A flaw was found in the way signature calculation was handled by cephx authentication protocol. An attacker having access to ceph cluster network who is able to alter the message payload was able to bypass signature checks done by cephx protocol. Ceph branches master, mimic, luminous and jewel are believed to be vulnerable.

It was found that cephx authentication protocol did not verify ceph clients correctly and was vulnerable to replay attack. Any attacker having access to ceph cluster network who is able to sniff packets on network can use this vulnerability to authenticate with ceph service and perform actions allowed by ceph service. Ceph branches master, mimic, luminous and jewel are believed to be vulnerable.

An authentication bypass flaw has been found in PackageKit before 1.1.10 that allows users without administrator privileges to install signed packages. A local attacker can use this vulnerability to install vulnerable packages to further compromise a system.

A flaw was found in the way ceph mon handles user requests. Any authenticated ceph user having read access to ceph can delete, create ceph storage pools and corrupt snapshot images. Ceph branches master, mimic, luminous and jewel are believed to be affected.

An issue was discovered in WildFly 10.1.2.Final. In the case of a default installation without a security realm reference, an attacker can successfully access the server without authentication. NOTE: the Security Realms documentation in the product's Admin Guide indicates that "without a security realm reference" implies "effectively unsecured." The vendor explicitly supports these unsecured configurations because they have valid use cases during development

The SAML broker consumer endpoint in Keycloak before version 4.6.0.Final ignores expiration conditions on SAML assertions. An attacker can exploit this vulnerability to perform a replay attack.

Istio versions 1.2.10 (End of Life) and prior, 1.3 through 1.3.7, and 1.4 through 1.4.3 allows authentication bypass. The Authentication Policy exact-path matching logic can allow unauthorized access to HTTP paths even if they are configured to be only accessed after presenting a valid JWT token. For example, an attacker can add a ? or # character to a URI that would otherwise satisfy an exact-path match.

An authentication bypass flaw was found in the way krb5's certauth interface before 1.16.1 handled the validation of client certificates. A remote attacker able to communicate with the KDC could potentially use this flaw to impersonate arbitrary principals under rare and erroneous circumstances.

A vulnerability was found in the Linux kernel’s cgroup_release_agent_write in the kernel/cgroup/cgroup-v1.c function. This flaw, under certain circumstances, allows the use of the cgroups v1 release_agent feature to escalate privileges and bypass the namespace isolation unexpectedly.

In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26, use of the ap_get_basic_auth_pw() by third-party modules outside of the authentication phase may lead to authentication requirements being bypassed.

A flaw was found in shadow-utils. When asking for a new password, shadow-utils asks the password twice. If the password fails on the second attempt, shadow-utils fails in cleaning the buffer used to store the first entry. This may allow an attacker with enough access to retrieve the password from the memory.

It was found that the REST API in Infinispan before version 9.0.0 did not properly enforce auth constraints. An attacker could use this vulnerability to read or modify data in the default cache or a known cache name.

A flaw was found in keycloak in versions prior to 13.0.0. The client registration endpoint allows fetching information about PUBLIC clients (like client secret) without authentication which could be an issue if the same PUBLIC client changed to CONFIDENTIAL later. The highest threat from this vulnerability is to data confidentiality.

A flaw was found in the way Samba, as an Active Directory Domain Controller, implemented Kerberos name-based authentication. The Samba AD DC, could become confused about the user a ticket represents if it did not strictly require a Kerberos PAC and always use the SIDs found within. The result could include total domain compromise.

A flaw was found in the reset credential flow in all Keycloak versions before 8.0.0. This flaw allows an attacker to gain unauthorized access to the application.

A vulnerability was found in the 389 Directory Server that allows expired passwords to access the database to cause improper authentication.

The default configuration in the standalone controller quickstack manifest in openstack-foreman-installer, as used in Red Hat Enterprise Linux OpenStack Platform 4.0, disables authentication for Qpid, which allows remote attackers to gain access by connecting to Qpid.

In ectd before versions 3.4.10 and 3.3.23, gateway TLS authentication is only applied to endpoints detected in DNS SRV records. When starting a gateway, TLS authentication will only be attempted on endpoints identified in DNS SRV records for a given domain, which occurs in the discoverEndpoints function. No authentication is performed against endpoints provided in the --endpoints flag. This has been fixed in versions 3.4.10 and 3.3.23 with improved documentation and deprecation of the functionality.

