NMMediaServer.exe in Nero MediaHome 3.3.3.0 and earlier, as used in Nero 8.3.2.1 and earlier, allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via a long HTTP request to TCP port 54444, a different vector than CVE-2007-2322.

The server driver (srv.sys) in Microsoft Windows NT 4.0, 2000, XP, and Server 2003 allows remote attackers to cause a denial of service (system crash) via an SMB_COM_TRANSACTION SMB message that contains a string without null character termination, which leads to a NULL dereference in the ExecuteTransaction function, possibly related to an "SMB PIPE," aka the "Mailslot DOS" vulnerability. NOTE: the name "Mailslot DOS" was derived from incomplete initial research; the vulnerability is not associated with a mailslot.

The IPv6 snooping functionality in the first-hop security subsystem in Cisco IOS 12.2, 15.0, 15.1, 15.2, 15.3, 15.4, and 15.5 and IOS XE 3.2SE, 3.3SE, 3.3XO, 3.4SG, 3.5E, and 3.6E before 3.6.3E; 3.7E before 3.7.2E; 3.9S and 3.10S before 3.10.6S; 3.11S before 3.11.4S; 3.12S and 3.13S before 3.13.3S; and 3.14S before 3.14.2S does not properly implement the Control Plane Protection (aka CPPr) feature, which allows remote attackers to cause a denial of service (device reload) via a flood of ND packets, aka Bug ID CSCus19794.

SCTP in Linux kernel before 2.6.16.17 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a chunk length that is inconsistent with the actual length of provided parameters.

In goform/setSysTools on Tenda N301 wireless routers, attackers can trigger a device crash via a zero wanMTU value. (Prohibition of this zero value is only enforced within the GUI.)

A vulnerability in the TCP processing engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper handling of TCP traffic. An attacker could exploit this vulnerability by sending a specific sequence of packets at a high rate through an affected device. A successful exploit could allow the attacker to temporarily disrupt traffic through the device while it reboots.

The Broadcom BCM4325 and BCM4329 Wi-Fi chips, as used in certain Acer, Apple, Asus, Ford, HTC, Kyocera, LG, Malata, Motorola, Nokia, Pantech, Samsung, and Sony products, allow remote attackers to cause a denial of service (out-of-bounds read and Wi-Fi outage) via an RSN 802.11i information element.

There is an Input Verification Vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may cause the system to reset.

A vulnerability in the TCP proxy functionality for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to an error in TCP-based packet inspection, which could cause the TCP packet to have an invalid Layer 2 (L2)-formatted header. An attacker could exploit this vulnerability by sending a crafted TCP packet sequence to the targeted device. A successful exploit could allow the attacker to cause a DoS condition.

Multiple vulnerabilities in the implementation of the Lightweight Directory Access Protocol (LDAP) feature in Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of LDAP packets by an affected device. An attacker could exploit these vulnerabilities by sending an LDAP packet crafted using Basic Encoding Rules (BER) to an affected device. The LDAP packet must have a source IP address of an LDAP server configured on the targeted device. A successful exploit could cause the affected device to reload, resulting in a DoS condition. Firepower 4100 Series Next-Generation Firewalls are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. Firepower 9300 Security Appliances are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. MDS 9000 Series Multilayer Switches are affected in versions prior to 8.2(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(1). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(2). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(20), 7.3(2)D1(1), and 8.2(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(1). UCS 6200 and 6300 Fabric Interconnect are affected in versions prior to 3.2(2b).

