Check Point VPN-1/FireWall-1 4.1 and earlier allows remote attackers to redirect FTP connections to other servers ("FTP Bounce") via invalid FTP commands that are processed improperly by FireWall-1, aka "FTP Connection Enforcement Bypass."

Check Point Session Authentication Agent allows remote attackers to obtain sensitive information (user credentials) via unspecified vectors.

Directory traversal vulnerability in Check Point Firewall-1 R55W before HFA03 allows remote attackers to read arbitrary files via an encoded .. (dot dot) in the URL on TCP port 18264.

Check Point FireWall-1 4.0 and 4.1 before SP5 allows remote attackers to obtain the IP addresses of internal interfaces via certain SecuRemote requests to TCP ports 256 or 264, which leaks the IP addresses in a reply packet.

Nokia Firewall Appliances running IPSO 3.3 and VPN-1/FireWall-1 4.1 Service Pack 3, IPSO 3.4 and VPN-1/FireWall-1 4.1 Service Pack 4, and IPSO 3.4 or IPSO 3.4.1 and VPN-1/FireWall-1 4.1 Service Pack 5, when SYN Defender is configured in Active Gateway mode, does not properly rewrite the third packet of a TCP three-way handshake to use the NAT IP address, which allows remote attackers to gain sensitive information.

The default configuration of SecuRemote for Check Point Firewall-1 allows remote attackers to obtain sensitive configuration information for the protected network without authentication.

The client authentication interface for Check Point Firewall-1 4.0 and earlier generates different error messages for invalid usernames versus invalid passwords, which allows remote attackers to identify valid usernames on the firewall.

Firewall-1 3.0 and 4.0 leaks packets with private IP address information, which could allow remote attackers to determine the real IP address of the host that is making the connection.

The design of the Internet Key Exchange (IKE) protocol, when using Aggressive Mode for shared secret authentication, does not encrypt initiator or responder identities during negotiation, which may allow remote attackers to determine valid usernames by (1) monitoring responses before the password is supplied or (2) sniffing, as originally reported for FireWall-1 SecuRemote.

Check Point VPN-1 4.1SP4 using SecuRemote returns different error messages for valid and invalid users, with prompts that vary depending on the authentication method being used, which makes it easier for remote attackers to conduct brute force attacks.

SSL Network Extender Client for Linux before build 800008302 reveals part of the contents of the configuration file supplied, which allows partially disclosing files to which the user did not have access.

Log files uploaded during troubleshooting by the Harmony SASE agent may have been accessible to unauthorized parties.

Potentially allowing an attacker to read certain information on Check Point Security Gateways once connected to the internet and enabled with remote Access VPN or Mobile Access Software Blades. A Security fix that mitigates this vulnerability is available.

A CWE-200: Exposure of Sensitive Information to an Unauthorized Actor vulnerability exists in Modicon X80 BMXNOR0200H RTU SV1.70 IR22 and prior that could cause information leak concerning the current RTU configuration including communication parameters dedicated to telemetry, when a specially crafted HTTP request is sent to the web server of the module.

The is_cgi method in CGIHTTPServer.py in the CGIHTTPServer module in Python 2.5, 2.6, and 3.0 allows remote attackers to read script source code via an HTTP GET request that lacks a / (slash) character at the beginning of the URI.

CFNetwork in Apple Mac OS X 10.6.3 and 10.6.4 supports anonymous SSL and TLS connections, which allows man-in-the-middle attackers to redirect a connection and obtain sensitive information via crafted responses.

An issue was discovered on Samsung mobile devices with N(7.x) (MediaTek chipsets) software. There is information disclosure (of kernel stack memory) in a MediaTek driver. The Samsung ID is SVE-2018-11852 (July 2018).

download.aspx in Douran Portal 3.9.7.8 allows remote attackers to obtain source code of arbitrary files under the web root via (1) a trailing ".", (2) a trailing space, or (3) mixed case in the FileNameAttach parameter.

Plone 3.3 through 5.1a1 allows remote attackers to obtain information about the ID of sensitive content via unspecified vectors.

An information exposure issue where IPv6 DNS traffic would be sent outside of the VPN tunnel (when Traffic Enforcement was enabled) exists in Pulse Secure Pulse Secure Desktop 9.0R1 and below. This is applicable only to dual-stack (IPv4/IPv6) endpoints.

