Buffer overflow in decode.cpp in Cisco OpenH264 1.2.0 and earlier allows remote attackers to execute arbitrary code via an encoded media file.

Use-after-free vulnerability in decode_slice.cpp in Cisco OpenH264 1.2.0 and earlier allows remote attackers to execute arbitrary code via an encoded media file.

Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could allow the attacker to execute arbitrary code or cause a DoS condition on the device. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69962, CSCve02808, CSCve02810, CSCve02812, CSCve02819, CSCve02822, CSCve02831, CSCve04859.

A vulnerability in the Cisco Fabric Services (CFS) component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could allow the attacker to execute arbitrary code on the device. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69943, CSCve02429, CSCve02433, CSCve02435, CSCve02445, CSCve04859.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. The vulnerability exists because the affected software insufficiently validates header values in Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code or cause a DoS condition. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69954, CSCve02463, CSCve02785, CSCve02787, CSCve02804, CSCve04859.

A vulnerability in the Session Description Protocol (SDP) parser of Cisco Meeting Server could allow an unauthenticated, remote attacker to execute arbitrary code on an affected system. This vulnerability affects the following products: Cisco Meeting Server releases prior to Release 2.0.3, Acano Server releases 1.9.x prior to Release 1.9.5, Acano Server releases 1.8.x prior to Release 1.8.17. More Information: CSCva76004. Known Affected Releases: 1.8.x 1.92.0.

A vulnerability in Cisco Meeting Server and Meeting App could allow an unauthenticated, remote attacker to execute arbitrary code on an affected system. This vulnerability affects the following products: Cisco Meeting Server releases prior to 2.0.1, Acano Server releases prior to 1.8.16 and prior to 1.9.3, Cisco Meeting App releases prior to 1.9.8, Acano Meeting Apps releases prior to 1.8.35. More Information: CSCva75942 CSCvb67878. Known Affected Releases: 1.81.92.0.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

The UPnP IGD implementation on the Cisco Linksys WRT54GX with firmware 2.00.05, when UPnP is enabled, configures the SOAP server to listen on the WAN port, which allows remote attackers to administer the firewall via SOAP requests.

Format string vulnerability in the administration function in Cisco Secure Access Control Server (ACS) for Windows, 2.6.x and earlier and 3.x through 3.01 (build 40), allows remote attackers to crash the CSADMIN module only (denial of service of administration function) or execute arbitrary code via format strings in the URL to port 2002.

The original patch for the Cisco Content Service Switch 11000 Series authentication bypass vulnerability (CVE-2001-0622) was incomplete, which still allows remote attackers to gain additional privileges by directly requesting the web management URL instead of navigating through the interface, possibly via a variant of the original attack, as identified by Cisco bug ID CSCdw08549.

Cisco IOS Firewall Feature set, aka Context Based Access Control (CBAC) or Cisco Secure Integrated Software, for IOS 11.2P through 12.2T does not properly check the IP protocol type, which could allow remote attackers to bypass access control lists.

RSA BSAFE SSL-J 3.0, 3.0.1 and 3.1, as used in Cisco iCND 2.0, caches session IDs from failed login attempts, which could allow remote attackers to bypass SSL client authentication and gain access to sensitive data by logging in after an initial failure.

Cisco 6400 Access Concentrator Node Route Processor 2 (NRP2) 12.1DC card does not properly disable access when a password has not been set for vtys, which allows remote attackers to obtain access via telnet.

Cisco 12000 with IOS 12.0 and lines card based on Engine 2 does not properly handle an outbound ACL when an input ACL is not configured on all the interfaces of a multi port line card, which could allow remote attackers to bypass the intended access controls.

Cisco Aironet 340 Series wireless bridge before 8.55 does not properly disable access to the web interface, which allows remote attackers to modify its configuration.

The web management service on Cisco Content Service series 11000 switches (CSS) before WebNS 4.01B29s or WebNS 4.10B17s allows a remote attacker to gain additional privileges by directly requesting the web management URL instead of navigating through the interface.

Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not support the "fragment" keyword in an outgoing ACL, which could allow fragmented packets in violation of the intended access.

Cisco CBOS 2.3.8 and earlier stores the passwords for (1) exec and (2) enable in cleartext in the NVRAM and a configuration file, which could allow unauthorized users to obtain the passwords and gain privileges.

Various Intrusion Detection Systems (IDS) including (1) Cisco Secure Intrusion Detection System, (2) Cisco Catalyst 6000 Intrusion Detection System Module, (3) Dragon Sensor 4.x, (4) Snort before 1.8.1, (5) ISS RealSecure Network Sensor 5.x and 6.x before XPU 3.2, and (6) ISS RealSecure Server Sensor 5.5 and 6.0 for Windows, allow remote attackers to evade detection of HTTP attacks via non-standard "%u" Unicode encoding of ASCII characters in the requested URL.

Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not properly handle the implicit "deny ip any any" rule in an outgoing ACL when the ACL contains exactly 448 entries, which can allow some outgoing packets to bypass access restrictions.