Multiple vulnerabilities in the implementation of the Lightweight Directory Access Protocol (LDAP) feature in Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of LDAP packets by an affected device. An attacker could exploit these vulnerabilities by sending an LDAP packet crafted using Basic Encoding Rules (BER) to an affected device. The LDAP packet must have a source IP address of an LDAP server configured on the targeted device. A successful exploit could cause the affected device to reload, resulting in a DoS condition. Firepower 4100 Series Next-Generation Firewalls are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. Firepower 9300 Security Appliances are affected in versions prior to 2.0.1.201, 2.2.2.54 and 2.3.1.75. MDS 9000 Series Multilayer Switches are affected in versions prior to 8.2(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(1). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(2). Nexus 7000 and 7700 Series Switches are affected in versions prior to 8.2(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(1). Cisco UCS 6200 and 6300 Fabric Interconnect devices are affected in versions prior to 3.2(2b).

Algorithmic complexity vulnerability in Address.pm in the Email-Address module 1.908 and earlier for Perl allows remote attackers to cause a denial of service (CPU consumption) via a crafted string containing a list of e-mail addresses in conjunction with parenthesis characters that can be associated with nested comments. NOTE: the default configuration in 1.908 mitigates this vulnerability but misparses certain realistic comments.

A vulnerability in the Point-to-Point Tunneling Protocol (PPTP) VPN packet processing functionality in Cisco Aironet Access Points (APs) could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Generic Routing Encapsulation (GRE) frames that pass through the data plane of an affected AP. An attacker could exploit this vulnerability by associating to a vulnerable AP, initiating a PPTP VPN connection to an arbitrary PPTP VPN server, and sending a malicious GRE frame through the data plane of the AP. A successful exploit could allow the attacker to cause an internal process of the targeted AP to crash, which in turn would cause the AP to reload. The AP reload would cause a DoS condition for clients that are associated with the AP.

Improper Input Validation vulnerability exists in Modicon M241/M251 logic controllers firmware prior to V5.1.9.1 that could cause denial of service when specific crafted requests are sent to the controller over HTTP.

Netfilter in Linux kernel 2.6.8.1 allows remote attackers to cause a denial of service (kernel crash) via crafted IP packet fragments.

GE PACSystems RX3i CPE100/115: All versions prior to R9.85,CPE302/305/310/330/400/410: All versions prior to R9.90,CRU/320 All versions(End of Life) may allow an attacker sending specially manipulated packets to cause the module state to change to halt-mode, resulting in a denial-of-service condition. An operator must reboot the CPU module after removing battery or energy pack to recover from halt-mode.

There is an Input Verification Vulnerability in Huawei Smartphone. Successful exploitation of insufficient input verification may cause the system to restart.

A vulnerability in the FTP application layer gateway (ALG) functionality used by Network Address Translation (NAT), NAT IPv6 to IPv4 (NAT64), and the Zone-Based Policy Firewall (ZBFW) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a buffer overflow that occurs when an affected device inspects certain FTP traffic. An attacker could exploit this vulnerability by performing a specific FTP transfer through the device. A successful exploit could allow the attacker to cause the device to reload.

A vulnerability in Unified Threat Defense (UTD) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper validation of IPv6 packets through the UTD feature. An attacker could exploit this vulnerability by sending IPv6 traffic through an affected device that is configured with UTD. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

Improper Input Validation vulnerability in ABB 800xA, Control Software for AC 800M, Control Builder Safe, Compact Product Suite - Control and I/O, ABB Base Software for SoftControl allows an attacker to cause the denial of service.

buffer.c in named in ISC BIND 9.x before 9.9.7-P3 and 9.10.x before 9.10.2-P4 allows remote attackers to cause a denial of service (assertion failure and daemon exit) by creating a zone containing a malformed DNSSEC key and issuing a query for a name in that zone.

A vulnerability in the Cisco TrustSec (CTS) Protected Access Credential (PAC) provisioning module of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of attributes in RADIUS messages. An attacker could exploit this vulnerability by sending a malicious RADIUS message to an affected device while the device is in a specific state.

A vulnerability in the RADIUS Change of Authorization (CoA) code of Cisco TrustSec, a feature within Cisco IOS XE Software, could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of a malformed packet. An attacker could exploit this vulnerability by sending a malformed packet to an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.

A vulnerability in the Raw Socket Transport feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper parsing of Raw Socket Transport payloads. An attacker could exploit this vulnerability by establishing a TCP session and then sending a malicious TCP segment via IPv4 to an affected device. This cannot be exploited via IPv6, as the Raw Socket Transport feature does not support IPv6 as a network layer protocol.

A vulnerability in the ingress flow creation functionality of Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause the CPU to increase upwards of 100% utilization, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to incorrect handling of an internal software lock that could prevent other system processes from getting CPU cycles, causing a high CPU condition. An attacker could exploit this vulnerability by sending a steady stream of malicious IP packets that can cause connections to be created on the targeted device. A successful exploit could allow the attacker to exhaust CPU resources, resulting in a DoS condition during which traffic through the device could be delayed. This vulnerability applies to either IPv4 or IPv6 ingress traffic. This vulnerability affects Cisco Adaptive Security Appliance (ASA) and Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliances (ASAv), Firepower 2100 Series Security Appliances, Firepower 4110 Security Appliances, Firepower 9300 ASA Security Modules. Cisco Bug IDs: CSCvf63718.

Cisco IOS XE 2.x and 3.x before 3.10.6S, 3.11.xS through 3.13.xS before 3.13.3S, and 3.14.xS through 3.15.xS before 3.15.1S allows remote attackers to cause a denial of service (device reload) via IPv4 packets that require NAT and MPLS actions, aka Bug ID CSCut96933.

There is a denial of service vulnerability in the verisions V200R005C00SPC500 of S5700 and V200R005C00SPC500 of S6700. An attacker could exploit this vulnerability by sending specific message to a targeted device. Due to insufficient input validation, successful exploit can cause the service abnormal.

Insufficient input validation in Intel(R) Baseboard Management Controller firmware may allow an unauthenticated user to potentially enable denial of service via network access.

The IPv6 snooping functionality in the first-hop security subsystem in Cisco IOS 12.2, 15.0, 15.1, 15.2, 15.3, 15.4, and 15.5 and IOS XE 3.2SE, 3.3SE, 3.3XO, 3.4SG, 3.5E, and 3.6E before 3.6.3E; 3.7E before 3.7.2E; 3.9S and 3.10S before 3.10.6S; 3.11S before 3.11.4S; 3.12S and 3.13S before 3.13.3S; and 3.14S before 3.14.2S allows remote attackers to cause a denial of service (device reload) via a malformed ND packet with the Cryptographically Generated Address (CGA) option, aka Bug ID CSCuo04400.

Cisco AsyncOS before 8.5.7-043, 9.x before 9.1.1-023, and 9.5.x and 9.6.x before 9.6.0-046 on Email Security Appliance (ESA) devices mishandles malformed fields during body-contains, attachment-contains, every-attachment-contains, attachment-binary-contains, dictionary-match, and attachment-dictionary-match filtering, which allows remote attackers to cause a denial of service (memory consumption) via a crafted attachment in an e-mail message, aka Bug ID CSCuv47151.

Cisco NX-OS 7.1(1)N1(1) on Nexus 5500, 5600, and 6000 devices does not properly validate PDUs in SNMP packets, which allows remote attackers to cause a denial of service (SNMP application restart) via a crafted packet, aka Bug ID CSCut84645.

A vulnerability in the Smart Install feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of packet data. An attacker could exploit this vulnerability by sending a crafted packet to an affected device on TCP port 4786. Only Smart Install client switches are affected. Cisco devices that are configured as a Smart Install director are not affected by this vulnerability. Cisco Bug IDs: CSCvd40673.

Adobe Reader and Acrobat 10.x before 10.1.15 and 11.x before 11.0.12, Acrobat and Acrobat Reader DC Classic before 2015.006.30060, and Acrobat and Acrobat Reader DC Continuous before 2015.008.20082 on Windows and OS X allow attackers to cause a denial of service via invalid data.

