The SNMP module in Cisco IOS XR allows remote authenticated users to cause a denial of service (process restart) via crafted SNMP packets, aka Bug ID CSCue69472.

Stack-based buffer overflow in Cisco WebEx Meeting Center T27LB before SP21 EP3 and T27LC before SP22 allows user-assisted remote authenticated users to execute arbitrary code by providing a crafted .atp file and then disconnecting from a meeting. NOTE: since this is a site-specific issue with no expected action for consumers, it might be REJECTed.

Multiple buffer overflows in the Cisco WebEx Recording Format (WRF) and Advanced Recording Format (ARF) Players T27LB before SP21 EP3 and T27LC before SP22 allow remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted (1) .wrf or (2) .arf file, related to atas32.dll, a different vulnerability than CVE-2010-3041, CVE-2010-3042, and CVE-2010-3043.

A vulnerability in SSL/TLS message handler for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because incoming SSL/TLS packets are not properly processed. An attacker could exploit this vulnerability by sending a crafted SSL/TLS packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

Multiple buffer overflows in the authentication functionality in the web-server module in Cisco CiscoWorks Common Services before 4.0 allow remote attackers to execute arbitrary code via a session on TCP port (1) 443 or (2) 1741, aka Bug ID CSCti41352.

Cisco Unified Wireless Network (UWN) Solution 7.x before 7.0.98.0 on 5508 series controllers allows remote attackers to cause a denial of service (buffer leak and device crash) via ARP requests that trigger an ARP storm, aka Bug ID CSCte43508.

Cisco Unified Wireless Network (UWN) Solution 7.x before 7.0.98.0 on 5508 series controllers allows remote attackers to cause a denial of service (pbuf exhaustion and device crash) via fragmented traffic, aka Bug ID CSCtd26794.

The DCERPC inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.3 before 8.3(2.25), 8.4 before 8.4(2.5), and 8.5 before 8.5(1.13) and the Firewall Services Module (FWSM) 4.1 before 4.1(7) in Cisco Catalyst 6500 series switches and 7600 series routers allows remote attackers to cause a denial of service (device reload) via a crafted DCERPC packet, aka Bug IDs CSCtr21346 and CSCtr27521.

Multiple buffer overflows in the Cisco WebEx Recording Format (WRF) and Advanced Recording Format (ARF) Players T27LB before SP21 EP3 and T27LC before SP22 allow remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted (1) .wrf or (2) .arf file, related to atas32.dll, a different vulnerability than CVE-2010-3042, CVE-2010-3043, and CVE-2010-3044.

Buffer overflow in the Smart Call Home feature in the fabric interconnect in Cisco Unified Computing System (UCS) allows remote attackers to cause a denial of service by reading and forging control messages associated with Smart Call Home reports, aka Bug ID CSCtl00198.

The DMVPN tunnel implementation in Cisco IOS 15.2 allows remote attackers to cause a denial of service (persistent IKE state) via a large volume of hub-to-spoke traffic, aka Bug ID CSCtq39602.

Buffer overflow in the Cisco WebEx Recording Format (WRF) player T27 before LD SP32 EP10 and T28 before T28.4 allows remote attackers to execute arbitrary code via a crafted WRF file, aka Bug ID CSCtz72958.

The updateTime function in sensorApp on Cisco IPS 4200 series sensors 7.0 and 7.1 allows remote attackers to cause a denial of service (process crash and traffic-inspection outage) via network traffic, aka Bug ID CSCta96144.

Multiple buffer overflows in the administrative web interface in Cisco Unified Computing System (UCS) allow remote authenticated users to cause a denial of service (memory corruption and session termination) via long string values for unspecified parameters, aka Bug ID CSCtg20751.

Cisco Unified Presence (CUP) before 8.6(3) and Jabber Extensible Communications Platform (aka Jabber XCP) before 5.3 allow remote attackers to cause a denial of service (process crash) via a crafted XMPP stream header, aka Bug ID CSCtu32832.

