A vulnerability in the authorization controls for the Cisco IOx application hosting infrastructure in Cisco IOS XE Software could allow an unauthenticated, remote attacker to execute Cisco IOx API commands without proper authorization. The vulnerability is due to incorrect handling of requests for authorization tokens. An attacker could exploit this vulnerability by using a crafted API call to request such a token. An exploit could allow the attacker to obtain an authorization token and execute any of the IOx API commands on an affected device.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in a proprietary device driver in the kernel of Cisco TelePresence Multipoint Control Unit (MCU) Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. The vulnerability is due to improper size validation when reassembling fragmented IPv4 or IPv6 packets. An attacker could exploit this vulnerability by sending crafted IPv4 or IPv6 fragments to a port receiving content in Passthrough content mode. An exploit could allow the attacker to overflow a buffer. If successful, the attacker could execute arbitrary code or cause a DoS condition on the affected system. Cisco TelePresence MCU platforms TelePresence MCU 5300 Series, TelePresence MCU MSE 8510 and TelePresence MCU 4500 are affected when running software version 4.3(1.68) or later configured for Passthrough content mode. Cisco has released software updates that address this vulnerability. Workarounds that address this vulnerability are not available, but mitigations are available. Cisco Bug IDs: CSCuu67675.

A vulnerability in the Data-in-Motion (DMo) process installed with the Cisco IOx application environment could allow an unauthenticated, remote attacker to cause a stack overflow that could allow remote code execution with root privileges in the virtual instance running on an affected device. The vulnerability is due to insufficient bounds checking in the DMo process. An attacker could exploit this vulnerability by sending crafted packets that are forwarded to the DMo process for evaluation. The impacts of a successful exploit are limited to the scope of the virtual instance and do not impact the router that is hosting Cisco IOx. This vulnerability affects the following Cisco 800 Series Industrial Integrated Services Routers: Cisco IR809 and Cisco IR829. Cisco IOx Releases 1.0.0.0 and 1.1.0.0 are vulnerable. Cisco Bug IDs: CSCuy52330.

A vulnerability in the web management interface of Cisco Prime License Manager (PLM) Software could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of user input on the web management interface. An attacker could exploit this vulnerability by submitting a malicious request to an affected system. An exploit could allow the attacker to gain administrative-level privileges on the system. The attacker needs a valid username to exploit this vulnerability.

Multiple vulnerabilities in the Java deserialization function that is used by Cisco Security Manager could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected device. These vulnerabilities are due to insecure deserialization of user-supplied content by the affected software. An attacker could exploit these vulnerabilities by sending a malicious serialized Java object to a specific listener on an affected system. A successful exploit could allow the attacker to execute arbitrary commands on the device with the privileges of NT AUTHORITY\SYSTEM on the Windows target host. Cisco has not released software updates that address these vulnerabilities.

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient user input validation of incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device using root-level privileges. Cisco has not released software updates that address this vulnerability.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

The Cisco Linksys WVC54GC wireless video camera before firmware 1.25 sends cleartext configuration data in response to a Setup Wizard remote-management command, which allows remote attackers to obtain sensitive information such as passwords by sniffing the network.

The Cisco Linksys WRT350N with firmware 1.0.3.7 has "admin" as its default password for the "admin" account, which makes it easier for remote attackers to obtain access.

The SSL implementation in Cisco Adaptive Security Appliance (ASA) Software 9.0 before 9.0(2.6) and 9.1 before 9.1(2) allows remote attackers to bypass authentication, and obtain VPN access or administrative access, via a crafted X.509 client certificate, aka Bug ID CSCuf52468.

Directory traversal vulnerability in processImageSave.jsp in DCNM-SAN Server in Cisco Prime Data Center Network Manager (DCNM) before 6.2(1) allows remote attackers to write arbitrary files via the chartid parameter, aka Bug IDs CSCue77035 and CSCue77036. NOTE: this can be leveraged to execute arbitrary commands by using the JBoss autodeploy functionality.

The WIL-A module in Cisco TelePresence VX Clinical Assistant 1.2 before 1.21 changes the admin password to an empty password upon a reboot, which makes it easier for remote attackers to obtain access via the administrative interface, aka Bug ID CSCuj17238.

Cisco TelePresence System Software 1.10.1 and earlier on 500, 13X0, 1X00, 30X0, and 3X00 devices, and 6.0.3 and earlier on TX 9X00 devices, has a default password for the pwrecovery account, which makes it easier for remote attackers to modify the configuration or perform arbitrary actions via HTTPS requests, aka Bug ID CSCui43128.

