A vulnerability in the Transport Layer Security (TLS) library of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of the affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a malicious TLS message to an interface enabled for Secure Layer Socket (SSL) services on an affected device. Messages using SSL Version 3 (SSLv3) or SSL Version 2 (SSLv2) cannot be be used to exploit this vulnerability. An exploit could allow the attacker to cause a buffer underflow, triggering a crash on an affected device. This vulnerability affects Cisco ASA Software and Cisco FTD Software that is running on the following Cisco products: Adaptive Security Virtual Appliance (ASAv), Firepower Threat Defense Virtual (FTDv), Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCve18902, CSCve34335, CSCve38446.

A vulnerability in the ingress packet processing functionality of the Cisco Virtualized Packet Core-Distributed Instance (VPC-DI) Software could allow an unauthenticated, remote attacker to cause both control function (CF) instances on an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient handling of user-supplied data by the affected software. An attacker could exploit this vulnerability by sending malicious traffic to the internal distributed instance (DI) network address on an affected system. A successful exploit could allow the attacker to cause an unhandled error condition on the affected system, which would cause the CF instances to reload and consequently cause the entire VPC to reload, resulting in the disconnection of all subscribers and a DoS condition on the affected system. This vulnerability affects Cisco Virtualized Packet Core-Distributed Instance (VPC-DI) Software N4.0 through N5.5 with the Cisco StarOS operating system 19.2 through 21.3. Cisco Bug IDs: CSCve17656.

A vulnerability in the DHCP option 82 encapsulation functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software performs incomplete input validation of option 82 information that it receives in DHCP Version 4 (DHCPv4) packets from DHCP relay agents. An attacker could exploit this vulnerability by sending a crafted DHCPv4 packet to an affected device. A successful exploit could allow the attacker to cause a heap overflow condition on the affected device, which will cause the device to reload and result in a DoS condition. Cisco Bug IDs: CSCvg62730.

A vulnerability in the Local Packet Transport Services (LPTS) feature set of Cisco ASR 9000 Series Aggregation Services Router Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a lack of input and validation checking on certain Precision Time Protocol (PTP) ingress traffic to an affected device. An attacker could exploit this vulnerability by injecting malformed traffic into an affected device. A successful exploit could allow the attacker to cause services on the device to become unresponsive, resulting in a DoS condition. Cisco Bug IDs: CSCvj22858.

Unspecified vulnerability in the SSH server in (1) Cisco Service Control Engine (SCE) 3.0.x before 3.0.7 and 3.1.x before 3.1.0, and (2) Icon Labs Iconfidant SSH before 2.3.8, allows remote attackers to cause a denial of service (management interface outage) via SSH traffic that occurs during management operations and triggers "illegal I/O operations," aka Bug ID CSCsh49563.

A vulnerability in the IPv6 subsystem of Cisco IOS XR Software Release 5.3.4 for the Cisco Aggregation Services Router (ASR) 9000 Series could allow an unauthenticated, remote attacker to trigger a reload of one or more Trident-based line cards, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect handling of IPv6 packets with a fragment header extension. An attacker could exploit this vulnerability by sending IPv6 packets designed to trigger the issue either to or through the Trident-based line card. A successful exploit could allow the attacker to trigger a reload of Trident-based line cards, resulting in a DoS during the period of time the line card takes to restart. This vulnerability affects Cisco Aggregation Services Router (ASR) 9000 Series when the following conditions are met: The router is running Cisco IOS XR Software Release 5.3.4, and the router has installed Trident-based line cards that have IPv6 configured. A software maintenance upgrade (SMU) has been made available that addresses this vulnerability. The fix has also been incorporated into service pack 7 for Cisco IOS XR Software Release 5.3.4. Cisco Bug IDs: CSCvg46800.

A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly validating IP Version 4 (IPv4) and IP Version 6 (IPv6) packets after the software reassembles the packets (following IP Fragmentation). An attacker could exploit this vulnerability by sending a series of malicious, fragmented IPv4 or IPv6 packets to an affected device. A successful exploit could allow the attacker to cause Snort processes on the affected device to hang at 100% CPU utilization, which could cause the device to stop processing traffic and result in a DoS condition until the device is reloaded manually. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.2.1 and 6.2.2, if the software is running on a Cisco Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCvf91098.

