An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides UPnP services that are available on port 3480 and can also be accessed via port 80 using the url "/port_3480". It seems that the UPnP services provide "request_image" as one of the service actions for a normal user to retrieve an image from a camera that is controlled by the controller. It seems that the "res" (resolution) parameter passed in the query string is not sanitized and is stored on the stack which allows an attacker to overflow the buffer. The function "LU::Generic_IP_Camera_Manager::REQ_Image" is activated when the lu_request_image is passed as the "id" parameter in the query string. This function then calls "LU::Generic_IP_Camera_Manager::GetUrlFromArguments". This function retrieves all the parameters passed in the query string including "res" and then uses the value passed in it to fill up buffer using the sprintf function. However, the function in this case lacks a simple length check and as a result an attacker who is able to send more than 184 characters can easily overflow the values stored on the stack including the $RA value and thus execute code on the device.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides UPnP services that are available on port 3480 and can also be accessed via port 80 using the url "/port_3480". It seems that the UPnP services provide "request_image" as one of the service actions for a normal user to retrieve an image from a camera that is controlled by the controller. It seems that the "URL" parameter passed in the query string is not sanitized and is stored on the stack which allows an attacker to overflow the buffer. The function "LU::Generic_IP_Camera_Manager::REQ_Image" is activated when the lu_request_image is passed as the "id" parameter in query string. This function then calls "LU::Generic_IP_Camera_Manager::GetUrlFromArguments" and passes a "pointer" to the function where it will be allowed to store the value from the URL parameter. This pointer is passed as the second parameter $a2 to the function "LU::Generic_IP_Camera_Manager::GetUrlFromArguments". However, neither the callee or the caller in this case performs a simple length check and as a result an attacker who is able to send more than 1336 characters can easily overflow the values stored on the stack including the $RA value and thus execute code on the device.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability has been found in Linksys E1700 1.0.0.4.003. Affected by this issue is the function setSysAdm of the file /goform/setSysAdm. Such manipulation of the argument rm_port leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Linksys E1700 1.0.0.4.003. Affected by this vulnerability is the function setWan of the file /goform/setWan. This manipulation of the argument DeviceName/lanIp causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys E1700 1.0.0.4.003. This affects the function QoSSetup of the file /goform/QoSSetup. Performing manipulation of the argument ack_policy results in stack-based buffer overflow. The attack may be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

Buffer overflow in the glob implementation (glob.c) in libc in NetBSD-current before 20050914, NetBSD 2.* and 3.* before 20061203, and Apple Mac OS X before 2007-004, as used by the FTP daemon and tnftpd, allows remote authenticated users to execute arbitrary code via a long pathname that results from path expansion.

A buffer overflow vulnerability in "Add command" functionality exists in Flexense SyncBreeze Enterprise <= 10.3.14. The vulnerability can be triggered by an authenticated attacker who submits more than 5000 characters as the command name. It will cause termination of the SyncBreeze Enterprise server and possibly remote command execution with SYSTEM privilege.

Buffer overflow in logout.cgi in the Intelligent Platform Management Interface (IPMI) with firmware before 3.15 (SMT_X9_315) on Supermicro X9 generation motherboards allows remote authenticated users to execute arbitrary code via the SID parameter.

Buffer overflow in the SNMP implementation in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(5) and 6.x before 6.1(1) and MDS 9000 devices 4.x and 5.x before 5.2(5) allows remote authenticated users to execute arbitrary code via a crafted SNMP request, aka Bug ID CSCtx54822.

Multiple buffer overflows in FlashFXP.exe in FlashFXP 4.2 allow remote authenticated users to execute arbitrary code via a long unicode string to (1) TListbox or (2) TComboBox.

On Insteon Hub 2245-222 devices with firmware version 1012, specially crafted replies received from the PubNub service can cause buffer overflows on a global section overwriting arbitrary data. An attacker should impersonate PubNub and answer an HTTPS GET request to trigger this vulnerability. A strcpy overflows the buffer insteon_pubnub.channel_ad_r, which has a size of 16 bytes. An attacker can send an arbitrarily long "ad_r" parameter in order to exploit this vulnerability.