Stack-based buffer overflow in the DCERPC inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.3 before 8.3(2.34), 8.4 before 8.4(4.4), 8.5 before 8.5(1.13), and 8.6 before 8.6(1.3) and the Firewall Services Module (FWSM) 4.1 before 4.1(9) in Cisco Catalyst 6500 series switches and 7600 series routers might allow remote attackers to execute arbitrary code via a crafted DCERPC packet, aka Bug IDs CSCtr21359 and CSCtr27522.

MCServer in the Cisco Management Controller in Cisco Unified Computing System (UCS) allows local users to cause a denial of service (application crash) via invalid MCTools parameters, aka Bug ID CSCtg20734.

Buffer overflow in the Cisco WebEx Recording Format (WRF) player T27 before LD SP32 EP10 and T28 before T28.4 allows remote attackers to execute arbitrary code via a crafted WRF file, aka Bug ID CSCua40962.

Heap-based buffer overflow in the Cisco WebEx Recording Format (WRF) player T27 L through SP11 EP26, T27 LB through SP21 EP10, T27 LC before SP25 EP11, T27 LD before SP32 CP2, and T28 L10N before SP1 allows remote attackers to execute arbitrary code via a crafted WRF file, aka Bug ID CSCtz72977.

Buffer overflow in the IKEv1 and IKEv2 implementations in Cisco ASA Software before 8.4(7.30), 8.7 before 8.7(1.18), 9.0 before 9.0(4.38), 9.1 before 9.1(7), 9.2 before 9.2(4.5), 9.3 before 9.3(3.7), 9.4 before 9.4(2.4), and 9.5 before 9.5(2.2) on ASA 5500 devices, ASA 5500-X devices, ASA Services Module for Cisco Catalyst 6500 and Cisco 7600 devices, ASA 1000V devices, Adaptive Security Virtual Appliance (aka ASAv), Firepower 9300 ASA Security Module, and ISA 3000 devices allows remote attackers to execute arbitrary code or cause a denial of service (device reload) via crafted UDP packets, aka Bug IDs CSCux29978 and CSCux42019.

Buffer overflow in the Overlay Transport Virtualization (OTV) GRE feature in Cisco NX-OS 5.0 through 7.3 on Nexus 7000 and 7700 devices allows remote attackers to execute arbitrary code via long parameters in a packet header, aka Bug ID CSCuy95701.

The Active Directory (AD) integration component in Cisco Identity Service Engine (ISE) before 1.2.0.899 patch 7, when AD group-membership authorization is enabled, allows remote attackers to cause a denial of service (authentication outage) via a crafted Password Authentication Protocol (PAP) authentication request, aka Bug ID CSCun25815.

Heap-based buffer overflow in the Cisco WebEx Recording Format (WRF) player T27 L through SP11 EP26, T27 LB through SP21 EP10, T27 LC before SP25 EP11, T27 LD before SP32 CP2, and T28 L10N before SP1 allows remote attackers to execute arbitrary code via a crafted size field in audio data within a WRF file, aka Bug ID CSCtz00755.

Buffer overflow in Cisco CiscoWorks Internetwork Performance Monitor (IPM) 2.6 and earlier on Windows, as distributed in CiscoWorks LAN Management Solution (LMS), allows remote attackers to execute arbitrary code via a malformed getProcessName CORBA General Inter-ORB Protocol (GIOP) request, related to a "third-party component," aka Bug ID CSCsv62350.

The SIP inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.2 before 8.2(5.17), 8.3 before 8.3(2.28), 8.4 before 8.4(2.13), 8.5 before 8.5(1.4), and 8.6 before 8.6(1.5) allows remote attackers to cause a denial of service (device reload) via a crafted SIP media-update packet, aka Bug ID CSCtr63728.

The encryption-processing feature in Cisco libSRTP before 1.5.3 allows remote attackers to cause a denial of service via crafted fields in SRTP packets, aka Bug ID CSCux00686.