A vulnerability in the Smart Install feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of packet data. An attacker could exploit this vulnerability by sending a crafted packet to an affected device on TCP port 4786. Only Smart Install client switches are affected. Cisco devices that are configured as a Smart Install director are not affected by this vulnerability. Cisco Bug IDs: CSCvd40673.

A vulnerability in the Switch Integrated Security Features of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an interface queue wedge. The vulnerability is due to incorrect handling of crafted IPv6 packets. An attacker could exploit this vulnerability by sending crafted IPv6 packets through the device. An exploit could allow the attacker to cause an interface queue wedge. This vulnerability affects the Cisco cBR-8 Converged Broadband Router, Cisco ASR 1000 Series Aggregation Services Routers, and Cisco Cloud Services Router 1000V Series when configured with IPv6. In the field and internal testing, this vulnerability was only observed or reproduced on the Cisco cBR-8 Converged Broadband Router. The Cisco ASR 1000 Series Aggregation Services Routers and Cisco Cloud Services Router 1000V Series contain the same code logic, so affected trains have had the code fix applied; however, on these two products, the vulnerability has not been observed in the field or successfully reproduced internally. Cisco Bug IDs: CSCvd75185.

A vulnerability in the web UI of Cisco FXOS and Cisco UCS Fabric Interconnect Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected system. The vulnerability is due to incorrect input validation in the web UI. An attacker could exploit this vulnerability by sending a malicious HTTP or HTTPS packet directed to the physical management interface of an affected system. A successful exploit could allow the attacker to cause the process to crash and possibly reload the device, resulting in a denial of service (DoS) condition on the affected system. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvb61398, CSCvb86799.

A vulnerability in the implementation of Session Initiation Protocol (SIP) processing in Cisco Small Business SPA514G IP Phones could allow an unauthenticated, remote attacker to cause an affected device to become unresponsive, resulting in a denial of service (DoS) condition. The vulnerability is due to improper processing of SIP request messages by an affected device. An attacker could exploit this vulnerability by sending crafted SIP messages to an affected device. A successful exploit could allow the attacker to cause the affected device to become unresponsive, resulting in a DoS condition that persists until the device is restarted manually. Cisco has not released software updates that address this vulnerability. This vulnerability affects Cisco Small Business SPA514G IP Phones that are running firmware release 7.6.2SR2 or earlier.

A vulnerability in the IPv6 processing code of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect handling of specific IPv6 hop-by-hop options. An attacker could exploit this vulnerability by sending a malicious IPv6 packet to or through the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition on an affected device.

A vulnerability in the Border Gateway Protocol (BGP) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to the device unexpectedly reloading. The vulnerability is due to incomplete input validation of the BGP update messages. An attacker could exploit this vulnerability by sending a crafted BGP update message to the targeted device. An exploit could allow the attacker to cause the switch to reload unexpectedly. The Cisco implementation of the BGP protocol only accepts incoming BGP traffic from explicitly defined peers. To exploit this vulnerability, an attacker must be able to send the malicious packets over a TCP connection that appears to come from a trusted BGP peer or inject malformed messages into the victim's BGP network. This would require obtaining information about the BGP peers in the affected system's trusted network. The vulnerability may be triggered when the router receives a malformed BGP message from a peer on an existing BGP session. At least one BGP neighbor session must be established for a router to be vulnerable. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve79599, CSCve87784, CSCve91371, CSCve91387.

A vulnerability in the Bidirectional Forwarding Detection (BFD) offload implementation of Cisco Catalyst 4500 Series Switches and Cisco Catalyst 4500-X Series Switches could allow an unauthenticated, remote attacker to cause a crash of the iosd process, causing a denial of service (DoS) condition. The vulnerability is due to insufficient error handling when the BFD header in a BFD packet is incomplete. An attacker could exploit this vulnerability by sending a crafted BFD message to or across an affected switch. A successful exploit could allow the attacker to trigger a reload of the system. This vulnerability affects Catalyst 4500 Supervisor Engine 6-E (K5), Catalyst 4500 Supervisor Engine 6L-E (K10), Catalyst 4500 Supervisor Engine 7-E (K10), Catalyst 4500 Supervisor Engine 7L-E (K10), Catalyst 4500E Supervisor Engine 8-E (K10), Catalyst 4500E Supervisor Engine 8L-E (K10), Catalyst 4500E Supervisor Engine 9-E (K10), Catalyst 4500-X Series Switches (K10), Catalyst 4900M Switch (K5), Catalyst 4948E Ethernet Switch (K5). Cisco Bug IDs: CSCvc40729.

