A vulnerability in Cisco Aironet 1830 Series and Cisco Aironet 1850 Series Access Points running Cisco Mobility Express Software could allow an unauthenticated, remote attacker to take complete control of an affected device. The vulnerability is due to the existence of default credentials for an affected device that is running Cisco Mobility Express Software, regardless of whether the device is configured as a master, subordinate, or standalone access point. An attacker who has layer 3 connectivity to an affected device could use Secure Shell (SSH) to log in to the device with elevated privileges. A successful exploit could allow the attacker to take complete control of the device. This vulnerability affects Cisco Aironet 1830 Series and Cisco Aironet 1850 Series Access Points that are running an 8.2.x release of Cisco Mobility Express Software prior to Release 8.2.111.0, regardless of whether the device is configured as a master, subordinate, or standalone access point. Release 8.2 was the first release of Cisco Mobility Express Software for next generation Cisco Aironet Access Points. Cisco Bug IDs: CSCva50691.

A vulnerability in a proprietary device driver in the kernel of Cisco TelePresence Multipoint Control Unit (MCU) Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. The vulnerability is due to improper size validation when reassembling fragmented IPv4 or IPv6 packets. An attacker could exploit this vulnerability by sending crafted IPv4 or IPv6 fragments to a port receiving content in Passthrough content mode. An exploit could allow the attacker to overflow a buffer. If successful, the attacker could execute arbitrary code or cause a DoS condition on the affected system. Cisco TelePresence MCU platforms TelePresence MCU 5300 Series, TelePresence MCU MSE 8510 and TelePresence MCU 4500 are affected when running software version 4.3(1.68) or later configured for Passthrough content mode. Cisco has released software updates that address this vulnerability. Workarounds that address this vulnerability are not available, but mitigations are available. Cisco Bug IDs: CSCuu67675.

Cisco Wireless LAN Solution Engine (WLSE) 2.0 through 2.5 and Hosting Solution Engine (HSE) 1.7 through 1.7.3 have a hardcoded username and password, which allows remote attackers to add new users, modify existing users, and change configuration.

Unknown vulnerability in Cisco ONS 15327 before 4.1(3), ONS 15454 before 4.6(1), ONS 15454 SD before 4.1(3), and Cisco ONS15600 before 1.3(0) allows a superuser whose account is locked out, disabled, or suspended to gain unauthorized access via a Telnet connection to the VxWorks shell.

The Cisco LEAP challenge/response authentication mechanism uses passwords in a way that is susceptible to dictionary attacks, which makes it easier for remote attackers to gain privileges via brute force password guessing attacks.

CiscoWorks Common Management Foundation (CMF) 2.1 and earlier allows the guest user to gain administrative privileges via a certain POST request to com.cisco.nm.cmf.servlet.CsAuthServlet, possibly involving the "cmd" parameter with a modifyUser value and a modified "priviledges" parameter.

CiscoWorks Common Management Foundation (CMF) 2.1 and earlier allows the guest user to obtain restricted information and possibly gain administrative privileges by changing the "guest" user to the Admin user on the Modify or delete users pages.

A vulnerability in the Cisco Cluster Management Protocol (CMP) processing code in Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device or remotely execute code with elevated privileges. The Cluster Management Protocol utilizes Telnet internally as a signaling and command protocol between cluster members. The vulnerability is due to the combination of two factors: (1) the failure to restrict the use of CMP-specific Telnet options only to internal, local communications between cluster members and instead accept and process such options over any Telnet connection to an affected device; and (2) the incorrect processing of malformed CMP-specific Telnet options. An attacker could exploit this vulnerability by sending malformed CMP-specific Telnet options while establishing a Telnet session with an affected Cisco device configured to accept Telnet connections. An exploit could allow an attacker to execute arbitrary code and obtain full control of the device or cause a reload of the affected device. This affects Catalyst switches, Embedded Service 2020 switches, Enhanced Layer 2 EtherSwitch Service Module, Enhanced Layer 2/3 EtherSwitch Service Module, Gigabit Ethernet Switch Module (CGESM) for HP, IE Industrial Ethernet switches, ME 4924-10GE switch, RF Gateway 10, and SM-X Layer 2/3 EtherSwitch Service Module. Cisco Bug IDs: CSCvd48893.

