Cisco IOS before 15.3(1)T, when media flow-around is not used, allows remote attackers to cause a denial of service (media loops and stack memory corruption) via VoIP traffic, aka Bug ID CSCub45809.

The MLDP implementation in Cisco IOS 15.3(3)S and earlier on 7600 routers, when many VRFs are configured, allows remote attackers to cause a denial of service (chunk corruption and device reload) by establishing many multicast flows, aka Bug ID CSCue22345.

Cisco Aironet 3600 access points allow remote attackers to cause a denial of service (memory corruption and device crash) by disrupting Cisco Wireless LAN Controller communication and consequently forcing many transitions from FlexConnect mode to Standalone mode, aka Bug ID CSCuh71210.

Buffer overflow in the Smart Call Home feature in the fabric interconnect in Cisco Unified Computing System (UCS) allows remote attackers to cause a denial of service by reading and forging control messages associated with Smart Call Home reports, aka Bug ID CSCtl00198.

The multicast implementation in Cisco IOS before 15.1(1)SY allows remote attackers to cause a denial of service (Route Processor crash) by sending packets at a high rate, aka Bug ID CSCts37717.

A vulnerability in the handling of list headers in Cisco cBR Series Converged Broadband Routers could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a denial of service (DoS) condition. Cisco cBR-8 Converged Broadband Routers running vulnerable versions of Cisco IOS XE are affected. More Information: CSCux40637. Known Affected Releases: 15.5(3)S 15.6(1)S. Known Fixed Releases: 15.5(3)S2 15.6(1)S1 15.6(2)S 15.6(2)SP 16.4(1).

The PPP implementation in Cisco IOS 12.2 and 15.0 through 15.2, when Point-to-Point Termination and Aggregation (PTA) and L2TP are used, allows remote attackers to cause a denial of service (device crash) via crafted network traffic, aka Bug ID CSCtf71673.

Memory leak in Cisco IOS 12.4 and 15.0 through 15.2, and Cisco Unified Communications Manager (CUCM) 7.x, allows remote attackers to cause a denial of service (memory consumption) via a crafted response to a SIP SUBSCRIBE message, aka Bug IDs CSCto93837 and CSCtj61883.

Cisco IOS 15.0 and 15.1 and IOS XE 3.x do not properly handle the "set mpls experimental imposition" command, which allows remote attackers to cause a denial of service (device crash) via network traffic that triggers (1) fragmentation or (2) reassembly, aka Bug ID CSCtr56576.

The HTTP client in Cisco IOS 12.4 and 15.0 allows user-assisted remote attackers to cause a denial of service (device crash) via a malformed HTTP response to a request for service installation, aka Bug ID CSCts12249.

Cisco IOS 12.2, 12.3, 12.4, 15.0, and 15.1, when the data-link switching (DLSw) feature is configured, allows remote attackers to cause a denial of service (device crash) by sending a sequence of malformed packets and leveraging a "narrow timing window," aka Bug ID CSCtf74999, a different vulnerability than CVE-2007-0199, CVE-2008-1152, and CVE-2009-0629.

Race condition in Cisco Adaptive Security Appliance (ASA) 7.0(0), 7.0(2), and 7.0(4), when running with an Active/Standby configuration and when the failover LAN interface fails, allows remote attackers to cause a denial of service (standby firewall failure) by sending spoofed ARP responses from an IP address of an active firewall, which prevents the standby firewall from becoming active, aka "failover denial of service."

Cisco IOS 12.0(32)S12 through 12.0(32)S13 and 12.0(33)S3 through 12.0(33)S4, 12.0(32)SY8 through 12.0(32)SY9, 12.2(33)SXI1 through 12.2(33)SXI2, 12.2XNC before 12.2(33)XNC2, 12.2XND before 12.2(33)XND1, and 12.4(24)T1; and IOS XE 2.3 through 2.3.1t and 2.4 through 2.4.0; when RFC4893 BGP routing is enabled, allows remote attackers to cause a denial of service (device reload) by using an RFC4271 peer to send a malformed update, aka Bug ID CSCta33973.

