Unknown vulnerability in the HTTPMail service in MailEnable Professional before 1.6 has unknown impact and attack vectors.

Buffer overflow in MailEnable Imapd (MEIMAP.exe) allows remote attackers to execute arbitrary code via a long LOGIN command.

Stack-based buffer overflow in the IMAP service for MailEnable Professional and Enterprise Edition 2.0 through 2.35, Professional Edition 1.6 through 1.84, and Enterprise Edition 1.1 through 1.41 allows remote attackers to execute arbitrary code via a pre-authentication command followed by a crafted parameter and a long string, as addressed by the ME-10025 hotfix.

Stack-based buffer overflow in the POP service in MailEnable Standard 1.98 and earlier; Professional 1.84, and 2.35 and earlier; and Enterprise 1.41, and 2.35 and earlier before ME-10026 allows remote attackers to execute arbitrary code via a long argument to the PASS command.

Unspecified vulnerability in the POP service in MailEnable Standard Edition before 1.94, Professional Edition before 1.74, and Enterprise Edition before 1.22 has unknown attack vectors and impact related to "authentication exploits". NOTE: this is a different set of affected versions, and probably a different vulnerability than CVE-2006-1337.

Dell iDRAC9 versions 5.00.00.00 and later but prior to 5.10.10.00, contain an improper authentication vulnerability. A remote unauthenticated attacker may potentially exploit this vulnerability to gain access to the VNC Console.

The remote console in the Server Controller in IBM Lotus Domino 7.x and 8.x verifies credentials against a file located at a UNC share pathname specified by the client, which allows remote attackers to bypass authentication, and consequently execute arbitrary code, by placing this pathname in the COOKIEFILE field. NOTE: this might overlap CVE-2011-0920.

The Java Servlet framework on Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x does not require administrative authentication for unspecified actions, which allows remote attackers to execute arbitrary code via a crafted request, aka Bug ID CSCtf01253.

The web-based administration interface on the Camtron CMNC-200 Full HD IP Camera and TecVoz CMNC-200 Megapixel IP Camera with firmware 1.102A-008 allows remote attackers to bypass authentication via a // (slash slash) at the beginning of a URI, as demonstrated by the //system.html URI.

The default configuration of Pandora FMS 3.1 and earlier specifies an empty string for the loginhash_pwd field, which allows remote attackers to bypass authentication by sending a request to index.php with "admin" in the loginhash_user parameter, in conjunction with the md5 hash of "admin" in the loginhash_data parameter.

Sysaid – Sysaid System Takeover - An attacker can bypass the authentication process by accessing to: /wmiwizard.jsp, Then to: /ConcurrentLogin.jsp, then click on the login button, and it will redirect you to /home.jsp without any authentication.

A remote urlaccesscontroller authentication bypass vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).

The helpmanager servlet in the web server in HP OpenView Performance Insight (OVPI) 5.4 and earlier does not properly authenticate and validate requests, which allows remote attackers to execute arbitrary commands via vectors involving upload of a JSP document.

EMC NetWorker 8.2.1.x and 8.2.2.x before 8.2.2.6 and 9.x before 9.0.0.6 mishandles authentication, which allows remote attackers to execute arbitrary commands by leveraging access to a different NetWorker instance.

By using a specific credential string, an attacker with network access to the device’s web interface could circumvent the authentication scheme and perform administrative operations.

The Internet Authentication Service (IAS) in Microsoft Windows Vista SP2 and Server 2008 SP2 does not properly validate MS-CHAP v2 Protected Extensible Authentication Protocol (PEAP) authentication requests, which allows remote attackers to execute arbitrary code via crafted structures in a malformed request, aka "Internet Authentication Service Memory Corruption Vulnerability."

Siemens SpeedStream 5200 with NetPort Software 1.1 allows remote attackers to bypass authentication via an invalid Host header, possibly involving a trailing dot in the hostname.

userHandler.cgi in RaidSonic ICY BOX NAS firmware 2.3.2.IB.2.RS.1 allows remote attackers to bypass authentication and gain administrator privileges by setting the login parameter to admin. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information.

