The web management interface for Cisco Content Service Switch (CSS) 11000 switches allows remote attackers to cause a denial of service (soft reset) via (1) an HTTPS POST request, or (2) malformed XML data.

Unspecified vulnerability in the message-protocol implementation in the Mount service in IBM Tivoli Storage Manager (TSM) FastBack 5.x.x before 5.5.7, and 6.1.0.0, allows remote attackers to cause a denial of service (recovery failure), and possibly trigger loss of data, via unknown vectors.

The slapi_printmessage function in IBM Tivoli Directory Server (ITDS) before 6.0.0.8-TIV-ITDS-IF0006 allows remote attackers to cause a denial of service (daemon crash) via multiple incomplete DIGEST-MD5 connection attempts.

Cisco Virtual Private Network (VPN) Client 3.5.4 and earlier allows remote attackers to cause a denial of service (CPU consumption) via a packet with a zero-length payload.

Buffer overflows in Cisco Virtual Private Network (VPN) Client 3.5.4 and earlier allows remote attackers to cause a denial of service via (1) an Internet Key Exchange (IKE) with a large Security Parameter Index (SPI) payload, or (2) an IKE packet with a large number of valid payloads.

Cisco 600 series routers running CBOS 2.0.1 through 2.4.2ap allows remote attackers to cause a denial of service via multiple connections to the router on the (1) HTTP or (2) telnet service, which causes the router to become unresponsive and stop forwarding packets.

Cisco routers and switches running IOS 12.0 through 12.2.1 allows a remote attacker to cause a denial of service via a flood of UDP packets.

AIX SNMP server snmpd allows remote attackers to cause a denial of service via a RST during the TCP connection.

Cisco IOS 12.2 and earlier running Cisco Discovery Protocol (CDP) allows remote attackers to cause a denial of service (memory consumption) via a flood of CDP neighbor announcements.

Cisco CBOS 2.3.8 and earlier allows remote attackers to cause a denial of service via an ICMP ECHO REQUEST (ping) with the IP Record Route option set.

Web-based configuration utility in Cisco 600 series routers running CBOS 2.0.1 through 2.4.2ap binds itself to port 80 even when web-based configuration services are disabled, which could leave the router open to attack.

WebSeal in IBM Tivoli SecureWay Policy Director 3.8 allows remote attackers to cause a denial of service (crash) via a URL that ends in %2e.

Cisco Catalyst 5000 series switches 6.1(2) and earlier will forward an 802.1x frame on a Spanning Tree Protocol (STP) blocked port, which causes a network storm and a denial of service.

Hursley Software Laboratories Consumer Transaction Framework (HSLCTF) HTTP object allows remote attackers to cause a denial of service (crash) via an extremely long HTTP request.

Cisco CBOS 2.3.8 and earlier allows remote attackers to cause a denial of service via a series of large ICMP ECHO REPLY (ping) packets, which cause it to enter ROMMON mode and stop forwarding packets.

Cisco VPN 3000 series concentrators before 2.5.2(F) allow remote attackers to cause a denial of service via an IP packet with an invalid IP option.

Cisco IOS 11.x and 12.0 with ATM support allows attackers to cause a denial of service via the undocumented Interim Local Management Interface (ILMI) SNMP community string.

Multiple Cisco networking products allow remote attackers to cause a denial of service on the local network via a series of ARP packets sent to the router's interface that contains a different MAC address for the router, which eventually causes the router to overwrite the MAC address in its ARP table.

Cisco IOS 12.1(2)T, 12.1(3)T allow remote attackers to cause a denial of service (reload) via a connection to TCP ports 3100-3999, 5100-5999, 7100-7999 and 10100-10999.

Cisco devices IOS 12.0 and earlier allow a remote attacker to cause a crash, or bad route updates, via malformed BGP updates with unrecognized transitive attribute.

Cisco 600 routers running CBOS 2.4.1 and earlier allow remote attackers to cause a denial of service via a large ICMP echo (ping) packet.

IBM Websphere/NetCommerce3 3.1.2 allows remote attackers to cause a denial of service by directly calling the macro.d2w macro with a long string of %0a characters.

The web administration interface for IBM AS/400 Firewall allows remote attackers to cause a denial of service via an empty GET request.

