Linksys WAP54Gv3 firmware 3.04.03 and earlier uses a hard-coded username (Gemtek) and password (gemtekswd) for a debug interface for certain web pages, which allows remote attackers to execute arbitrary commands via the (1) data1, (2) data2, or (3) data3 parameters to (a) Debug_command_page.asp and (b) debug.cgi.

Linksys WAP54Gv3 firmware 3.04.03 and earlier allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) data2 and (2) data3 parameters to (a) Debug_command_page.asp and (b) debug.cgi.

Unsanitized user input in the web interface for Linksys WiFi extender products (RE6400 and RE6300 through 1.2.04.022) allows for remote command execution. An attacker can access system OS configurations and commands that are not intended for use beyond the web UI.

Unspecified vulnerability in the SNMPv3 component in Linksys WAP4400N firmware 1.2.14 on the Marvell Semiconductor 88W8361P-BEM1 chipset has unknown impact and attack vectors, probably remote.

Linksys EA6500 has SMB Symlink Traversal allowing symbolic links to be created to locations outside of the Samba share.

The FTP server on the Linksys WRT54G 7 router with 7.00.1 firmware does not verify authentication credentials, which allows remote attackers to establish an FTP session by sending an arbitrary username and password.

The web interface on the Linksys WRT54g router with firmware 1.00.9 does not require credentials when invoking scripts, which allows remote attackers to perform arbitrary administrative actions via a direct request to (1) Advanced.tri, (2) AdvRoute.tri, (3) Basic.tri, (4) ctlog.tri, (5) ddns.tri, (6) dmz.tri, (7) factdefa.tri, (8) filter.tri, (9) fw.tri, (10) manage.tri, (11) ping.tri, (12) PortRange.tri, (13) ptrigger.tri, (14) qos.tri, (15) rstatus.tri, (16) tracert.tri, (17) vpn.tri, (18) WanMac.tri, (19) WBasic.tri, or (20) WFilter.tri. NOTE: the Security.tri vector is already covered by CVE-2006-5202.

Linksys EtherFast Cable/DSL BEFSR11, BEFSR41 and BEFSRU31 with the firmware 1.42.7 upgrade installed opens TCP port 5678 for remote administration even when the "Block WAN" and "Remote Admin" options are disabled, which allows remote attackers to gain access.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Linksys WVBR0. Authentication is not required to exploit this vulnerability. The specific flaw exists within the web management portal. The issue lies in the lack of proper validation of user data before executing a system call. An attacker could leverage this vulnerability to execute code with root privileges. Was ZDI-CAN-4892.

Belkin LINKSYS RE6500 devices before 1.0.012.001 allow remote attackers to execute arbitrary commands or set a new password via shell metacharacters to the goform/setSysAdm page.

Multiple buffer overflows in the Marvell wireless driver, as used in Linksys WAP4400N Wi-Fi access point with firmware 1.2.17 on the Marvell 88W8361P-BEM1 chipset, and other products, allow remote 802.11-authenticated users to cause a denial of service (wireless access point crash) and possibly execute arbitrary code via an association request with long (1) rates, (2) extended rates, and unspecified other information elements.

Stack-based buffer overflow in the Broadcom BCMWL5.SYS wireless device driver 3.50.21.10, as used in Cisco Linksys WPC300N Wireless-N Notebook Adapter before 4.100.15.5 and other products, allows remote attackers to execute arbitrary code via an 802.11 response frame containing a long SSID field.

Buffer overflow in the system log viewer of Linksys BEFSX41 1.44.3 allows remote attackers to cause a denial of service via an HTTP request with a long Log_Page_Num variable.

Heap-based buffer overflow in the HX_split function in string.c in libHX before 3.6 allows remote attackers to execute arbitrary code or cause a denial of service (application crash) via a string that is inconsistent with the expected number of fields.

Stack-based buffer overflow in the ASN.1 BER dissector in Wireshark 0.10.13 through 1.0.14 and 1.2.0 through 1.2.9 has unknown impact and remote attack vectors. NOTE: this issue exists because of a CVE-2010-2284 regression.

Google Chrome before 5.0.375.127 does not properly implement the Geolocation feature, which allows remote attackers to cause a denial of service (memory corruption) or possibly have unspecified other impact via unknown vectors.

Adobe Shockwave Player before 11.5.8.612 allows attackers to cause a denial of service (memory corruption) or possibly execute arbitrary code via unspecified vectors.

Google Chrome before 5.0.375.127 does not properly implement file dialogs, which allows attackers to cause a denial of service (memory corruption) or possibly have unspecified other impact via unknown vectors.

libvpx in mediaserver in Android 4.x before 4.4.4, 5.x before 5.1.1 LMY49H, and 6.0 before 2016-03-01 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via a crafted media file, related to libwebm/mkvparser.cpp and other files, aka internal bug 23452792.