The (1) Airline Product Set (aka ALPS), (2) Serial Tunnel Code (aka STUN), (3) Block Serial Tunnel Code (aka BSTUN), (4) Native Client Interface Architecture (NCIA) support, (5) Data-link switching (aka DLSw), (6) Remote Source-Route Bridging (RSRB), (7) Point to Point Tunneling Protocol (PPTP), (8) X.25 for Record Boundary Preservation (RBP), (9) X.25 over TCP (XOT), and (10) X.25 Routing features in Cisco IOS 12.2 and 12.4 allows remote attackers to cause a denial of service (device reload) via a series of crafted TCP packets.

The Instant Messenger (IM) inspection engine in Cisco Adaptive Security Appliance (ASA) and Cisco PIX security appliance 7.2.x before 7.2(4), 8.0.x before 8.0(3)10, and 8.1.x before 8.1(1)2 allows remote attackers to cause a denial of service via a crafted packet.

Cisco Digital Content Manager (DCM) 15.0.0 might allow remote ad servers to cause a denial of service (reboot) via malformed ad messages, aka Bug ID CSCur13999.

Cisco FWSM 3.x before 3.1(3.18), when authentication is configured to use "aaa authentication match" or "aaa authentication include", allows remote attackers to cause a denial of service (device reboot) via a malformed HTTPS request.

Race condition in Cisco IOS 12.2SCH in the Performance Routing Engine (PRE) module on uBR10000 devices, when NetFlow and an MPLS IPv6 VPN are configured, allows remote attackers to cause a denial of service (PXF process crash) by sending malformed MPLS 6VPE packets quickly, aka Bug ID CSCud83396.

Cisco IOS 15.1(4)M2 on Cisco 1800 ISR devices, when the ISDN Basic Rate Interface is enabled, allows remote attackers to cause a denial of service (device hang) by leveraging knowledge of the ISDN phone number to trigger an interrupt timer collision during entropy collection, leading to an invalid state of the hardware encryption module, aka Bug ID CSCul77897.

The ScanSafe module in Cisco IOS 15.3(3)M allows remote attackers to cause a denial of service (device reload) via HTTPS packets that require tower processing, aka Bug ID CSCum97038.

Cisco 9900 Unified IP phones allow remote attackers to cause a denial of service (unregistration) via a crafted SIP header, aka Bug ID CSCul24898.

Cisco IOS XE 3.7S(.1) and earlier allows remote attackers to cause a denial of service (Packet Processor crash) via fragmented MPLS IP packets, aka Bug ID CSCul00709.

Cisco Adaptive Security Appliance (ASA) Software 8.4(.6) and earlier, when using an unsupported configuration with overlapping criteria for filtering and inspection, allows remote attackers to cause a denial of service (traffic loop and device crash) via a packet that triggers multiple matches, aka Bug ID CSCui45606.

The IPv6 implementation in Cisco Adaptive Security Appliance (ASA) Software 9.1.3 and earlier, when NAT64 or NAT66 is enabled, does not properly process NAT rules, which allows remote attackers to cause a denial of service (device reload) via crafted packets, aka Bug ID CSCue34342.

The VPN authentication functionality in Cisco Adaptive Security Appliance (ASA) Software allows remote attackers to cause a denial of service (device reload) by sending many username-from-cert IKE requests, aka Bug ID CSCua91108.

The Cisco Express Forwarding processing module in Cisco IOS XE allows remote attackers to cause a denial of service (device reload) via crafted MPLS packets that are not properly handled during IP header validation, aka Bug ID CSCuj23992.

The regex engine in the BGP implementation in Cisco NX-OS, when a complex regular expression is configured for inbound routes, allows remote attackers to cause a denial of service (device reload) via a crafted AS path set, aka Bug ID CSCuf49554.

Cisco ASA CX Context-Aware Security Software allows remote attackers to cause a denial of service (device reload) via crafted TCP packets that appear to have been forwarded by a Cisco Adaptive Security Appliances (ASA) device, aka Bug ID CSCue88386.

The HTTP server in Cisco IOS on Catalyst switches does not properly handle TCP socket events, which allows remote attackers to cause a denial of service (device crash) via crafted packets on TCP port (1) 80 or (2) 443, aka Bug ID CSCuc53853.

Race condition on Cisco Adaptive Security Appliances (ASA) devices allows remote attackers to cause a denial of service (CPU consumption or device reload) by establishing multiple connections, leading to improper handling of hash lookups for secondary flows, aka Bug IDs CSCue31622 and CSCuc71272.

Buffer overflow in the WRF parsing functionality in the Cisco WebEx Recording Format (WRF) player T26 before SP49 EP40 and T27 before SP28 allows remote attackers to execute arbitrary code via a crafted WRF file.

Buffer overflow in the cuil component in Cisco Telepresence System Integrator C Series 4.x before TC4.2.0 allows remote authenticated users to cause a denial of service (endpoint reboot or process crash) or possibly execute arbitrary code via a long location parameter to the getxml program, aka Bug ID CSCtq46496.

The Cisco IP Phone 7940 allows remote attackers to cause a denial of service (reboot) via a large amount of TCP SYN packets (syn flood) to arbitrary ports, as demonstrated to port 80.

Buffer overflow in the web-based management interface on the Cisco Linksys WRT54GC router with firmware before 1.06.1 allows remote attackers to cause a denial of service (device crash) via a long string in a POST request.

Buffer overflow on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 1.6.x; Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x; Cisco TelePresence endpoint devices with software 1.2.x through 1.6.x; and Cisco TelePresence Manager 1.2.x, 1.3.x, 1.4.x, 1.5.x, and 1.6.2 allows remote attackers to execute arbitrary code via a crafted Cisco Discovery Protocol packet, aka Bug IDs CSCtd75769, CSCtd75766, CSCtd75754, and CSCtd75761.

Cisco Unified Wireless Network (UWN) Solution 7.x before 7.0.98.0 on 5508 series controllers allows remote attackers to cause a denial of service (buffer leak and device crash) via ARP requests that trigger an ARP storm, aka Bug ID CSCte43508.

Cisco Unified Wireless Network (UWN) Solution 7.x before 7.0.98.0 on 5508 series controllers allows remote attackers to cause a denial of service (pbuf exhaustion and device crash) via fragmented traffic, aka Bug ID CSCtd26794.

Multiple buffer overflows in the Cisco WebEx Recording Format (WRF) and Advanced Recording Format (ARF) Players T27LB before SP21 EP3 and T27LC before SP22 allow remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted (1) .wrf or (2) .arf file, a different vulnerability than CVE-2010-3041, CVE-2010-3042, and CVE-2010-3044.

Multiple stack-based buffer overflows in the Cisco WebEx Recording Format (WRF) and Advanced Recording Format (ARF) Players T27LB before SP21 EP3 and T27LC before SP22 allow remote attackers to execute arbitrary code via a crafted (1) .wrf or (2) .arf file, related to use of a function pointer in a callback mechanism.

Multiple buffer overflows in the Cisco WebEx Recording Format (WRF) and Advanced Recording Format (ARF) Players T27LB before SP21 EP3 and T27LC before SP22 allow remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted (1) .wrf or (2) .arf file, a different vulnerability than CVE-2010-3041, CVE-2010-3043, and CVE-2010-3044.

Stack-based buffer overflow in Cisco WebEx Meeting Center T27LB before SP21 EP3 and T27LC before SP22 allows user-assisted remote authenticated users to execute arbitrary code by providing a crafted .atp file and then disconnecting from a meeting. NOTE: since this is a site-specific issue with no expected action for consumers, it might be REJECTed.

Multiple buffer overflows in the authentication functionality in the web-server module in Cisco CiscoWorks Common Services before 4.0 allow remote attackers to execute arbitrary code via a session on TCP port (1) 443 or (2) 1741, aka Bug ID CSCti41352.

Heap-based buffer overflow in atas32.dll in the Cisco WebEx WRF Player 26.x before 26.49.32 (aka T26SP49EP32) for Windows, 27.x before 27.10.x (aka T27SP10) for Windows, 26.x before 26.49.35 for Mac OS X and Linux, and 27.x before 27.11.8 for Mac OS X and Linux allows remote attackers to cause a denial of service (application crash) or execute arbitrary code via a crafted WebEx Recording Format (WRF) file, a different vulnerability than CVE-2009-2876 and CVE-2009-2879.

Multiple buffer overflows in the Cisco WebEx Recording Format (WRF) and Advanced Recording Format (ARF) Players T27LB before SP21 EP3 and T27LC before SP22 allow remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted (1) .wrf or (2) .arf file, related to atas32.dll, a different vulnerability than CVE-2010-3041, CVE-2010-3042, and CVE-2010-3043.

An issue was discovered in the Cisco WebEx Extension before 1.0.7 on Google Chrome, the ActiveTouch General Plugin Container before 106 on Mozilla Firefox, the GpcContainer Class ActiveX control plugin before 10031.6.2017.0126 on Internet Explorer, and the Download Manager ActiveX control plugin before 2.1.0.10 on Internet Explorer. A vulnerability in these Cisco WebEx browser extensions could allow an unauthenticated, remote attacker to execute arbitrary code with the privileges of the affected browser on an affected system. This vulnerability affects the browser extensions for Cisco WebEx Meetings Server and Cisco WebEx Centers (Meeting Center, Event Center, Training Center, and Support Center) when they are running on Microsoft Windows. The vulnerability is a design defect in an application programing interface (API) response parser within the extension. An attacker that can convince an affected user to visit an attacker-controlled web page or follow an attacker-supplied link with an affected browser could exploit the vulnerability. If successful, the attacker could execute arbitrary code with the privileges of the affected browser.

A vulnerability in Common Internet Filesystem (CIFS) code in the Clientless SSL VPN functionality of Cisco ASA Software, Major Releases 9.0-9.6, could allow an authenticated, remote attacker to cause a heap overflow. The vulnerability is due to insufficient validation of user supplied input. An attacker could exploit this vulnerability by sending a crafted URL to the affected system. An exploit could allow the remote attacker to cause a reload of the affected system or potentially execute code. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid TCP connection is needed to perform the attack. The attacker needs to have valid credentials to log in to the Clientless SSL VPN portal. Vulnerable Cisco ASA Software running on the following products may be affected by this vulnerability: Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ASA for Firepower 4100 Series. Cisco Bug IDs: CSCvc23838.

A Denial of Service vulnerability in the remote login functionality for Cisco NX-OS Software running on Cisco Nexus 9000 Series Switches could allow an unauthenticated, remote attacker to cause a process used for login to terminate unexpectedly and the login attempt to fail. There is no impact to user traffic flowing through the device. The attacker could use either a Telnet or an SSH client for the remote login attempt. Affected Products: This vulnerability affects Cisco Nexus 9000 Series Switches that are running Cisco NX-OS Software and are configured to allow remote Telnet connections to the device. More Information: CSCuy25824. Known Affected Releases: 7.0(3)I3(1) 8.3(0)CV(0.342) 8.3(0)CV(0.345). Known Fixed Releases: 8.3(0)CV(0.362) 8.0(1) 7.0(3)IED5(0.19) 7.0(3)IED5(0) 7.0(3)I4(1) 7.0(3)I4(0.8) 7.0(3)I2(2e) 7.0(3)F1(1.22) 7.0(3)F1(1) 7.0(3)F1(0.230).

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCuu76493.

Cisco Unified Presence Server (CUPS) 8.6, 9.0, and 9.1 before 9.1.1 allows remote attackers to cause a denial of service (CPU consumption) via crafted packets to the SIP TCP port, aka Bug ID CSCua89930.

Stack-based buffer overflow in the DCERPC inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.3 before 8.3(2.34), 8.4 before 8.4(4.4), 8.5 before 8.5(1.13), and 8.6 before 8.6(1.3) and the Firewall Services Module (FWSM) 4.1 before 4.1(9) in Cisco Catalyst 6500 series switches and 7600 series routers might allow remote attackers to execute arbitrary code via a crafted DCERPC packet, aka Bug IDs CSCtr21359 and CSCtr27522.