A vulnerability was found in Netgear WNR614 1.1.0.28_1.0.1WW. It has been classified as critical. This affects an unknown part of the component URL Handler. The manipulation with the input %00currentsetting.htm leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This issue appears to have been circulating as an 0day since 2024.

A vulnerability, which was classified as very critical, was found in Netgear DGND3700 1.1.00.15_1.00.15NA. This affects an unknown part of the file /BRS_top.html of the component Basic Authentication. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Other products might be affected as well. The vendor was contacted early about this disclosure.

NETGEAR ProSAFE Network Management System MyHandlerInterceptor Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of NETGEAR ProSAFE Network Management System. Authentication is not required to exploit this vulnerability. The specific flaw exists within the MyHandlerInterceptor class. The issue results from improper implementation of the authentication mechanism. An attacker can leverage this vulnerability to bypass authentication on the system. . Was ZDI-CAN-19718.

Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass via the NtgrBak key.

An Authentication Bypass vulnerability exists in NETGEAR Centria WNDR4700 Firmware 1.0.0.34 in http://<router_ip>/apply.cgi?/hdd_usr_setup.htm that when visited by any user, authenticated or not, causes the router to no longer require a password to access the web administration portal.

An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. The web management interface (setup.cgi) has an authentication bypass and other problems that ultimately allow an attacker to remotely compromise the device from a malicious webpage. The attacker sends an FW_remote.htm&todo=cfg_init request without a cookie, reads the Set-Cookie header in the 401 Unauthorized response, and then repeats the FW_remote.htm&todo=cfg_init request with the specified cookie.

Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass due to the server skipping checks for URLs containing a ".jpg".

Netgear RAX30 (AX2400), prior to version 1.0.6.74, was affected by an authentication bypass vulnerability, allowing an unauthenticated attacker to gain administrative access to the device's web management interface by resetting the admin password.

Cross-site scripting vulnerability in web administration interface for NetGear RT314 and RT311 Gateway Routers allows remote attackers to execute arbitrary script on another client via a URL that contains the script.

SNMP service in Atmel 802.11b VNET-B Access Point 1.3 and earlier, as used in Netgear ME102 and Linksys WAP11, accepts arbitrary community strings with requested MIB modifications, which allows remote attackers to obtain sensitive information such as WEP keys, cause a denial of service, or gain access to the network.

(1) boardData102.php, (2) boardData103.php, (3) boardDataJP.php, (4) boardDataNA.php, and (5) boardDataWW.php in Netgear WN604 before 3.3.3 and WN802Tv2, WNAP210v2, WNAP320, WNDAP350, WNDAP360, and WNDAP660 before 3.5.5.0 allow remote attackers to execute arbitrary commands.

NETGEAR JNR1010 devices before 1.0.0.32 have Incorrect Access Control because the ok value of the auth cookie is a special case.

The NETGEAR WNR2000v5 router allows an administrator to perform sensitive actions by invoking the apply.cgi URL on the web server of the device. This special URL is handled by the embedded web server (uhttpd) and processed accordingly. The web server also contains another URL, apply_noauth.cgi, that allows an unauthenticated user to perform sensitive actions on the device. This functionality can be exploited to change the router settings (such as the answers to the password-recovery questions) and achieve remote code execution.

The NETGEAR WNR2000v5 router contains a buffer overflow in the hidden_lang_avi parameter when invoking the URL /apply.cgi?/lang_check.html. This buffer overflow can be exploited by an unauthenticated attacker to achieve remote code execution.

A vulnerability has been found in Netgear WNDR3700v2 1.0.1.14 and classified as critical. This vulnerability affects unknown code of the component Web Interface. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-221152.

NETGEAR Nighthawk WiFi Mesh systems and routers are affected by a stack-based buffer overflow vulnerability. This affects MR60 before 1.1.7.132, MS60 before 1.1.7.132, R6900P before 1.3.3.154, R7000P before 1.3.3.154, R7960P before 1.4.4.94, and R8000P before 1.4.4.94.