Stack-based buffer overflow in the execvp_nc function in the ov.dll module in HP OpenView Network Node Manager (OV NNM) 7.51 and 7.53, when running on Windows, allows remote attackers to execute arbitrary code via a long HTTP request to webappmon.exe.

Buffer overflow in the GetDriverSettings function in nipplib.dll in Novell iPrint Client before 5.78 on Windows allows remote attackers to execute arbitrary code via a long realm field, a different vulnerability than CVE-2011-3173.

Multiple buffer overflows in fs/nfsd/nfs4xdr.c in the XDR implementation in the NFS server in the Linux kernel before 2.6.34-rc6 allow remote attackers to cause a denial of service (panic) or possibly execute arbitrary code via a crafted NFSv4 compound WRITE request, related to the read_buf and nfsd4_decode_compound functions.

libAACdec/src/aacdec_drc.cpp in mediaserver in Android 4.x before 4.4.4, 5.0.x before 5.0.2, 5.1.x before 5.1.1, and 6.x before 2016-05-01 does not properly limit the number of threads, which allows remote attackers to execute arbitrary code or cause a denial of service (stack memory corruption) via a crafted media file, aka internal bug 26751339.

Buffer overflow in the client connection routine of libDtSvc.so.1 in CDE Subprocess Control Service (dtspcd) allows remote attackers to execute arbitrary commands.

Array index error in GroupWise Internet Agent (GWIA) in Novell GroupWise 8.0 before HP3 allows remote attackers to execute arbitrary code via a crafted yearly RRULE variable in a VCALENDAR attachment in an e-mail message.

The implementation of notification permissions in Google Chrome before 6.0.472.53 allows attackers to cause a denial of service (memory corruption) or possibly have unspecified other impact via unknown vectors.

Buffer overflow in an unspecified string class in the WebGL shader implementation in Mozilla Firefox 4.x through 5, Thunderbird before 6, SeaMonkey 2.x before 2.3, and possibly other products allows remote attackers to execute arbitrary code or cause a denial of service (application crash) via a long source-code block for a shader.

Google Chrome before 6.0.472.59 does not properly implement Geolocation, which allows remote attackers to cause a denial of service (memory corruption) or possibly have unspecified other impact via unknown vectors.

WinSig.exe in eSignal 10.6.2425 and earlier allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via (1) a long StyleTemplate element in a QUO, SUM or POR file, which triggers a stack-based buffer overflow, or (2) a long Font->FaceName field (aka FaceName element), which triggers a heap-based buffer overflow. NOTE: some of these details are obtained from third party information.

A vulnerability was identified in INSTAR 2K+ and 4K 3.11.1 Build 1124. This affects the function base64_decode of the component fcgi_server. The manipulation of the argument Authorization leads to buffer overflow. It is possible to initiate the attack remotely.

Buffer overflow in Wyse ThinOS HF 4.4.079i, and possibly other versions before ThinOS 6.5, allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a long string to the LPD service.

Multiple stack-based buffer overflows in service.exe in Measuresoft ScadaPro 4.0.0 and earlier allow remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a long command to port 11234, as demonstrated with the TF command.

Multiple buffer overflows in the authentication functionality in the web-server module in Cisco CiscoWorks Common Services before 4.0 allow remote attackers to execute arbitrary code via a session on TCP port (1) 443 or (2) 1741, aka Bug ID CSCti41352.

Buffer overflow in HP OpenView Network Node Manager (OV NNM) 7.51 and 7.53 allows remote attackers to execute arbitrary code via a long HTTP request to nnmrptconfig.exe.

Heap-based buffer overflow in the encode_msg function in encode_msg.c in the SEAS module in Kamailio (formerly OpenSER and SER) before 4.3.5 allows remote attackers to cause a denial of service (memory corruption and process crash) or possibly execute arbitrary code via a large SIP packet.

Heap-based buffer overflow in httpsvr.exe 6.0.5.3 in Sunway ForceControl 6.1 SP1, SP2, and SP3 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a crafted URL.

Stack-based buffer overflow in the _OVParseLLA function in ov.dll in netmon.exe in Network Monitor in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allows remote attackers to execute arbitrary code via the sel parameter.

Adobe Acrobat and Reader versions , 2019.021.20056 and earlier, 2017.011.30152 and earlier, 2017.011.30155 and earlier version, 2017.011.30152 and earlier, and 2015.006.30505 and earlier have an untrusted pointer dereference vulnerability. Successful exploitation could lead to arbitrary code execution .