An issue was discovered on Mofi Network MOFI4500-4GXeLTE 4.1.5-std devices. The authentication function contains undocumented code that provides the ability to authenticate as root without knowing the actual root password. An adversary with the private key can remotely authenticate to the management interface as root.

Unspecified vulnerability in SimpleIrcBot before 1.0 Stable has unknown impact and attack vectors related to an "auth vulnerability."

Eaton MGEOPS Network Shutdown Module before 3.10 Build 13 allows remote attackers to execute arbitrary code by adding a custom action to the MGE frontend via pane_actionbutton.php, and then executing this action via exec_action.php.

Undocumented TELNET service in TRENDnet TEW-691GR and TEW-692GR when a web page named backdoor contains an HTML parameter of password and a value of j78G¬DFdg_24Mhw3.

The "Java Update" feature for Java Runtime Environment (JRE) for Sun JDK and JRE 6 Update 10 and earlier; JDK and JRE 5.0 Update 16 and earlier; and SDK and JRE 1.4.2_18 and earlier does not verify the signature of the JRE that is downloaded, which allows remote attackers to execute arbitrary code via DNS man-in-the-middle attacks.

The function in charge to check whether the user is already logged in init.php in Interspire Email Marketer (IEM) prior to 6.1.6 allows remote attackers to bypass authentication and obtain administrative access by using the IEM_CookieLogin cookie with a specially crafted value.

An authentication bypass vulnerability on UTStar WA3002G4 ADSL Broadband Modem WA3002G4-0021.01 devices allows attackers to directly access administrative settings and obtain cleartext credentials from HTML source, as demonstrated by info.cgi, upload.cgi, backupsettings.cgi, pppoe.cgi, resetrouter.cgi, and password.cgi.

In Android before 2018-01-05 on Qualcomm Snapdragon IoT, Snapdragon Mobile, Snapdragon Automobile APQ8096AU, MDM9206, MDM9650, MSM8996AU, SD 210/SD 212/SD 205, SD 425, SD 430, SD 625, SD 650/52, SD 820, SD 835, it is possible for the XBL loader to skip the authentication of device config.

A remote attacker can bypass the System Manager Mode on the Canon LBP6030w web interface without a PIN for /checkLogin.cgi via vectors involving /portal_top.html to get full access to the device. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation

An authentication vulnerability in HPE BSM Platform Application Performance Management System Health product versions 9.26, 9.30 and 9.40, allows remote users to bypass authentication.

GE Infinia/Infinia with Hawkeye 4 medical imaging systems all current versions are affected these devices use default or hard-coded credentials. Successful exploitation of this vulnerability may allow a remote attacker to bypass authentication and gain access to the affected devices.

A vulnerability in the REST API of the web-based user interface (web UI) of Cisco IOS XE 3.1 through 16.5 could allow an unauthenticated, remote attacker to bypass authentication to the REST API of the web UI of the affected software. The vulnerability is due to insufficient input validation for the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious API request to an affected device. A successful exploit could allow the attacker to bypass authentication and gain access to the web UI of the affected software. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuz46036.

It was discovered that the api/storage web interface in Unitrends Backup (UB) before 10.0.0 has an issue in which one of its input parameters was not validated. A remote attacker could use this flaw to bypass authentication and execute arbitrary commands with root privilege on the target system.

It was discovered that the bpserverd proprietary protocol in Unitrends Backup (UB) before 10.0.0, as invoked through xinetd, has an issue in which its authentication can be bypassed. A remote attacker could use this issue to execute arbitrary commands with root privilege on the target system.

Podcast Producer in Apple Mac OS X 10.5 before 10.5.6 allows remote attackers to bypass authentication and gain administrative access via unspecified vectors.