Cisco Gigabit Switch Routers (GSR) with Fast Ethernet / Gigabit Ethernet cards, from IOS versions 11.2(15)GS1A up to 11.2(19)GS0.2 and some versions of 12.0, do not properly handle line card failures, which allows remote attackers to bypass ACLs or force the interface to stop forwarding packets.

CBOS 2.4.1 and earlier in Cisco 600 routers allows remote attackers to cause a denial of service via a slow stream of TCP SYN packets.

The HTTP server in Cisco IOS 12.0 through 12.1 allows local users to cause a denial of service (crash and reload) via a URL containing a "?/" string.

The IBM WebSphere DataPower XML Accelerator XA35, Low Latency Appliance XM70, Integration Appliance XI50, B2B Appliance XB60, and XML Security Gateway XS40 SOA Appliances before 3.8.0.0, when a QLOGIC Ethernet interface is used, allow remote attackers to cause a denial of service (interface outage) via malformed ICMP packets to the 0.0.0.0 destination IP address.

The eDocument Conversion Actions implementation in IBM Datacap Taskmaster Capture 8.0.1 FP1 and earlier allows remote attackers to cause a denial of service (batch abort) via a long subject line in an e-mail message that is represented in a .eml file.

The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle (1) a loop between a dot1x enabled port and an open-authentication dot1x enabled port and (2) a loop between a dot1x enabled port and a non-dot1x port, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many Spanning Tree Protocol (STP) Bridge Protocol Data Unit (BPDU) frames, aka Bug ID CSCtq36327.

IBM/Tivoli OPC Tracker Agent version 2 release 1 allows remote attackers to cause a denial of service (resource exhaustion) via malformed data to the localtracker client port (5011), which prevents the connection from being closed properly.

The IBM BladeCenter with Advanced Management Module (AMM) firmware before bpet50g does not properly perform interrupt sharing for USB and iSCSI, which allows remote attackers to cause a denial of service (management module reboot) via TCP packets with malformed application data.

Buffer overflow in Cisco TACACS+ tac_plus server allows remote attackers to cause a denial of service via a malformed packet with a long length field.

The Cisco IronPort Email Security Appliance (ESA) allows remote attackers to cause a denial of service (CPU consumption) via long Subject headers in e-mail messages, aka Bug ID CSCzv93864.

Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.

Denial of service in Cisco IOS web server allows attackers to reboot the router using a long URL.

The HTTP Channel in IBM WebSphere Application Server (WAS) 7.0 before 7.0.0.11 allows remote attackers to cause a denial of service (NullPointerException) via a large amount of chunked data that uses gzip compression.

Jolt ICMP attack causes a denial of service in Windows 95 and Windows NT systems.

ICMP messages to broadcast addresses are allowed, allowing for a Smurf attack that can cause a denial of service.

Buffer overflow in Cisco 7xx routers through the telnet service.

Denial of service in Cisco routers running NAT via a PORT command from an FTP client to a Telnet port.

The broker application in IBM BigFix Remote Control before 9.1.3 allows remote attackers to cause a denial of service via an invalid HTTP request.

Vulnerability in Cisco 7xx series routers allows a remote attacker to cause a system reload via a TCP connection to the router's TELNET port.

Cisco Catalyst LAN switches running Catalyst 5000 supervisor software allows remote attackers to perform a denial of service by forcing the supervisor module to reload.

Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.0 before 7.0(8.10), 7.2 before 7.2(4.45), 8.0 before 8.0(5.1), 8.1 before 8.1(2.37), and 8.2 before 8.2(1.15); and Cisco PIX 500 Series Security Appliance; allows remote attackers to cause a denial of service (active IPsec tunnel loss and prevention of new tunnels) via a malformed IKE message through an existing tunnel to UDP port 4500, aka Bug ID CSCtc47782.

An attacker can write to syslog files from any location, causing a denial of service by filling up the logs, and hiding activities.

Buffer overflow in Lotus Notes LDAP (NLDAP) allows an attacker to conduct a denial of service through the ldap_search request.

Denial of service when an attacker sends many SYN packets to create multiple connections without ever sending an ACK to complete the connection, aka SYN flood.

Oversized ICMP ping packets can result in a denial of service, aka Ping o' Death.