Unspecified vulnerability in the backup-archive client in IBM Tivoli Storage Manager (TSM) 5.3.x before 5.3.6.10, 5.4.x before 5.4.3.4, 5.5.x before 5.5.3, 6.1.x before 6.1.4, and 6.2.x before 6.2.2 on Unix and Linux allows local users to overwrite arbitrary files via unknown vectors.

On Linux running on PowerPC hardware (Power8 or later) a user process can craft a signal frame and then do a sigreturn so that the kernel will take an exception (interrupt), and use the r1 value *from the signal frame* as the kernel stack pointer. As part of the exception entry the content of the signal frame is written to the kernel stack, allowing an attacker to overwrite arbitrary locations with arbitrary values. The exception handling does produce an oops, and a panic if panic_on_oops=1, but only after kernel memory has been over written. This flaw was introduced in commit: "5d176f751ee3 (powerpc: tm: Enable transactional memory (TM) lazily for userspace)" which was merged upstream into v4.9-rc1. Please note that kernels built with CONFIG_PPC_TRANSACTIONAL_MEM=n are not vulnerable.

IBM WebSphere Application Server (WAS) 8.5 through 8.5.0.2 on UNIX allows local users to gain privileges by leveraging improper process initialization. IBM X-Force ID: 84362.

Unspecified vulnerability in the queue manager in IBM WebSphere MQ (WMQ) 5.3, 6.0 before 6.0.2.6, and 7.0 before 7.0.0.2 allows local users to gain privileges via vectors related to the (1) setmqaut, (2) dmpmqaut, and (3) dspmqaut authorization commands.

Buffer overflow in the utape program in devices.scsi.tape.diag in IBM AIX 5.2 and 5.3 allows local users to gain privileges via unspecified vectors.

The Self Tuning Memory Manager (STMM) component in IBM DB2 9.1 before FP8, 9.5 before FP5, and 9.7 before FP1 uses 0666 permissions for the STMM log file, which allows local users to cause a denial of service or have unspecified other impact by writing to this file.

The Query Compiler, Rewrite, and Optimizer component in IBM DB2 9.1 before FP8, 9.5 before FP5, and 9.7 before FP1 does not enforce privilege requirements for access to a (1) sequence or (2) global-variable object, which allows remote authenticated users to make use of data via unspecified vectors.

Multiple buffer overflows in bos.rte.control in IBM AIX 5.2 and 5.3 allow local users to gain privileges via unspecified vectors related to the (1) swap, (2) swapoff, and (3) swapon programs.

Unspecified vulnerability in IBM WebSphere Portal 6.0 before 6.0.1.5 has unknown impact and attack vectors related to "Access problems with BasicAuthTAI."

dasauto in IBM DB2 8 before FP18, 9.1 before FP8, 9.5 before FP4, and 9.7 before FP1 permits execution by unprivileged user accounts, which has unspecified impact and local attack vectors.

The Install component in IBM DB2 9.5 before FP5 and 9.7 before FP1 configures the High Availability (HA) scripts with incorrect file-permission and authorization settings, which has unknown impact and local attack vectors.

Unspecified vulnerability in the PropFilePasswordEncoder utility in IBM WebSphere Application Server (WAS) before 6.0.2 Fix Pack 25 (6.0.2.25) has unknown impact and attack vectors.

The Servlet Engine/Web Container component in IBM WebSphere Application Server (WAS) 6.0.2 before 6.0.2.37 does not properly implement security constraints on the (1) doGet and (2) doTrace methods, which allows remote attackers to bypass intended access restrictions and obtain sensitive information via a crafted HTTP HEAD request to a Web Application.

enq in bos.rte.printers in IBM AIX 6.1.0 through 6.1.2, when a print queue is defined in /etc/qconfig, allows local users to delete arbitrary files via unspecified vectors.

The nddstat programs on IBM AIX 5.2, 5.3, and 6.1 do not properly handle environment variables, which allows local users to gain privileges by invoking (1) atmstat, (2) entstat, (3) fddistat, (4) hdlcstat, or (5) tokstat.

IBM DB2 8 before FP18, 9.1 before FP8, and 9.5 before FP4 allows remote authenticated users to bypass intended access restrictions, and update, insert, or delete table rows, via unspecified vectors.

A certain debugging component in IBM AIX 5.3 and 6.1 does not properly handle the (1) _LIB_INIT_DBG and (2) _LIB_INIT_DBG_FILE environment variables, which allows local users to gain privileges by leveraging a setuid-root program to create an arbitrary root-owned file with world-writable permissions, related to libC.a (aka the XL C++ runtime library) in AIX 5.3 and libc.a in AIX 6.1.

IBM DB2 8.1 before FP18 allows attackers to obtain unspecified access via a das command.