A specific device configuration can result in a commit failure condition. When this occurs, a user is logged in without being prompted for a password while trying to login through console, ssh, ftp, telnet or su, etc., This issue relies upon a device configuration precondition to occur. Typically, device configurations are the result of a trusted administrative change to the system's running configuration. The following error messages may be seen when this failure occurs: mgd: error: commit failed: (statements constraint check failed) Warning: Commit failed, activating partial configuration. Warning: Edit the router configuration to fix these errors. If the administrative changes are not made that result in such a failure, then this issue is not seen. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 12.3 prior to 12.3R10, 12.3R11; 12.3X48 prior to 12.3X48-D20; 13.2 prior to 13.2R8; 13.3 prior to 13.3R7; 14.1 prior to 14.1R4-S12, 14.1R5, 14.1R6; 14.1X53 prior to 14.1X53-D30; 14.2 prior to 14.2R4; 15.1 prior to 15.1F2, 15.1F3, 15.1R2.

Improper authentication issue in PTW-WMS1 firmware version 2.000.012 allows remote attackers to log in to the device with root privileges and conduct arbitrary operations via unspecified vectors.

SYN Flood or FIN Flood attack in ECos 1 and other versions embedded devices results in web Authentication Bypass. "eCos Embedded Web Servers used by Multiple Routers and Home devices, while sending SYN Flood or FIN Flood packets fails to validate and handle the packets and does not ask for any sign of authentication resulting in Authentication Bypass. An attacker can take complete advantage of this bug and take over the device remotely or locally. The bug has been successfully tested and reproduced in some versions of SOHO Routers manufactured by TOTOLINK, GREATEK and others."

The management console in the Volume Manager Scheduler Service (aka VxSchedService.exe) in Symantec Veritas Storage Foundation for Windows (SFW) 5.0, 5.0 RP1a, and 5.1 accepts NULL NTLMSSP authentication, which allows remote attackers to execute arbitrary code via requests to the service socket that create "snapshots schedules" registry values specifying future command execution. NOTE: this issue exists because of an incomplete fix for CVE-2007-2279.

SKYSEA Client View Ver.11.221.03 and earlier allows remote code execution via a flaw in processing authentication on the TCP connection with the management console program.

A vulnerability has been identified in Firmware variant PROFINET IO for EN100 Ethernet module : All versions < V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions < V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions < V1.03; Firmware variant IEC 104 for EN100 Ethernet module : All versions < V1.21; EN100 Ethernet module included in SIPROTEC Merging Unit 6MU80 : All versions < 1.02.02. Attackers with network access to the device's web interface (port 80/tcp) could possibly circumvent authentication and perform certain administrative operations.

A vulnerability in the web-based graphical user interface (GUI) of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. Cisco Prime Home versions 5.1.1.6 and earlier and 5.2.2.2 and earlier have been confirmed to be vulnerable. Cisco Prime Home versions 6.0 and later are not vulnerable. More Information: CSCvb71732. Known Affected Releases: 5.0 5.0(1) 5.0(1.1) 5.0(1.2) 5.0(2) 5.15.1(0) 5.1(1) 5.1(1.3) 5.1(1.4) 5.1(1.5) 5.1(1.6) 5.1(2) 5.1(2.1) 5.1(2.3) 5.25.2(0.1) 5.2(1.0) 5.2(1.2) 5.2(2.0) 5.2(2.1) 5.2(2.2).

Microsoft Host Integration Server (HIS) 2000, 2004, and 2006 does not limit RPC access to administrative functions, which allows remote attackers to bypass authentication and execute arbitrary programs via a crafted SNA RPC message using opcode 1 or 6 to call the CreateProcess function, aka "HIS Command Execution Vulnerability."

An Improper Authentication issue was discovered in JanTek JTC-200, all versions. The improper authentication could provide an undocumented BusyBox Linux shell accessible over the TELNET service without any authentication.

A vulnerability in the interdevice communications interface of the Cisco IP Interoperability and Collaboration System (IPICS) Universal Media Services (UMS) could allow an unauthenticated, remote attacker to modify configuration parameters of the UMS and cause the system to become unavailable. Affected Products: This vulnerability affects Cisco IPICS releases 4.8(1) to 4.10(1). More Information: CSCva46644. Known Affected Releases: 4.10(1) 4.8(1) 4.8(2) 4.9(1) 4.9(2).

admin/upload.php in le.cms 1.4 and earlier allows remote attackers to bypass administrative authentication, and upload and execute arbitrary files in images/, via a nonzero value for the submit0 parameter in conjunction with filenames in the filename and upload parameters.

The Axesstel AXW-D800 modem with D2_ETH_109_01_VEBR Jun-14-2006 software does not require authentication for (1) etc/config/System.html, (2) etc/config/Network.html, (3) etc/config/Security.html, (4) cgi-bin/sysconf.cgi, and (5) cgi-bin/route.cgi, which allows remote attackers to change the modem's configuration via direct requests.

The pam_sm_authenticate function in pam_sshauth.c in libpam-sshauth might allow context-dependent attackers to bypass authentication or gain privileges via a system user account.

Unspecified vulnerability in Citrix Access Gateway Standard Edition 4.5.7 and earlier and Advanced Edition 4.5 HF2 and earlier allows attackers to bypass authentication and gain "access to network resources" via unspecified vectors.

J-Web in Juniper Junos OS before 12.1X46-D45, 12.1X46-D50, 12.1X47 before 12.1X47-D35, 12.3 before 12.3R12, 12.3X48 before 12.3X48-D25, 13.3 before 13.3R10, 13.3R9 before 13.3R9-S1, 14.1 before 14.1R7, 14.1X53 before 14.1X53-D35, 14.2 before 14.2R6, 15.1 before 15.1A2 or 15.1F4, 15.1X49 before 15.1X49-D30, and 15.1R before 15.1R3 might allow remote attackers to obtain sensitive information and consequently gain administrative privileges via unspecified vectors.

VRTSweb.exe in VRTSweb in Symantec Backup Exec Continuous Protection Server (CPS) 11d, 12.0, and 12.5; Veritas NetBackup Operations Manager (NOM) 6.0 GA through 6.5.5; Veritas Backup Reporter (VBR) 6.0 GA through 6.6; Veritas Storage Foundation (SF) 3.5; Veritas Storage Foundation for Windows High Availability (SFWHA) 4.3MP2, 5.0, 5.0RP1a, 5.0RP2, 5.1, and 5.1AP1; Veritas Storage Foundation for High Availability (SFHA) 3.5; Veritas Storage Foundation for Oracle (SFO) 4.1, 5.0, and 5.0.1; Veritas Storage Foundation for DB2 4.1 and 5.0; Veritas Storage Foundation for Sybase 4.1 and 5.0; Veritas Storage Foundation for Oracle Real Application Cluster (SFRAC) 3.5, 4.0, 4.1, and 5.0; Veritas Storage Foundation Manager (SFM) 1.0, 1.0 MP1, 1.1, 1.1.1Ux, 1.1.1Win, and 2.0; Veritas Cluster Server (VCS) 3.5, 4.0, 4.1, and 5.0; Veritas Cluster Server One (VCSOne) 2.0, 2.0.1, and 2.0.2; Veritas Application Director (VAD) 1.1 and 1.1 Platform Expansion; Veritas Cluster Server Management Console (VCSMC) 5.1, 5.5, and 5.5.1; Veritas Storage Foundation Cluster File System (SFCFS) 3.5, 4.0, 4.1, and 5.0; Veritas Storage Foundation Cluster File System for Oracle RAC (SFCFS RAC) 5.0; Veritas Command Central Storage (CCS) 4.x, 5.0, and 5.1; Veritas Command Central Enterprise Reporter (CC-ER) 5.0 GA, 5.0 MP1, 5.0 MP1RP1, and 5.1; Veritas Command Central Storage Change Manager (CC-SCM) 5.0 and 5.1; and Veritas MicroMeasure 5.0 does not properly validate authentication requests, which allows remote attackers to trigger the unpacking of a WAR archive, and execute arbitrary code in the contained files, via crafted data to TCP port 14300.