NETGEAR FVS318 running firmware 2.4, and possibly other versions, allows remote attackers to bypass the filters using hex encoded URLs, as demonstrated using a hex encoded file extension.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D7800 before 1.0.1.56, R7800 before 1.0.2.68, R8900 before 1.0.4.26, and R9000 before 1.0.4.26.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D7800 before 1.0.1.34, DM200 before 1.0.0.50, EX2700 before 1.0.1.32, EX6100v2 before 1.0.1.70, EX6150v2 before 1.0.1.70, EX6200v2 before 1.0.1.62, EX6400 before 1.0.1.78, EX7300 before 1.0.1.62, EX8000 before 1.0.0.114, R6100 before 1.0.1.22, R7500 before 1.0.0.122, R7500v2 before 1.0.3.26, R7800 before 1.0.2.40, R8900 before 1.0.3.10, R9000 before 1.0.3.10, WN2000RPTv3 before 1.0.1.26, WN3000RPv2 before 1.0.0.56, WN3000RPv3 before 1.0.2.66, WN3100RPv2 before 1.0.0.56, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.54, WNDR4500v3 before 1.0.0.54, and WNR2000v5 before 1.0.0.64.

Certain NETGEAR devices are affected by authentication bypass. This affects RBK852 before 3.2.10.11, RBR850 before 3.2.10.11, RBS850 before 3.2.10.11, CBR40 before 2.5.0.10, EAX20 before 1.0.0.48, MK62 before 1.0.6.110, MR60 before 1.0.6.110, MS60 before 1.0.6.110, RBK752 before 3.2.10.10, RBR750 before 3.2.10.10, and RBS750 before 3.2.10.10.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects WAC120 before 2.1.7, WAC505 before 5.0.5.4, WAC510 before 5.0.5.4, WNAP320 before 3.7.11.4, WNAP210v2 before 3.7.11.4, WNDAP350 before 3.7.11.4, WNDAP360 before 3.7.11.4, WNDAP660 before 3.7.11.4, WNDAP620 before 2.1.7, WND930 before 2.1.5, and WN604 before 3.3.10.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects D7800 before 1.0.1.34, R7800 before 1.0.2.46, and R9000 before 1.0.3.16.

NETGEAR WAC104 devices before 1.0.4.15 are affected by an authentication bypass vulnerability in /usr/sbin/mini_httpd, allowing an unauthenticated attacker to invoke any action by adding the &currentsetting.htm substring to the HTTP query, a related issue to CVE-2020-27866. This directly allows the attacker to change the web UI password, and eventually to enable debug mode (telnetd) and gain a shell on the device as the admin limited-user account (however, escalation to root is simple because of weak permissions on the /etc/ directory).

A vulnerability has been found in Netgear R6900P and R7000P 1.3.3.154 and classified as critical. Affected by this vulnerability is the function sub_16C4C of the component HTTP Header Handler. The manipulation of the argument Host leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in Netgear EX6200 1.0.3.94. This issue affects the function sub_3D0BC. The manipulation of the argument host leads to buffer overflow. The attack may be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

Certain NETGEAR devices are affected by a hardcoded password. This affects D3600 before 1.0.0.76 and D6000 before 1.0.0.76.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects R6700 before 1.0.1.48, R7900 before 1.0.2.16, R6900 before 1.0.1.48, R7000P before 1.3.1.44, R6900P before 1.3.1.44, R6250 before 1.0.4.30, R6300v2 before 1.0.4.32, R6400 before 1.0.1.44, R6400v2 before 1.0.2.60, R7000 before 1.0.9.34, R7100LG before 1.0.0.48, R7300 before 1.0.0.68, R8000 before 1.0.4.18, R8000P before 1.4.1.24, R7900P before 1.4.1.24, R8500 before 1.0.2.122, R8300 before 1.0.2.122, WN2500RPv2 before 1.0.1.54, EX3700 before 1.0.0.72, EX3800 before 1.0.0.72, EX6000 before 1.0.0.32, EX6100 before 1.0.2.24, EX6120 before 1.0.0.42, EX6130 before 1.0.0.24, EX6150v1 before 1.0.0.42, EX6200 before 1.0.3.88, EX7000 before 1.0.0.66, D7000v2 before 1.0.0.51, D6220 before 1.0.0.46, D6400 before 1.0.0.82, and D8500 before 1.0.3.42.

