A vulnerability was determined in D-Link DIR-822 A_101. The impacted element is the function system of the file /udhcpcd/dhcpd.c of the component udhcpd DHCP Service. This manipulation of the argument Hostname causes command injection. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DSL-504T allows remote attackers to bypass authentication and gain privileges, such as upgrade firmware, restart the router or restore a saved configuration, via a direct request to firmwarecfg.

D-Link DSL-502T, DSL-504T, DSL-562T, and DSL-G604T, when /cgi-bin/firmwarecfg is executed, allows remote attackers to bypass authentication (1) if their IP address already exists in /var/tmp/fw_ip or (2) if their request is the first, which causes /var/tmp/fw_ip to be created and contain their IP address.

A security vulnerability has been detected in D-Link DIR-823G 1.0.2B05. The affected element is the function GetDDNSSettings/GetDeviceDomainName/GetDeviceSettings/GetDMZSettings/GetFirewallSettings/GetGuestNetworkSettings/GetLanWanConflictInfo/GetLocalMacAddress/GetNetworkSettings/GetQoSSettings/GetRouterInformationSettings/GetRouterLanSettings/GetWanSettings/SetAccessCtlList/SetAccessCtlSwitch/SetDeviceSettings/SetGuestWLanSettings/SetIPv4FirewallSettings/SetNetworkSettings/SetNetworkTomographySettings/SetNTPServerSettings/SetRouterLanSettings/SetStaticClientInfo/SetStaticRouteSettings/SetWLanRadioSecurity/SetWPSSettings/UpdateClientInfo of the component goahead. Such manipulation leads to improper access controls. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was determined in D-Link DIR-820LW 2.03. Affected is the function ssdpcgi_main of the component SSDP. Executing a manipulation can lead to os command injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was detected in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. The impacted element is the function cgi_set_wto of the file /cgi-bin/system_mgr.cgi. Performing a manipulation results in improper access controls. Remote exploitation of the attack is possible. The exploit is now public and may be used.

A vulnerability was identified in D-Link DIR-816 1.10CNB05. The impacted element is an unknown function of the file redirect.asp of the component goahead. The manipulation of the argument token_id leads to improper access controls. The attack may be initiated remotely. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DSL-504T stores usernames and passwords in cleartext in the router configuration file, which allows remote attackers to obtain sensitive information.

A vulnerability, which was classified as critical, has been found in D-Link DAP-1562 1.10. Affected by this issue is the function http_request_parse of the component HTTP Header Handler. The manipulation of the argument Authorization leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-645 v1.03 was discovered to contain a command injection vulnerability via the QUERY_STRING parameter at __ajax_explorer.sgi.

D-Link DCS-900 Internet Camera listens on UDP port 62976 for an IP address, which allows remote attackers to change the IP address of the camera via a UDP broadcast packet.

D-Link DSL-G2452DG HW:T1\\tFW:ME_2.00 was discovered to contain insecure permissions.

D-Link DWL-900AP+ Access Point 2.1 and 2.2 allows remote attackers to access the TFTP server without authentication and read the config.img file, which contains sensitive information such as the administrative password, the WEP encryption keys, and network configuration information.

D-Link DIR-820L 1.05B03 was discovered to contain remote command execution (RCE) vulnerability via HTTP POST to get set ccp.

D-Link DIR-816 A2 1.10 B05 devices allow arbitrary remote code execution without authentication via the newpass parameter. In the /goform/form2userconfig.cgi handler function, a long password may lead to a stack-based buffer overflow and overwrite a return address.

On D-Link DIR-823G devices, ExportSettings.sh, upload_settings.cgi, GetDownLoadSyslog.sh, and upload_firmware.cgi do not require authentication, which allows remote attackers to execute arbitrary code.

On D-Link DIR-550A and DIR-604M devices through v2.10KR, a malicious user can use a default TELNET account to get unauthorized access to vulnerable devices, aka a backdoor access vulnerability.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function msp_info.htm. This vulnerability allows attackers to execute arbitrary commands via the cmd parameter.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetStaticRouteSettings. This vulnerability allows attackers to execute arbitrary commands via the staticroute_list parameter.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function urlrd_opt.asp. This vulnerability allows attackers to execute arbitrary commands via the url_en parameter.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function usb_paswd.asp. This vulnerability allows attackers to execute arbitrary commands via the name parameter.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetNetworkTomographySettings. This vulnerability allows attackers to execute arbitrary commands via the tomography_ping_address, tomography_ping_number, tomography_ping_size, tomography_ping_timeout, and tomography_ping_ttl parameters.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetStationSettings. This vulnerability allows attackers to execute arbitrary commands via the station_access_enable parameter.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetWLanACLSettings. This vulnerability allows attackers to execute arbitrary commands via the wl(0).(0)_maclist parameter.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetWLanApcliSettings. This vulnerability allows attackers to execute arbitrary commands via the ApCliKeyStr parameter.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function upgrade_filter. This vulnerability allows attackers to execute arbitrary commands via the path and time parameters.

