 5.x before 5.5(20) through 8.x before 8.2(2) and 8.3(2)GLX, as used in Catalyst switches, allows remote attackers to cause a denial of service (system crash and reload) by sending invalid packets instead of the final ACK portion of the three-way handshake to the (1) Telnet, (2) HTTP, or (3) SSH services, aka "TCP-ACK DoS attack."
Cisco ONS 15327 before 4.1(3), ONS 15454 before 4.6(1), and ONS 15454 SD before 4.1(3) allows remote attackers to cause a denial of service (reset) by not sending the ACK portion of the TCP three-way handshake and sending an invalid response instead.
Cisco 11000 Series Content Services Switches (CSS) running WebNS 5.0(x) before 05.0(04.07)S, and 6.10(x) before 06.10(02.05)S allow remote attackers to cause a denial of service (device reset) via a malformed packet to UDP port 5002.
The do_change_cipher_spec function in OpenSSL 0.9.6c to 0.9.6k, and 0.9.7a to 0.9.7c, allows remote attackers to cause a denial of service (crash) via a crafted SSL/TLS handshake that triggers a null dereference.
OpenSSL 0.9.6k allows remote attackers to cause a denial of service (crash via large recursion) via malformed ASN.1 sequences.
The Service Assurance Agent (SAA) in Cisco IOS 12.0 through 12.2, aka Response Time Reporter (RTR), allows remote attackers to cause a denial of service (crash) via malformed RTR packets to port 1967.
Cisco Firewall Services Module (FWSM) in Cisco Catalyst 6500 and 7600 series devices allows remote attackers to cause a denial of service (crash and reload) via an SNMPv3 message when snmp-server is set.
Cisco ONS15454 and ONS15327 running ONS before 3.4 allows attackers to cause a denial of service (reset) via an HTTP request to the TCC, TCC+ or XTC, in which the request contains an invalid CORBA Interoperable Object Reference (IOR).
Cisco ONS15454 and ONS15327 running ONS before 3.4 allows attackers to cause a denial of service (reset to TCC, TCC+, TCCi or XTC) via a malformed HTTP request that does not contain a leading / (slash) character.
The design of the Hot Standby Routing Protocol (HSRP), as implemented on Cisco IOS 12.1, when using IRPAS, allows remote attackers to cause a denial of service (CPU consumption) via a router with the same IP address as the interface on which HSRP is running, which causes a loop.
Cisco Virtual Private Network (VPN) Client software 2.x.x and 3.x before 3.0.5 allows remote attackers to cause a denial of service (crash) via TCP packets with source and destination ports of 137 (NETBIOS).
Cisco VPN 3000 Concentrator 2.2.x, 3.6(Rel), and 3.x before 3.5.5, allows remote attackers to cause a denial of service via a long user name.
Memory leak in the Call Telephony Integration (CTI) Framework authentication for Cisco CallManager 3.0 and 3.1 before 3.1(3) allows remote attackers to cause a denial of service (crash and reload) via a series of authentication failures, e.g. via incorrect passwords.
Cisco VPN 3000 Concentrator before 2.5.2(F), with encryption enabled, allows remote attackers to cause a denial of service (reload) via a Windows-based PPTP client with the "No Encryption" option set.
Cisco DSL CPE devices running CBOS 2.4.4 and earlier allows remote attackers to cause a denial of service (hang or memory consumption) via (1) a large packet to the DHCP port, (2) a large packet to the Telnet port, or (3) a flood of large packets to the CPE, which causes the TCP/IP stack to consume large amounts of memory.
Cisco VPN 3000 Concentrator 2.2.x, 3.6(Rel), and 3.x before 3.5.5, allows remote attackers to cause a denial of service via (1) malformed or (2) large ISAKMP packets.
Buffer overflows in Cisco Virtual Private Network (VPN) Client 3.5.4 and earlier allows remote attackers to cause a denial of service via (1) an Internet Key Exchange (IKE) with a large Security Parameter Index (SPI) payload, or (2) an IKE packet with a large number of valid payloads.
Cisco Aironet before 11.21 with Telnet enabled allows remote attackers to cause a denial of service (reboot) via a series of login attempts with invalid usernames and passwords.
Cisco VPN 3000 Concentrator 2.2.x, and 3.x before 3.5.3, allows remote attackers to cause a denial of service (crash) via a long (1) username or (2) password to the HTML login interface.
The web management interface for Cisco Content Service Switch (CSS) 11000 switches allows remote attackers to cause a denial of service (soft reset) via (1) an HTTPS POST request, or (2) malformed XML data.
Web-based configuration utility in Cisco 600 series routers running CBOS 2.0.1 through 2.4.2ap binds itself to port 80 even when web-based configuration services are disabled, which could leave the router open to attack.
Cisco 600 series routers running CBOS 2.0.1 through 2.4.2ap allows remote attackers to cause a denial of service via multiple connections to the router on the (1) HTTP or (2) telnet service, which causes the router to become unresponsive and stop forwarding packets.
PPTP implementation in Cisco IOS 12.1 and 12.2 allows remote attackers to cause a denial of service (crash) via a malformed packet.
