Yamaha LTE VoIP Router(NVR700W firmware Rev.15.00.15 and earlier), Yamaha Gigabit VoIP Router(NVR510 firmware Rev.15.01.14 and earlier), Yamaha Gigabit VPN Router(RTX810 firmware Rev.11.01.33 and earlier, RTX830 firmware Rev.15.02.09 and earlier, RTX1200 firmware Rev.10.01.76 and earlier, RTX1210 firmware Rev.14.01.33 and earlier, RTX3500 firmware Rev.14.00.26 and earlier, and RTX5000 firmware Rev.14.00.26 and earlier), Yamaha Broadband VoIP Router(NVR500 firmware Rev.11.00.38 and earlier), and Yamaha Firewall(FWX120 firmware Rev.11.03.27 and earlier) allow remote attackers to cause a denial of service via unspecified vectors.

Yamaha RTX, RT, SRT, RTV, RTW, and RTA series routers with firmware 6.x through 10.x, and NEC IP38X series routers with firmware 6.x through 10.x, do not properly handle IP header options, which allows remote attackers to cause a denial of service (device reboot) via a crafted option that triggers access to an invalid memory location.

The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle (1) a loop between a dot1x enabled port and an open-authentication dot1x enabled port and (2) a loop between a dot1x enabled port and a non-dot1x port, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many Spanning Tree Protocol (STP) Bridge Protocol Data Unit (BPDU) frames, aka Bug ID CSCtq36327.

An incorrect "pair?" check in the Scheme "length" procedure results in an unsafe pointer dereference in all CHICKEN Scheme versions prior to 4.13, which allows an attacker to cause a denial of service by passing an improper list to an application that calls "length" on it.

The qemu-nbd server in QEMU (aka Quick Emulator), when built with the Network Block Device (NBD) Server support, allows remote attackers to cause a denial of service (segmentation fault and server crash) by leveraging failure to ensure that all initialization occurs before talking to a client in the nbd_negotiate function.

The NFSv2/NFSv3 server in the nfsd subsystem in the Linux kernel through 4.10.11 allows remote attackers to cause a denial of service (system crash) via a long RPC reply, related to net/sunrpc/svc.c, fs/nfsd/nfs3xdr.c, and fs/nfsd/nfsxdr.c.

XStream through 1.4.9, when a certain denyTypes workaround is not used, mishandles attempts to create an instance of the primitive type 'void' during unmarshalling, leading to a remote application crash, as demonstrated by an xstream.fromXML("<void/>") call.

The Bastet of some Huawei mobile phones with software of earlier than MHA-AL00BC00B231 versions has a DOS vulnerability due to the lack of parameter validation. An attacker may trick a user into installing a malicious APP. The APP can modify specific parameter to cause system reboot.

Palo Alto Networks Traps ESM Console before 3.4.4 allows attackers to cause a denial of service by leveraging improper validation of requests to revoke a Traps agent license.

Wi-Fi driver of Honor 5C and P9 Lite Huawei smart phones with software versions earlier than NEM-L21C432B351 and versions earlier than VNS-L21C10B381 has a DoS vulnerability. An attacker may trick a user into installing a malicious application and the application can access invalid address of driver to crash the system.

iSmartAlarm cube devices allow Denial of Service. Sending a SYN flood on port 12345 will freeze the "cube" and it will stop responding.

An issue was discovered in the simple_asn1 crate 0.6.0 before 0.6.1 for Rust. There is a panic if UTCTime data, supplied by a remote attacker, has a second character greater than 0x7f.

The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle an external loop between a pair of dot1x enabled ports, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many unicast EAPoL Protocol Data Units (PDUs), aka Bug ID CSCtq36336.

Installing a zero-permission Android application on certain Samsung Android devices with KK(4.4), L(5.0/5.1), and M(6.0) software can continually crash the system_server process in the Android OS. The zero-permission app will create an active install session for a separate app that it has embedded within it. The active install session of the embedded app is performed using the android.content.pm.PackageInstaller class and its nested classes in the Android API. The active install session will write the embedded APK file to the /data/app directory, but the app will not be installed since third-party applications cannot programmatically install apps. Samsung has modified AOSP in order to accelerate the parsing of APKs by introducing the com.android.server.pm.PackagePrefetcher class and its nested classes. These classes will parse the APKs present in the /data/app directory and other directories, even if the app is not actually installed. The embedded APK that was written to the /data/app directory via the active install session has a very large but valid AndroidManifest.xml file. Specifically, the AndroidManifest.xml file contains a very large string value for the name of a permission-tree that it declares. When system_server tries to parse the APK file of the embedded app from the active install session, it will crash due to an uncaught error (i.e., java.lang.OutOfMemoryError) or an uncaught exception (i.e., std::bad_alloc) because of memory constraints. The Samsung Android device will encounter a soft reboot due to a system_server crash, and this action will keep repeating since parsing the APKs in the /data/app directory as performed by the system_server process is part of the normal boot process. The Samsung ID is SVE-2016-6917.

Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

Affected devices don't process correctly certain special crafted packets sent to port 102/tcp, which could allow an attacker to cause a denial of service in the device.

Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

Next.js is a React framework. In versions of Next.js prior to 12.0.5 or 11.1.3, invalid or malformed URLs could lead to a server crash. In order to be affected by this issue, the deployment must use Next.js versions above 11.1.0 and below 12.0.5, Node.js above 15.0.0, and next start or a custom server. Deployments on Vercel are not affected, along with similar environments where invalid requests are filtered before reaching Next.js. Versions 12.0.5 and 11.1.3 contain patches for this issue.

An issue was discovered in YottaDB through r1.32 and V7.0-000. A lack of input validation in calls to eb_div in sr_port/eb_muldiv.c allows attackers to crash the application by performing a divide by zero.

Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

An issue was discovered in YottaDB through r1.32 and V7.0-000. A lack of input validation in calls to do_verify in sr_unix/do_verify.c allows attackers to attempt to jump to a NULL pointer by corrupting a function pointer.

Dell EMC Data Protection Central version 19.5 contains an Improper Input Validation Vulnerability. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to denial of service.

Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

The vibrator service in P9 Plus smart phones with software versions earlier before VIE-AL10C00B386 has DoS vulnerability. An attacker can tricks a user into installing a malicious application on the smart phone, and send given parameter to smart phone vibrator service interface to crash the system.

Affected devices don't process correctly certain special crafted packets sent to port 102/tcp, which could allow an attacker to cause a denial of service in the device.

P9 Plus smartphones with software earlier than VIE-AL10C00B352 versions have an input validation vulnerability in the touchscreen Driver. An attacker can tricks a user into installing a malicious application on the smart phone, and send given parameter to smart phone to crash the system.

A vulnerability in the Autonomic Networking Infrastructure (ANI) feature of Cisco IOS Software (15.4 through 15.6) and Cisco IOS XE Software (3.7 through 3.18, and 16) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation on certain crafted packets. An attacker could exploit this vulnerability by sending a crafted IPv6 packet to a device that is running a Cisco IOS Software or Cisco IOS XE Software release that supports the ANI feature. A device must meet two conditions to be affected by this vulnerability: (1) the device must be running a version of Cisco IOS Software or Cisco IOS XE Software that supports ANI (regardless of whether ANI is configured); and (2) the device must have a reachable IPv6 interface. An exploit could allow the attacker to cause the affected device to reload. Cisco Bug IDs: CSCvc42729.

An issue was discovered on Samsung mobile devices with M(6.0) software. SLocation can cause a system crash via a call to an API that is not implemented. The Samsung ID is SVE-2017-8285 (April 2017).

Pexip Infinity before 26.2 allows temporary remote Denial of Service (abort) because of missing call-setup input validation.

In handleRun of TextLine.java, there is a possible application crash due to improper input validation. This could lead to remote denial of service when processing Unicode with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-8.0 Android-8.1 Android-9 Android-10Android ID: A-140632678

An issue was discovered on Samsung mobile devices with N(7.0) software. The time service (aka Timaservice) allows a kernel panic. The Samsung ID is SVE-2017-8593 (May 2017).

Go before 1.16.10 and 1.17.x before 1.17.3 allows an archive/zip Reader.Open panic via a crafted ZIP archive containing an invalid name or an empty filename field.

PostGIS 2.x before 2.3.3, as used with PostgreSQL, allows remote attackers to cause a denial of service via crafted ST_AsX3D function input, as demonstrated by an abnormal server termination for "SELECT ST_AsX3D('LINESTRING EMPTY');" because empty geometries are mishandled.

Improper Input Validation vulnerability in Parquet-MR of Apache Parquet allows an attacker to DoS by malicious Parquet files. This issue affects Apache Parquet-MR version 1.9.0 and later versions.

Weborf before 0.12.5 is affected by a Denial of Service (DOS) due to malformed fields in HTTP.

Huawei Share function in P30 9.1.0.193(C00E190R2P1) smartphone has an insufficient input validation vulnerability. Attackers can exploit this vulnerability by sending crafted packets to the affected device. Successful exploit may cause the function will be disabled.

An issue was discovered in Fort before 1.6.3. A malicious RPKI repository that descends from a (trusted) Trust Anchor can serve (via rsync or RRDP) a signed object containing an empty signedAttributes field. Fort accesses the set's elements without sanitizing it first. Because Fort is an RPKI Relying Party, a crash can lead to Route Origin Validation unavailability, which can lead to compromised routing.

Apache Tomcat 8.5.0 to 8.5.63, 9.0.0-M1 to 9.0.43 and 10.0.0-M1 to 10.0.2 did not properly validate incoming TLS packets. When Tomcat was configured to use NIO+OpenSSL or NIO2+OpenSSL for TLS, a specially crafted packet could be used to trigger an infinite loop resulting in a denial of service.

In FreeBSD 12.0-STABLE before r350828, 12.0-RELEASE before 12.0-RELEASE-p10, 11.3-STABLE before r350829, 11.3-RELEASE before 11.3-RELEASE-p3, and 11.2-RELEASE before 11.2-RELEASE-p14, a missing check in the function to arrange data in a chain of mbufs could cause data returned not to be contiguous. Extra checks in the IPv6 stack could catch the error condition and trigger a kernel panic, leading to a remote denial of service.

In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, changing the TensorFlow's `SavedModel` protocol buffer and altering the name of required keys results in segfaults and data corruption while loading the model. This can cause a denial of service in products using `tensorflow-serving` or other inference-as-a-service installments. Fixed were added in commits f760f88b4267d981e13f4b302c437ae800445968 and fcfef195637c6e365577829c4d67681695956e7d (both going into TensorFlow 2.2.0 and 2.3.0 but not yet backported to earlier versions). However, this was not enough, as #41097 reports a different failure mode. The issue is patched in commit adf095206f25471e864a8e63a0f1caef53a0e3a6, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

MediaTek microchips, as used in NETGEAR devices through 2021-12-13 and other devices, mishandle attempts at Wi-Fi authentication flooding. (Affected Chipsets MT7603E, MT7612, MT7613, MT7615, MT7622, MT7628, MT7629, MT7915; Affected Software Versions 7.4.0.0).

A vulnerability in the implementation of the PROFINET Discovery and Configuration Protocol (PN-DCP) for Cisco IOS 12.2 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper parsing of ingress PN-DCP Identify Request packets destined to an affected device. An attacker could exploit this vulnerability by sending a crafted PN-DCP Identify Request packet to an affected device and then continuing to send normal PN-DCP Identify Request packets to the device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are configured to process PROFINET messages. Beginning with Cisco IOS Software Release 12.2(52)SE, PROFINET is enabled by default on all the base switch module and expansion-unit Ethernet ports. Cisco Bug IDs: CSCuz47179.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. When handling SRTP calls, FreeSWITCH prior to version 1.10.7 is susceptible to a DoS where calls can be terminated by remote attackers. This attack can be done continuously, thus denying encrypted calls during the attack. When a media port that is handling SRTP traffic is flooded with a specially crafted SRTP packet, the call is terminated leading to denial of service. This issue was reproduced when using the SDES key exchange mechanism in a SIP environment as well as when using the DTLS key exchange mechanism in a WebRTC environment. The call disconnection occurs due to line 6331 in the source file `switch_rtp.c`, which disconnects the call when the total number of SRTP errors reach a hard-coded threshold (100). By abusing this vulnerability, an attacker is able to disconnect any ongoing calls that are using SRTP. The attack does not require authentication or any special foothold in the caller's or the callee's network. This issue is patched in version 1.10.7.

An issue was discovered on D-Link DIR-605L Model B before FW2.11betaB06_hbrf devices, related to the code that handles the authentication values for HNAP. An attacker can cause a denial of service (device crash) or possibly have unspecified other impact by sending a sufficiently long string in the password field of the HTTP Basic Authentication section of the HTTP request.

A denial of service vulnerability exists in the cgiserver.cgi API command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted series of HTTP requests can lead to denial of service. An attacker can send an HTTP request to trigger this vulnerability.