Multiple buffer overflows in (a) UltraVNC (aka Ultr@VNC) 1.0.1 and earlier and (b) tabbed_viewer 1.29 (1) allow user-assisted remote attackers to execute arbitrary code via a malicious server that sends a long string to a client that connects on TCP port 5900, which triggers an overflow in Log::ReallyPrint; and (2) allow remote attackers to cause a denial of service (server crash) via a long HTTP GET request to TCP port 5800, which triggers an overflow in VNCLog::ReallyPrint.

Stack-based buffer overflow in IBM Informix Dynamic Server (IDS) 11.50 before 11.50.xC9W2 and 11.70 before 11.70.xC5 allows remote authenticated users to execute arbitrary code via crafted arguments in a SET COLLATION statement.

The VMX process in VMware ESXi 3.5 through 4.1 and ESX 3.5 through 4.1 does not properly handle RPC commands, which allows guest OS users to cause a denial of service (memory overwrite and process crash) or possibly execute arbitrary code on the host OS via vectors involving data pointers.

On Insteon Hub 2245-222 devices with firmware version 1012, specially crafted replies received from the PubNub service can cause buffer overflows on a global section overwriting arbitrary data. An attacker should impersonate PubNub and answer an HTTPS GET request to trigger this vulnerability. A strcpy overflows the buffer insteon_pubnub.channel_ak, which has a size of 16 bytes. An attacker can send an arbitrarily long "ak" parameter in order to exploit this vulnerability.

Stack-based buffer overflow in Oracle 9i and 10g allows remote attackers to execute arbitrary code via a long token in the text of a wrapped procedure.

Buffer overflow in the cuil component in Cisco Telepresence System Integrator C Series 4.x before TC4.2.0 allows remote authenticated users to cause a denial of service (endpoint reboot or process crash) or possibly execute arbitrary code via a long location parameter to the getxml program, aka Bug ID CSCtq46496.

Stack-based buffer overflow in lcfd.exe in Tivoli Endpoint in IBM Tivoli Management Framework 3.7.1, 4.1, 4.1.1, and 4.3.1 allows remote authenticated users to execute arbitrary code via a long opts field.

Multiple stack-based buffer overflows in TP-Link WR940N WiFi routers with hardware version 4 allow remote authenticated users to execute arbitrary code via the (1) ping_addr parameter to PingIframeRpm.htm or (2) dnsserver2 parameter to WanStaticIpV6CfgRpm.htm.

Multiple buffer overflows in Oracle 9i Database release 2, Release 1, 8i, 8.1.7, and 8.0.6 allow remote attackers to execute arbitrary code via (1) a long conversion string argument to the TO_TIMESTAMP_TZ function, (2) a long time zone argument to the TZ_OFFSET function, or (3) a long DIRECTORY parameter to the BFILENAME function.

Stack-based buffer overflow in Oracle Net Services for Oracle Database Server 9i release 2 and earlier allows attackers to execute arbitrary code via a "CREATE DATABASE LINK" query containing a connect string with a long USING parameter.

Stack-based buffer overflow in NWFTPD.NLM before 5.10.02 in the FTP server in Novell NetWare allows remote authenticated users to execute arbitrary code or cause a denial of service (abend) via a long DELE command, a different vulnerability than CVE-2010-0625.4.

Stack-based buffer overflow in an unspecified logging function in oninit.exe in IBM Informix Dynamic Server (IDS) 11.10 before 11.10.xC2W2 and 11.50 before 11.50.xC1 allows remote authenticated users to execute arbitrary code via a crafted EXPLAIN directive, aka idsdb00154125 and idsdb00154243.

Stack-based buffer overflow in the IMAP server component in GroupWise Internet Agent (GWIA) in Novell GroupWise 7.x before 7.0 post-SP4 FTF and 8.x before 8.0 SP2 allows remote attackers to execute arbitrary code via a long mailbox name in a CREATE command.

Multiple stack-based buffer overflows in the jclient._Java_novell_jclient_JClient_defineClass@20 function in jclient.dll in the Tomcat web server in Novell iManager 2.7, 2.7.3, and 2.7.3 FTF2 allow remote authenticated users to execute arbitrary code via the (1) EnteredClassID or (2) NewClassName parameter to nps/servlet/webacc.