Buffer overflow on Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allows remote attackers to have an unspecified impact via long IKE attributes, aka Bug ID CSCsu43121.

The Fabric Interconnect component in Cisco Unified Computing System (UCS) 2.0 allows remote attackers to cause a denial of service (process crash) via an attempted SSH session, aka Bug ID CSCtt94543.

A vulnerability in the software-based SSL/TLS message handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL/TLS decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Datagram TLS (DTLS) messages cannot be used to exploit this vulnerability.

Buffer overflow in the Cisco WebEx Recording Format (WRF) player T27 L through SP11 EP26, T27 LB through SP21 EP10, T27 LC before SP25 EP10, and T27 LD before SP32 CP1 allows remote attackers to execute arbitrary code via a crafted WRF file, a different vulnerability than CVE-2012-1335 and CVE-2012-1336.

A vulnerability in the Transaction Language 1 (TL1) code of Cisco ASR 900 Series routers could allow an unauthenticated, remote attacker to cause a reload of, or remotely execute code on, the affected system. This vulnerability affects Cisco ASR 900 Series Aggregation Services Routers (ASR902, ASR903, and ASR907) that are running the following releases of Cisco IOS XE Software: 3.17.0S 3.17.1S 3.17.2S 3.18.0S 3.18.1S. More Information: CSCuy15175. Known Affected Releases: 15.6(1)S 15.6(2)S. Known Fixed Releases: 15.6(1)S2.12 15.6(1.17)S0.41 15.6(1.17)SP 15.6(2)SP 16.4(0.183) 16.5(0.10).

Multiple SSH2 servers and clients do not properly handle packets or data elements with incorrect length specifiers, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code, as demonstrated by the SSHredder SSH protocol test suite.

Heap-based buffer overflow in the TFTP server capability in Cisco IOS 11.1, 11.2, and 11.3 allows remote attackers to cause a denial of service (reset) or modify configuration via a long filename.

A vulnerability in the processing of SSH connections for multi-instance deployments of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability is due to a lack of proper error handling when an SSH session fails to be established. An attacker could exploit this vulnerability by sending a high rate of crafted SSH connections to the instance. A successful exploit could allow the attacker to cause resource exhaustion, which causes a DoS condition on the affected device. The device must be manually reloaded to recover.

Buffer overflow in the embedded HTTP server for Cisco Catalyst switches running CatOS 5.4 through 7.3 allows remote attackers to cause a denial of service (reset) via a long HTTP request.

The TrustZone implementation in certain Broadcom MediaxChange firmware could allow an unauthenticated, physically proximate attacker to achieve arbitrary code execution in the TrustZone Trusted Execution Environment (TEE) of an affected device. This, for example, affects certain Cisco IP Phone and Wireless IP Phone products before 2021-07-07. Exploitation is possible only when the attacker can disassemble the device in order to control the voltage/current for chip pins.

The FTP service in Cisco AsyncOS on Email Security Appliance (ESA) devices 9.6.0-000 through 9.9.6-026, Web Security Appliance (WSA) devices 9.0.0-162 through 9.5.0-444, and Content Security Management Appliance (SMA) devices allows remote attackers to cause a denial of service via a flood of FTP traffic, aka Bug IDs CSCuz82907, CSCuz84330, and CSCuz86065.

A vulnerability in the Identity Firewall feature of Cisco ASA Software before 9.6(2.1) could allow an unauthenticated, remote attacker to cause a reload of the affected system or to remotely execute code. The vulnerability is due to a buffer overflow in the affected code area. An attacker could exploit this vulnerability by sending a crafted NetBIOS packet in response to a NetBIOS probe sent by the ASA software. An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or cause a reload of the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 traffic.

A vulnerability in the Import Cisco IMC configuration utility of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition and implement arbitrary commands with root privileges on an affected device. The vulnerability is due to improper bounds checking by the import-config process. An attacker could exploit this vulnerability by sending malicious packets to an affected device. When the packets are processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to implement arbitrary code on the affected device with elevated privileges.