Cisco CBOS 2.3.8 and earlier allows remote attackers to cause a denial of service via an ICMP ECHO REQUEST (ping) with the IP Record Route option set.
CBOS 2.4.1 and earlier in Cisco 600 routers allows remote attackers to cause a denial of service via a slow stream of TCP SYN packets.
Cisco IOS 11.x and 12.x allows remote attackers to cause a denial of service by sending the ENVIRON option to the Telnet daemon before it is ready to accept it, which causes the system to reboot.
Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not handle the "fragment" keyword in a compiled ACL (Turbo ACL) for packets that are sent to the router, which allows remote attackers to cause a denial of service via a flood of fragments.
Cisco 600 routers running CBOS 2.4.1 and earlier allow remote attackers to cause a denial of service via a large ICMP echo (ping) packet.
Cisco CBOS 2.3.8 and earlier allows remote attackers to cause a denial of service via a series of large ICMP ECHO REPLY (ping) packets, which cause it to enter ROMMON mode and stop forwarding packets.
Cisco Catalyst 5000 series switches 6.1(2) and earlier will forward an 802.1x frame on a Spanning Tree Protocol (STP) blocked port, which causes a network storm and a denial of service.
Cisco IOS 12.1(2)T, 12.1(3)T allow remote attackers to cause a denial of service (reload) via a connection to TCP ports 3100-3999, 5100-5999, 7100-7999 and 10100-10999.
Cisco 12000 with IOS 12.0 and line cards based on Engine 2 and earlier allows remote attackers to cause a denial of service (CPU consumption) by flooding the router with traffic that generates a large number of ICMP Unreachable replies.
Multiple Cisco networking products allow remote attackers to cause a denial of service on the local network via a series of ARP packets sent to the router's interface that contains a different MAC address for the router, which eventually causes the router to overwrite the MAC address in its ARP table.
Cisco Catalyst 2900XL switch allows a remote attacker to create a denial of service via an empty UDP packet sent to port 161 (SNMP) when SNMP is disabled.
Cisco VPN 3000 series concentrators before 2.5.2(F) allow remote attackers to cause a denial of service via an IP packet with an invalid IP option.
Cisco Catalyst 6000, 5000, or 4000 switches allow remote attackers to cause a denial of service by connecting to the SSH service with a non-SSH client, which generates a protocol mismatch error.
Cisco Gigabit Switch Routers (GSR) with Fast Ethernet / Gigabit Ethernet cards, from IOS versions 11.2(15)GS1A up to 11.2(19)GS0.2 and some versions of 12.0, do not properly handle line card failures, which allows remote attackers to bypass ACLs or force the interface to stop forwarding packets.
The HTTP server in Cisco IOS 12.0 through 12.1 allows local users to cause a denial of service (crash and reload) via a URL containing a "?/" string.
Cisco devices running Application and Content Networking System (ACNS) 5.0 before 5.0.17.6 and 5.1 before 5.1.11.6 allow remote attackers to cause a denial of service (process restart) via a "crafted TCP connection."
Cisco Secure Access Control Server (ACS) 3.2, when configured as a Light Extensible Authentication Protocol (LEAP) RADIUS proxy, allows remote attackers to cause a denial of service (device crash) via certain LEAP authentication requests.
Cisco CNS Network Registrar Central Configuration Management (CCM) server 6.0 through 6.1.1.3 allows remote attackers to cause a denial of service (CPU consumption) by ending a connection after sending a certain sequence of packets.
A vulnerability in the authentication service of the Cisco Unified Communications Manager IM and Presence (Unified CM IM&P) Service, Cisco TelePresence Video Communication Server (VCS), and Cisco Expressway Series could allow an unauthenticated, remote attacker to cause a service outage for users attempting to authenticate, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient controls for specific memory operations. An attacker could exploit this vulnerability by sending a malformed Extensible Messaging and Presence Protocol (XMPP) authentication request to an affected system. A successful exploit could allow the attacker to cause an unexpected restart of the authentication service, preventing users from successfully authenticating. Exploitation of this vulnerability does not impact users who were authenticated prior to an attack.
A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 8800 Series could allow an unauthenticated, remote attacker to bypass authorization, access critical services, and cause a denial of service (DoS) condition. The vulnerability exists because the software fails to sanitize URLs before it handles requests. An attacker could exploit this vulnerability by submitting a crafted URL. A successful exploit could allow the attacker to gain unauthorized access to critical services and cause a DoS condition. This vulnerability affects Cisco IP Phone 8800 Series products running a SIP Software release prior to 11.0(5) for Wireless IP Phone 8821 and 8821-EX; and 12.5(1)SR1 for the IP Conference Phone 8832 and the rest of the IP Phone 8800 Series. Cisco IP Conference Phone 8831 is not affected.
HTML interface for Cisco VPN 3000 Concentrator 2.x.x and 3.x.x before 3.0.3(B) allows remote attackers to cause a denial of service (CPU consumption) via a long URL request.
Cisco IOS 11.x and 12.0 with ATM support allows attackers to cause a denial of service via the undocumented Interim Local Management Interface (ILMI) SNMP community string.
Cisco devices IOS 12.0 and earlier allow a remote attacker to cause a crash, or bad route updates, via malformed BGP updates with unrecognized transitive attribute.