IOS 12.2(52)SE and 12.2(52)SE1 on Cisco Industrial Ethernet (IE) 3000 series switches has (1) a community name of public for RO access and (2) a community name of private for RW access, which makes it easier for remote attackers to modify the configuration or obtain potentially sensitive information via SNMP requests, aka Bug ID CSCtf25589.

Unspecified vulnerability in the SIP implementation in Cisco IOS 12.3 and 12.4 allows remote attackers to execute arbitrary code via a malformed SIP message, aka Bug ID CSCsz89904, the "SIP Packet Parsing Arbitrary Code Execution Vulnerability."

Multiple unspecified vulnerabilities in the web server in Cisco Unified MeetingPlace 7 before 7.0(2.3) hotfix 5F, 6 before 6.0.639.3, and possibly 5 allow remote attackers to create (1) user or (2) administrator accounts via a crafted URL in a request to the internal interface, aka Bug IDs CSCtc59231 and CSCtd40661.

Unspecified vulnerability in the SIP implementation in Cisco IOS 12.3 and 12.4 allows remote attackers to execute arbitrary code via a malformed SIP message, aka Bug ID CSCsz48680, the "SIP Message Processing Arbitrary Code Execution Vulnerability."

Cisco Mediator Framework 1.5.1 before 1.5.1.build.14-eng, 2.2 before 2.2.1.dev.1, and 3.0 before 3.0.9.release.1 on the Cisco Network Building Mediator NBM-2400 and NBM-4800 and the Richards-Zeta Mediator 2500 does not properly restrict network access to an unspecified configuration file, which allows remote attackers to read passwords and unspecified other account details via a (1) XML RPC or (2) XML RPC over HTTPS session, aka Bug ID CSCtb83512.

Cisco Mediator Framework 1.5.1 before 1.5.1.build.14-eng, 2.2 before 2.2.1.dev.1, and 3.0 before 3.0.9.release.1 on the Cisco Network Building Mediator NBM-2400 and NBM-4800 and the Richards-Zeta Mediator 2500 has a default password for the administrative user account and unspecified other accounts, which makes it easier for remote attackers to obtain privileged access, aka Bug ID CSCtb83495.

A vulnerability in the key-based SSH authentication mechanism of Cisco Policy Suite could allow an unauthenticated, remote attacker to log in to an affected system as the root user. This vulnerability is due to the re-use of static SSH keys across installations. An attacker could exploit this vulnerability by extracting a key from a system under their control. A successful exploit could allow the attacker to log in to an affected system as the root user.

Cisco Prime Data Center Network Manager (DCNM) before 6.1(1) does not properly restrict access to certain JBoss MainDeployer functionality, which allows remote attackers to execute arbitrary commands via JBoss Application Server Remote Method Invocation (RMI) services, aka Bug ID CSCtz44924.

Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) complete an SSL handshake with an HTTPS client even if this client is unauthorized, which might allow remote attackers to bypass intended access restrictions via an HTTPS session, aka Bug ID CSCso10876.

Multiple SSH2 servers and clients do not properly handle strings with null characters in them when the string length is specified by a length field, which could allow remote attackers to cause a denial of service or possibly execute arbitrary code due to interactions with the use of null-terminated strings as implemented using languages such as C, as demonstrated by the SSHredder SSH protocol test suite.

Multiple SSH2 servers and clients do not properly handle lists with empty elements or strings, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code, as demonstrated by the SSHredder SSH protocol test suite.

Multiple SSH2 servers and clients do not properly handle large packets or large fields, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code via buffer overflow attacks, as demonstrated by the SSHredder SSH protocol test suite.

