Cisco NX-OS 6.2(2) on Nexus 7000 switches allows local users to cause a denial of service via crafted sed input, aka Bug ID CSCui56136.
The fabric-interconnect component in Cisco Unified Computing System (UCS) allows local users to cause a denial of service (component crash) via crafted "debug hardware" parameters, aka Bug ID CSCtq86468.
Cisco Unified IP 9900 phones with firmware 9.4(.1) and earlier allow local users to cause a denial of service (device reload) via crafted commands, aka Bug ID CSCup92790.
The fabric-interconnect component in Cisco Unified Computing System (UCS) allows local users to cause a denial of service via crafted command parameters that trigger hardware-component write operations, aka Bug ID CSCtq86549.
The ACL implementation in Cisco IOS before 15.1(1)SY on Catalyst 6500 and 7600 devices allows local users to cause a denial of service (device reload) via a "no object-group" command followed by an object-group command, aka Bug ID CSCts16133.
The VPN driver in Cisco VPN Client on Windows does not properly interact with the kernel, which allows local users to cause a denial of service (kernel fault and system crash) via a crafted application, aka Bug ID CSCuc81669.
Cisco Unified IP 9900 phones with firmware 9.4(.1) and earlier use weak permissions for unspecified files, which allows local users to cause a denial of service (persistent hang or reboot) by writing to a phone's filesystem, aka Bug ID CSCup90474.
Cisco IOS XR allows local users to cause a denial of service (Silicon Packet Processor memory corruption, improper mutex handling, and device reload) by starting an outbound flood of large ICMP Echo Request packets and stopping this with a CTRL-C sequence, aka Bug ID CSCui60347.
Memory leak in the CLI component on Cisco Unified Computing System (UCS) 6100 Fabric Interconnect devices, in certain situations that lack a SPAN session, allows local users to cause a denial of service (memory consumption and device reset) via a (1) "show monitor session all" or (2) "show monitor session" command, aka Bug ID CSCug20103.
The crypto engine process in Cisco IOS on Aggregation Services Router (ASR) Route Processor 2 does not properly manage memory, which allows local users to cause a denial of service (route processor crash) by creating multiple tunnels and then examining encryption statistics, aka Bug ID CSCuc52193.
MCServer in the Cisco Management Controller in Cisco Unified Computing System (UCS) allows local users to cause a denial of service (application crash) via invalid MCTools parameters, aka Bug ID CSCtg20734.
The L2TP module in Cisco IOS XE 3.10S(.2) and earlier on ASR 1000 routers allows remote authenticated users to cause a denial of service (ESP card reload) via a malformed L2TP packet, aka Bug ID CSCun09973.
Cisco AsyncOS on Email Security Appliance (ESA) and Content Security Management Appliance (SMA) devices, when Active Directory is enabled, does not properly handle group names, which allows remote attackers to gain role privileges by leveraging group-name similarity, aka Bug ID CSCum86085.
A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to inject and execute arbitrary commands with administrative privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of user-supplied input to the web UI. An attacker could exploit this vulnerability by submitting crafted input to the web UI. A successful exploit could allow an attacker to execute arbitrary commands with administrative privileges on an affected device.
A vulnerability in the web server authentication of Cisco IOS XE Software could allow an authenticated, remote attacker to crash the web server on the device. The vulnerability is due to insufficient input validation during authentication. An attacker could exploit this vulnerability by entering unexpected characters during a valid authentication. A successful exploit could allow the attacker to crash the web server on the device, which must be manually recovered by disabling and re-enabling the web server.
A vulnerability in the Topology Discovery Service of Cisco One Platform Kit (onePK) in Cisco IOS Software, Cisco IOS XE Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient length restrictions when the onePK Topology Discovery Service parses Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol message to an affected device. An exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges, or to cause a process crash, which could result in a reload of the device and cause a DoS condition.
The Document Management component in Cisco Unified Contact Center Express does not properly validate a parameter, which allows remote authenticated users to upload files to arbitrary pathnames via a crafted HTTP request, aka Bug ID CSCun74133.
Cisco TelePresence System MXP Series Software before F9.3.1 allows remote attackers to cause a denial of service (device reload) via crafted SIP packets, aka Bug ID CSCty45733.