Unspecified vulnerability in IBM WebSphere Business Modeler Basic and Advanced 6.0.2.1 before Interim Fix 11 allows remote authenticated users to bypass intended access restrictions and delete unspecified repository resources via unknown vectors, even when they are not administrators or members of the repository's owning group.

IBM Lotus Notes 8 for Linux before 8.0.1 uses (1) unspecified weak permissions for the installation kit obtained through a Notes 8 download and (2) 0777 permissions for the installdata file that is created by setup.sh, which allows local users to gain privileges via a Trojan horse file.

Multiple unspecified vulnerabilities in IBM Hardware Management Console (HMC) 7 R3.2.0 allow attackers to gain privileges via "some HMC commands."

IBM FileNet Content Manager 4.0, 4.0.1, and 4.5, as used in IBM WebSphere Application Server (WAS) and Oracle BEA WebLogic Application Server, when the CE Web Services listener has a certain WSEAF configuration, does not properly restrict use of a cached Subject, which allows remote attackers to obtain access with the credentials of a recently authenticated user via unspecified vectors.

IBM Db2 on Cloud Pak for Data and Db2 Warehouse on Cloud Pak for Data 3.5, 4.0, 4.5, 4.6, 4.7, and 4.8 could allow a user with access to the Kubernetes pod, to make system calls compromising the security of containers. IBM X-Force ID: 265264.

Unspecified vulnerability in the SSL LOAD GSKIT action in IBM DB2 UDB 9.1 before Fixpak 4 has unknown impact and attack vectors, involving a call to dlopen when the effective uid is root.

The System Management/Repository component in IBM WebSphere Application Server (WAS) 7.0 before 7.0.0.5 on z/OS uses weak file permissions for new applications, which allows remote attackers to obtain sensitive information via unspecified vectors.

IBM WebSphere Application Server (WAS) 6.1 through 6.1.0.24 and 7.0 through 7.0.0.4, IBM WebSphere Portal Server 5.1 through 6.0, and IBM Integrated Solutions Console (ISC) 6.0.1 do not properly set the IsSecurityEnabled security flag during migration of WebSphere Member Manager (WMM) to Virtual Member Manager (VMM) and a Federated Repository, which allows attackers to obtain sensitive information from repositories via unspecified vectors.

IBM DB2 UDB 9.1 before Fixpak 4 assigns incorrect privileges to the (1) DB2ADMNS and (2) DB2USERS alternative groups, which has unknown impact. NOTE: the vendor description of this issue is too vague to be certain that it is security-related.

The IBM Stax XMLStreamWriter in the Web Services component in IBM WebSphere Application Server (WAS) 6.1 before 6.1.0.25 does not properly process XML encoding, which allows remote attackers to bypass intended access restrictions and possibly modify data via "XML fuzzing attacks" sent through SOAP requests.

at in bos.rte.cron on IBM AIX 5.2.0, 5.3.0 through 5.3.9, and 6.1.0 through 6.1.2 allows local users to read arbitrary files via unspecified vectors, related to failure to drop root privileges.

The Web Editor in Dassault Systemes ENOVIA SmarTeam V5 before Release 18 Service Pack 8, and possibly CATIA and other products, allows remote authenticated users to read the profile card of an object in the document class via a link that is sent from the owner of the document object.

The perfstat kernel extension in bos.perf.perfstat in AIX 5.3 does not verify privileges when processing a SET call, which allows local users to cause a denial of service (system hang or crash) via unspecified SET operations.

The (1) mod_ibm_ssl and (2) mod_cgid modules in IBM HTTP Server 6.0.x before 6.0.2.31 and 6.1.x before 6.1.0.19, as used in WebSphere Application Server (WAS), set incorrect permissions for AF_UNIX sockets, which has unknown impact and local attack vectors.

IBM WebSphere Application Server (WAS) 7 before 7.0.0.1 on Windows allows remote attackers to bypass "Authorization checking" and obtain sensitive information from JSP pages via a crafted request. NOTE: this is probably a duplicate of CVE-2008-5412.

IBM WebSphere Application Server (WAS) 7.0 before 7.0.0.3 uses weak permissions (777) for files associated with unspecified "interim fixes," which allows attackers to modify files that would not have been accessible if the intended 755 permissions were used.

Unspecified vulnerability in IBM DB2 Content Manager before 8.3 FP8 has unknown impact and attack vectors related to the AllowedTrustedLogin privilege.

IBM Security Identity Manager (ISIM) Virtual Appliance 7.0.0.0 through 7.0.1.0 before 7.0.1-ISS-SIM-FP0001 allows local users to gain administrator privileges via unspecified vectors. IBM X-Force ID: 111643.

IBM Rational Collaborative Lifecycle Management (CLM) 3.0.1 before 3.0.1.6 iFix7 Interim Fix 1, 4.0.x before 4.0.7 iFix10, 5.0.x before 5.0.2 iFix15, and 6.0.x before 6.0.1 iFix4; Rational Quality Manager (RQM) 3.0.x before 3.0.1.6 iFix7 Interim Fix 1, 4.0.x before 4.0.7 iFix10, 5.0.x before 5.0.2 iFix15, and 6.0.x before 6.0.1 iFix4; Rational Team Concert (RTC) 3.0.x before 3.0.1.6 iFix7 Interim Fix 1, 4.0.x before 4.0.7 iFix10, 5.0.x before 5.0.2 iFix15, and 6.0.x before 6.0.1 iFix4; Rational Requirements Composer (RRC) 3.0.x before 3.0.1.6 iFix7 Interim Fix 1 and 4.0.x before 4.0.7 iFix10; Rational DOORS Next Generation (RDNG) 4.0.x before 4.0.7 iFix10, 5.0.x before 5.0.2 iFix15, and 6.0.x before 6.0.1 iFix4; Rational Engineering Lifecycle Manager (RELM) 4.0.3, 4.0.4, 4.0.5, 4.0.6, and 4.0.7 before iFix10, 5.0.x before 5.0.2 iFix1, and 6.0.x before 6.0.2; Rational Rhapsody Design Manager (Rhapsody DM) 4.0.x before 4.0.7 iFix10, 5.0.x before 5.0.2 iFix15, and 6.0.x before 6.0.1 iFix4; and Rational Software Architect Design Manager (RSA DM) 4.0.x before 4.0.7 iFix10, 5.0.x before 5.0.2 iFix15, and 6.0.x before 6.0.1 iFix4 might allow local users to gain privileges via unspecified vectors. IBM X-Force ID: 108098.

crontab in bos.rte.cron in IBM AIX 6.1.0 through 6.1.2 allows local users with aix.system.config.cron authorization to gain privileges by launching an editor.

IBM WebSphere Application Server (WAS) before 6.0.2 Fix Pack 25 (6.0.2.25) and 6.1 before Fix Pack 15 (6.1.0.15) writes unspecified cleartext information to http_plugin.log, which might allow local users to obtain sensitive information by reading this file.

swcons in bos.rte.console in IBM AIX 5.2.0 through 6.1.1 allows local users in the system group to create or overwrite an arbitrary file, and establish weak permissions and root ownership for this file, via unspecified vectors. NOTE: this can be leveraged to gain privileges. NOTE: this issue exists because of an incomplete fix for CVE-2007-5805.

The Editor in IBM ENOVIA SmarTeam 5 before release 18 SP5, and release 19 before SP01, allows remote authenticated users to bypass intended access restrictions and read Document objects via the Workflow Process (aka Flow Process) view.

The routine infrastructure component in IBM DB2 8 before FP17, 9.1 before FP5, and 9.5 before FP1 on Unix and Linux does not change the ownership of the db2fmp process, which has unknown impact and attack vectors.

The Downlevel DB2RA Support component in IBM DB2 9.1 before Fixpak 4a allows remote attackers to cause a denial of service (instance crash) via a crafted CONNECT data stream that simulates a V7 client connect request.

IBM Tivoli Netcool/Webtop 2.1 before 2.1.0.5 preserves cached user privileges after logout, which allows physically proximate attackers to hijack a session by visiting an unattended workstation, as demonstrated by a root session that is still valid after a subsequent read-only session has begun.

Unspecified vulnerability in the CLR stored procedure deployment from IBM Database Add-Ins for Visual Studio in the Visual Studio Net component in IBM DB2 9.1 before Fixpak 5 and 9.5 before Fixpak 2 allows remote authenticated users to execute arbitrary code via unknown vectors.

Unspecified vulnerability in the DB2 Administration Server (DAS) in the Core DAS function component in IBM DB2 9.1 before Fixpak 5 allows local users to gain privileges, aka a "FILE CREATION VULNERABILITY." NOTE: this may be the same as CVE-2007-5664.

Unspecified vulnerability in IBM Lotus Quickr 8.1 before Fix pack 1 (8.1.0.1) allows a place manager to "demote or delete a place superuser group" via unknown vectors.

Unspecified vulnerability in IBM Lotus Quickr 8.1 before Fix pack 1 (8.1.0.1) allows editors to delete pages that were created by a different author via unknown vectors.

Unspecified vulnerability in iostat in IBM AIX 5.2, 5.3, and 6.1 allows local users to gain privileges via unknown vectors related to an "environment variable handling error."

IBM WebSphere Portal 5.1 through 6.1.0.0 allows remote attackers to bypass authentication and obtain administrative access via unspecified vectors.