A vulnerability in the DHCP option 82 encapsulation functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software performs incomplete input validation of option 82 information that it receives in DHCP Version 4 (DHCPv4) packets from DHCP relay agents. An attacker could exploit this vulnerability by sending a crafted DHCPv4 packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuh91645.

A vulnerability in the Session Initiation Protocol (SIP) call-handling functionality of Cisco IP Phone 6800, 7800, and 8800 Series Phones with Multiplatform Firmware could allow an unauthenticated, remote attacker to cause an affected phone to reload unexpectedly, resulting in a temporary denial of service (DoS) condition. The vulnerability exists because the firmware of an affected phone incorrectly handles errors that could occur when an incoming phone call is not answered. An attacker could exploit this vulnerability by sending a set of maliciously crafted SIP packets to an affected phone. A successful exploit could allow the attacker to cause the affected phone to reload unexpectedly, resulting in a temporary DoS condition. This vulnerability affects Cisco IP Phone 6800, 7800, and 8800 Series Phones with Multiplatform Firmware if they are running a Multiplatform Firmware release prior to Release 11.1(2). Cisco Bug IDs: CSCvi24718.

A vulnerability in the web framework of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a buffer overflow condition on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly parsing malformed HTTP packets that are destined to a device. An attacker could exploit this vulnerability by sending a malformed HTTP packet to an affected device for processing. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected device, resulting in a DoS condition.

A vulnerability in the SM-1T3/E3 firmware on Cisco Second Generation Integrated Services Routers (ISR G2) and the Cisco 4451-X Integrated Services Router (ISR4451-X) could allow an unauthenticated, remote attacker to cause the ISR G2 Router or the SM-1T3/E3 module on the ISR4451-X to reload, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of user input. An attacker could exploit this vulnerability by first connecting to the SM-1T3/E3 module console and entering a string sequence. A successful exploit could allow the attacker to cause the ISR G2 Router or the SM-1T3/E3 module on the ISR4451-X to reload, resulting in a DoS condition on an affected device.

Multiple vulnerabilities in the Application Layer Protocol Inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerabilities are due to logical errors during traffic inspection. An attacker could exploit these vulnerabilities by sending a high volume of malicious traffic across an affected device. An exploit could allow the attacker to cause a deadlock condition, resulting in a reload of an affected device. These vulnerabilities affect Cisco ASA Software and Cisco FTD Software configured for Application Layer Protocol Inspection running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCve61540, CSCvh23085, CSCvh95456.

A vulnerability in the Cisco Umbrella Integration feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition, related to the OpenDNS software. The vulnerability is due to a logic error that exists when handling a malformed incoming packet, leading to access to an internal data structure after it has been freed. An attacker could exploit this vulnerability by sending crafted, malformed IP packets to an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvb86327.

A vulnerability in the implementation of Point-to-Point Tunneling Protocol (PPTP) functionality in Cisco Aironet 1810, 1830, and 1850 Series Access Points could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Generic Routing Encapsulation (GRE) frames that pass through the data plane of an affected access point. An attacker could exploit this vulnerability by initiating a PPTP connection to an affected access point from a device that is registered to the same wireless network as the access point and sending a malicious GRE frame through the data plane of the access point. A successful exploit could allow the attacker to cause the NSS core process on the affected access point to crash, which would cause the access point to reload and result in a DoS condition. This vulnerability affects Cisco Aironet 1810, 1830, and 1850 Series Access Points that are running Cisco Mobility Express Software Release 8.4.100.0, 8.5.103.0, or 8.5.105.0 and are configured as a master, subordinate, or standalone access point. Cisco Bug IDs: CSCvf73890.

A vulnerability in the IPsec driver code of multiple Cisco IOS XE Software platforms and the Cisco ASA 5500-X Series Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to improper processing of malformed IPsec Authentication Header (AH) or Encapsulating Security Payload (ESP) packets. An attacker could exploit this vulnerability by sending malformed IPsec packets to be processed by an affected device. An exploit could allow the attacker to cause a reload of the affected device.

A vulnerability in the Precision Time Protocol (PTP) feature of Cisco Nexus 5500, 5600, and 6000 Series Switches running Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a lack of protection against PTP frame flood attacks. An attacker could exploit this vulnerability by sending large streams of malicious IPv4 or IPv6 PTP traffic to the affected device. A successful exploit could allow the attacker to cause a DoS condition, impacting the traffic passing through the device.