A flaw was found in JBoss EAP, where the authentication configuration is set-up using a legacy SecurityRealm, to delegate to a legacy PicketBox SecurityDomain, and then reloaded to admin-only mode. This flaw allows an attacker to perform a complete authentication bypass by using an arbitrary user and password. The highest threat to vulnerability is to system availability.

The default configuration of Red Hat JBoss Portal before 6.1.0 enables the JGroups diagnostics service with no authentication when a JGroups channel is started, which allows remote attackers to obtain sensitive information (diagnostics) by accessing the service.

The Inter-Satellite Sync (ISS) operation in Red Hat Network (RHN) Satellite 5.3, 5.4, and 5.5 does not properly check client "authenticity," which allows remote attackers to obtain channel content by skipping the initial authentication call.

Mozilla Firefox before 18.0, Firefox ESR 10.x before 10.0.12 and 17.x before 17.0.2, Thunderbird before 17.0.2, Thunderbird ESR 10.x before 10.0.12 and 17.x before 17.0.2, and SeaMonkey before 2.15 allow remote attackers to spoof the address bar via vectors involving authentication information in the userinfo field of a URL, in conjunction with a 204 (aka No Content) HTTP status code.

The GateIn Portal export/import gadget in JBoss Enterprise Portal Platform 5.2.2 does not properly check authentication when importing Zip files, which allows remote attackers to modify site contents, remove the site, or alter the access controls for portlets.

It was found that Keycloak oauth would permit an authenticated resource to obtain an access/refresh token pair from the authentication server, permitting indefinite usage in the case of permission revocation. An attacker on an already compromised resource could use this flaw to grant himself continued permissions and possibly conduct further attacks.

A flaw was found in all Openshift Enterprise versions using the openshift elasticsearch plugin. An attacker with knowledge of the given name used to authenticate and access Elasticsearch can later access it without the token, bypassing authentication. This attack also requires that the Elasticsearch be configured with an external route, and the data accessed is limited to the indices.

JGroups diagnostics service in JBoss Enterprise Portal Platform before 5.2.2, SOA Platform before 5.3.0, and BRMS Platform before 5.3.0, is enabled without authentication when started by the JGroups channel, which allows remote attackers in adjacent networks to read diagnostics information via a crafted IP multicast.

The servlets invoked by httpha-invoker in JBoss Enterprise Application Platform before 5.1.2, SOA Platform before 5.2.0, BRMS Platform before 5.3.0, and Portal Platform before 4.3 CP07 perform access control only for the GET and POST methods, which allow remote attackers to bypass authentication by sending a request with a different method. NOTE: this vulnerability exists because of a CVE-2010-0738 regression.

Cumin in Red Hat Enterprise Messaging, Realtime, and Grid (MRG) 2.0 records broker authentication credentials in a log file, which allows local users to bypass authentication and perform unauthorized actions on jobs and message queues via a direct connection to the broker.

IBM Robotic Process Automation 21.0.0 through 21.0.7.6 and 23.0.0 through 23.0.6 is vulnerable to client side validation bypass which could allow invalid changes or values in some fields. IBM X-Force ID: 259380.

A flaw was found in keycloak, where the default ECP binding flow allows other authentication flows to be bypassed. By exploiting this behavior, an attacker can bypass the MFA authentication by sending a SOAP request with an AuthnRequest and Authorization header with the user's credentials. The highest threat from this vulnerability is to confidentiality and integrity.

XScreenSaver 4.10, when using a remote directory service for credentials, does not properly handle the results from the getpwuid function in drivers/lock.c when there is no network connectivity, which causes XScreenSaver to crash and unlock the screen and allows local users to bypass authentication.

A vulnerability was found in libssh, where the authentication check of the connecting client can be bypassed in the`pki_verify_data_signature` function in memory allocation problems. This issue may happen if there is insufficient memory or the memory usage is limited. The problem is caused by the return value `rc,` which is initialized to SSH_ERROR and later rewritten to save the return value of the function call `pki_key_check_hash_compatible.` The value of the variable is not changed between this point and the cryptographic verification. Therefore any error between them calls `goto error` returning SSH_OK.