D-Link device DIR_882 DIR_882_FW1.30B06_Hotfix_02 was discovered to contain a command injection vulnerability in the LocalIPAddress parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted HNAP1 POST request.

D-Link DGS-1500 Ax devices before 2.51B021 have a hardcoded password, which allows remote attackers to obtain shell access.

Certain D-Link products are affected by: Buffer Overflow. This affects DIR-880L 1.08B04 and DIR-895 L/R 1.13b03. The impact is: execute arbitrary code (remote). The component is: htdocs/fileaccess.cgi. The attack vector is: A crafted HTTP request handled by fileacces.cgi could allow an attacker to mount a ROP attack: if the HTTP header field CONTENT_TYPE starts with ''boundary=' followed by more than 256 characters, a buffer overflow would be triggered, potentially causing code execution.

D-Link DIR-645 1.03 A1 is vulnerable to Buffer Overflow. The hnap_main function in the cgibin handler uses sprintf to format the soapaction header onto the stack and has no limit on the size.

register_send.php on D-Link DIR-850L REV. B (with firmware through FW208WWb02) devices does not require authentication, which can result in unintended enrollment in mydlink Cloud Services.

A command injection vulnerability was discovered in the HNAP1 protocol in D-Link DIR-823G devices with firmware V1.0.2B05. An attacker is able to execute arbitrary web scripts via shell metacharacters in the PrivateLogin field to Login.

A command injection vulnerability was discovered in the HNAP1 protocol in D-Link DIR-823G devices with firmware V1.0.2B05. An attacker is able to execute arbitrary web scripts via shell metacharacters in the Captcha field to Login.

D-Link DNS-320 FW v2.06B01 Revision Ax is affected by command injection in the system_mgr.cgi component, which can lead to remote arbitrary code execution.

The D-Link DSR-250 (3.14) DSR-1000N (2.11B201) UPnP service contains a command injection vulnerability, which can cause remote command execution.

A vulnerability was identified in D-Link DIR-852 1.00. This issue affects some unknown processing of the file /gena.cgi. Such manipulation of the argument service leads to command injection. The attack can be executed remotely. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.

The D-Link DIR-685 router, when certain WPA and WPA2 configurations are used, does not maintain an encrypted wireless network during transfer of a large amount of network traffic, which allows remote attackers to obtain sensitive information or bypass authentication via a Wi-Fi device.

A vulnerability has been found in D-Link DHP-W310AV 1.04 and classified as critical. This vulnerability affects unknown code. The manipulation leads to authentication bypass by spoofing. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

An issue was discovered on D-Link DIR-816L devices 2.x before 1.10b04Beta02. Universal Plug and Play (UPnP) is enabled by default on port 1900. An attacker can perform command injection by injecting a payload into the Search Target (ST) field of the SSDP M-SEARCH discover packet.

A weakness has been identified in D-Link DIR-823X 250416. Affected by this issue is the function sub_412E7C of the file /goform/set_wifidog_settings. Executing a manipulation of the argument wd_enable can lead to command injection. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks.

An issue was discovered in apply.cgi on D-Link DAP-1520 devices before 1.10b04Beta02. Whenever a user performs a login action from the web interface, the request values are being forwarded to the ssi binary. On the login page, the web interface restricts the password input field to a fixed length of 15 characters. The problem is that validation is being done on the client side, hence it can be bypassed. When an attacker manages to intercept the login request (POST based) and tampers with the vulnerable parameter (log_pass), to a larger length, the request will be forwarded to the webserver. This results in a stack-based buffer overflow. A few other POST variables, (transferred as part of the login request) are also vulnerable: html_response_page and log_user.

A vulnerability was determined in D-Link DIR-823X up to 250416. Affected by this vulnerability is the function sub_415028 of the file /goform/set_static_leases. Executing manipulation of the argument Hostname can lead to command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

A security vulnerability has been detected in D-Link DIR-852 1.00CN B09. Impacted is the function soapcgi_main of the file soap.cgi of the component SOAP Service. Such manipulation of the argument service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue in the getcfg.php component of D-Link DIR816L_FW206b01 allows attackers to access the device via a crafted payload.

A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-615 before v20.12PTb04 has a second admin account with a 0x1 BACKDOOR value, which might allow remote attackers to obtain access via a TELNET connection.

An issue was discovered on D-Link DIR-878 1.12B01 devices. At the /HNAP1 URI, an attacker can log in with a blank password.