A vulnerability in Cisco Aironet Access Points (APs) Software could allow an unauthenticated, remote attacker to gain unauthorized access to a targeted device with elevated privileges. The vulnerability is due to insufficient access control for certain URLs on an affected device. An attacker could exploit this vulnerability by requesting specific URLs from an affected AP. An exploit could allow the attacker to gain access to the device with elevated privileges. While the attacker would not be granted access to all possible configuration options, it could allow the attacker to view sensitive information and replace some options with values of their choosing, including wireless network configuration. It would also allow the attacker to disable the AP, creating a denial of service (DoS) condition for clients associated with the AP.
The SNMP implementation in the Cisco Wireless LAN Controller (WLC) before 20070419 uses the default read-only community public, and the default read-write community private, which allows remote attackers to read and modify SNMP variables, aka Bug ID CSCse02384.
The SSL implementation in Cisco Adaptive Security Appliance (ASA) Software 9.0 before 9.0(2.6) and 9.1 before 9.1(2) allows remote attackers to bypass authentication, and obtain VPN access or administrative access, via a crafted X.509 client certificate, aka Bug ID CSCuf52468.
The WIL-A module in Cisco TelePresence VX Clinical Assistant 1.2 before 1.21 changes the admin password to an empty password upon a reboot, which makes it easier for remote attackers to obtain access via the administrative interface, aka Bug ID CSCuj17238.
Directory traversal vulnerability in processImageSave.jsp in DCNM-SAN Server in Cisco Prime Data Center Network Manager (DCNM) before 6.2(1) allows remote attackers to write arbitrary files via the chartid parameter, aka Bug IDs CSCue77035 and CSCue77036. NOTE: this can be leveraged to execute arbitrary commands by using the JBoss autodeploy functionality.
Cisco IOS 9.x, 10.x, 11.x, and 12.x and IOS XR 2.0.x, 3.0.x, and 3.2.x allows remote attackers to cause a denial of service or execute arbitrary code via a crafted IP option in the IP header in a (1) ICMP, (2) PIMv2, (3) PGM, or (4) URD packet.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
Integer overflow in the Real-Time Information Server (RIS) Data Collector service (RisDC.exe) in Cisco Unified Communications Manager (CUCM, formerly CallManager) before 20070711 allow remote attackers to execute arbitrary code via crafted packets, resulting in a heap-based buffer overflow.
Cisco IOS 12.2 through 12.4 before 20060920, as used by Cisco IAD2430, IAD2431, and IAD2432 Integrated Access Devices, the VG224 Analog Phone Gateway, and the MWR 1900 and 1941 Mobile Wireless Edge Routers, is incorrectly identified as supporting DOCSIS, which allows remote attackers to gain read-write access via a hard-coded cable-docsis community string and read or modify arbitrary SNMP variables.
The web service framework in Cisco WAAS Software 4.x and 5.x before 5.0.3e, 5.1.x before 5.1.1c, and 5.2.x before 5.2.1 in a Central Manager (CM) configuration allows remote attackers to execute arbitrary code via a crafted POST request, aka Bug ID CSCuh26626.
Cisco TelePresence System Software 1.10.1 and earlier on 500, 13X0, 1X00, 30X0, and 3X00 devices, and 6.0.3 and earlier on TX 9X00 devices, has a default password for the pwrecovery account, which makes it easier for remote attackers to modify the configuration or perform arbitrary actions via HTTPS requests, aka Bug ID CSCui43128.
A vulnerability in the key-based SSH authentication mechanism of Cisco Policy Suite could allow an unauthenticated, remote attacker to log in to an affected system as the root user. This vulnerability is due to the re-use of static SSH keys across installations. An attacker could exploit this vulnerability by extracting a key from a system under their control. A successful exploit could allow the attacker to log in to an affected system as the root user.
Cisco Wireless LAN Solution Engine (WLSE) 2.0 through 2.5 and Hosting Solution Engine (HSE) 1.7 through 1.7.3 have a hardcoded username and password, which allows remote attackers to add new users, modify existing users, and change configuration.
Buffer overflow in the Intelligent Platform Management Interface (IPMI) functionality in the Manager component in Cisco Unified Computing System (UCS) 1.0 and 1.1 before 1.1(1j) and 1.2 before 1.2(1b) allows remote attackers to execute arbitrary code via malformed data in a UDP packet, aka Bug ID CSCtd32371.
Heap-based buffer overflow in Cisco TelePresence TC Software 4.x through 6.x before 6.0.1 and TE Software 4.x and 6.0.x before 6.0.2 allows remote attackers to execute arbitrary code via crafted SIP packets, aka Bug ID CSCud81796.
A vulnerability in the vDaemon process in Cisco IOS XE SD-WAN Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. This vulnerability is due to insufficient bounds checking when an affected device processes traffic. An attacker could exploit this vulnerability by sending crafted traffic to the device. A successful exploit could allow the attacker to cause a buffer overflow and possibly execute arbitrary commands with root-level privileges, or cause the device to reload, which could result in a denial of service condition.
The Tomcat Web Management feature in Cisco Unified Customer Voice Portal (CVP) Software before 9.0.1 ES 11 does not properly configure Tomcat components, which allows remote attackers to execute arbitrary code via a crafted (1) HTTP or (2) HTTPS request, aka Bug ID CSCub38384.
A vulnerability in the Universal Plug-and-Play (UPnP) service of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of incoming UPnP traffic. An attacker could exploit this vulnerability by sending a crafted UPnP request to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a DoS condition. Cisco has not released software updates that address this vulnerability.
Cisco Wireless LAN Controller (WLC) devices 7.4 before 7.4.110.0 distribute Aironet IOS software with a race condition in the status of the administrative HTTP server, which allows remote attackers to bypass intended access restrictions by connecting to an Aironet access point on which this server had been disabled ineffectively, aka Bug ID CSCuf66202.
Cisco TelePresence Manager 1.2.x through 1.6.x allows remote attackers to perform unspecified actions and consequently execute arbitrary code via a crafted request to the Java RMI interface, related to a "command injection vulnerability," aka Bug ID CSCtf97085.
The Cisco Unified SIP Phone 3905 with firmware before 9.4(1) allows remote attackers to obtain root access via a session on the test interface on TCP port 7870, aka Bug ID CSCuh75574.
The CGI subsystem on Cisco TelePresence Recording Server devices with software 1.6.x before 1.6.2 allows remote attackers to execute arbitrary commands via a request to TCP port 443, related to a "command injection vulnerability," aka Bug ID CSCtf97221.
Cisco Unified Wireless Network (UWN) Solution 7.x before 7.0.98.0 does not properly implement TLS and SSL, which has unspecified impact and remote attack vectors, aka Bug ID CSCtd01611.
Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or allow an authenticated, local attacker to gain escalated privileges on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco Application Services Engine could allow an unauthenticated, remote attacker to gain privileged access to host-level operations or to learn device-specific information, create diagnostic files, and make limited configuration changes. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.
A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the affected device. Cisco has not released software updates that address this vulnerability.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.
Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
Cisco Unified Wireless Network (UWN) Solution 7.x before 7.0.98.0 on 4404 series controllers does not properly implement the WEBAUTH_REQD state, which allows remote attackers to bypass intended access restrictions via WLAN traffic, aka Bug ID CSCtb75305.
Cisco Prime LAN Management Solution (LMS) 4.1 through 4.2.2 on Linux does not properly validate authentication and authorization requests in TCP sessions, which allows remote attackers to execute arbitrary commands via a crafted session, aka Bug ID CSCuc79779.
Multiple stack-based buffer overflows in agent.exe in Setup Manager in Cisco Intelligent Contact Manager (ICM) before 7.0 allow remote attackers to execute arbitrary code via a long parameter in a (1) HandleUpgradeAll, (2) AgentUpgrade, (3) HandleQueryNodeInfoReq, or (4) HandleUpgradeTrace TCP packet, aka Bug IDs CSCti45698, CSCti45715, CSCti45726, and CSCti46164.
Multiple SSH2 servers and clients do not properly handle packets or data elements with incorrect length specifiers, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code, as demonstrated by the SSHredder SSH protocol test suite.
A vulnerability in the web-based management interface of Cisco DNA Spaces Connector could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on the underling operating system with privileges of the web-based management application, which is running as a restricted user. This could result in changes being made to pages served by the web-based management application impacting the integrity or availability of the web-based management application.
Cisco Digital Media Manager (DMM) 5.0.x and 5.1.x has a default password for the Tomcat administration account, which makes it easier for remote attackers to execute arbitrary code via a crafted web application, aka Bug ID CSCta03378.
A vulnerability in the web-based management interface of Cisco RV110W Wireless-N VPN Firewall and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input data by the web-based management interface. An attacker could exploit this vulnerability by sending crafted requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user.
Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Secure Sockets Layer (SSL) VPN feature of Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device or cause the device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because HTTP requests are not properly validated. An attacker could exploit this vulnerability by sending a crafted HTTP request over an SSL connection to an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device or cause the device to reload, resulting in a DoS condition.
A vulnerability in the Telnet service of Cisco Small Business RV110W Wireless-N VPN Firewall Routers could allow an unauthenticated, remote attacker to take full control of the device with a high-privileged account. The vulnerability exists because a system account has a default and static password. An attacker could exploit this vulnerability by using this default account to connect to the affected system. A successful exploit could allow the attacker to gain full control of an affected device.
A vulnerability in the web management interface of Cisco Prime License Manager (PLM) Software could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of user input on the web management interface. An attacker could exploit this vulnerability by submitting a malicious request to an affected system. An exploit could allow the attacker to gain administrative-level privileges on the system. The attacker needs a valid username to exploit this vulnerability.
A vulnerability in Cisco SD-WAN Solution Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain access to information that they are not authorized to access, make changes to the system that they are not authorized to make, and execute commands on an affected system with privileges of the root user.
Multiple vulnerabilities in Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an unauthenticated, remote attacker or an authenticated, local attacker to execute arbitrary code on an affected system or cause an affected system to crash and reload. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Java Remote Management Interface of Cisco Unified Contact Center Express (Unified CCX) could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to insecure deserialization of user-supplied content by the affected software. An attacker could exploit this vulnerability by sending a malicious serialized Java object to a specific listener on an affected system. A successful exploit could allow the attacker to execute arbitrary code as the root user on an affected device.
A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the affected device.