The krb5_gss_process_context_token function in lib/gssapi/krb5/process_context_token.c in the libgssapi_krb5 library in MIT Kerberos 5 (aka krb5) through 1.11.5, 1.12.x through 1.12.2, and 1.13.x before 1.13.1 does not properly maintain security-context handles, which allows remote authenticated users to cause a denial of service (use-after-free and double free, and daemon crash) or possibly execute arbitrary code via crafted GSSAPI traffic, as demonstrated by traffic to kadmind.

Stack-based buffer overflow in the rename_principal_2_svc function in kadmind for MIT Kerberos 1.5.3, 1.6.1, and other versions allows remote authenticated users to execute arbitrary code via a crafted request to rename a principal.

The auth_gssapi_unwrap_data function in lib/rpc/auth_gssapi_misc.c in MIT Kerberos 5 (aka krb5) through 1.11.5, 1.12.x through 1.12.2, and 1.13.x before 1.13.1 does not properly handle partial XDR deserialization, which allows remote authenticated users to cause a denial of service (use-after-free and double free, and daemon crash) or possibly execute arbitrary code via malformed XDR data, as demonstrated by data sent to kadmind.

Double free vulnerability in the GSS-API library (lib/gssapi/krb5/k5unseal.c), as used by the Kerberos administration daemon (kadmind) in MIT krb5 before 1.6.1, when used with the authentication method provided by the RPCSEC_GSS RPC library, allows remote authenticated users to execute arbitrary code and modify the Kerberos key database via a message with an "an invalid direction encoding".

Stack-based buffer overflow in the krb5_klog_syslog function in the kadm5 library, as used by the Kerberos administration daemon (kadmind) and Key Distribution Center (KDC), in MIT krb5 before 1.6.1 allows remote authenticated users to execute arbitrary code and modify the Kerberos key database via crafted arguments, possibly involving certain format string specifiers.

The get_input_token function in the SPNEGO implementation in MIT Kerberos 5 (aka krb5) 1.5 through 1.6.3 allows remote attackers to cause a denial of service (daemon crash) and possibly obtain sensitive information via a crafted length value that triggers a buffer over-read.

Stack-based buffer overflow in the svcauth_gss_validate function in lib/rpc/svc_auth_gss.c in the RPCSEC_GSS RPC library (librpcsecgss) in MIT Kerberos 5 (krb5) 1.4 through 1.6.2, as used by the Kerberos administration daemon (kadmind) and some third-party applications that use krb5, allows remote attackers to cause a denial of service (daemon crash) and probably execute arbitrary code via a long string in an RPC message.

The iakerb_gss_export_sec_context function in lib/gssapi/krb5/iakerb.c in MIT Kerberos 5 (aka krb5) 1.14 pre-release 2015-09-14 improperly accesses a certain pointer, which allows remote authenticated users to cause a denial of service (memory corruption) or possibly have unspecified other impact by interacting with an application that calls the gss_export_sec_context function. NOTE: this vulnerability exists because of an incorrect fix for CVE-2015-2696.

MIT Kerberos 5 (aka krb5) 1.7.x through 1.12.x before 1.12.2 allows remote attackers to cause a denial of service (buffer over-read or NULL pointer dereference, and application crash) by injecting invalid tokens into a GSSAPI application session.

Buffer overflow in the RPC library used by libgssrpc and kadmind in MIT Kerberos 5 (krb5) 1.4 through 1.6.3 allows remote attackers to execute arbitrary code by triggering a large number of open file descriptors.

Buffer overflow in the RPC library (lib/rpc/rpc_dtablesize.c) used by libgssrpc and kadmind in MIT Kerberos 5 (krb5) 1.2.2, and probably other versions before 1.3, when running on systems whose unistd.h does not define the FD_SETSIZE macro, allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code by triggering a large number of open file descriptors.

The original patch for CVE-2007-3999 in svc_auth_gss.c in the RPCSEC_GSS RPC library in MIT Kerberos 5 (krb5) 1.4 through 1.6.2, as used by the Kerberos administration daemon (kadmind) and other applications that use krb5, does not correctly check the buffer length in some environments and architectures, which might allow remote attackers to conduct a buffer overflow attack.

plugins/preauth/pkinit/pkinit_crypto_openssl.c in MIT Kerberos 5 (aka krb5) through 1.15.2 mishandles Distinguished Name (DN) fields, which allows remote attackers to execute arbitrary code or cause a denial of service (buffer overflow and application crash) in situations involving untrusted X.509 data, related to the get_matching_data and X509_NAME_oneline_ex functions. NOTE: this has security relevance only in use cases outside of the MIT Kerberos distribution, e.g., the use of get_matching_data in KDC certauth plugin code that is specific to Red Hat.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides UPnP services that are available on port 3480 and can also be accessed via port 80 using the url "/port_3480". It seems that the UPnP services provide "request_image" as one of the service actions for a normal user to retrieve an image from a camera that is controlled by the controller. It seems that the "res" (resolution) parameter passed in the query string is not sanitized and is stored on the stack which allows an attacker to overflow the buffer. The function "LU::Generic_IP_Camera_Manager::REQ_Image" is activated when the lu_request_image is passed as the "id" parameter in the query string. This function then calls "LU::Generic_IP_Camera_Manager::GetUrlFromArguments". This function retrieves all the parameters passed in the query string including "res" and then uses the value passed in it to fill up buffer using the sprintf function. However, the function in this case lacks a simple length check and as a result an attacker who is able to send more than 184 characters can easily overflow the values stored on the stack including the $RA value and thus execute code on the device.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides UPnP services that are available on port 3480 and can also be accessed via port 80 using the url "/port_3480". It seems that the UPnP services provide "request_image" as one of the service actions for a normal user to retrieve an image from a camera that is controlled by the controller. It seems that the "URL" parameter passed in the query string is not sanitized and is stored on the stack which allows an attacker to overflow the buffer. The function "LU::Generic_IP_Camera_Manager::REQ_Image" is activated when the lu_request_image is passed as the "id" parameter in query string. This function then calls "LU::Generic_IP_Camera_Manager::GetUrlFromArguments" and passes a "pointer" to the function where it will be allowed to store the value from the URL parameter. This pointer is passed as the second parameter $a2 to the function "LU::Generic_IP_Camera_Manager::GetUrlFromArguments". However, neither the callee or the caller in this case performs a simple length check and as a result an attacker who is able to send more than 1336 characters can easily overflow the values stored on the stack including the $RA value and thus execute code on the device.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability has been found in Linksys E1700 1.0.0.4.003. Affected by this issue is the function setSysAdm of the file /goform/setSysAdm. Such manipulation of the argument rm_port leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Linksys E1700 1.0.0.4.003. Affected by this vulnerability is the function setWan of the file /goform/setWan. This manipulation of the argument DeviceName/lanIp causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys E1700 1.0.0.4.003. This affects the function QoSSetup of the file /goform/QoSSetup. Performing manipulation of the argument ack_policy results in stack-based buffer overflow. The attack may be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

Buffer overflow in the glob implementation (glob.c) in libc in NetBSD-current before 20050914, NetBSD 2.* and 3.* before 20061203, and Apple Mac OS X before 2007-004, as used by the FTP daemon and tnftpd, allows remote authenticated users to execute arbitrary code via a long pathname that results from path expansion.

A buffer overflow vulnerability in "Add command" functionality exists in Flexense SyncBreeze Enterprise <= 10.3.14. The vulnerability can be triggered by an authenticated attacker who submits more than 5000 characters as the command name. It will cause termination of the SyncBreeze Enterprise server and possibly remote command execution with SYSTEM privilege.

Buffer overflow in logout.cgi in the Intelligent Platform Management Interface (IPMI) with firmware before 3.15 (SMT_X9_315) on Supermicro X9 generation motherboards allows remote authenticated users to execute arbitrary code via the SID parameter.

Buffer overflow in the SNMP implementation in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(5) and 6.x before 6.1(1) and MDS 9000 devices 4.x and 5.x before 5.2(5) allows remote authenticated users to execute arbitrary code via a crafted SNMP request, aka Bug ID CSCtx54822.

Multiple buffer overflows in FlashFXP.exe in FlashFXP 4.2 allow remote authenticated users to execute arbitrary code via a long unicode string to (1) TListbox or (2) TComboBox.

On Insteon Hub 2245-222 devices with firmware version 1012, specially crafted replies received from the PubNub service can cause buffer overflows on a global section overwriting arbitrary data. An attacker should impersonate PubNub and answer an HTTPS GET request to trigger this vulnerability. A strcpy overflows the buffer insteon_pubnub.channel_ad_r, which has a size of 16 bytes. An attacker can send an arbitrarily long "ad_r" parameter in order to exploit this vulnerability.

Multiple buffer overflows in (a) UltraVNC (aka Ultr@VNC) 1.0.1 and earlier and (b) tabbed_viewer 1.29 (1) allow user-assisted remote attackers to execute arbitrary code via a malicious server that sends a long string to a client that connects on TCP port 5900, which triggers an overflow in Log::ReallyPrint; and (2) allow remote attackers to cause a denial of service (server crash) via a long HTTP GET request to TCP port 5800, which triggers an overflow in VNCLog::ReallyPrint.

Stack-based buffer overflow in IBM Informix Dynamic Server (IDS) 11.50 before 11.50.xC9W2 and 11.70 before 11.70.xC5 allows remote authenticated users to execute arbitrary code via crafted arguments in a SET COLLATION statement.

Stack-based buffer overflow in the eap_do_notify function in eap.c in xsupplicant before 1.2.6, and possibly other versions, allows remote authenticated users to execute arbitrary code via unspecified vectors.

