An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'staticGet' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'staticGet <node_name attr>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

Stack-based buffer overflow in dws/api/Login on D-Link DIR-850L B1 2.07 before 2.07WWB05, DIR-817 Ax, DIR-818LW Bx before 2.05b03beta03, DIR-822 C1 3.01 before 3.01WWb02, DIR-823 A1 1.00 before 1.00WWb05, DIR-895L A1 1.11 before 1.11WWb04, DIR-890L A1 1.09 before 1.09b14, DIR-885L A1 1.11 before 1.11WWb07, DIR-880L A1 1.07 before 1.07WWb08, DIR-868L B1 2.03 before 2.03WWb01, and DIR-868L C1 3.00 before 3.00WWb01 devices allows remote attackers to execute arbitrary code via a long session cookie.

Stack-based buffer overflow in the SelectDirectory method in DcsCliCtrl.dll in Camera Stream Client ActiveX Control, as used in D-Link DCS-5605 PTZ IP Network Camera, allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a long string argument.

An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of setting a SMB folder for the video clippings recorded by the device. It seems that the POST parameters passed in this request (to test if email credentials and hostname sent to the device work properly) result in being passed as commands to a "system" API in the function and thus result in command injection on the device. If the firmware version is dissected using binwalk tool, we obtain a cramfs-root archive which contains the filesystem set up on the device that contains all the binaries. The library "libmailutils.so" is the one that has the vulnerable function "sub_1FC4" that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows an ARM little endian format. The function sub_1FC4 in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "receiver1" is extracted in function "sub_15AC" which is then passed to the vulnerable system API call. The vulnerable library function is accessed in "cgibox" binary at address 0x00023BCC which calls the "Send_mail" function in "libmailutils.so" binary as shown below which results in the vulnerable POST parameter being passed to the library which results in the command injection issue.

D-Link DIR-505L SharePort Mobile Companion 1.01 and DIR-826L Wireless N600 Cloud Router 1.02 allows remote attackers to bypass authentication via a direct request when an authorized session is active.

An issue was discovered on D-Link DIR-823G devices with firmware through 1.02B03. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body, such as a body of ' /bin/telnetd' for the GetDeviceSettingsset API function. Consequently, an attacker can execute any command remotely when they control this input.

D-Link DIR-615 devices have a buffer overflow via a long Authorization HTTP header.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'read' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'read <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'commit' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'commit <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device runs a custom daemon on UDP port 5978 which is called "dldps2121" and listens for broadcast packets sent on 255.255.255.255. This daemon handles custom D-Link UDP based protocol that allows D-Link mobile applications and desktop applications to discover D-Link devices on the local network. The binary processes the received UDP packets sent from any device in "main" function. One path in the function traverses towards a block of code that processing of packets which does an unbounded copy operation which allows to overflow the buffer. The custom protocol created by Dlink follows the following pattern: Packetlen, Type of packet; M=MAC address of device or broadcast; D=Device Type;C=base64 encoded command string;test=1111 We can see at address function starting at address 0x0000DBF8 handles the entire UDP packet and performs an insecure copy using strcpy function at address 0x0000DC88. This results in overflowing the stack pointer after 1060 characters and thus allows to control the PC register and results in code execution. The same form of communication can be initiated by any process including an attacker process on the mobile phone or the desktop and this allows a third-party application on the device to execute commands on the device without any authentication by sending just 1 UDP packet with custom base64 encoding.

D-Link EyeOn Baby Monitor (DCS-825L) 1.08.1 has a remote code execution vulnerability. A UDP "Discover" service, which provides multiple functions such as changing the passwords and getting basic information, was installed on the device. A remote attacker can send a crafted UDP request to finderd to perform stack overflow and execute arbitrary code with root privilege on the device.

Processing malformed SOAP messages when performing the HNAP Login action causes a buffer overflow in the stack in some D-Link DIR routers. The vulnerable XML fields within the SOAP body are: Action, Username, LoginPassword, and Captcha. The following products are affected: DIR-823, DIR-822, DIR-818L(W), DIR-895L, DIR-890L, DIR-885L, DIR-880L, DIR-868L, and DIR-850L.

A vulnerability has been found in D-Link DAP-1620 1.03 and classified as critical. This vulnerability affects the function mod_graph_auth_uri_handler of the file /storage of the component Authentication Handler. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Buffer overflow in D-Link DAP-2310 2.06 and earlier, DAP-2330 1.06 and earlier, DAP-2360 2.06 and earlier, DAP-2553 H/W ver. B1 3.05 and earlier, DAP-2660 1.11 and earlier, DAP-2690 3.15 and earlier, DAP-2695 1.16 and earlier, DAP-3320 1.00 and earlier, and DAP-3662 1.01 and earlier allows remote attackers to have unspecified impact via a crafted 'dlink_uid' cookie.

A vulnerability was found in D-Link DCS-932L 2.18.01 and classified as critical. Affected by this issue is the function sub_404780 of the file /bin/gpio. The manipulation of the argument CameraName leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been declared as critical. This vulnerability affects the function formSetPortTr of the file /goform/formSetPortTr. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been classified as critical. This affects the function formResetStatistic of the file /goform/formResetStatistic. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been declared as critical. Affected by this vulnerability is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been rated as critical. Affected by this issue is the function dbsrv_asp of the file /dbsrv.asp. The manipulation of the argument str leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

Multiple buffer overflows in the web interface on the D-Link DI-524 router allow remote attackers to cause a denial of service (device crash) or possibly have unspecified other impact via (1) a long username or (2) an HTTP header with a large name and an empty value.

