A vulnerability in Cisco AppDynamics Network Visibility Agent could allow an unauthenticated, local attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to the inability to handle unexpected input. An attacker who has local device access could exploit this vulnerability by sending an HTTP request to the targeted service. A successful exploit could allow the attacker to cause a DoS condition by stopping the Network Agent Service on the local device.

Cisco IOS XE 2.x and 3.x before 3.10.6S, 3.11.xS through 3.13.xS before 3.13.3S, and 3.14.xS through 3.15.xS before 3.15.1S allows remote attackers to cause a denial of service (device reload) via IPv4 packets that require NAT and MPLS actions, aka Bug ID CSCut96933.

A vulnerability in the Protocol Independent Multicast (PIM) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of received IPv4 PIMv2 packets. An attacker could exploit this vulnerability by sending a crafted PIMv2 packet to a PIM-enabled interface on an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition. Note: This vulnerability can be exploited with either an IPv4 multicast or unicast packet.

Cisco ASR 5000 and 5500 devices with software 18.0.0.57828 and 19.0.M0.61045 allow remote attackers to cause a denial of service (vpnmgr process restart) via a crafted header in a TACACS packet, aka Bug ID CSCuw01984.

A vulnerability in the Layer 2 Ethernet services of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause the line card network processor to reset, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of specific Ethernet frames that are received on line cards that have the Layer 2 services feature enabled. An attacker could exploit this vulnerability by sending specific Ethernet frames through an affected device. A successful exploit could allow the attacker to cause the ingress interface network processor to reset, resulting in a loss of traffic over the interfaces that are supported by the network processor. Multiple resets of the network processor would cause the line card to reset, resulting in a DoS condition.

A vulnerability in the PPP over Ethernet (PPPoE) termination feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, adjacent attacker to crash the ppp_ma process, resulting in a denial of service (DoS) condition. This vulnerability is due to the improper handling of malformed PPPoE packets that are received on a router that is running Broadband Network Gateway (BNG) functionality with PPPoE termination on a Lightspeed-based or Lightspeed-Plus-based line card. An attacker could exploit this vulnerability by sending a crafted PPPoE packet to an affected line card interface that does not terminate PPPoE. A successful exploit could allow the attacker to crash the ppp_ma process, resulting in a DoS condition for PPPoE traffic across the router.

A vulnerability in the web-based management interface of Cisco Finesse could allow an unauthenticated, remote attacker to conduct a stored XSS attack by exploiting an RFI vulnerability. This vulnerability is due to insufficient validation of user-supplied input for specific HTTP requests that are sent to an affected device. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive information on the affected device.

A vulnerability in the Remote Access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition on an affected device. This vulnerability is due to improper validation of client key data after the TLS session is established. An attacker could exploit this vulnerability by sending a crafted key value to an affected system over the secure TLS session. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the IP packet processing of Cisco Access Point (AP) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation of certain IPv4 packets. An attacker could exploit this vulnerability by sending a crafted IPv4 packet either to or through an affected device. A successful exploit could allow the attacker to cause an affected device to reload unexpectedly, resulting in a DoS condition. To successfully exploit this vulnerability, the attacker does not need to be associated with the affected AP. This vulnerability cannot be exploited by sending IPv6 packets.

The web interface in Cisco Firepower Extensible Operating System 1.1(1.160) on Firepower 9000 devices does not properly restrict use of IFRAME elements, which makes it easier for remote attackers to conduct clickjacking attacks and unspecified other attacks via a crafted web site, aka Bug ID CSCux10604.

Cisco AsyncOS before 8.5.7-043, 9.x before 9.1.1-023, and 9.5.x and 9.6.x before 9.6.0-046 on Email Security Appliance (ESA) devices mishandles malformed fields during body-contains, attachment-contains, every-attachment-contains, attachment-binary-contains, dictionary-match, and attachment-dictionary-match filtering, which allows remote attackers to cause a denial of service (memory consumption) via a crafted attachment in an e-mail message, aka Bug ID CSCuv47151.