The Cisco Content Services Switch (CSS) 11500 with software 8.20.4.02 and the Application Control Engine (ACE) 4710 with software A2(3.0) do not properly handle LF header terminators in situations where the GET line is terminated by CRLF, which allows remote attackers to conduct HTTP request smuggling attacks and possibly bypass intended header insertions via crafted header data, as demonstrated by an LF character between the ClientCert-Subject and ClientCert-Subject-CN headers. NOTE: this vulnerability exists because of an incomplete fix for CVE-2010-1576.

Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not properly filter does not properly filter packet fragments even when the "fragment" keyword is used in an ACL, which allows remote attackers to bypass the intended access controls.

Cisco Virtual Central Office 4000 (VCO/4K) uses weak encryption to store usernames and passwords in the SNMP MIB, which allows an attacker who knows the community name to crack the password and gain privileges.

CiscoSecure ACS Server 2.4(2) and earlier allows remote attackers to bypass LDAP authentication on the server if the LDAP server allows null passwords.

By design, the "established" command on the Cisco PIX firewall allows connections from one host to arbitrary ports of a target host if an alternative conduit has already been allowed, which can cause administrators to configure less restrictive access controls than intended if they do not understand this functionality.

Cisco routers 9.17 and earlier allow remote attackers to bypass security restrictions via certain IP source routed packets that should normally be denied using the "no ip source-route" command.

Vulnerability in Cisco IOS 11.1 through 11.3 with distributed fast switching (DFS) enabled allows remote attackers to bypass certain access control lists when the router switches traffic from a DFS-enabled input interface to an output interface with a logical subinterface, as described by Cisco bug CSCdk43862.

Vulnerability in Cisco routers versions 8.2 through 9.1 allows remote attackers to bypass access control lists when extended IP access lists are used on certain interfaces, the IP route cache is enabled, and the access list uses the "established" keyword.

Cisco Show and Share 5(2), 5.2(1), and 5.2(2) before 5.2(2.1) allows remote attackers to access the (1) Encoders and Pull Configurations, (2) Push Configurations, (3) Video Encoding Formats, and (4) Transcoding administration pages, and cause a denial of service (live event outage) or obtain potentially sensitive information, via unspecified vectors, aka Bug ID CSCto73758.

Vulnerability in Cisco IOS 11.1CC and 11.1CT with distributed fast switching (DFS) enabled allows remote attackers to bypass certain access control lists when the router switches traffic from a DFS-enabled interface to an interface that does not have DFS enabled, as described by Cisco bug CSCdk35564.

The Cisco Content Services Switch (CSS) 11500 with software 08.20.1.01 conveys authentication data through ClientCert-* headers but does not delete client-supplied ClientCert-* headers, which might allow remote attackers to bypass authentication via crafted header data, as demonstrated by a ClientCert-Subject-CN header, aka Bug ID CSCsz04690.

Check Point Firewall-1 allows remote attackers to bypass port access restrictions on an FTP server by forcing it to send malicious packets that Firewall-1 misinterprets as a valid 227 response to a client's PASV attempt.

Cisco 675 routers running CBOS allow remote attackers to establish telnet sessions if an exec or superuser password has not been set.

The HTTP server in Cisco 7xx series routers 3.2 through 4.2 is enabled by default, which allows remote attackers to change the router's configuration.

Some classic Cisco IOS devices have a vulnerability in the PPP CHAP authentication to establish unauthorized PPP connections.

In Cisco IOS 10.3, with the tacacs-ds or tacacs keyword, an extended IP access control list could bypass filtering.

A default configuration of CiscoSecure Access Control Server (ACS) allows remote users to modify the server database without authentication.

Cisco TelePresence Recording Server devices with software 1.6.x do not require authentication for an XML-RPC interface, which allows remote attackers to perform unspecified actions via a session on TCP port 8080, aka Bug ID CSCtg35833.

Cisco TelePresence Manager 1.2.x through 1.6.x allows remote attackers to bypass authentication and invoke arbitrary methods via a malformed SOAP request, aka Bug ID CSCtc59562.

Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) permit packets to pass before the configuration has been loaded, which might allow remote attackers to bypass intended access restrictions by sending network traffic during device startup, aka Bug ID CSCsy86769.

Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) allows remote attackers to bypass SMTP inspection via vectors involving a prepended space character, aka Bug ID CSCte14901.

Cisco Firepower System Software 6.0.0 through 6.1.0 has a hardcoded account, which allows remote attackers to obtain CLI access by leveraging knowledge of the password, aka Bug ID CSCuz56238.

Cisco Prime Network Analysis Module (NAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) and Prime Virtual Network Analysis Module (vNAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) allow remote attackers to execute arbitrary OS commands via a crafted HTTP request, aka Bug ID CSCuy21882.

Cisco Unified Computing System (UCS) Central Software 1.3(1b) and earlier allows remote attackers to execute arbitrary OS commands via a crafted HTTP request, aka Bug ID CSCuv33856.

The Cisco Content Services Switch (CSS) 11500 with software before 8.20.4.02 and the Application Control Engine (ACE) 4710 with software before A2(3.0) do not properly handle use of LF, CR, and LFCR as alternatives to the standard CRLF sequence between HTTP headers, which allows remote attackers to bypass intended header insertions or conduct HTTP request smuggling attacks via crafted header data, as demonstrated by LF characters preceding ClientCert-Subject and ClientCert-Subject-CN headers, aka Bug ID CSCta04885.