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.x) software. There is a Keyboard learned words leak in the locked state via the emergency contact picker. The Samsung IDs are SVE-2018-11989, SVE-2018-11990 (September 2018).

The Research In Motion (RIM) BlackBerry Torch 9800 with firmware 6.0.0.246 allows attackers to read the contents of memory locations via unknown vectors, as demonstrated by Vincenzo Iozzo, Willem Pinckaers, and Ralf-Philipp Weinmann during a Pwn2Own competition at CanSecWest 2011.

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.x) software. There is Clipboard content visibility in the locked state via the emergency contact picker. The Samsung ID is SVE-2018-11806 (September 2018).

The Web Workers implementation in Google Chrome before 10.0.648.127 allows remote attackers to bypass the Same Origin Policy via unspecified vectors, related to an "error message leak."

The PlushSearch2 function in Search.php in Simple Machines Forum (SMF) before 1.1.13, and 2.x before 2.0 RC5, uses certain cached data in a situation where a temporary table has been created, even though this cached data is intended only for situations where a temporary table has not been created, which might allow remote attackers to obtain sensitive information via a search.

An issue was discovered on Samsung mobile devices with M(6.0) software. There is an information disclosure in a Trustlet because an address is logged. The Samsung ID is SVE-2018-11600 (July 2018).

The stateless address autoconfiguration (aka SLAAC) functionality in the IPv6 networking implementation in Apple iOS before 4.3 and Apple TV before 4.2 places the MAC address into the IPv6 address, which makes it easier for remote IPv6 servers to track users by logging source IPv6 addresses.

HP Discovery & Dependency Mapping Inventory (DDMI) 7.50, 7.51, 7.60, 7.61, 7.70, and 9.30 launches the Windows SNMP service with its default configuration, which allows remote attackers to obtain potentially sensitive information or have unspecified other impact by leveraging the public read community.

A vulnerability in Hitachi Command Suite 7.x and 8.x before 8.6.5-00 allows an unauthenticated remote user to read internal information.

A CWE-200: Information Exposure vulnerability exists in EVlink City (EVC1S22P4 / EVC1S7P4 all versions prior to R8 V3.4.0.1), EVlink Parking (EVW2 / EVF2 / EV.2 all versions prior to R8 V3.4.0.1), and EVlink Smart Wallbox (EVB1A all versions prior to R8 V3.4.0.1 ) that could allow an attacker to get limited knowledge of javascript code when crafted malicious parameters are submitted to the charging station web server.

A vulnerability classified as problematic has been found in Amcrest IP2M-841B, IP2M-841W, IPC-IP2M-841B, IPC-IP3M-943B, IPC-IP3M-943S, IPC-IP3M-HX2B and IPC-IPM-721S up to 20241211. This affects an unknown part of the file /web_caps/webCapsConfig of the component Web Interface. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An information disclosure vulnerability exists in the Rocket.Chat server fixed v3.13, v3.12.2 & v3.11.3 that allowed email addresses to be disclosed by enumeration and validation checks.

pivotx/modules/module_image.php in PivotX 2.2.2 allows remote attackers to obtain sensitive information via a non-existent file in the image parameter, which reveals the installation path in an error message. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information.

The from method in library/core/class.email.php in Vanilla Forums before 2.3.1 allows remote attackers to spoof the email domain in sent messages and potentially obtain sensitive information via a crafted HTTP Host header, as demonstrated by a password reset request.

PivotX before 2.2.2 allows remote attackers to obtain sensitive information via a direct request to (1) includes/ping.php and (2) includes/spamping.php, which reveals the installation path in an error message.

An issue was discovered on Samsung mobile devices with M(6.0), N(7.x), and O(8.0) (Exynos or Qualcomm chipsets) software. There is information disclosure (of a kernel address) via trustonic_tee. The Samsung ID is SVE-2017-11175 (February 2018).

A CWE-200: Information Exposure vulnerability exists which could cause the troubleshooting archive to be accessed. Affected Products: 1-Phase Uninterruptible Power Supply (UPS) using NMC2 including Smart-UPS, Symmetra, and Galaxy 3500 with Network Management Card 2 (NMC2): AP9630/AP9630CH/AP9630J, AP9631/AP9631CH/AP9631J, AP9635/AP9635J (NMC2 AOS V6.9.8 and earlier), 3-Phase Uninterruptible Power Supply (UPS) using NMC2 including Symmetra PX 250/500 (SYPX) Network Management Card 2 (NMC2): AP9630/AP9630CH/AP9630J, AP9631/AP9631CH/AP9631J, AP9635/AP9635J (NMC2 AOS V6.9.6 and earlier), 3-Phase Uninterruptible Power Supply (UPS) using NMC2 including Symmetra PX 48/96/100/160 kW UPS (PX2), Symmetra PX 20/40 kW UPS (SY3P), Gutor (SXW, GVX), and Galaxy (GVMTS, GVMSA, GVXTS, GVXSA, G7K, GFC, G9KCHU): AP9630/AP9630CH/AP9630J, AP9631/AP9631CH/AP9631J, AP9635/AP9635CH (NMC2 AOS V6.9.6 and earlier), 1-Phase Uninterruptible Power Supply (UPS) using NMC3 including Smart-UPS, Symmetra, and Galaxy 3500 with Network Management Card 3 (NMC3): AP9640/AP9640J, AP9641/AP9641J, AP9643/AP9643J (NMC3 AOS V1.4.2.1 and earlier), APC Rack Power Distribution Units (PDU) using NMC2 2G Metered/Switched Rack PDUs with embedded NMC2: AP84XX, AP86XX, AP88XX, AP89XX (NMC2 AOS V6.9.6 and earlier), APC Rack Power Distribution Units (PDU) using NMC3 2G Metered/Switched Rack PDUs with embedded NMC3: APDU99xx (NMC3 AOS V1.4.0 and earlier), APC 3-Phase Power Distribution Products using NMC2 Galaxy RPP: GRPPIP2X84 (NMC2 AOS V6.9.6 and earlier), Network Management Card 2 (NMC2) for InfraStruxure 150 kVA PDU with 84 Poles (X84P): PDPB150G6F (NMC2 AOS V6.9.6 and earlier), Network Management Card 2 for InfraStruxure 40/60kVA PDU (XPDU) PD40G6FK1-M, PD40F6FK1-M, PD40L6FK1-M, PDRPPNX10 M,PD60G6FK1, PD60F6FK1, PD60L6FK1, PDRPPNX10, PD40E5EK20-M, PD40H5EK20-M (NMC2 AOS V6.9.6 and earlier), Network Management Card 2 for Modular 150/175kVA PDU (XRDP): PDPM150G6F, PDPM150L6F, PDPM175G6H (NMC2 AOS V6.9.6 and earlier), Network Management Card 2 for 400 and 500 kVA (PMM): PMM400-ALA, PMM400-ALAX, PMM400-CUB, PMM500-ALA, PMM500-ALAX, PMM500-CUB (NMC2 AOS V6.9.6 and earlier), Network Management Card 2 for Modular PDU (XRDP2G): PDPM72F-5U, PDPM138H-5U, PDPM144F, PDPM138H-R, PDPM277H, PDPM288G6H (NMC2 AOS V6.9.6 and earlier), Rack Automatic Transfer Switches (ATS) Embedded NMC2: Rack Automatic Transfer Switches - AP44XX (ATS4G) (NMC2 AOS V6.9.6 and earlier), Network Management Card 2 (NMC2) Cooling Products: InRow Cooling for series ACRP5xx, ACRP1xx, ACRD5xx, and ACRC5xx SKUs (ACRP2G), InRow Cooling for series ACRC10x SKUs (RC10X2G), InRow Cooling for series ACRD6xx and ACRC6xx SKUs (ACRD2G), InRow Cooling Display for series ACRD3xx (ACRC2G), InRow Cooling for series ACSC1xx SKUs (SC2G), InRow Cooling for series ACRD1xx and ACRD2xx (ACRPTK2G), Ecoflair IAEC25/50 Air Economizer Display (EB2G), Uniflair SP UCF0481I, UCF0341I (UNFLRSP), Uniflair LE DX Perimeter Cooling Display for SKUs: IDAV, IDEV, IDWV, IUAV, IUEV, IUWV, IXAV, IXEV, IXWV, LDAV, LDEV, and LDWV (LEDX2G), Refrigerant Distribution Unit: ACDA9xx (RDU) (NMC2 AOS V6.9.6 and earlier), Environmental Monitoring Unit with embedded NMC2 (NB250): NetBotz NBRK0250 (NMC2 AOS V6.9.6 and earlier), and Network Management Card 2 (NMC2): AP9922 Battery Management System (BM4) (NMC2 AOS V6.9.6 and earlier)

Information leakage vulnerability in NetIQ Access Manager prior to 5.0.1 and 4.5.4

CFNetwork in Apple Mac OS X before 10.7.2 does not properly follow an intended cookie-storage policy, which makes it easier for remote web servers to track users via a cookie, related to a "synchronization issue."

An issue was discovered in S-CMS 1.0. It allows reading certain files, such as PHP source code, via the admin/download.php DownName parameter with a mixed-case extension, as demonstrated by a DownName=download.Php value.

The HTTPInput node in IBM WebSphere Message Broker 7.0 before 7.0.0.8 and 8.0 before 8.0.0.6 and IBM Integration Bus 9.0 before 9.0.0.4 allows remote attackers to obtain sensitive information by triggering a SOAP fault.

Opera before 11.00 does not clear WAP WML form fields after manual navigation to a new web site, which allows remote attackers to obtain sensitive information via an input field that has the same name as an input field on a previously visited web site.

IBM QRadar SIEM 7.2 and 7.3 discloses sensitive information to unauthorized users. The information can be used to mount further attacks on the system. IBM X-Force ID: 155346.

Graphics Device Interface (aka GDI or GDI+) in Microsoft Windows Vista SP2; Windows Server 2008 SP2 and R2 SP1; Windows 7 SP1; Windows 8.1; Windows Server 2012 Gold and R2; Windows RT 8.1; Windows 10 Gold, 1511, and 1607; Office 2007 SP3; Office 2010 SP2; Word Viewer; Skype for Business 2016; Lync 2013 SP1; Lync 2010; Lync 2010 Attendee; and Live Meeting 2007 Console allows remote attackers to bypass the ASLR protection mechanism via unspecified vectors, aka "GDI+ Information Disclosure Vulnerability," a different vulnerability than CVE-2016-3263.

Unspecified vulnerability in the mod_mono module for XSP in Mono 2.8.x before 2.8.2 allows remote attackers to obtain the source code for .aspx (ASP.NET) applications via unknown vectors related to an "unloading bug."

An issue was discovered in Netdata 1.10.0. Full Path Disclosure (FPD) exists via api/v1/alarms. NOTE: the vendor says "is intentional.

DamiCMS 6.0.1 allows remote attackers to read arbitrary files via a crafted admin.php?s=Tpl/Add/id request, as demonstrated by admin.php?s=Tpl/Add/id/.\Public\Config\config.ini.php to read the global configuration file.

In Spring Cloud OpenFeign 3.0.0 to 3.0.4, 2.2.0.RELEASE to 2.2.9.RELEASE, and older unsupported versions, applications using type-level `@RequestMapping`annotations over Feign client interfaces, can be involuntarily exposing endpoints corresponding to `@RequestMapping`-annotated interface methods.

Dojo Toolkit, as used in the Web client in IBM Rational ClearQuest 7.1.1.x before 7.1.1.4 and 7.1.2.x before 7.1.2.1, allows remote attackers to read cookies by navigating to a Dojo file, related to an "open direct" issue.

A CWE-200: Information Exposure vulnerability exists that could cause sensitive information of files located in the web root directory to leak when an attacker sends a HTTP request to the web server of the device. Affected Product: Modicon M340 CPUs: BMXP34 (Versions prior to V3.40), Modicon M340 X80 Ethernet Communication Modules: BMXNOE0100 (H), BMXNOE0110 (H), BMXNOC0401, BMXNOR0200H RTU (All Versions), Modicon Premium Processors with integrated Ethernet (Copro): TSXP574634, TSXP575634, TSXP576634 (All Versions), Modicon Quantum Processors with Integrated Ethernet (Copro): 140CPU65xxxxx (All Versions), Modicon Quantum Communication Modules: 140NOE771x1, 140NOC78x00, 140NOC77101 (All Versions), Modicon Premium Communication Modules: TSXETY4103, TSXETY5103 (All Versions)