Stack-based buffer overflow in the DIR-645 Wired/Wireless Router Rev. Ax with firmware 1.04b12 and earlier allows remote attackers to execute arbitrary code via a long string in a GetDeviceSettings action to the HNAP interface.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The binary orthrus in /sbin folder of the device handles all the UPnP connections received by the device. It seems that the binary performs a sprintf operation at address 0x0000A3E4 with the value in the command line parameter "-f" and stores it on the stack. Since there is no length check, this results in corrupting the registers for the function sub_A098 which results in memory corruption.

Stack-based buffer overflow in login_mgr.cgi in D-Link firmware DNR-320L and DNS-320LW before 1.04b08, DNR-322L before 2.10 build 03, DNR-326 before 2.10 build 03, and DNS-327L before 1.04b01 allows remote attackers to execute arbitrary code by crafting malformed "Host" and "Referer" header values.

Buffer overflow in ACME micro_httpd, as used in D-Link DSL2750U and DSL2740U and NetGear WGR614 and MR-ADSL-DG834 routers allows remote attackers to cause a denial of service (crash) via a long string in the URI in a GET request.

Stack-based buffer overflow in the do_hnap function in www/my_cgi.cgi in D-Link DSP-W215 (Rev. A1) with firmware 1.01b06 and earlier, DIR-505 with firmware before 1.08b10, and DIR-505L with firmware 1.01 and earlier allows remote attackers to execute arbitrary code via a long Content-Length header in a GetDeviceSettings action in an HNAP request.

authentication.cgi on D-Link DIR-868L devices with Singapore StarHub firmware before v1.21SHCb03 allows remote attackers to execute arbitrary code.

Stack-based buffer overflow in the RuntimeDiagnosticPing function in /bin/webs on D-Link DIR-100 routers might allow remote authenticated administrators to execute arbitrary commands via a long set/runtime/diagnostic/pingIp parameter to Tools/tools_misc.xgi.

A vulnerability was found in D-Link DIR-513 up to 1.10 and classified as critical. This issue affects the function formSetWanL2TPcallback of the file /goform/formSetWanL2TPtriggers of the component HTTP POST Request Handler. The manipulation leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was identified in D-Link DIR-825 2.10. Affected by this vulnerability is the function get_ping_app_stat of the file ping_response.cgi of the component httpd. The manipulation of the argument ping_ipaddr leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Buffer overflow in the SSH server functionality on the D-Link DES-3800 with firmware before 4.50B052, DWL-2100AP with firmware before 2.50RC548, and DWL-3200AP with firmware before 2.55RC549 allows remote attackers to execute arbitrary code or cause a denial of service via unspecified vectors.

A vulnerability was found in D-Link DIR-513 1.10. It has been rated as critical. Affected by this issue is the function websAspInit of the file /goform/formSetWanPPPoE. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical has been found in D-Link DIR-513 1.10. This affects the function formSetWanPPTPcallback of the file /goform/formSetWanPPTPpath of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DI-8100 16.07.26A1. This issue affects some unknown processing of the file /menu_nat_more.asp of the component HTTP Request Handler. The manipulation leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DI-8100 16.07.26A1. It has been classified as critical. This affects an unknown part of the file /menu_nat.asp of the component HTTP Request Handler. The manipulation of the argument out_addr/in_addr/out_port/proto leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in D-Link DIR-825 2.10. This issue affects the function sub_410DDC of the file switch_language.cgi of the component httpd. The manipulation of the argument Language leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DI-8100 16.07.21. It has been rated as critical. Affected by this issue is some unknown functionality of the file /pppoe_base.asp of the component jhttpd. The manipulation of the argument mschap_en leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in D-Link DI-8100 1.0. This vulnerability affects the function sprintf of the file /upnp_ctrl.asp of the component jhttpd. The manipulation of the argument remove_ext_proto/remove_ext_port leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DI-500WF 17.04.10A1T. It has been declared as critical. Affected by this vulnerability is the function sprintf of the file ip_position.asp of the component jhttpd. The manipulation of the argument ip leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in D-Link DIR-513 1.0. This affects an unknown part of the file /goform/formSetWanPPTP. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-619L 2.06B01 and classified as critical. This issue affects the function formAdvanceSetup of the file /goform/formAdvanceSetup. The manipulation of the argument webpage leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DIR-619L 2.06B01. Affected by this issue is the function formSetWANType_Wizard5 of the file /goform/formSetWANType_Wizard5. The manipulation of the argument curTime leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-815 1.01. It has been declared as critical. This vulnerability affects the function sub_403794 of the file hedwig.cgi. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in D-Link DIR-665 1.00. This affects the function sub_AC78 of the component HTTP POST Request Handler. The manipulation leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-619L 2.06B01 and classified as critical. This vulnerability affects the function formSetWAN_Wizard51 of the file /goform/formSetWAN_Wizard51. The manipulation of the argument curTime leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DIR-632 FW103B08. Affected by this issue is the function get_pure_content of the component HTTP POST Request Handler. The manipulation of the argument Content-Length leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-867 1.0 and classified as critical. This vulnerability affects the function strncpy of the component Query String Handler. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-632 FW103B08. It has been declared as critical. This vulnerability affects the function do_file of the component HTTP POST Request Handler. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-632 FW103B08 and classified as critical. Affected by this vulnerability is the function FUN_00425fd8 of the file /biurl_grou of the component HTTP POST Request Handler. The manipulation leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, was found in D-Link DIR-619L 2.06B01. This affects the function formAutoDetecWAN_wizard4 of the file /goform/formAutoDetecWAN_wizard4. The manipulation of the argument curTime leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-816 1.10CNB05 and classified as critical. This vulnerability affects unknown code of the file /goform/form2lansetup.cgi. The manipulation of the argument ip leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.