A flaw was found in the Network Observability plugin for OpenShift console. Unless the Loki authToken configuration is set to FORWARD mode, authentication is no longer enforced, allowing any user who can connect to the OpenShift Console in an OpenShift cluster to retrieve flows without authentication.

A flaw was found in Keycloak. This vulnerability allows anyone to register a new security device or key when there is not a device already registered for any user by using the WebAuthn password-less login flow.

A flaw was found in Keycloak. The org.keycloak.authorization package may be vulnerable to circumventing required actions, allowing users to circumvent requirements such as setting up two-factor authentication.

A security flaw was found in Ansible Tower when requesting an OAuth2 token with an OAuth2 application. Ansible Tower uses the token to provide authentication. This flaw allows an attacker to obtain a refresh token that does not expire. The original token granted to the user still has access to Ansible Tower, which allows any user that can gain access to the token to be fully authenticated to Ansible Tower. This flaw affects Ansible Tower versions before 3.6.4 and Ansible Tower versions before 3.5.6.

It was found that the keycloak before 2.3.0 did not implement authentication flow correctly. An attacker could use this flaw to construct a phishing URL, from which he could hijack the user's session. This could lead to information disclosure, or permit further possible attacks.

etcd versions 3.2.x before 3.2.26 and 3.3.x before 3.3.11 are vulnerable to an improper authentication issue when role-based access control (RBAC) is used and client-cert-auth is enabled. If an etcd client server TLS certificate contains a Common Name (CN) which matches a valid RBAC username, a remote attacker may authenticate as that user with any valid (trusted) client certificate in a REST API request to the gRPC-gateway.

A flaw was found in the way samba implemented SMB1 authentication. An attacker could use this flaw to retrieve the plaintext password sent over the wire even if Kerberos authentication was required.

A flaw was found in Keycloaks OpenID Connect user authentication, which may incorrectly authenticate requests. An authenticated attacker who could obtain information from a user request within the same realm could use that data to impersonate the victim and generate new session tokens. This issue could impact confidentiality, integrity, and availability.

It was found that Samba before versions 4.5.3, 4.4.8, 4.3.13 always requested forwardable tickets when using Kerberos authentication. A service to which Samba authenticated using Kerberos could subsequently use the ticket to impersonate Samba to other services or domain users.

The openshift-origin-broker in Red Hat OpenShift Enterprise 2.0.5, 1.2.7, and earlier does not properly handle authentication requests from the remote-user auth plugin, which allows remote attackers to bypass authentication and impersonate arbitrary users via the X-Remote-User header in a request to a passthrough trigger.

Candlepin in Red Hat Subscription Asset Manager 1.0 through 1.3 uses a weak authentication scheme when the configuration file does not specify a scheme, which has unspecified impact and attack vectors.

The mirroring support (-M, --use-mirrors) in Python Pip before 1.5 uses insecure DNS querying and authenticity checks which allows attackers to perform man-in-the-middle attacks.

A key length flaw was found in Red Hat Ceph Storage. An attacker can exploit the fact that the key length is incorrectly passed in an encryption algorithm to create a non random key, which is weaker and can be exploited for loss of confidentiality and integrity on encrypted disks.

A vulnerability was found in keycloak 7.x, when keycloak is configured with LDAP user federation and StartTLS is used instead of SSL/TLS from the LDAP server (ldaps), in this case user authentication succeeds even if invalid password has entered.

A vulnerability was found in mod_auth_mellon before v0.14.2. If Apache is configured as a reverse proxy and mod_auth_mellon is configured to only let through authenticated users (with the require valid-user directive), adding special HTTP headers that are normally used to start the special SAML ECP (non-browser based) can be used to bypass authentication.

A vulnerability exists in the garbage collection mechanism of atomic-openshift. An attacker able spoof the UUID of a valid object from another namespace is able to delete children of those objects. Versions 3.6, 3.7, 3.8, 3.9, 3.10, 3.11 and 4.1 are affected.

A vulnerability was discovered in gdm before 3.31.4. When timed login is enabled in configuration, an attacker could bypass the lock screen by selecting the timed login user and waiting for the timer to expire, at which time they would gain access to the logged-in user's session.