Verax NMS prior to 2.1.0 leaks connection details when any user executes a Repair Table action

IBM Security Verify Bridge contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 196618.

Vulnerability in the Elasticsearch database used in the of Cisco SD-WAN vManage software could allow an unauthenticated, remote attacker to access the Elasticsearch configuration database of an affected device with the privileges of the elasticsearch user. These vulnerability is due to the presence of a static username and password configured on the vManage. An attacker could exploit this vulnerability by sending a crafted HTTP request to a reachable vManage on port 9200. A successful exploit could allow the attacker to view the Elasticsearch database content. There are workarounds that address this vulnerability.

Use of Hard-coded Password vulnerability in FTP function on Mitsubishi Electric Corporation MELSEC iQ-R Series EtherNet/IP module RJ71EIP91 and MELSEC iQ-F Series EtherNet/IP module FX5-ENET/IP allows a remote unauthenticated attacker to obtain a hard-coded password and access to the module via FTP.

Brocade SANnav OVA before v2.3.1 and v2.3.0a contain hard-coded credentials in the documentation that appear as the appliance's root password. The vulnerability could allow an unauthenticated attacker full access to the Brocade SANnav appliance.

PHOENIX CONTACT TC ROUTER 3002T-4G through 2.05.3, TC ROUTER 2002T-3G through 2.05.3, TC ROUTER 3002T-4G VZW through 2.05.3, TC ROUTER 3002T-4G ATT through 2.05.3, TC CLOUD CLIENT 1002-4G through 2.03.17, and TC CLOUD CLIENT 1002-TXTX through 1.03.17 devices contain a hardcoded certificate (and key) that is used by default for web-based services on the device. Impersonation, man-in-the-middle, or passive decryption attacks are possible if the generic certificate is not replaced by a device-specific certificate during installation.

A vulnerability was determined in yeqifu carRental up to 3fabb7eae93d209426638863980301d6f99866b3. Affected by this vulnerability is an unknown functionality of the file /carRental_war/druid/login.html of the component Druid. Executing manipulation can lead to hard-coded credentials. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases.

An issue was discovered in EyesOfNetwork 5.3. The installation uses the same API key (hardcoded as EONAPI_KEY in include/api_functions.php for API version 2.4.2) by default for all installations, hence allowing an attacker to calculate/guess the admin access token.

Programi Bilanc Build 007 Release 014 31.01.2020 supplies a .exe file containing several hardcoded credentials to different servers that allow remote attackers to gain access to the complete infrastructure including the website, update server, and external issue tracking tools.

The Secure Monitor in Microchip Atmel ATSAMA5 products use a hardcoded key to encrypt and authenticate secure applets.

The EPSON iPrint application 6.6.3 for Android contains hard-coded API and Secret keys for the Dropbox, Box, Evernote and OneDrive services.

In Moxa PT-7528 series firmware, Version 4.0 or lower, and PT-7828 series firmware, Version 3.9 or lower, the affected products use a hard-coded cryptographic key, which increases the possibility that confidential data can be recovered.

Dell EMC OpenManage Integration for Microsoft System Center (OMIMSSC) for SCCM and SCVMM versions prior to 7.2.1 contain a hard-coded cryptographic key vulnerability. A remote unauthenticated attacker may exploit this vulnerability to gain access to the appliance data for remotely managed devices.

An Authentication Bypass vulnerability exists in the web interface in Zavio IP Cameras through 1.6.03 due to a hardcoded admin account found in boa.conf, which lets a remote malicious user obtain sensitive information.

A Security Bypass vulnerability exists in TP-LINK IP Cameras TL-SC 3130, TL-SC 3130G, 3171G, 4171G, and 3130 1.6.18P12 due to default hard-coded credentials for the administrative Web interface, which could let a malicious user obtain unauthorized access to CGI files.