The VMX process in VMware ESXi 3.5 through 4.1 and ESX 3.5 through 4.1 does not properly handle RPC commands, which allows guest OS users to cause a denial of service (memory overwrite and process crash) or possibly execute arbitrary code on the host OS via vectors involving data pointers.

On Insteon Hub 2245-222 devices with firmware version 1012, specially crafted replies received from the PubNub service can cause buffer overflows on a global section overwriting arbitrary data. An attacker should impersonate PubNub and answer an HTTPS GET request to trigger this vulnerability. A strcpy overflows the buffer insteon_pubnub.channel_ak, which has a size of 16 bytes. An attacker can send an arbitrarily long "ak" parameter in order to exploit this vulnerability.

Stack-based buffer overflow in Oracle 9i and 10g allows remote attackers to execute arbitrary code via a long token in the text of a wrapped procedure.

Buffer overflow in the cuil component in Cisco Telepresence System Integrator C Series 4.x before TC4.2.0 allows remote authenticated users to cause a denial of service (endpoint reboot or process crash) or possibly execute arbitrary code via a long location parameter to the getxml program, aka Bug ID CSCtq46496.

Stack-based buffer overflow in lcfd.exe in Tivoli Endpoint in IBM Tivoli Management Framework 3.7.1, 4.1, 4.1.1, and 4.3.1 allows remote authenticated users to execute arbitrary code via a long opts field.

Multiple stack-based buffer overflows in TP-Link WR940N WiFi routers with hardware version 4 allow remote authenticated users to execute arbitrary code via the (1) ping_addr parameter to PingIframeRpm.htm or (2) dnsserver2 parameter to WanStaticIpV6CfgRpm.htm.

Multiple buffer overflows in Oracle 9i Database release 2, Release 1, 8i, 8.1.7, and 8.0.6 allow remote attackers to execute arbitrary code via (1) a long conversion string argument to the TO_TIMESTAMP_TZ function, (2) a long time zone argument to the TZ_OFFSET function, or (3) a long DIRECTORY parameter to the BFILENAME function.

Stack-based buffer overflow in Oracle Net Services for Oracle Database Server 9i release 2 and earlier allows attackers to execute arbitrary code via a "CREATE DATABASE LINK" query containing a connect string with a long USING parameter.

Stack-based buffer overflow in NWFTPD.NLM before 5.10.02 in the FTP server in Novell NetWare allows remote authenticated users to execute arbitrary code or cause a denial of service (abend) via a long DELE command, a different vulnerability than CVE-2010-0625.4.

Stack-based buffer overflow in an unspecified logging function in oninit.exe in IBM Informix Dynamic Server (IDS) 11.10 before 11.10.xC2W2 and 11.50 before 11.50.xC1 allows remote authenticated users to execute arbitrary code via a crafted EXPLAIN directive, aka idsdb00154125 and idsdb00154243.

Stack-based buffer overflow in the IMAP server component in GroupWise Internet Agent (GWIA) in Novell GroupWise 7.x before 7.0 post-SP4 FTF and 8.x before 8.0 SP2 allows remote attackers to execute arbitrary code via a long mailbox name in a CREATE command.

Multiple stack-based buffer overflows in the jclient._Java_novell_jclient_JClient_defineClass@20 function in jclient.dll in the Tomcat web server in Novell iManager 2.7, 2.7.3, and 2.7.3 FTF2 allow remote authenticated users to execute arbitrary code via the (1) EnteredClassID or (2) NewClassName parameter to nps/servlet/webacc.

Heap-based buffer overflow in the Local Security Authority Subsystem Service (LSASS), as used in Active Directory in Microsoft Windows Server 2003 SP2 and Windows Server 2008 Gold, SP2, and R2; Active Directory Application Mode (ADAM) in Windows XP SP2 and SP3 and Windows Server 2003 SP2; and Active Directory Lightweight Directory Service (AD LDS) in Windows Vista SP2, Windows Server 2008 Gold, SP2, and R2, and Windows 7, allows remote authenticated users to execute arbitrary code via malformed LDAP messages, aka "LSASS Heap Overflow Vulnerability."

Stack-based buffer overflow in the dhost module in Novell eDirectory 8.8 SP5 for Windows allows remote authenticated users to execute arbitrary code via long sadminpwd and verifypwd parameters in a submit action to /dhost/httpstk.

Stack-based buffer overflow in the dhost module in Novell eDirectory 8.8 SP5 for Windows allows remote authenticated users to cause a denial of service (dhost.exe crash) and possibly execute arbitrary code via a long string to /dhost/modules?I:.

Stack-based buffer overflow in the File System Manager for EMC DiskXtender 6.20.060 allows remote authenticated users to execute arbitrary code via a crafted request to the RPC interface.

Stack-based buffer overflow in the IMAP service in NetWin SurgeMail 38k4-4 and earlier allows remote authenticated users to execute arbitrary code via long arguments to the LSUB command.