The DHCP relay agent in Cisco Adaptive Security Appliance (ASA) and PIX 7.2 allows remote attackers to cause a denial of service (dropped packets) via a DHCPREQUEST or DHCPINFORM message that causes multiple DHCPACK messages to be sent from DHCP servers to the agent, which consumes the memory allocated for a local buffer. NOTE: this issue only occurs when multiple DHCP servers are used.

A vulnerability in the HTTP remote procedure call (RPC) service of set-top box (STB) receivers manufactured by Cisco for Yes could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the firmware of an affected device fails to handle certain XML values that are passed to the HTTP RPC service listening on the local subnet of the device. An attacker could exploit this vulnerability by submitting a malformed request to an affected device. A successful attack could cause the affected device to restart, resulting in a DoS condition. Yes has updated the affected devices with firmware that addresses this vulnerability. Customers are not required to take action. Vulnerable Products: This vulnerability affects YesMaxTotal, YesMax HD, and YesQuattro STB devices. Cisco Bug IDs: CSCvd08812.

A vulnerability in the Session Initiation Protocol (SIP) of the Cisco TelePresence Codec (TC) and Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause a TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of flow-control mechanisms within the software. An attacker could exploit this vulnerability by sending a flood of SIP INVITE packets to the affected device. An exploit could allow the attacker to impact the availability of services and data of the device, including a complete DoS condition. This vulnerability affects the following Cisco TC and CE platforms when running software versions prior to TC 7.3.8 and CE 8.3.0. Cisco Bug IDs: CSCux94002.

Unspecified vulnerability in the IPSec Manager Service for Cisco Unified CallManager (CUCM) 5.0 before 5.0(4a)SU1 and Cisco Unified Presence Server (CUPS) 1.0 before 1.0(3) allows remote attackers to cause a denial of service (loss of cluster services) via a "specific UDP packet" to UDP port 8500, aka bug ID CSCsg60949.

A vulnerability in the logging configuration of Secure Sockets Layer (SSL) policies for Cisco FirePOWER System Software 5.3.0 through 6.2.2 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high consumption of system resources. The vulnerability is due to the logging of certain TCP packets by the affected software. An attacker could exploit this vulnerability by sending a flood of crafted TCP packets to an affected device. A successful exploit could allow the attacker to cause a DoS condition. The success of an exploit is dependent on how an administrator has configured logging for SSL policies for a device. This vulnerability affects Cisco FirePOWER System Software that is configured to log connections by using SSL policy default actions. Cisco Bug IDs: CSCvd07072.

A vulnerability in the Session Initiation Protocol (SIP) implementation of Cisco IP Phone 8851 11.0(0.1) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to an abnormal SIP message. An attacker could exploit this vulnerability by manipulating the CANCEL packet. An exploit could allow the attacker to cause a disruption of service to the phone. Cisco Bug IDs: CSCvc34795.

A vulnerability in the cache server within Cisco Videoscape Distribution Suite (VDS) for Television 3.2(5)ES1 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on a targeted appliance. The vulnerability is due to excessive mapped connections exhausting the allotted resources within the system. An attacker could exploit this vulnerability by sending large amounts of inbound traffic to a device with the intention of overloading certain resources. A successful exploit could cause the device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc39260.

Multiple Cisco products are affected by a vulnerability in local file management for certain system log files of Cisco collaboration products that could allow an unauthenticated, remote attacker to cause high disk utilization, resulting in a denial of service (DoS) condition. The vulnerability occurs because a certain system log file does not have a maximum size restriction. Therefore, the file is allowed to consume the majority of available disk space on the appliance. An attacker could exploit this vulnerability by sending crafted remote connection requests to the appliance. Successful exploitation could allow the attacker to increase the size of a system log file so that it consumes most of the disk space. The lack of available disk space could lead to a DoS condition in which the application functions could operate abnormally, making the appliance unstable. This vulnerability affects the following Cisco Voice Operating System (VOS)-based products: Emergency Responder, Finesse, Hosted Collaboration Mediation Fulfillment, MediaSense, Prime License Manager, SocialMiner, Unified Communications Manager (UCM), Unified Communications Manager IM and Presence Service (IM&P - earlier releases were known as Cisco Unified Presence), Unified Communication Manager Session Management Edition (SME), Unified Contact Center Express (UCCx), Unified Intelligence Center (UIC), Unity Connection, Virtualized Voice Browser. This vulnerability also affects Prime Collaboration Assurance and Prime Collaboration Provisioning. Cisco Bug IDs: CSCvd10872, CSCvf64322, CSCvf64332, CSCvi29538, CSCvi29543, CSCvi29544, CSCvi29546, CSCvi29556, CSCvi29571, CSCvi31738, CSCvi31741, CSCvi31762, CSCvi31807, CSCvi31818, CSCvi31823.

Unspecified vulnerability in Cisco Firewall Services Module (FWSM) 3.x before 3.1(3.3), when set to log at the "debug" level, allows remote attackers to cause a denial of service (device reboot) by sending packets that are not of a particular protocol such as TCP or UDP, which triggers the reboot during generation of Syslog message 710006.

Cisco Firewall Services Module (FWSM) 3.x before 3.1(3.1) allows remote attackers to cause a denial of service (device reboot) via malformed SNMP requests.

Memory leak in the TCP listener in Cisco IOS 9.x, 10.x, 11.x, and 12.x allows remote attackers to cause a denial of service by sending crafted TCP traffic to an IPv4 address on the IOS device.

Cisco PIX 500 and ASA 5500 Series Security Appliances 6.x before 6.3(5.115), 7.0 before 7.0(5.2), and 7.1 before 7.1(2.5), and the FWSM 3.x before 3.1(3.24), when the "inspect sip" option is enabled, allows remote attackers to cause a denial of service (device reboot) via malformed SIP packets.

Cisco PIX 500 and ASA 5500 Series Security Appliances 7.0 before 7.0(4.14) and 7.1 before 7.1(2.1), and the FWSM 2.x before 2.3(4.12) and 3.x before 3.1(3.24), when "inspect http" is enabled, allows remote attackers to cause a denial of service (device reboot) via malformed HTTP traffic.

Cisco PIX 500 and ASA 5500 Series Security Appliances 7.2.2, when configured to inspect certain TCP-based protocols, allows remote attackers to cause a denial of service (device reboot) via malformed TCP packets.

Multiple vulnerabilities in the ingress packet processing function of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute denial of service (DoS) attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Cisco FWSM 3.x before 3.1(3.2), when authentication is configured to use "aaa authentication match" or "aaa authentication include", allows remote attackers to cause a denial of service (device reboot) via a long HTTP request.

A vulnerability in the software-based SSL/TLS message handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message through an affected device. SSL/TLS messages sent to an affected device do not trigger this vulnerability. A successful exploit could allow the attacker to cause a process to crash. This crash would then trigger a reload of the device. No manual intervention is needed to recover the device after the reload.

Cisco Firewall Services Module (FWSM) 3.x before 3.1(3.11), when the HTTPS server is enabled, allows remote attackers to cause a denial of service (device reboot) via certain HTTPS traffic.

A vulnerability in the SIP inspection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a crash and reload of an affected device, resulting in a denial of service (DoS) condition.The vulnerability is due to a crash that occurs during a hash lookup for a SIP pinhole connection. An attacker could exploit this vulnerability by sending crafted SIP traffic through an affected device. A successful exploit could allow the attacker to cause a crash and reload of the affected device.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute denial of service (DoS) attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition of an affected device. The vulnerability is due to insufficient validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition.

A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCuu76493.

A vulnerability in the Session Initiation Protocol (SIP) UDP throttling process of Cisco Unified Communications Manager (Cisco Unified CM) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate limiting protection. An attacker could exploit this vulnerability by sending the affected device a high rate of SIP messages. An exploit could allow the attacker to cause the device to reload unexpectedly. The device and services will restart automatically. This vulnerability affects Cisco Unified Communications Manager (CallManager) releases prior to the first fixed release; the following list indicates the first minor release that includes the fix for this vulnerability: 10.5.2.14900-16 11.0.1.23900-5 11.5.1.12900-2. Cisco Bug IDs: CSCuz72455.

A vulnerability in the web user interface of Cisco IOS XE 3.1 through 3.17 could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient resource handling by the affected software when the web user interface is under a high load. An attacker could exploit this vulnerability by sending a high number of requests to the web user interface of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. To exploit this vulnerability, the attacker must have access to the management interface of the affected software, which is typically connected to a restricted management network. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the web user interface of the software is enabled. By default, the web user interface is not enabled. Cisco Bug IDs: CSCup70353.