A vulnerability in the Cluster Manager of Cisco Policy Suite before 18.2.0 could allow an unauthenticated, remote attacker to log in to an affected system using the root account, which has default, static user credentials. The vulnerability is due to the presence of undocumented, static user credentials for the root account. An attacker could exploit this vulnerability by using the account to log in to an affected system. An exploit could allow the attacker to log in to the affected system and execute arbitrary commands as the root user. Cisco Bug IDs: CSCvh02680.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to craft a packet to the management interface on an affected system, causing a buffer overflow. The vulnerability is due to incorrect input validation in the authentication module of the NX-API subsystem. An attacker could exploit this vulnerability by sending a crafted HTTP or HTTPS packet to the management interface of an affected system with the NX-API feature enabled. An exploit could allow the attacker to execute arbitrary code as root. Note: NX-API is disabled by default. This vulnerability affects: MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd45804, CSCve02322, CSCve02412.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to execute arbitrary commands as root by leveraging local network access and connecting to the syseventd server, as demonstrated by copying configuration data into a readable filesystem.

The Tomcat Web Management feature in Cisco Unified Customer Voice Portal (CVP) Software before 9.0.1 ES 11 does not properly configure Tomcat components, which allows remote attackers to execute arbitrary code via a crafted (1) HTTP or (2) HTTPS request, aka Bug ID CSCub38384.

Buffer overflow in the Intelligent Platform Management Interface (IPMI) functionality in the Manager component in Cisco Unified Computing System (UCS) 1.0 and 1.1 before 1.1(1j) and 1.2 before 1.2(1b) allows remote attackers to execute arbitrary code via malformed data in a UDP packet, aka Bug ID CSCtd32371.

Cisco CiscoWorks Internetwork Performance Monitor (IPM) 2.6 creates a process that executes a command shell and listens on a randomly chosen TCP port, which allows remote attackers to execute arbitrary commands.

A vulnerability in Cisco SD-WAN Solution Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain access to information that they are not authorized to access, make changes to the system that they are not authorized to make, and execute commands on an affected system with privileges of the root user.

Cisco Prime LAN Management Solution (LMS) 4.1 through 4.2.2 on Linux does not properly validate authentication and authorization requests in TCP sessions, which allows remote attackers to execute arbitrary commands via a crafted session, aka Bug ID CSCuc79779.

A vulnerability in the key-based SSH authentication mechanism of Cisco Policy Suite could allow an unauthenticated, remote attacker to log in to an affected system as the root user. This vulnerability is due to the re-use of static SSH keys across installations. An attacker could exploit this vulnerability by extracting a key from a system under their control. A successful exploit could allow the attacker to log in to an affected system as the root user.

Cisco Prime Data Center Network Manager (DCNM) before 6.1(1) does not properly restrict access to certain JBoss MainDeployer functionality, which allows remote attackers to execute arbitrary commands via JBoss Application Server Remote Method Invocation (RMI) services, aka Bug ID CSCtz44924.

Cisco Network Admission Control (NAC) Appliance 3.5.x, 3.6.x before 3.6.4.4, 4.0.x before 4.0.6, and 4.1.x before 4.1.2 allows remote attackers to obtain the shared secret for the Clean Access Server (CAS) and Clean Access Manager (CAM) by sniffing error logs.

The DHCP relay subsystem of Cisco IOS 12.2 through 15.6 and Cisco IOS XE Software contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the DHCP relay subsystem of the affected software. An attacker could exploit this vulnerability by sending a crafted DHCP Version 4 (DHCPv4) packet to an affected system. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. Cisco Bug IDs: CSCsm45390, CSCuw77959.

A vulnerability in Cisco Aironet 1830 Series and Cisco Aironet 1850 Series Access Points running Cisco Mobility Express Software could allow an unauthenticated, remote attacker to take complete control of an affected device. The vulnerability is due to the existence of default credentials for an affected device that is running Cisco Mobility Express Software, regardless of whether the device is configured as a master, subordinate, or standalone access point. An attacker who has layer 3 connectivity to an affected device could use Secure Shell (SSH) to log in to the device with elevated privileges. A successful exploit could allow the attacker to take complete control of the device. This vulnerability affects Cisco Aironet 1830 Series and Cisco Aironet 1850 Series Access Points that are running an 8.2.x release of Cisco Mobility Express Software prior to Release 8.2.111.0, regardless of whether the device is configured as a master, subordinate, or standalone access point. Release 8.2 was the first release of Cisco Mobility Express Software for next generation Cisco Aironet Access Points. Cisco Bug IDs: CSCva50691.

Cisco TelePresence Software before TE 4.1.1 on the Cisco IP Video Phone E20 has a default password for the root account after an upgrade to TE 4.1.0, which makes it easier for remote attackers to modify the configuration via an SSH session, aka Bug ID CSCtw69889, a different vulnerability than CVE-2011-2555.

Unspecified vulnerability in the Smart Install functionality in Cisco IOS 12.2 and 15.1 allows remote attackers to execute arbitrary code or cause a denial of service (device crash) via crafted TCP packets to port 4786, aka Bug ID CSCto10165.

Heap-based buffer overflow in the Certificate Trust List (CTL) Provider service (CTLProvider.exe) in Cisco Unified Communications Manager (CUCM) 4.2 before 4.2(3)SR3 and 4.3 before 4.3(1)SR1, and CallManager 4.0 and 4.1 before 4.1(3)SR5c, allows remote attackers to cause a denial of service or execute arbitrary code via a long request.

Cisco Identity Services Engine (ISE) before 1.0.4.MR2 has default Oracle database credentials, which allows remote attackers to modify settings or perform unspecified other administrative actions via unknown vectors, aka Bug ID CSCts59135.

Cisco Network Registrar before 7.2 has a default administrative password, which makes it easier for remote attackers to obtain access via a TCP session, aka Bug ID CSCsm50627.

Multiple unspecified vulnerabilities in Cisco Unified Service Monitor before 8.6, as used in Unified Operations Manager before 8.6 and CiscoWorks LAN Management Solution 3.x and 4.x before 4.1; and multiple EMC Ionix products including Application Connectivity Monitor (Ionix ACM) 2.3 and earlier, Adapter for Alcatel-Lucent 5620 SAM EMS (Ionix ASAM) 3.2.0.2 and earlier, IP Management Suite (Ionix IP) 8.1.1.1 and earlier, and other Ionix products; allow remote attackers to execute arbitrary code via crafted packets to TCP port 9002, aka Bug IDs CSCtn42961 and CSCtn64922, related to a buffer overflow.

Cisco TelePresence Recording Server 1.7.2.x before 1.7.2.1 has a default password for the root administrator account, which makes it easier for remote attackers to modify the configuration via an SSH session, aka Bug ID CSCtr76182.

Multiple buffer overflows in securecgi-bin/CSuserCGI.exe in User-Changeable Password (UCP) before 4.2 in Cisco Secure Access Control Server (ACS) for Windows and ACS Solution Engine allow remote attackers to execute arbitrary code via a long argument located immediately after the Logout argument, and possibly unspecified other vectors.

Cisco Application Velocity System (AVS) before 5.1.0 is installed with default passwords for some system accounts, which allows remote attackers to gain privileges.

Buffer overflow in Cisco Unified IP Phone 7940, 7940G, 7960, and 7960G running SCCP and SIP firmware might allow remote attackers to execute arbitrary code via a crafted DNS response.

Buffer overflow in the telnet server in Cisco Unified IP Phone 7906G, 7911G, 7941G, 7961G, 7970G, and 7971G running SCCP firmware might allow remote authenticated users to execute arbitrary code via a crafted command.

Buffer overflow in Cisco Unified IP Phone 7940, 7940G, 7960, and 7960G running SIP firmware might allow remote attackers to execute arbitrary code via a SIP message with crafted MIME data.

Buffer overflow in the Centralized TFTP File Locator Service in Cisco Unified Communications Manager (CUCM, formerly CallManager) 5.1 before 5.1(3), and Unified CallManager 5.0, allows remote attackers to execute arbitrary code or cause a denial of service via unspecified vectors involving the processing of filenames, aka CSCsh47712.

Buffer overflow in a certain driver in Cisco Security Agent 4.5.1 before 4.5.1.672, 5.0 before 5.0.0.225, 5.1 before 5.1.0.106, and 5.2 before 5.2.0.238 on Windows allows remote attackers to execute arbitrary code via a crafted SMB packet in a TCP session on port (1) 139 or (2) 445.

The conversion utility for converting CiscoWorks Wireless LAN Solution Engine (WLSE) 4.1.91.0 and earlier to Cisco Wireless Control System (WCS) creates administrator accounts with default usernames and passwords, which allows remote attackers to gain privileges.

Buffer overflow in ldcconn in Hewlett-Packard (HP) Controller for Cisco Local Director on HP-UX 11.11i allows remote attackers to execute arbitrary code via a long string to TCP port 17781.

Unspecified vulnerability in Cisco Adaptive Security Appliance (ASA) and PIX 7.2 before 7.2(2)8, when using Layer 2 Tunneling Protocol (L2TP) or Remote Management Access, allows remote attackers to bypass LDAP authentication and gain privileges via unknown vectors.

Cisco Network Services (CNS) NetFlow Collection Engine (NFC) before 6.0 has an nfcuser account with the default password nfcuser, which allows remote attackers to modify the product configuration and, when installed on Linux, obtain login access to the host operating system.

The SNMP implementation in the Cisco Wireless LAN Controller (WLC) before 20070419 uses the default read-only community public, and the default read-write community private, which allows remote attackers to read and modify SNMP variables, aka Bug ID CSCse02384.

The Network Analysis Module (NAM) in Cisco Catalyst Series 6000, 6500, and 7600 allows remote attackers to execute arbitrary commands via certain SNMP packets that are spoofed from the NAM's own IP address.