A vulnerability in the upgrade mechanism of Cisco collaboration products based on the Cisco Voice Operating System software platform could allow an unauthenticated, remote attacker to gain unauthorized, elevated access to an affected device. The vulnerability occurs when a refresh upgrade (RU) or Prime Collaboration Deployment (PCD) migration is performed on an affected device. When a refresh upgrade or PCD migration is completed successfully, an engineering flag remains enabled and could allow root access to the device with a known password. If the vulnerable device is subsequently upgraded using the standard upgrade method to an Engineering Special Release, service update, or a new major release of the affected product, this vulnerability is remediated by that action. Note: Engineering Special Releases that are installed as COP files, as opposed to the standard upgrade method, do not remediate this vulnerability. An attacker who can access an affected device over SFTP while it is in a vulnerable state could gain root access to the device. This access could allow the attacker to compromise the affected system completely. Cisco Bug IDs: CSCvg22923, CSCvg55112, CSCvg55128, CSCvg55145, CSCvg58619, CSCvg64453, CSCvg64456, CSCvg64464, CSCvg64475, CSCvg68797.

A vulnerability in the vDaemon process in Cisco IOS XE SD-WAN Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. This vulnerability is due to insufficient bounds checking when an affected device processes traffic. An attacker could exploit this vulnerability by sending crafted traffic to the device. A successful exploit could allow the attacker to cause a buffer overflow and possibly execute arbitrary commands with root-level privileges, or cause the device to reload, which could result in a denial of service condition.

A vulnerability in the Universal Plug-and-Play (UPnP) service of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of incoming UPnP traffic. An attacker could exploit this vulnerability by sending a crafted UPnP request to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a DoS condition. Cisco has not released software updates that address this vulnerability.

Cisco Identity Services Engine (ISE) before 1.0.4.MR2 has default Oracle database credentials, which allows remote attackers to modify settings or perform unspecified other administrative actions via unknown vectors, aka Bug ID CSCts59135.

Cisco Network Registrar before 7.2 has a default administrative password, which makes it easier for remote attackers to obtain access via a TCP session, aka Bug ID CSCsm50627.

Unspecified vulnerability on the Cisco Wireless LAN Controller (WLC) platform 4.x before 4.2.205.0 and 5.x before 5.2.191.0, as used in Cisco 1500 Series, 2000 Series, 2100 Series, 4100 Series, 4200 Series, and 4400 Series Wireless Services Modules (WiSM), WLC Modules for Integrated Services Routers, and Catalyst 3750G Integrated Wireless LAN Controllers, allows remote attackers to modify the configuration via a crafted (1) HTTP or (2) HTTPS request, aka Bug ID CSCsy44672.

Directory traversal vulnerability in the TFTP service in Cisco CiscoWorks Common Services (CWCS) 3.0.x through 3.2.x on Windows, as used in Cisco Unified Service Monitor, Security Manager, TelePresence Readiness Assessment Manager, Unified Operations Manager, Unified Provisioning Manager, and other products, allows remote attackers to access arbitrary files via unspecified vectors.

The Java Servlet framework on Cisco TelePresence Recording Server devices with software 1.6.x before 1.6.2 and Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x does not require administrative authentication for unspecified actions, which allows remote attackers to execute arbitrary code via a crafted request, aka Bug IDs CSCtf42005 and CSCtf42008.

Cisco Application Networking Manager (ANM) before 2.0 uses default usernames and passwords, which makes it easier for remote attackers to access the application, or cause a denial of service via configuration changes, related to "default user credentials during installation."

Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.1) uses default (1) usernames and (2) passwords for (a) the administrator and (b) web management, which makes it easier for remote attackers to perform configuration changes or obtain operating-system access.

Cisco ACE 4710 Application Control Engine Appliance before A1(8a) uses default (1) usernames and (2) passwords for (a) the administrator, (b) web management, and (c) device management, which makes it easier for remote attackers to perform configuration changes to the Device Manager and other components, or obtain operating-system access.

A vulnerability in the Docker Engine configuration of Cisco CloudCenter Orchestrator (CCO; formerly CliQr) could allow an unauthenticated, remote attacker to install Docker containers with high privileges on the affected system. Affected Products: This vulnerability affect all releases of Cisco CloudCenter Orchestrator (CCO) deployments where the Docker Engine TCP port 2375 is open on the system and bound to local address 0.0.0.0 (any interface).

Cisco Application Networking Manager (ANM) before 2.0 uses a default MySQL root password, which makes it easier for remote attackers to execute arbitrary operating-system commands or change system files.

Buffer overflow in CiscoSecure ACS Server 2.4(2) and earlier allows remote attackers to cause a denial of service and possibly execute arbitrary commands via a large TACACS+ packet.

Buffer overflow in CSAdmin module in CiscoSecure ACS Server 2.4(2) and earlier allows remote attackers to cause a denial of service and possibly execute arbitrary commands via a large packet.

A vulnerability in the web-based graphical user interface (GUI) of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. Cisco Prime Home versions 5.1.1.6 and earlier and 5.2.2.2 and earlier have been confirmed to be vulnerable. Cisco Prime Home versions 6.0 and later are not vulnerable. More Information: CSCvb71732. Known Affected Releases: 5.0 5.0(1) 5.0(1.1) 5.0(1.2) 5.0(2) 5.15.1(0) 5.1(1) 5.1(1.3) 5.1(1.4) 5.1(1.5) 5.1(1.6) 5.1(2) 5.1(2.1) 5.1(2.3) 5.25.2(0.1) 5.2(1.0) 5.2(1.2) 5.2(2.0) 5.2(2.1) 5.2(2.2).

A vulnerability in the Cluster Manager of Cisco Policy Suite before 18.2.0 could allow an unauthenticated, remote attacker to log in to an affected system using the root account, which has default, static user credentials. The vulnerability is due to the presence of undocumented, static user credentials for the root account. An attacker could exploit this vulnerability by using the account to log in to an affected system. An exploit could allow the attacker to log in to the affected system and execute arbitrary commands as the root user. Cisco Bug IDs: CSCvh02680.

A vulnerability in Cisco Digital Network Architecture (DNA) Center could allow an unauthenticated, remote attacker to log in to an affected system by using an administrative account that has default, static user credentials. The vulnerability is due to the presence of undocumented, static user credentials for the default administrative account for the affected software. An attacker could exploit this vulnerability by using the account to log in to an affected system. A successful exploit could allow the attacker to log in to the affected system and execute arbitrary commands with root privileges. This vulnerability affects all releases of Cisco DNA Center Software prior to Release 1.1.3. Cisco Bug IDs: CSCvh98929.

The web configuration interface for Catalyst 3500 XL switches allows remote attackers to execute arbitrary commands without authentication when the enable password is not set, via a URL containing the /exec/ directory.

A vulnerability in the interdevice communications interface of the Cisco IP Interoperability and Collaboration System (IPICS) Universal Media Services (UMS) could allow an unauthenticated, remote attacker to modify configuration parameters of the UMS and cause the system to become unavailable. Affected Products: This vulnerability affects Cisco IPICS releases 4.8(1) to 4.10(1). More Information: CSCva46644. Known Affected Releases: 4.10(1) 4.8(1) 4.8(2) 4.9(1) 4.9(2).

Cisco IronPort AsyncOS 9.1.2-023, 9.1.2-028, 9.1.2-036, 9.7.2-046, 9.7.2-047, 9.7.2-054, 10.0.0-124, and 10.0.0-125 on Email Security Appliance (ESA) devices, when Enrollment Client before 1.0.2-065 is installed, allows remote attackers to obtain root access via a connection to the testing/debugging interface, aka Bug ID CSCvb26017.

The Cisco Linksys WVC54GC wireless video camera before firmware 1.25 sends cleartext configuration data in response to a Setup Wizard remote-management command, which allows remote attackers to obtain sensitive information such as passwords by sniffing the network.

The Cisco Linksys WRT350N with firmware 1.0.3.7 has "admin" as its default password for the "admin" account, which makes it easier for remote attackers to obtain access.

Unspecified vulnerability in the embedded HTTPS server on the Cisco IronPort Encryption Appliance 6.2.x before 6.2.9.1 and 6.5.x before 6.5.2, and the IronPort PostX MAP before 6.2.9.1, allows remote attackers to execute arbitrary code via unknown vectors, aka IronPort Bug 65923.

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

Cisco Network Admission Control (NAC) Appliance 3.5.x, 3.6.x before 3.6.4.4, 4.0.x before 4.0.6, and 4.1.x before 4.1.2 allows remote attackers to obtain the shared secret for the Clean Access Server (CAS) and Clean Access Manager (CAM) by sniffing error logs.