A vulnerability in Common Internet Filesystem (CIFS) code in the Clientless SSL VPN functionality of Cisco ASA Software, Major Releases 9.0-9.6, could allow an authenticated, remote attacker to cause a heap overflow. The vulnerability is due to insufficient validation of user supplied input. An attacker could exploit this vulnerability by sending a crafted URL to the affected system. An exploit could allow the remote attacker to cause a reload of the affected system or potentially execute code. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid TCP connection is needed to perform the attack. The attacker needs to have valid credentials to log in to the Clientless SSL VPN portal. Vulnerable Cisco ASA Software running on the following products may be affected by this vulnerability: Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ASA for Firepower 4100 Series. Cisco Bug IDs: CSCvc23838.

Multiple vulnerabilities in Cisco Webex Network Recording Player for Microsoft Windows and Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerabilities exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit these vulnerabilities by sending a user a malicious ARF or WRF file through a link or email attachment and persuading the user to open the file with the affected software on the local system. A successful exploit could allow the attacker to execute arbitrary code on the affected system with the privileges of the targeted user.

A vulnerability in the Secure Sockets Layer (SSL) input packet processor of Cisco Small Business 200, 300, and 500 Series Managed Switches could allow an unauthenticated, remote attacker to cause a memory corruption on an affected device. The vulnerability is due to improper validation of HTTPS packets. An attacker could exploit this vulnerability by sending a malformed HTTPS packet to the management web interface of the affected device. A successful exploit could allow the attacker to cause an unexpected reload of the device, resulting in a denial of service (DoS) condition.

Multiple vulnerabilities in Cisco Webex Network Recording Player for Microsoft Windows and Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerabilities exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit these vulnerabilities by sending a user a malicious ARF or WRF file through a link or email attachment and persuading the user to open the file with the affected software on the local system. A successful exploit could allow the attacker to execute arbitrary code on the affected system with the privileges of the targeted user.

A vulnerability in the implementation of a specific CLI command for Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to cause a buffer overflow condition or perform command injection. This could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument of the affected CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. An attacker would need valid administrator credentials to exploit these vulnerabilities. NX-OS versions prior to 8.3(1) are affected.

libclamav in ClamAV (aka Clam AntiVirus), as used in Advanced Malware Protection (AMP) on Cisco Email Security Appliance (ESA) devices before 9.7.0-125 and Web Security Appliance (WSA) devices before 9.0.1-135 and 9.1.x before 9.1.1-041, allows remote attackers to cause a denial of service (AMP process restart) via a crafted document, aka Bug IDs CSCuv78533 and CSCuw60503.

A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or email attachment and persuading the user to open the file with the affected software on the local system. A successful exploit could allow the attacker to execute arbitrary code on the affected system.

A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or email attachment and persuading the user to open the file with the affected software on the local system. A successful exploit could allow the attacker to execute arbitrary code on the affected system.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit this vulnerability by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user. RV110W Wireless-N VPN Firewall versions prior to 1.2.2.1 are affected. RV130W Wireless-N Multifunction VPN Router versions prior to 1.0.3.45 are affected. RV215W Wireless-N VPN Router versions prior to 1.3.1.1 are affected.

A vulnerability in the vContainer of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to cause a denial of service (DoS) condition and execute arbitrary code as the root user. The vulnerability is due to improper bounds checking by the vContainer. An attacker could exploit this vulnerability by sending a malicious file to an affected vContainer instance. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected vContainer, which could result in a DoS condition that the attacker could use to execute arbitrary code as the root user.

A vulnerability in the Session Description Protocol (SDP) parser of Cisco Meeting Server could allow an unauthenticated, remote attacker to execute arbitrary code on an affected system. This vulnerability affects the following products: Cisco Meeting Server releases prior to Release 2.0.3, Acano Server releases 1.9.x prior to Release 1.9.5, Acano Server releases 1.8.x prior to Release 1.8.17. More Information: CSCva76004. Known Affected Releases: 1.8.x 1.92.0.