Cisco IOS 9.x, 10.x, 11.x, and 12.x and IOS XR 2.0.x, 3.0.x, and 3.2.x allows remote attackers to cause a denial of service or execute arbitrary code via a crafted IP option in the IP header in a (1) ICMP, (2) PIMv2, (3) PGM, or (4) URD packet.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to obtain root access to the Network Processor (NP) Linux system by enabling a TELNET daemon (through CVE-2017-9479 exploitation) and then establishing a TELNET session.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to execute arbitrary commands as root by leveraging local network access and connecting to the syseventd server, as demonstrated by copying configuration data into a readable filesystem.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows Network Processor (NP) Linux users to obtain root access to the Application Processor (AP) Linux system via shell metacharacters in commands.

Directory traversal vulnerability in processImageSave.jsp in DCNM-SAN Server in Cisco Prime Data Center Network Manager (DCNM) before 6.2(1) allows remote attackers to write arbitrary files via the chartid parameter, aka Bug IDs CSCue77035 and CSCue77036. NOTE: this can be leveraged to execute arbitrary commands by using the JBoss autodeploy functionality.

Cisco Clean Access (CCA) 3.6.x through 3.6.4.2 and 4.0.x through 4.0.3.2 does not properly configure or allow modification of a shared secret authentication key, which causes all devices to have the same shared sercet and allows remote attackers to gain unauthorized access.

A vulnerability in the web interface for Cisco Prime Collaboration Provisioning could allow an unauthenticated, remote attacker to bypass authentication and perform command injection with root privileges. The vulnerability is due to missing security constraints in certain HTTP request methods, which could allow access to files via the web interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the targeted application. This vulnerability affects Cisco Prime Collaboration Provisioning Software Releases prior to 12.1. Cisco Bug IDs: CSCvc98724.

A vulnerability in Cisco Prime Data Center Network Manager (DCNM) Software could allow an unauthenticated, remote attacker to log in to the administrative console of a DCNM server by using an account that has a default, static password. The account could be granted root- or system-level privileges. The vulnerability exists because the affected software has a default user account that has a default, static password. The user account is created automatically when the software is installed. An attacker could exploit this vulnerability by connecting remotely to an affected system and logging in to the affected software by using the credentials for this default user account. A successful exploit could allow the attacker to use this default user account to log in to the affected software and gain access to the administrative console of a DCNM server. This vulnerability affects Cisco Prime Data Center Network Manager (DCNM) Software releases prior to Release 10.2(1) for Microsoft Windows, Linux, and Virtual Appliance platforms. Cisco Bug IDs: CSCvd95346.

The WIL-A module in Cisco TelePresence VX Clinical Assistant 1.2 before 1.21 changes the admin password to an empty password upon a reboot, which makes it easier for remote attackers to obtain access via the administrative interface, aka Bug ID CSCuj17238.

A vulnerability in the role-based access control (RBAC) functionality of Cisco Prime Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to access sensitive information or execute arbitrary code with root privileges on an affected system. The vulnerability is due to the lack of authentication and authorization mechanisms for a debugging tool that was inadvertently enabled in the affected software. An attacker could exploit this vulnerability by remotely connecting to the debugging tool via TCP. A successful exploit could allow the attacker to access sensitive information about the affected software or execute arbitrary code with root privileges on the affected system. This vulnerability affects Cisco Prime Data Center Network Manager (DCNM) Software Releases 10.1(1) and 10.1(2) for Microsoft Windows, Linux, and Virtual Appliance platforms. Cisco Bug IDs: CSCvd09961.

The Adaptive Security Device Management (ASDM) remote-management feature in Cisco Adaptive Security Appliance (ASA) Software 8.2.x before 8.2(5.46), 8.3.x before 8.3(2.39), 8.4.x before 8.4(6), 8.5.x before 8.5(1.18), 8.6.x before 8.6(1.12), 8.7.x before 8.7(1.7), 9.0.x before 9.0(3.1), and 9.1.x before 9.1(2.6) does not properly implement the authentication-certificate option, which allows remote attackers to bypass authentication via a TCP session to an ASDM interface, aka Bug ID CSCuh44815.