The JavaServer Pages (JSP) component in Cisco Integrated Management Controller (IMC) Supervisor before 1.0.0.1 and UCS Director (formerly Cloupia Unified Infrastructure Controller) before 5.2.0.1 allows remote attackers to write to arbitrary files via crafted HTTP requests, aka Bug IDs CSCus36435 and CSCus62625.

The Mobile and Remote Access (MRA) services implementation in Cisco Unified Communications Manager mishandles edge-device identity validation, which allows remote attackers to bypass intended call-reception and call-setup restrictions by spoofing a user, aka Bug ID CSCuu97283.

The web interface in Cisco Secure Access Control System (ACS) 5.x before 5.4 Patch 3 allows remote attackers to execute arbitrary operating-system commands via a request to this interface, aka Bug ID CSCue65962.

A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device with the privileges of the web server.

A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerability is due to the affected software improperly sanitizing command arguments to prevent modifications to the underlying Linux filesystem on a device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit this vulnerability on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device.

A vulnerability in the Secure/Multipurpose Internet Mail Extensions (S/MIME) Decryption and Verification or S/MIME Public Key Harvesting features of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to cause an affected device to corrupt system memory. A successful exploit could cause the filtering process to unexpectedly reload, resulting in a denial of service (DoS) condition on the device. The vulnerability is due to improper input validation of S/MIME-signed emails. An attacker could exploit this vulnerability by sending a malicious S/MIME-signed email through a targeted device. If Decryption and Verification or Public Key Harvesting is configured, the filtering process could crash due to memory corruption and restart, resulting in a DoS condition. The software could then resume processing the same S/MIME-signed email, causing the filtering process to crash and restart again. A successful exploit could allow the attacker to cause a permanent DoS condition. This vulnerability may require manual intervention to recover the ESA.

The TFTP implementation on Cisco Small Business SPA30x, SPA50x, SPA51x phones 7.5.7 improperly validates firmware-image file integrity, which allows local users to load a Trojan horse image by leveraging shell access, aka Bug ID CSCut67400.

Cisco ASR 5000 devices with software 19.0.M0.60828 allow remote attackers to cause a denial of service (OSPF process restart) via crafted length fields in headers of OSPF packets, aka Bug ID CSCuv62820.

A vulnerability in the CLI parser of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device. Note: This vulnerability requires that any feature license is uploaded to the device. The vulnerability does not require that the license be used. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51693, CSCve91634, CSCve91659, CSCve91663.

The IPv6 snooping functionality in the first-hop security subsystem in Cisco IOS 12.2, 15.0, 15.1, 15.2, 15.3, 15.4, and 15.5 and IOS XE 3.2SE, 3.3SE, 3.3XO, 3.4SG, 3.5E, and 3.6E before 3.6.3E; 3.7E before 3.7.2E; 3.9S and 3.10S before 3.10.6S; 3.11S before 3.11.4S; 3.12S and 3.13S before 3.13.3S; and 3.14S before 3.14.2S allows remote attackers to cause a denial of service (device reload) via a malformed ND packet with the Cryptographically Generated Address (CGA) option, aka Bug ID CSCuo04400.

Cisco IOS 15.2(04)M and 15.4(03)M lets physical-interface ACLs supersede virtual PPP interface ACLs, which allows remote authenticated users to bypass intended network-traffic restrictions in opportunistic circumstances by using PPP, aka Bug ID CSCur61303.

Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the VLAN Trunking Protocol (VTP) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to corrupt the internal VTP database on an affected device and cause a denial of service (DoS) condition. The vulnerability is due to a logic error in how the affected software handles a subset of VTP packets. An attacker could exploit this vulnerability by sending VTP packets in a sequence that triggers a timeout in the VTP message processing code of the affected software. A successful exploit could allow the attacker to impact the ability to create, modify, or delete VLANs and cause a DoS condition. There are workarounds that address this vulnerability. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS Software or Cisco IOS XE Software, are operating in VTP client mode or VTP server mode, and do not have a VTP domain name configured. The default configuration for Cisco devices that are running Cisco IOS Software or Cisco IOS XE Software and support VTP is to operate in VTP server mode with no domain name configured.