Cloud Foundry Routing, all versions before 0.193.0, does not properly validate nonce input. A remote unauthenticated malicious user could forge an HTTP route service request using an invalid nonce that will cause the Gorouter to crash.

The MGCP implementation on the Cisco PGW 2200 Softswitch with software before 9.7(3)S11 allows remote attackers to cause a denial of service (device crash) via a malformed packet, aka Bug ID CSCsl39126.

On D-Link DIR-605L devices, firmware before 2.08UIBetaB01.bin allows an unauthenticated GET request to trigger a reboot.

Cisco IOS 11.x and 12.0 through 12.2 allows remote attackers to cause a denial of service (traffic block) by sending a particular sequence of IPv4 packets to an interface on the device, causing the input queue on that interface to be marked as full.

Cisco PIX firewall 5.x.x, and 6.3.1 and earlier, allows remote attackers to cause a denial of service (crash and reload) via an SNMPv3 message when snmp-server is set.

Netgear FM114P firmware 1.3 wireless firewall allows remote attackers to cause a denial of service (crash or hang) via a large number of TCP connection requests.

The Cisco Optical Service Module (OSM) for the Catalyst 6500 and 7600 series running Cisco IOS 12.1(8)E through 12.1(13.4)E allows remote attackers to cause a denial of service (hang) via a malformed packet.

Linksys WET11 firmware 1.31 and 1.32 allows remote attackers to cause a denial of service (crash) via a packet containing the device's hardware address as the source MAC address in the DLC header.

The c-client library in Internet Message Access Protocol (IMAP) dated before 2002 RC2, as used by Pine 4.20 through 4.44, allows remote attackers to cause a denial of service (client crash) via a MIME-encoded email with Content-Type header containing an empty boundary field.

The IP stack in multiple Huawei Campus series switch models allows remote attackers to cause a denial of service (reboot) via a crafted ICMP request message.

ICQ client 2001b, 2002a and 2002b allows remote attackers to cause a denial of service (CPU consumption or crash) via a message with a large number of emoticons.

Improper Input Validation vulnerability in Mitsubishi Electric MELSEC iQ-R Series R00/01/02CPU, MELSEC iQ-R Series R04/08/16/32/120(EN)CPU, MELSEC iQ-R Series R08/16/32/120SFCPU, MELSEC iQ-R Series R08/16/32/120PCPU, MELSEC iQ-R Series R08/16/32/120PSFCPU, MELSEC iQ-R Series R16/32/64MTCPU, MELSEC iQ-R Series R12CCPU-V, MELSEC Q Series Q03UDECPU, MELSEC Q Series Q04/06/10/13/20/26/50/100UDEHCPU, MELSEC Q Series Q03/04/06/13/26UDVCPU, MELSEC Q Series Q04/06/13/26UDPVCPU, MELSEC Q Series Q12DCCPU-V, MELSEC Q Series Q24DHCCPU-V(G), MELSEC Q Series Q24/26DHCCPU-LS, MELSEC Q Series MR-MQ100, MELSEC Q Series Q172/173DCPU-S1, MELSEC Q Series Q172/173DSCPU, MELSEC Q Series Q170MCPU, MELSEC Q Series Q170MSCPU(-S1), MELSEC L Series L02/06/26CPU(-P), MELSEC L Series L26CPU-(P)BT and MELIPC Series MI5122-VW allows a remote unauthenticated attacker to cause a denial-of-service (DoS) condition by sending specially crafted packets. System reset is required for recovery.

In processMessagePart of InboundSmsHandler.java, there is a possible remote denial of service due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android Versions: Android-6.0 Android-6.0.1 Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android ID: A-72298611.

A vulnerability in the software-based SSL/TLS message handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message through an affected device. SSL/TLS messages sent to an affected device do not trigger this vulnerability. A successful exploit could allow the attacker to cause a process to crash. This crash would then trigger a reload of the device. No manual intervention is needed to recover the device after the reload.