Adobe Reader and Acrobat before 11.0.16, Acrobat and Acrobat Reader DC Classic before 15.006.30172, and Acrobat and Acrobat Reader DC Continuous before 15.016.20039 on Windows and OS X allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2016-1037, CVE-2016-1063, CVE-2016-1064, CVE-2016-1071, CVE-2016-1072, CVE-2016-1073, CVE-2016-1074, CVE-2016-1076, CVE-2016-1077, CVE-2016-1078, CVE-2016-1080, CVE-2016-1081, CVE-2016-1082, CVE-2016-1083, CVE-2016-1084, CVE-2016-1085, CVE-2016-1086, CVE-2016-1088, CVE-2016-1093, CVE-2016-1095, CVE-2016-1116, CVE-2016-1118, CVE-2016-1119, CVE-2016-1120, CVE-2016-1123, CVE-2016-1124, CVE-2016-1125, CVE-2016-1126, CVE-2016-1127, CVE-2016-1128, CVE-2016-1129, CVE-2016-1130, CVE-2016-4088, CVE-2016-4089, CVE-2016-4093, CVE-2016-4094, CVE-2016-4096, CVE-2016-4097, CVE-2016-4098, CVE-2016-4099, CVE-2016-4100, CVE-2016-4101, CVE-2016-4103, CVE-2016-4104, and CVE-2016-4105.

Icihttp.exe in CA Gateway Security for HTTP, as used in CA Gateway Security 8.1 before 8.1.0.69 and CA Total Defense r12, does not properly parse URLs, which allows remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption and daemon crash) via a malformed request.

Adobe Reader and Acrobat before 11.0.17, Acrobat and Acrobat Reader DC Classic before 15.006.30198, and Acrobat and Acrobat Reader DC Continuous before 15.017.20050 on Windows and OS X allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2016-4191, CVE-2016-4192, CVE-2016-4193, CVE-2016-4194, CVE-2016-4195, CVE-2016-4196, CVE-2016-4197, CVE-2016-4198, CVE-2016-4199, CVE-2016-4200, CVE-2016-4201, CVE-2016-4202, CVE-2016-4203, CVE-2016-4204, CVE-2016-4205, CVE-2016-4206, CVE-2016-4207, CVE-2016-4211, CVE-2016-4212, CVE-2016-4213, CVE-2016-4214, CVE-2016-4250, CVE-2016-4251, CVE-2016-4252, and CVE-2016-4254.

Heap-based buffer overflow in Almost Native Graphics Layer Engine (ANGLE), as used in the WebGL implementation in Mozilla Firefox 4.x through 5, Thunderbird before 6, SeaMonkey 2.x before 2.3, and possibly other products might allow remote attackers to execute arbitrary code via unspecified vectors.

Multiple stack-based buffer overflows in IGSSdataServer.exe 9.00.00.11063 and earlier in 7-Technologies Interactive Graphical SCADA System (IGSS) allow remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via crafted (1) ListAll, (2) Write File, (3) ReadFile, (4) Delete, (5) RenameFile, and (6) FileInfo commands in an 0xd opcode; (7) the Add, (8) ReadFile, (9) Write File, (10) Rename, (11) Delete, and (12) Add commands in an RMS report templates (0x7) opcode; and (13) 0x4 command in an STDREP request (0x8) opcode to TCP port 12401.

Stack-based buffer overflow in OmniInet.exe in the Backup Client Service in HP OpenView Storage Data Protector 6.00, 6.10, and 6.11 allows remote attackers to execute arbitrary code via a malformed EXEC_SCRIPT message.

Buffer overflow in k23productions TFTPUtil GUI (aka TFTPGUI) 1.4.5 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a long transport mode.

Buffer overflow in Adobe Flash Player before 10.3.183.11 and 11.x before 11.1.102.55 on Windows, Mac OS X, Linux, and Solaris and before 11.1.102.59 on Android, and Adobe AIR before 3.1.0.4880, allows attackers to execute arbitrary code via unspecified vectors.

Adobe Flash Player before 10.3.183.11 and 11.x before 11.1.102.55 on Windows, Mac OS X, Linux, and Solaris and before 11.1.102.59 on Android, and Adobe AIR before 3.1.0.4880, allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2011-2445, CVE-2011-2451, CVE-2011-2452, CVE-2011-2454, CVE-2011-2455, CVE-2011-2459, and CVE-2011-2460.

Stack-based buffer overflow in the CIFS.NLM driver in Netware SMB 1.0 for Novell Netware 6.5 SP8 and earlier allows remote attackers to execute arbitrary code via a Sessions Setup AndX packet with a long AccountName.

Adobe Digital Editions before 4.5.2 allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2016-4257, CVE-2016-4258, CVE-2016-4259, CVE-2016-4260, CVE-2016-4261, and CVE-2016-4262.

Heap-based buffer overflow in Tor before 0.2.1.28 and 0.2.2.x before 0.2.2.20-alpha allows remote attackers to cause a denial of service (daemon crash) or possibly execute arbitrary code via unspecified vectors.