A vulnerability in the update process for the dynamic JAR file of the Cisco Context Service software development kit (SDK) could allow an unauthenticated, remote attacker to execute arbitrary code on the affected device with the privileges of the web server. More Information: CSCvb66730. Known Affected Releases: 2.0.

A vulnerability in the Cisco Cluster Management Protocol (CMP) processing code in Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device or remotely execute code with elevated privileges. The Cluster Management Protocol utilizes Telnet internally as a signaling and command protocol between cluster members. The vulnerability is due to the combination of two factors: (1) the failure to restrict the use of CMP-specific Telnet options only to internal, local communications between cluster members and instead accept and process such options over any Telnet connection to an affected device; and (2) the incorrect processing of malformed CMP-specific Telnet options. An attacker could exploit this vulnerability by sending malformed CMP-specific Telnet options while establishing a Telnet session with an affected Cisco device configured to accept Telnet connections. An exploit could allow an attacker to execute arbitrary code and obtain full control of the device or cause a reload of the affected device. This affects Catalyst switches, Embedded Service 2020 switches, Enhanced Layer 2 EtherSwitch Service Module, Enhanced Layer 2/3 EtherSwitch Service Module, Gigabit Ethernet Switch Module (CGESM) for HP, IE Industrial Ethernet switches, ME 4924-10GE switch, RF Gateway 10, and SM-X Layer 2/3 EtherSwitch Service Module. Cisco Bug IDs: CSCvd48893.

The SSL implementation in Cisco Adaptive Security Appliance (ASA) Software 9.0 before 9.0(2.6) and 9.1 before 9.1(2) allows remote attackers to bypass authentication, and obtain VPN access or administrative access, via a crafted X.509 client certificate, aka Bug ID CSCuf52468.

A vulnerability in the web-based GUI of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication and execute actions with administrator privileges. The vulnerability is due to a processing error in the role-based access control (RBAC) of URLs. An attacker could exploit this vulnerability by sending API commands via HTTP to a particular URL without prior authentication. An exploit could allow the attacker to perform any actions in Cisco Prime Home with administrator privileges. This vulnerability affects Cisco Prime Home versions from 6.3.0.0 to the first fixed release 6.5.0.1. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCvb49837.

A vulnerability in Cisco Aironet 1830 Series and Cisco Aironet 1850 Series Access Points running Cisco Mobility Express Software could allow an unauthenticated, remote attacker to take complete control of an affected device. The vulnerability is due to the existence of default credentials for an affected device that is running Cisco Mobility Express Software, regardless of whether the device is configured as a master, subordinate, or standalone access point. An attacker who has layer 3 connectivity to an affected device could use Secure Shell (SSH) to log in to the device with elevated privileges. A successful exploit could allow the attacker to take complete control of the device. This vulnerability affects Cisco Aironet 1830 Series and Cisco Aironet 1850 Series Access Points that are running an 8.2.x release of Cisco Mobility Express Software prior to Release 8.2.111.0, regardless of whether the device is configured as a master, subordinate, or standalone access point. Release 8.2 was the first release of Cisco Mobility Express Software for next generation Cisco Aironet Access Points. Cisco Bug IDs: CSCva50691.

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

A vulnerability in a proprietary device driver in the kernel of Cisco TelePresence Multipoint Control Unit (MCU) Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. The vulnerability is due to improper size validation when reassembling fragmented IPv4 or IPv6 packets. An attacker could exploit this vulnerability by sending crafted IPv4 or IPv6 fragments to a port receiving content in Passthrough content mode. An exploit could allow the attacker to overflow a buffer. If successful, the attacker could execute arbitrary code or cause a DoS condition on the affected system. Cisco TelePresence MCU platforms TelePresence MCU 5300 Series, TelePresence MCU MSE 8510 and TelePresence MCU 4500 are affected when running software version 4.3(1.68) or later configured for Passthrough content mode. Cisco has released software updates that address this vulnerability. Workarounds that address this vulnerability are not available, but mitigations are available. Cisco Bug IDs: CSCuu67675.

Cisco Linksys Routers EA2700, EA3500, E4200, EA4500: A bug can cause an unsafe TCP port to open which leads to unauthenticated access

Cisco 2700 Series Wireless Location Appliances before 2.1.34.0 have a default administrator username "root" and password "password," which allows remote attackers to obtain administrative privileges, aka Bug ID CSCsb92893.

Integer overflow in the Real-Time Information Server (RIS) Data Collector service (RisDC.exe) in Cisco Unified Communications Manager (CUCM, formerly CallManager) before 20070711 allow remote attackers to execute arbitrary code via crafted packets, resulting in a heap-based buffer overflow.

The web service framework in Cisco WAAS Software 4.x and 5.x before 5.0.3e, 5.1.x before 5.1.1c, and 5.2.x before 5.2.1 in a Central Manager (CM) configuration allows remote attackers to execute arbitrary code via a crafted POST request, aka Bug ID CSCuh26626.

Cisco IOS 12.2 through 12.4 before 20060920, as used by Cisco IAD2430, IAD2431, and IAD2432 Integrated Access Devices, the VG224 Analog Phone Gateway, and the MWR 1900 and 1941 Mobile Wireless Edge Routers, is incorrectly identified as supporting DOCSIS, which allows remote attackers to gain read-write access via a hard-coded cable-docsis community string and read or modify arbitrary SNMP variables.

Cisco TelePresence System Software 1.10.1 and earlier on 500, 13X0, 1X00, 30X0, and 3X00 devices, and 6.0.3 and earlier on TX 9X00 devices, has a default password for the pwrecovery account, which makes it easier for remote attackers to modify the configuration or perform arbitrary actions via HTTPS requests, aka Bug ID CSCui43128.

The Tomcat Web Management feature in Cisco Unified Customer Voice Portal (CVP) Software before 9.0.1 ES 11 does not properly configure Tomcat components, which allows remote attackers to execute arbitrary code via a crafted (1) HTTP or (2) HTTPS request, aka Bug ID CSCub38384.

A vulnerability in the key-based SSH authentication mechanism of Cisco Policy Suite could allow an unauthenticated, remote attacker to log in to an affected system as the root user. This vulnerability is due to the re-use of static SSH keys across installations. An attacker could exploit this vulnerability by extracting a key from a system under their control. A successful exploit could allow the attacker to log in to an affected system as the root user.

Cisco Prime LAN Management Solution (LMS) 4.1 through 4.2.2 on Linux does not properly validate authentication and authorization requests in TCP sessions, which allows remote attackers to execute arbitrary commands via a crafted session, aka Bug ID CSCuc79779.

Cisco Mediator Framework 1.5.1 before 1.5.1.build.14-eng, 2.2 before 2.2.1.dev.1, and 3.0 before 3.0.9.release.1 on the Cisco Network Building Mediator NBM-2400 and NBM-4800 and the Richards-Zeta Mediator 2500 does not properly restrict network access to an unspecified configuration file, which allows remote attackers to read passwords and unspecified other account details via a (1) XML RPC or (2) XML RPC over HTTPS session, aka Bug ID CSCtb83512.

A vulnerability in the vDaemon process in Cisco IOS XE SD-WAN Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. This vulnerability is due to insufficient bounds checking when an affected device processes traffic. An attacker could exploit this vulnerability by sending crafted traffic to the device. A successful exploit could allow the attacker to cause a buffer overflow and possibly execute arbitrary commands with root-level privileges, or cause the device to reload, which could result in a denial of service condition.

Cisco TelePresence Software before TE 4.1.1 on the Cisco IP Video Phone E20 has a default password for the root account after an upgrade to TE 4.1.0, which makes it easier for remote attackers to modify the configuration via an SSH session, aka Bug ID CSCtw69889, a different vulnerability than CVE-2011-2555.

The default installation of Cisco voice products, when running the IBM Director Agent on IBM servers before OS 2000.2.6, does not require authentication, which allows remote attackers to gain administrator privileges by connecting to TCP port 14247.

Multiple unspecified vulnerabilities in Cisco Unified Service Monitor before 8.6, as used in Unified Operations Manager before 8.6 and CiscoWorks LAN Management Solution 3.x and 4.x before 4.1; and multiple EMC Ionix products including Application Connectivity Monitor (Ionix ACM) 2.3 and earlier, Adapter for Alcatel-Lucent 5620 SAM EMS (Ionix ASAM) 3.2.0.2 and earlier, IP Management Suite (Ionix IP) 8.1.1.1 and earlier, and other Ionix products; allow remote attackers to execute arbitrary code via crafted packets to TCP port 9002, aka Bug IDs CSCtn42961 and CSCtn64922, related to a buffer overflow.

Cisco Network Registrar before 7.2 has a default administrative password, which makes it easier for remote attackers to obtain access via a TCP session, aka Bug ID CSCsm50627.

Unknown vulnerability in Cisco ONS 15327 before 4.1(3), ONS 15454 before 4.6(1), ONS 15454 SD before 4.1(3), and Cisco ONS15600 before 1.3(0) allows a superuser whose account is locked out, disabled, or suspended to gain unauthorized access via a Telnet connection to the VxWorks shell.

Cisco Media Processing Software before 1.2 on Media Experience Engine (MXE) 5600 devices has a default root password, which makes it easier for context-dependent attackers to obtain access via (1) the local console, (2) an SSH session, or (3) a TELNET session, aka Bug ID CSCto77737.

Cisco Wireless LAN Solution Engine (WLSE) 2.0 through 2.5 and Hosting Solution Engine (HSE) 1.7 through 1.7.3 have a hardcoded username and password, which allows remote attackers to add new users, modify existing users, and change configuration.

Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 6.x, 7.x before 7.1(5b)su4, 8.0, and 8.5 before 8.5(1)su2 and Cisco Unified Presence Server 6.x, 7.x, 8.0, and 8.5 before 8.5xnr allow remote attackers to read database data by connecting to a query interface through an SSL session, aka Bug IDs CSCti81574, CSCto63060, CSCto72183, and CSCto73833.

Cisco Secure Access Control Server for Windows (ACS Windows) and Cisco Secure Access Control Server Solution Engine (ACS Solution Engine) 3.3.1, when the EAP-TLS protocol is enabled, does not properly handle expired or untrusted certificates, which allows remote attackers to bypass authentication and gain unauthorized access via a "cryptographically correct" certificate with valid fields such as the username.

Cisco TelePresence Recording Server 1.7.2.x before 1.7.2.1 has a default password for the root administrator account, which makes it easier for remote attackers to modify the configuration via an SSH session, aka Bug ID CSCtr76182.

The PKI functionality in Cisco IOS 15.0 and 15.1 does not prevent permanent caching of certain public keys, which allows remote attackers to bypass authentication and have unspecified other impact by leveraging an IKE peer relationship in which a key was previously valid but later revoked, aka Bug ID CSCth82164, a different vulnerability than CVE-2010-4685.

CiscoWorks Common Management Foundation (CMF) 2.1 and earlier allows the guest user to gain administrative privileges via a certain POST request to com.cisco.nm.cmf.servlet.CsAuthServlet, possibly involving the "cmd" parameter with a modifyUser value and a modified "priviledges" parameter.

CiscoWorks Common Management Foundation (CMF) 2.1 and earlier allows the guest user to obtain restricted information and possibly gain administrative privileges by changing the "guest" user to the Admin user on the Modify or delete users pages.

The Management Console (webagent.exe) in Cisco Security Agent 5.1, 5.2, and 6.0 before 6.0.2.145 allows remote attackers to create arbitrary files and execute arbitrary code via unspecified parameters in a crafted st_upload request.

Cisco TelePresence Manager 1.2.x through 1.6.x allows remote attackers to perform unspecified actions and consequently execute arbitrary code via a crafted request to the Java RMI interface, related to a "command injection vulnerability," aka Bug ID CSCtf97085.

The Cisco LEAP challenge/response authentication mechanism uses passwords in a way that is susceptible to dictionary attacks, which makes it easier for remote attackers to gain privileges via brute force password guessing attacks.

The CGI subsystem on Cisco TelePresence Recording Server devices with software 1.6.x before 1.6.2 allows remote attackers to execute arbitrary commands via a request to TCP port 443, related to a "command injection vulnerability," aka Bug ID CSCtf97221.

The CGI implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x allows remote attackers to execute arbitrary commands via a malformed request, related to "command injection vulnerabilities," aka Bug ID CSCtb31640.