An Authentication vulnerability exists in D-LINK WCS-1100 1.02, TESCO DCS-2121 1.05_TESCO, TESCO DCS-2102 1.05_TESCO, DCS-7510 1.00, DCS-7410 1.00, DCS-6410 1.00, DCS-5635 1.01, DCS-5605 1.01, DCS-5230L 1.02, DCS-5230 1.02, DCS-3430 1.02, DCS-3411 1.02, DCS-3410 1.02, DCS-2121 1.06_FR, DCS-2121 1.06, DCS-2121 1.05_RU, DCS-2102 1.06_FR, DCS-2102 1.06, DCS-2102 1.05_RU, DCS-1130L 1.04, DCS-1130 1.04_US, DCS-1130 1.03, DCS-1100L 1.04, DCS-1100 1.04_US, and DCS-1100 1.03 due to hard-coded credentials that serve as a backdoor, which allows remote attackers to access the RTSP video stream.

A hardcoded secret key, in CA Unified Infrastructure Management 8.5.1, 8.5, and 8.4.7, allows attackers to access sensitive information.

The Civi - Job Board & Freelance Marketplace WordPress Theme plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.1.4 via hard-coded credentials. This makes it possible for unauthenticated attackers to extract sensitive data including LinkedIn client and secret keys.

A hardcoded passphrase, in CA Unified Infrastructure Management 8.5.1, 8.5, and 8.4.7, allows attackers to access sensitive information.

IBM QRadar 7.3.0 to 7.3.3 Patch 2 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-ForceID: 175845.

The SNMP daemon in UTStarcom F1000 VOIP WIFI Phone s2.0 running VxWorks 5.5.1 with kernel WIND 2.6 has hard-coded public credentials that cannot be changed, which allows attackers to obtain sensitive information.

RunAsSpc 4.0 uses a universal and recoverable encryption key. In possession of a file encrypted by RunAsSpc, an attacker can recover the credentials that were used.

Cisco IP Phone (VoIP) 7920 1.0(8) contains certain hard-coded ("fixed") public and private SNMP community strings that cannot be changed, which allows remote attackers to obtain sensitive information.

IBM QRadar Network Security 5.4.0 and 5.5.0 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 174337.

IBM Data Risk Manager (iDNA) 2.0.6 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 184983.

A vulnerability in the default configuration of the Simple Network Management Protocol (SNMP) feature of Cisco Wide Area Application Services (WAAS) Software could allow an unauthenticated, remote attacker to read data from an affected device via SNMP. The vulnerability is due to a hard-coded, read-only community string in the configuration file for the SNMP daemon. An attacker could exploit this vulnerability by using the static community string in SNMP version 2c queries to an affected device. A successful exploit could allow the attacker to read any data that is accessible via SNMP on the affected device. Note: The static credentials are defined in an internal configuration file and are not visible in the current operation configuration ('running-config') or the startup configuration ('startup-config'). Cisco Bug IDs: CSCvi40137.

An Incorrect Password Management issue was discovered in SMA Solar Technology products. Default passwords exist that are rarely changed. User passwords will almost always be default. Installer passwords are expected to be default or similar across installations installed by the same company (but are sometimes changed). Hidden user accounts have (at least in some cases, though more research is required to test this for all hidden user accounts) a fixed password for all devices; it can never be changed by a user. Other vulnerabilities exist that allow an attacker to get the passwords of these hidden user accounts. NOTE: the vendor reports that it has no influence on the allocation of passwords, and that global hardcoded master passwords do not exist. Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected

Online Course Registration v1.0 was discovered to contain hardcoded credentials in the source code which allows attackers access to the control panel if compromised.

Use of a hard-coded cryptographic key to encrypt password data in CLI configuration in FortiManager 6.2.3 and below, FortiAnalyzer 6.2.3 and below may allow an attacker with access to the CLI configuration or the CLI backup file to decrypt the sensitive data, via knowledge of the hard-coded key.

A hard-coded credentials issue was discovered on Mimosa Client Radios before 2.2.3, Mimosa Backhaul Radios before 2.2.3, and Mimosa Access Points before 2.2.3. These devices run Mosquitto, a lightweight message broker, to send information between devices. By using the vendor's hard-coded credentials to connect to the broker on any device (whether it be an AP, Client, or Backhaul model), an attacker can view all the messages being sent between the devices. If an attacker connects to an AP, the AP will leak information about any clients connected to it, including the serial numbers, which can be used to remotely factory reset the clients via a page in their web interface.

ZTE E8810/E8820/E8822 series routers have an information leak vulnerability, which is caused by hard-coded MQTT service access credentials on the device. The remote attacker could use this credential to connect to the MQTT server, so as to obtain information about other devices by sending specific topics. This affects:<ZXHN E8810, ZXHN E8820, ZXHN E8822><E8810 V1.0.26, E8810 V2.0.1, E8820 V1.1.3L, E8820 V2.0.13, E8822 V2.0.13>

In Moxa EDS-G516E Series firmware, Version 5.2 or lower, the affected products use a hard-coded cryptographic key, increasing the possibility that confidential data can be recovered.

On the TP-Link TL-SG108E 1.0, there is a hard-coded ciphering key (a long string beginning with Ei2HNryt). This affects the 1.1.2 Build 20141017 Rel.50749 firmware.

A Use of Hard-Coded Password issue was discovered in Phoenix Broadband PowerAgent SC3 BMS, all versions prior to v6.87. Use of a hard-coded password may allow unauthorized access to the device.

A Use of Hard-Coded Cryptographic Key issue was discovered in Hyundai Motor America Blue Link 3.9.5 and 3.9.4. The application uses a hard-coded decryption password to protect sensitive user information.

An issue was discovered on Athom Homey and Homey Pro devices before 5.0.0. ZigBee hub devices should generate a unique Standard Network Key that is then exchanged with all enrolled devices so that all inter-device communication is encrypted. However, the cited Athom products use another widely known key that is designed for testing purposes: "01030507090b0d0f00020406080a0c0d" (the decimal equivalent of 1 3 5 7 9 11 13 15 0 2 4 6 8 10 12 13), which is human generated and static across all issued devices.

Use of Hard-coded Credentials vulnerability in Utarit Information Technologies SoliPay Mobile App allows Read Sensitive Strings Within an Executable.This issue affects SoliPay Mobile App: before 5.0.8.

The MobileIron agents through 2021-03-22 for Android and iOS contain a hardcoded API key, used to communicate with the MobileIron SaaS discovery API, as demonstrated by Mobile@Work (aka com.mobileiron). The key is in com/mobileiron/registration/RegisterActivity.java and can be used for api/v1/gateway/customers/servers requests. NOTE: Vendor states that this is an opt-in feature to the product - it is not enabled by default and customers cannot enable it without an explicit email to support. At this time, they do not plan change to make any changes to this feature.

auth_db_config.py in Pyftpd 0.8.4 contains hard-coded usernames and passwords for the (1) test, (2) user, and (3) roxon accounts, which allows remote attackers to read arbitrary files from the FTP server.

IBM Concert Software 1.0.0 through 1.1.0 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data.

A vulnerability has been discovered in the firmware of Paxton Paxton10 before 4.6 SR6. The firmware file, rootfs.tar.gz, contains hard-coded credentials for the Twilio API. A remote attacker who obtains a copy of the firmware can extract these credentials. This could allow the attacker to gain unauthorized access to the associated Twilio account, leading to information disclosure, potential service disruption, and unauthorized use of the Twilio services.

It is possible to download the configuration backup without authorization and decrypt included passwords using hardcoded static key.

SuperAGI v0.0.13 was discovered to use a hardcoded key for encryption operations. This vulnerability can lead to the disclosure of information and communications.

Archery v1.10.0 uses a non-random or static IV for Cipher Block Chaining (CBC) mode in AES encryption. This vulnerability can lead to the disclosure of information and communications.

IBM Security Guardium Key Lifecycle Manager 4.3 contains plain text hard-coded credentials or other secrets in source code repository. IBM X-Force ID: 271220.

An issue was discovered on V-SOL V1600D V2.03.69 OLT devices. The string K0LTdi@gnos312$ is compared to the password provided by the the remote attacker. If it matches, access is provided.

The D-Link router DIR-880L 1.07 is vulnerable to credentials disclosure in telnet service through decompilation of firmware, that allows an unauthenticated attacker to gain access to the firmware and to extract sensitive data.

A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). Project data stored on the device, which is accessible via port 10005/tcp, can be decrypted due to a hardcoded encryption key. The security vulnerability could be exploited by an unauthenticated attacker with network access to port 10005/tcp. No user interaction is required to exploit this security vulnerability. The vulnerability impacts confidentiality of the device. At the time of advisory publication no public exploitation of this security vulnerability was known.