Multiple vulnerabilities in the Application Level Gateway (ALG) for the Network Address Translation (NAT) feature of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the ALG and open unauthorized connections with a host located behind the ALG. For more information about these vulnerabilities, see the Details section of this advisory. Note: These vulnerabilities have been publicly discussed as NAT Slipstreaming.

Multiple vulnerabilities in the Application Level Gateway (ALG) for the Network Address Translation (NAT) feature of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the ALG and open unauthorized connections with a host located behind the ALG. For more information about these vulnerabilities, see the Details section of this advisory. Note: These vulnerabilities have been publicly discussed as NAT Slipstreaming.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an unauthenticated, remote attacker to cause the web-based management interface to unexpectedly restart. The vulnerability is due to insufficient input validation on the web-based management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to cause the interface to restart, resulting in a denial of service (DoS) condition.

A vulnerability in the software-based SSL/TLS message handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL/TLS decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Datagram TLS (DTLS) messages cannot be used to exploit this vulnerability.

A vulnerability in certain CLI commands of Cisco Identity Services Engine (ISE) could allow an authenticated, local attacker to execute arbitrary commands on the host operating system with the privileges of the local user, aka Command Injection. These commands should have been restricted from this user. The vulnerability is due to insufficient input validation of CLI command user input. An attacker could exploit this vulnerability by authenticating to the targeted device and issuing a CLI command with crafted user input. A successful exploit could allow the attacker to execute arbitrary commands on the affected system that should be restricted. The attacker would need to have valid user credentials for the device. Cisco Bug IDs: CSCvf49844.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to craft a packet to the management interface on an affected system, causing a buffer overflow. The vulnerability is due to incorrect input validation in the authentication module of the NX-API subsystem. An attacker could exploit this vulnerability by sending a crafted HTTP or HTTPS packet to the management interface of an affected system with the NX-API feature enabled. An exploit could allow the attacker to execute arbitrary code as root. Note: NX-API is disabled by default. This vulnerability affects: MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd45804, CSCve02322, CSCve02412.

A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software, Cisco IOS Software, Cisco IOS XE Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload. This vulnerability is due to improper input validation of the UDLD packets. An attacker could exploit this vulnerability by sending specifically crafted UDLD packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: The UDLD feature is disabled by default, and the conditions to exploit this vulnerability are strict. An attacker must have full control of a directly connected device. On Cisco IOS XR devices, the impact is limited to the reload of the UDLD process.

A vulnerability in the egress packet processing functionality of the Cisco StarOS operating system for Cisco Aggregation Services Router (ASR) 5700 Series devices and Virtualized Packet Core (VPC) System Software could allow an unauthenticated, remote attacker to cause an interface on the device to cease forwarding packets. The device may need to be manually reloaded to clear this Interface Forwarding Denial of Service condition. The vulnerability is due to the failure to properly check that the length of a packet to transmit does not exceed the maximum supported length of the network interface card (NIC). An attacker could exploit this vulnerability by sending a crafted IP packet or a series of crafted IP fragments through an interface on the targeted device. A successful exploit could allow the attacker to cause the network interface to cease forwarding packets. This vulnerability could be triggered by either IPv4 or IPv6 network traffic. This vulnerability affects the following Cisco products when they are running the StarOS operating system and a virtual interface card is installed on the device: Aggregation Services Router (ASR) 5700 Series, Virtualized Packet Core-Distributed Instance (VPC-DI) System Software, Virtualized Packet Core-Single Instance (VPC-SI) System Software. Cisco Bug IDs: CSCvf32385.

Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in Cisco WebEx Network Recording Player for Advanced Recording Format (ARF) files could allow a remote attacker to execute arbitrary code on the system of a targeted user. The attacker could exploit this vulnerability by sending the user a link or email attachment with a malicious ARF file and persuading the user to follow the link or launch the file. Successful exploitation could allow the attacker to execute arbitrary code on the user's system. This vulnerability affects Cisco WebEx Business Suite meeting sites, Cisco WebEx Meetings sites, Cisco WebEx Meetings Server, and Cisco WebEx ARF players. Cisco Bug IDs: CSCvg78853, CSCvg78856, CSCvg78857.