Heap-based buffer overflow in the Local Security Authority Subsystem Service (LSASS), as used in Active Directory in Microsoft Windows Server 2003 SP2 and Windows Server 2008 Gold, SP2, and R2; Active Directory Application Mode (ADAM) in Windows XP SP2 and SP3 and Windows Server 2003 SP2; and Active Directory Lightweight Directory Service (AD LDS) in Windows Vista SP2, Windows Server 2008 Gold, SP2, and R2, and Windows 7, allows remote authenticated users to execute arbitrary code via malformed LDAP messages, aka "LSASS Heap Overflow Vulnerability."

Stack-based buffer overflow in the dhost module in Novell eDirectory 8.8 SP5 for Windows allows remote authenticated users to execute arbitrary code via long sadminpwd and verifypwd parameters in a submit action to /dhost/httpstk.

Stack-based buffer overflow in the dhost module in Novell eDirectory 8.8 SP5 for Windows allows remote authenticated users to cause a denial of service (dhost.exe crash) and possibly execute arbitrary code via a long string to /dhost/modules?I:.

Stack-based buffer overflow in the File System Manager for EMC DiskXtender 6.20.060 allows remote authenticated users to execute arbitrary code via a crafted request to the RPC interface.

Stack-based buffer overflow in the IMAP service in NetWin SurgeMail 38k4-4 and earlier allows remote authenticated users to execute arbitrary code via long arguments to the LSUB command.

Buffer overflow in Ipswitch WS_FTP Server with SSH 6.1.0.0 allows remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via a long opendir command.

A vulnerability was found in Tenda AC8 16.03.34.09 and classified as critical. Affected by this issue is the function route_static_check of the file /goform/SetStaticRouteCfg. The manipulation of the argument list leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been declared as critical. This vulnerability affects the function formSetPortTr of the file /goform/formSetPortTr. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been classified as critical. This affects the function formResetStatistic of the file /goform/formResetStatistic. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in Tenda AC10 16.03.10.13. Affected by this vulnerability is the function FUN_0044db3c of the file /goform/fast_setting_wifi_set. The manipulation of the argument timeZone leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in Tenda AC10 16.03.10.13. Affected is the function FUN_0046AC38 of the file /goform/WifiExtraSet. The manipulation of the argument wpapsk_crypto leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Buffer overflow in OpenBase 10.0.5 and earlier might allow remote authenticated users to execute arbitrary code or cause a denial of service (daemon crash) by creating a stored procedure with a long name and invoking this procedure, which triggers heap corruption.

Buffer overflow in IMAP service in MDaemon 6.7.5 and earlier allows remote authenticated users to cause a denial of service (crash) and execute arbitrary code via a CREATE command with a long mailbox name.

In FreeBSD 12.1-STABLE before r357490, 12.1-RELEASE before 12.1-RELEASE-p3, 11.3-STABLE before r357489, and 11.3-RELEASE before 11.3-RELEASE-p7, incorrect use of a user-controlled pointer in the epair virtual network module allowed vnet jailed privileged users to panic the host system and potentially execute arbitrary code in the kernel.

Double free vulnerability in the krb5_def_store_mkey function in lib/kdb/kdb_default.c in MIT Kerberos 5 (krb5) 1.5 has unknown impact and remote authenticated attack vectors. NOTE: the free operations occur in code that stores the krb5kdc master key, and so the attacker must have privileges to store this key.

A vulnerability was found in Shenzhen Libituo Technology LBT-T300-T310 2.2.3.6. It has been rated as critical. Affected by this issue is the function sub_40B6F0 of the file at/appy.cgi. The manipulation of the argument wan_proto leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability in the Import Cisco IMC configuration utility of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition and implement arbitrary commands with root privileges on an affected device. The vulnerability is due to improper bounds checking by the import-config process. An attacker could exploit this vulnerability by sending malicious packets to an affected device. When the packets are processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to implement arbitrary code on the affected device with elevated privileges.

A vulnerability in the vContainer of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to cause a denial of service (DoS) condition and execute arbitrary code as the root user. The vulnerability is due to improper bounds checking by the vContainer. An attacker could exploit this vulnerability by sending a malicious file to an affected vContainer instance. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected vContainer, which could result in a DoS condition that the attacker could use to execute arbitrary code as the root user.