Cisco TelePresence TC Software 4.x and 5.x and TE Software 4.x and 6.0 allow remote attackers to cause a denial of service (memory consumption) via crafted H.225 packets, aka Bug ID CSCtq78849.
The web interface in Cisco Prime Infrastructure 2.1 and earlier does not properly restrict use of IFRAME elements, which makes it easier for remote attackers to conduct clickjacking attacks and unspecified other attacks via a crafted web site, related to a "cross-frame scripting (XFS)" issue, aka Bug ID CSCuj42444.
Cisco Adaptive Security Appliance (ASA) Software, when DHCPv6 replay is configured, allows remote attackers to cause a denial of service (device reload) via a crafted DHCPv6 packet, aka Bug ID CSCun45520.
Cisco Adaptive Security Appliance (ASA) Software 8.x before 8.2(5.48), 8.3 before 8.3(2.40), 8.4 before 8.4(7.9), 8.6 before 8.6(1.13), 9.0 before 9.0(4.1), and 9.1 before 9.1(4.3) does not properly process management-session information during privilege validation for SSL VPN portal connections, which allows remote authenticated users to gain privileges by establishing a Clientless SSL VPN session and entering crafted URLs, aka Bug ID CSCul70099.
Cisco IOS 12.2 and 15.0 through 15.3 and IOS XE 3.2 through 3.7 before 3.7.5S and 3.8 through 3.10 before 3.10.1S allow remote attackers to cause a denial of service (device reload) via a malformed IKEv2 packet, aka Bug ID CSCui88426.
A vulnerability in the out of band (OOB) management interface IP table rule programming for Cisco Application Policy Infrastructure Controller (APIC) could allow an unauthenticated, remote attacker to bypass configured deny entries for specific IP ports. These IP ports would be permitted to the OOB management interface when, in fact, the packets should be dropped. The vulnerability is due to the configuration of specific IP table entries for which there is a programming logic error that results in the IP port being permitted. An attacker could exploit this vulnerability by sending traffic to the OOB management interface on the targeted device. A successful exploit could allow the attacker to bypass configured IP table rules to drop specific IP port traffic. The attacker has no control over the configuration of the device itself. This vulnerability affects Cisco APIC releases prior to the first fixed software Release 4.2(3j).
The H.225 subsystem in Cisco TelePresence System MXP Series Software before F9.3.1 allows remote attackers to cause a denial of service (device reload) via crafted packets, aka Bug ID CSCty45731.
system/egain/chat/entrypoint in Cisco Unified Web and E-mail Interaction Manager 9.0(2) allows remote attackers to have an unspecified impact by injecting a spoofed XML external entity.
A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an NX-API system process to unexpectedly restart. The vulnerability is due to incorrect validation of the HTTP header of a request that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP request to the NX-API on an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition in the NX-API service; however, the Cisco NX-OS device itself would still be available and passing network traffic. Note: The NX-API feature is disabled by default.
A vulnerability in Cisco Firepower Device Manager (FDM) On-Box software could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation. An attacker could exploit this vulnerability by uploading a malicious file to an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on as well as modify the underlying operating system of an affected device.
The Zone-Based Firewall (ZBFW) functionality in Cisco IOS, possibly 15.4 and earlier, and IOS XE, possibly 3.13 and earlier, mishandles zone checking for existing sessions, which allows remote attackers to bypass intended resource-access restrictions via spoofed traffic that matches one of these sessions, aka Bug IDs CSCun94946 and CSCun96847.
A vulnerability in Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to execute code with root privileges on an affected system. The vulnerability is due to insufficient input sanitization during user authentication processing. An attacker could exploit this vulnerability by sending a crafted response to the Cisco SD-WAN vManage Software. A successful exploit could allow the attacker to access the software and execute commands they should not be authorized to execute.
Cisco Emergency Responder (ER) 8.6 and earlier allows remote attackers to inject web pages and modify dynamic content via unspecified parameters, aka Bug ID CSCun37882.
A vulnerability in the TCP processing engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper handling of TCP traffic. An attacker could exploit this vulnerability by sending a specific sequence of packets at a high rate through an affected device. A successful exploit could allow the attacker to temporarily disrupt traffic through the device while it reboots.
The SIP implementation in Cisco TelePresence TC Software 4.x and 5.x and TE Software 4.x and 6.0 allows remote attackers to cause a denial of service (device reload) via crafted SIP packets, aka Bug ID CSCua86589.
The SIP implementation in Cisco TelePresence TC Software 4.x and 5.x and TE Software 4.x and 6.0 allows remote attackers to cause a denial of service (device reload) via crafted SIP packets, aka Bug ID CSCud29566.
Cisco Intrusion Prevention System (IPS) Software allows remote attackers to cause a denial of service (MainApp process outage) via malformed SNMP packets, aka Bug IDs CSCum52355 and CSCul49309.
The Cisco RV router firmware on RV220W devices, before 1.0.5.9 on RV120W devices, and before 1.0.4.14 on RV180 and RV180W devices allows remote attackers to upload files to arbitrary locations via a crafted HTTP request, aka Bug ID CSCuh86998.
Cisco IOS XR does not properly throttle ICMPv6 redirect packets, which allows remote attackers to cause a denial of service (IPv4 and IPv6 transit outage) via crafted redirect messages, aka Bug ID CSCum14266.
Cisco Unified Web and E-Mail Interaction Manager places session identifiers in GET requests, which allows remote attackers to inject conversation text by obtaining a valid identifier, aka Bug ID CSCuj43084.
Cisco TelePresence TC Software 4.x through 6.x before 6.2.0 and TE Software 4.x and 6.0 allow remote authenticated users to execute arbitrary commands by using the commands as arguments to internal system scripts, aka Bug ID CSCue60211.
The SIP implementation in Cisco TelePresence TC Software 4.x and 5.x and TE Software 4.x and 6.0 allows remote attackers to cause a denial of service (device reload) via crafted SIP packets, aka Bug ID CSCuj94651.
Cisco TelePresence System MXP Series Software before F9.3.1 allows remote attackers to cause a denial of service (device reload) via crafted SIP packets, aka Bug ID CSCty45720.
A vulnerability in the web-based management interface of Cisco AsyncOS for Cisco Email Security Appliance (ESA), Cisco Web Security Appliance (WSA), and Cisco Content Security Management Appliance (SMA) could allow an unauthenticated remote attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of specific HTTP request headers. An attacker could exploit this vulnerability by sending a malformed HTTP request to an affected device. A successful exploit could allow the attacker to trigger a prolonged status of high CPU utilization relative to the GUI process(es). Upon successful exploitation of this vulnerability, an affected device will still be operative, but its response time and overall performance may be degraded.
The H.225 subsystem in Cisco TelePresence System MXP Series Software before F9.3.1 allows remote attackers to cause a denial of service (device reload) via crafted packets, aka Bug ID CSCtq78722.
Cisco IOS 12.2 and 15.0 through 15.3, when used with the Kailash FPGA before 2.6 on RSP720-3C-10GE and RSP720-3CXL-10GE devices, allows remote attackers to cause a denial of service (route switch processor outage) via crafted IP packets, aka Bug ID CSCug84789.
CRLF injection vulnerability in the web framework in Cisco Web Security Appliance (WSA) 7.7 and earlier allows remote attackers to inject arbitrary HTTP headers and conduct redirection attacks via a crafted URL, aka Bug ID CSCuj61002.
The SIP implementation in Cisco TelePresence TC Software 4.x and TE Software 4.x allows remote attackers to cause a denial of service (device reload) via crafted SIP packets, aka Bug ID CSCto70562.
Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.
The Java-based software in Cisco Hosted Collaboration Solution (HCS) allows remote attackers to cause a denial of service (closing of TCP ports) via unspecified vectors, aka Bug IDs CSCug77633, CSCug77667, CSCug78266, CSCug82795, and CSCuh58643.
A vulnerability in the phone book feature of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker to cause the CPU to increase to 100% utilization, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to improper handling of the XML input. An attacker could exploit this vulnerability by sending a Session Initiation Protocol (SIP) message with a crafted XML payload to an affected device. A successful exploit could allow the attacker to exhaust CPU resources, resulting in a DoS condition. Manual intervention may be required to recover the device. This vulnerability is fixed in Cisco Expressway Series and Cisco TelePresence Video Communication Server Releases X12.5.1 and later.
A vulnerability in the WLAN Local Profiling feature of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect parsing of HTTP packets while performing HTTP-based endpoint device classifications. An attacker could exploit this vulnerability by sending a crafted HTTP packet to an affected device. A successful exploit could cause an affected device to reboot, resulting in a DoS condition.