A vulnerability in the CLI of Cisco FTD Software could allow an authenticated, local attacker with administrative privileges to execute arbitrary commands with root privileges on the underlying operating system of an affected device.  This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected commands. A successful exploit could allow the attacker to execute commands with root privileges on the underlying operating system. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

Unspecified vulnerability in Stack Group Bidding Protocol (SGBP) support in Cisco IOS 12.0 through 12.4 running on various Cisco products, when SGBP is enabled, allows remote attackers on the local network to cause a denial of service (device hang and network traffic loss) via a crafted UDP packet to port 9900.

Cisco ASR 5500 System Architecture Evolution (SAE) Gateway devices with software 19.1.0.61559 and 19.2.0 allow remote attackers to cause a denial of service (BGP process restart) via a crafted header in a BGP packet, aka Bug ID CSCuw65781.

A vulnerability in the web interface of the Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform command injection and elevate privileges to root. The attacker must authenticate with valid administrator credentials. Affected Products: Cisco AsyncOS Software 10.0 and later for WSA on both virtual and hardware appliances. More Information: CSCvd88862. Known Affected Releases: 10.1.0-204. Known Fixed Releases: 10.5.1-270 10.1.1-235.

A vulnerability in the Client Manager Server of Cisco Workload Automation and Cisco Tidal Enterprise Scheduler could allow an unauthenticated, remote attacker to retrieve any file from the Client Manager Server. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted URL to the Client Manager Server. An exploit could allow the attacker to retrieve any file from the Cisco Workload Automation or Cisco Tidal Enterprise Scheduler Client Manager Server. This vulnerability affects the following products: Cisco Tidal Enterprise Scheduler Client Manager Server releases 6.2.1.435 and later, Cisco Workload Automation Client Manager Server releases 6.3.0.116 and later. Cisco Bug IDs: CSCvc90789.

The IPv6 snooping functionality in the first-hop security subsystem in Cisco IOS 12.2, 15.0, 15.1, 15.2, 15.3, 15.4, and 15.5 and IOS XE 3.2SE, 3.3SE, 3.3XO, 3.4SG, 3.5E, and 3.6E before 3.6.3E; 3.7E before 3.7.2E; 3.9S and 3.10S before 3.10.6S; 3.11S before 3.11.4S; 3.12S and 3.13S before 3.13.3S; and 3.14S before 3.14.2S does not properly implement the Control Plane Protection (aka CPPr) feature, which allows remote attackers to cause a denial of service (device reload) via a flood of ND packets, aka Bug ID CSCus19794.

A vulnerability in the web interface of the Cisco Registered Envelope Service could allow an unauthenticated, remote attacker to redirect a user to a undesired web page, aka an Open Redirect. This vulnerability affects the Cisco Registered Envelope cloud-based service. More Information: CSCvc60123. Known Affected Releases: 5.1.0-015.

Cisco Emergency Responder 10.5(3.10000.9) allows remote attackers to upload files to arbitrary locations via a crafted parameter, aka Bug ID CSCuv25501.

Cisco TelePresence Video Communication Server (VCS) Expressway X8.5.1 and X8.5.2 allows local users to write to arbitrary files via an unspecified symlink attack, aka Bug ID CSCuv11969.

Cisco Secure Access Control Server (ACS) Solution Engine 5.7(0.15) allows remote authenticated users to cause a denial of service (SSH screen process crash) via crafted (1) CLI or (2) GUI commands, aka Bug ID CSCuw24694.

The administrative web interface on Cisco DPC3939 (XB3) devices with firmware 121109aCMCST allows remote authenticated users to execute arbitrary commands via unspecified fields, aka Bug ID CSCuw86170.

Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.

A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with Administrator privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as a low-privileged user to execute the affected commands. A successful exploit could allow the attacker to execute commands with Administrator privileges.

A vulnerability in the MPLS Operation, Administration, and Maintenance (OAM) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper input validation when an affected device is processing an MPLS echo-request or echo-reply packet. An attacker could exploit this vulnerability by sending malicious MPLS echo-request or echo-reply packets to an interface that is enabled for MPLS forwarding on the affected device. A successful exploit could allow the attacker to cause the MPLS OAM process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition.