A vulnerability in Cisco Jabber for Windows could allow an authenticated, remote attacker to execute arbitrary code. The vulnerability is due to improper validation of message contents. An attacker could exploit this vulnerability by sending specially crafted Extensible Messaging and Presence Protocol (XMPP) messages to the affected software. A successful exploit could allow the attacker to cause the application to execute arbitrary programs on the targeted system with the privileges of the user account that is running the Cisco Jabber client software, possibly resulting in arbitrary code execution.

Multiple vulnerabilities in the web management framework of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to gain unauthorized read access to sensitive data or cause the web management software to hang or crash, resulting in a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in Security Group Tag Exchange Protocol (SXP) in Cisco IOS Software, Cisco IOS XE Software, and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because crafted SXP packets are mishandled. An attacker could exploit this vulnerability by sending specifically crafted SXP packets to the affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

A vulnerability in the IPv6 packet processing engine of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of incoming IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet through an affected device. A successful exploit could allow the attacker to cause an unexpected reboot of the switch, leading to a DoS condition. This vulnerability is specific to IPv6 traffic. IPv4 traffic is not affected.

A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of the Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause the device to unexpectedly reload, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to the lack of input validation of the information used to generate an SNMP trap in relation to a wireless client connection. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, causing a DoS condition.

A vulnerability in the Secure Sockets Layer (SSL) VPN feature for Cisco Small Business RV VPN Routers could allow an unauthenticated, remote attacker to cause the device to unexpectedly restart, causing a denial of service (DoS) condition. The vulnerability is due to a lack of proper input validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request over an SSL connection to the targeted device. A successful exploit could allow the attacker to cause a reload, resulting in a DoS condition.

Multiple vulnerabilities in the Cisco Discovery Protocol implementation for Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to execute code remotely or cause a reload of an affected IP camera. These vulnerabilities are due to missing checks when the IP cameras process a Cisco Discovery Protocol packet. An attacker could exploit these vulnerabilities by sending a malicious Cisco Discovery Protocol packet to the targeted IP camera. A successful exploit could allow the attacker to execute code on the affected IP camera or cause it to reload unexpectedly, resulting in a denial of service (DoS) condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

A vulnerability in Cisco Webex Network Recording Player and Cisco Webex Player for Microsoft Windows could allow an attacker to cause a process crash resulting in a Denial of service (DoS) condition for the player application on an affected system. The vulnerability exists due to insufficient validation of certain elements with a Webex recording stored in either the Advanced Recording Format (ARF) or the Webex Recording Format (WRF). An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file through a link or email attachment and persuading the user to open the file with the affected software on the local system. A successful exploit could allow the attacker to cause the Webex player application to crash when trying to view the malicious file.

A vulnerability in the packet filtering features of Cisco SD-WAN Software could allow an unauthenticated, remote attacker to bypass L3 and L4 traffic filters. The vulnerability is due to improper traffic filtering conditions on an affected device. An attacker could exploit this vulnerability by crafting a malicious TCP packet with specific characteristics and sending it to a targeted device. A successful exploit could allow the attacker to bypass the L3 and L4 traffic filters and inject an arbitrary packet into the network.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct directory traversal attacks and read sensitive files on a targeted system. The vulnerability is due to a lack of proper input validation of URLs in HTTP requests processed by an affected device. An attacker could exploit this vulnerability by sending a crafted HTTP request containing directory traversal character sequences to an affected device. A successful exploit could allow the attacker to view arbitrary files within the web services file system on the targeted device. The web services file system is enabled when the affected device is configured with either WebVPN or AnyConnect features. This vulnerability cannot be used to obtain access to ASA or FTD system files or underlying operating system (OS) files.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to inject and execute arbitrary commands with administrative privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of user-supplied input to the web UI. An attacker could exploit this vulnerability by submitting crafted input to the web UI. A successful exploit could allow an attacker to execute arbitrary commands with administrative privileges on an affected device.

Multiple vulnerabilities in the web management framework of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to gain unauthorized read access to sensitive data or cause the web management software to hang or crash, resulting in a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the Cisco IOx application environment of Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) that are running Cisco IOS Software could allow an attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the WPA2 and WPA3 security implementation of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect packet processing during the WPA2 and WPA3 authentication handshake when configured for dot1x or pre-shared key (PSK) authentication key management (AKM) with 802.11r BSS Fast Transition (FT) enabled. An attacker could exploit this vulnerability by sending a crafted authentication packet to an affected device. A successful exploit could cause an affected device to reload, resulting in a DoS condition.

A vulnerability in the implementation of the Low Power, Wide Area (LPWA) subsystem of Cisco IOS Software for Cisco 800 Series Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an unauthenticated, remote attacker to gain unauthorized read access to sensitive data or cause a denial of service (DoS) condition. The vulnerability is due to a lack of input and validation checking mechanisms for virtual-LPWA (VLPWA) protocol modem messages. An attacker could exploit this vulnerability by supplying crafted packets to an affected device. A successful exploit could allow the attacker to gain unauthorized read access to sensitive data or cause the VLPWA interface of the affected device to shut down, resulting in DoS condition.

A vulnerability in Cisco Jabber software could allow an authenticated, remote attacker to gain access to sensitive information. The vulnerability is due to improper validation of message contents. An attacker could exploit this vulnerability by sending specially crafted messages to a targeted system. A successful exploit could allow the attacker to cause the application to return sensitive authentication information to another system, possibly for use in further attacks.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV340 Series Routers could allow an authenticated, remote attacker with administrative credentials to execute arbitrary commands on the underlying operating system (OS) as a restricted user. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in Cisco Webex Network Recording Player and Cisco Webex Player for Microsoft Windows could allow an attacker to cause a process crash resulting in a Denial of service (DoS) condition for the player application on an affected system. The vulnerability exists due to insufficient validation of certain elements with a Webex recording stored in either the Advanced Recording Format (ARF) or the Webex Recording Format (WRF). An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file through a link or email attachment and persuading the user to open the file with the affected software on the local system. A successful exploit could allow the attacker to cause the Webex player application to crash when trying to view the malicious file.

A vulnerability in the web interface of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of proper input validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to cause a DoS condition. Note: This vulnerability applies to IP Version 4 (IPv4) and IP Version 6 (IPv6) HTTP traffic.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol handler of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to restart, resulting in a DoS condition.

A vulnerability in Cisco AppDynamics Network Visibility Agent could allow an unauthenticated, local attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to the inability to handle unexpected input. An attacker who has local device access could exploit this vulnerability by sending an HTTP request to the targeted service. A successful exploit could allow the attacker to cause a DoS condition by stopping the Network Agent Service on the local device.

A vulnerability in the Tool Command Language (Tcl) interpreter of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, local attacker with privileged EXEC credentials to cause a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient input validation of data passed to the Tcl interpreter. An attacker could exploit this vulnerability by executing crafted Tcl arguments on an affected device. An exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

A vulnerability in the CLI parser of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, local attacker to access files from the flash: filesystem. The vulnerability is due to insufficient application of restrictions during the execution of a specific command. An attacker could exploit this vulnerability by using a specific command at the command line. A successful exploit could allow the attacker to obtain read-only access to files that are located on the flash: filesystem that otherwise might not have been accessible.

A vulnerability in the CLI of Cisco StarOS operating system for Cisco ASR 5000 Series Routers could allow an authenticated, local attacker to elevate privileges on an affected device. The vulnerability is due to insufficient input validation of CLI commands. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user on the affected device. To exploit this vulnerability, an attacker would need to have valid credentials on an affected device and know the password for the cli test-commands command.

A vulnerability in the Plug-and-Play (PnP) subsystem of the Cisco Aironet 1800, 2800, and 3800 Series Access Points running a Lightweight Access Point (AP) or Mobility Express image could allow an unauthenticated, adjacent attacker to execute arbitrary code with root privileges. The vulnerability is due to insufficient validation of PnP server responses. The PnP feature is only active while the device does not contain a configuration, such as a first time boot or after a factory reset has been issued. An attacker with the ability to respond to PnP configuration requests from the affected device can exploit the vulnerability by returning malicious PnP responses. If a Cisco Application Policy Infrastructure Controller - Enterprise Module (APIC-EM) is available on the network, the attacker would need to exploit the issue in the short window before a valid PnP response was received. If successful, the attacker could gain the ability to execute arbitrary code with root privileges on the underlying operating system of the device. Cisco has confirmed that the only vulnerable software version is 8.3.102.0. Cisco Bug IDs: CSCvb42386.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) implementation in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to prevent IKEv2 from establishing new security associations. The vulnerability is due to incorrect handling of crafted IKEv2 SA-Init packets. An attacker could exploit this vulnerability by sending crafted IKEv2 SA-Init packets to the affected device. An exploit could allow the attacker to cause the affected device to reach the maximum incoming negotiation limits and prevent further IKEv2 security associations from being formed.

A vulnerability in the Enhanced Charging Service (ECS) functionality of Cisco ASR 5000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass the traffic classification rules on an affected device. The vulnerability is due to insufficient input validation of user traffic going through an affected device. An attacker could exploit this vulnerability by sending a malformed HTTP request to an affected device. A successful exploit could allow the attacker to bypass the traffic classification rules and potentially avoid being charged for traffic consumption.

A vulnerability in Cisco Webex Network Recording Player and Cisco Webex Player for Microsoft Windows could allow an attacker to cause a process crash resulting in a Denial of service (DoS) condition for the player application on an affected system. The vulnerability exists due to insufficient validation of certain elements with a Webex recording stored in either the Advanced Recording Format (ARF) or the Webex Recording Format (WRF). An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file through a link or email attachment and persuading the user to open the file with the affected software on the local system. A successful exploit could allow the attacker to cause the Webex player application to crash when trying to view the malicious file. This vulnerability affects Cisco Webex Network Recording Player and Webex Player releases earlier than Release 3.0 MR3 Security Patch 2 and 4.0 MR3.

A vulnerability in the Call Home feature of Cisco NX-OS Software could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of specific Call Home configuration parameters when the software is configured for transport method HTTP. An attacker could exploit this vulnerability by modifying parameters within the Call Home configuration on an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying OS.

A vulnerability in the Multipurpose Internet Mail Extensions (MIME) scanner of Cisco AsyncOS Software for Cisco Email Security Appliances (ESA) and Web Security Appliances (WSA) could allow an unauthenticated, remote attacker to bypass configured user filters on the device. Affected Products: This vulnerability affects all releases prior to the first fixed release of Cisco AsyncOS Software for Cisco ESA and Cisco WSA, both virtual and hardware appliances, that are configured with message or content filters to scan incoming email attachments on the ESA or services scanning content of web access on the WSA. More Information: SCvb91473, CSCvc76500. Known Affected Releases: 10.0.0-203 9.9.9-894 WSA10.0.0-233.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Virtual Services Container of Cisco IOS XE Software could allow an authenticated, local attacker to gain root-level privileges on an affected device. The vulnerability is due to insufficient validation of a user-supplied open virtual appliance (OVA). An attacker could exploit this vulnerability by installing a malicious OVA on an affected device.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the Cisco Discovery Protocol implementation for Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to execute code remotely or cause a reload of an affected IP camera. These vulnerabilities are due to missing checks when the IP cameras process a Cisco Discovery Protocol packet. An attacker could exploit these vulnerabilities by sending a malicious Cisco Discovery Protocol packet to the targeted IP camera. A successful exploit could allow the attacker to execute code on the affected IP camera or cause it to reload unexpectedly, resulting in a denial of service (DoS) condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

A vulnerability in a proprietary device driver in the kernel of Cisco TelePresence Multipoint Control Unit (MCU) Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. The vulnerability is due to improper size validation when reassembling fragmented IPv4 or IPv6 packets. An attacker could exploit this vulnerability by sending crafted IPv4 or IPv6 fragments to a port receiving content in Passthrough content mode. An exploit could allow the attacker to overflow a buffer. If successful, the attacker could execute arbitrary code or cause a DoS condition on the affected system. Cisco TelePresence MCU platforms TelePresence MCU 5300 Series, TelePresence MCU MSE 8510 and TelePresence MCU 4500 are affected when running software version 4.3(1.68) or later configured for Passthrough content mode. Cisco has released software updates that address this vulnerability. Workarounds that address this vulnerability are not available, but mitigations are available. Cisco Bug IDs: CSCuu67675.

A vulnerability in DNS over IPv6 packet processing for Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to improper length validation of a field in an IPv6 DNS packet. An attacker could exploit this vulnerability by sending a crafted DNS query over IPv6, which traverses the affected device. An exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. This vulnerability is specific to DNS over IPv6 traffic only.

A vulnerability in the zip decompression engine of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper validation of zip files. An attacker could exploit this vulnerability by sending an email message with a crafted zip-compressed attachment. A successful exploit could trigger a restart of the content-scanning process, causing a temporary DoS condition. This vulnerability affects Cisco AsyncOS Software for Cisco ESA releases earlier than 13.0.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to read or write arbitrary files on the underlying operating system (OS). The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to a specific CLI command. A successful exploit could allow the attacker to read or write to arbitrary files on the underlying OS.

A vulnerability in the web framework of Cisco IOS XE Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of HTTP parameters supplied by the user. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected web page parameter. The user must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects Cisco devices running Cisco IOS XE Software Release 16.2.1, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration interface was introduced in the Denali 16.2 Release of Cisco IOS XE Software. The web-based administration interface in earlier releases of Cisco IOS XE Software is not affected by this vulnerability. Cisco Bug IDs: CSCuy83069.

A vulnerability in the Extensible Messaging and Presence Protocol (XMPP) feature of Cisco Meeting Server software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition for users of XMPP conferencing applications. Other applications and processes are unaffected. The vulnerability is due to improper input validation of XMPP packets. An attacker could exploit this vulnerability by sending crafted XMPP packets to an affected device. An exploit could allow the attacker to cause process crashes and a DoS condition for XMPP conferencing applications.

A vulnerability in the Cisco Discovery Protocol implementation for the Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to execute code remotely or cause a reload of an affected IP Camera. The vulnerability is due to missing checks when processing Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to the targeted IP Camera. A successful exploit could allow the attacker to expose the affected IP Camera for remote code execution or cause it to reload unexpectedly, resulting in a denial of service (DoS) condition. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). This vulnerability is fixed in Video Surveillance 8000 Series IP Camera Firmware Release 1.0.7 and later.

A vulnerability in the Constrained Application Protocol (CoAP) implementation of Cisco IoT Field Network Director could allow an unauthenticated remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation of incoming CoAP traffic. An attacker could exploit this vulnerability by sending a malformed CoAP packet to an affected device. A successful exploit could allow the attacker to force the CoAP server to stop, interrupting communication to the IoT endpoints.

A vulnerability in the email message scanning of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass configured filters on the device. The vulnerability is due to improper validation of incoming emails. An attacker could exploit this vulnerability by sending a crafted email message to a recipient protected by the ESA. A successful exploit could allow the attacker to bypass the configured content filters, which could allow malicious content to pass through the device.

The DNS implementation in Cisco Adaptive Security Appliance (ASA) Software 7.2 before 7.2(5.16), 8.2 before 8.2(5.57), 8.3 before 8.3(2.44), 8.4 before 8.4(7.28), 8.5 before 8.5(1.24), 8.6 before 8.6(1.17), 8.7 before 8.7(1.16), 9.0 before 9.0(4.33), 9.1 before 9.1(6.1), 9.2 before 9.2(3.4), and 9.3 before 9.3(3) allows man-in-the-middle attackers to cause a denial of service (memory consumption or device outage) by triggering outbound DNS queries and then sending crafted responses to these queries, aka Bug ID CSCuq77655.