Buffer Overflow in Netgear R8000 Router with firmware v1.0.4.56 allows remote attackers to execute arbitrary code or cause a denial-of-service by sending a crafted POST to '/bd_genie_create_account.cgi' with a sufficiently long parameter 'register_country'.

Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow via parameter openvpn_server_ip.

A Command Injection vulnerability exists in NETGEAR WNR2000v4 version 1.0.0.70. When using HTTP for SOAP authentication, command execution occurs during the process after successful authentication.

In Netgear RAX30 V1.0.10.94, a PHP-FPM misconfiguration vulnerability is caused by not following the specification to only limit FPM to .php extensions. An attacker may exploit this by uploading malicious scripts disguised with alternate extensions and tricking the web server into executing them as PHP, bypassing security mechanisms based on file extension filtering. This may lead to remote code execution (RCE), information disclosure, or full system compromise.

Certain NETGEAR devices are affected by authentication bypass. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker via the vulnerable /sqfs/lib/libsal.so.0.0 library used by a CGI application, as demonstrated by setup.cgi?token=';$HTTP_USER_AGENT;' with an OS command in the User-Agent field. This affects GC108P before 1.0.7.3, GC108PP before 1.0.7.3, GS108Tv3 before 7.0.6.3, GS110TPPv1 before 7.0.6.3, GS110TPv3 before 7.0.6.3, GS110TUPv1 before 1.0.4.3, GS710TUPv1 before 1.0.4.3, GS716TP before 1.0.2.3, GS716TPP before 1.0.2.3, GS724TPPv1 before 2.0.4.3, GS724TPv2 before 2.0.4.3, GS728TPPv2 before 6.0.6.3, GS728TPv2 before 6.0.6.3, GS752TPPv1 before 6.0.6.3, GS752TPv2 before 6.0.6.3, MS510TXM before 1.0.2.3, and MS510TXUP before 1.0.2.3.

In Netgear Orbi RBR750 firmware before V7.2.6.21, there is a stack-based buffer overflow in /usr/sbin/httpd.

NETGEAR ProSAFE Network Management System has Java Debug Wire Protocol (JDWP) listening on port 11611 and it is remotely accessible by unauthenticated users, allowing attackers to execute arbitrary code.

A vulnerability, which was classified as critical, has been found in Netgear JWNR2000v2 1.0.0.11. Affected by this issue is the function get_cur_lang_ver. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects WAC505 before 5.0.5.4, WAC510 before 5.0.5.4, WAC120 before 2.1.7, WN604 before 3.3.10, WNAP320 before 3.7.11.4, WNAP210v2 before 3.7.11.4, WNDAP350 before 3.7.11.4, WNDAP360 before 3.7.11.4, WNDAP660 before 3.7.11.4, WNDAP620 before 2.1.7, and WND930 before 2.1.5.

A vulnerability was found in Netgear EX6200 1.0.3.94. It has been declared as critical. This vulnerability affects the function sub_54340. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in Netgear JWNR2000v2 1.0.0.11. Affected is the function check_language_file. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been declared as critical. Affected by this vulnerability is the function cmd_wireless. The manipulation of the argument host leads to command injection. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in Netgear JWNR2000v2 1.0.0.11. Affected by this vulnerability is the function default_version_is_new. The manipulation of the argument host leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been classified as critical. Affected is the function sub_4238E8. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Netgear EX6200 1.0.3.94 and classified as critical. This vulnerability affects the function sub_3C8EC. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Netgear JWNR2000v2 1.0.0.11. This affects the function sub_41A914. The manipulation of the argument host leads to buffer overflow. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Netgear EX6200 1.0.3.94. This affects the function sub_3C03C. The manipulation of the argument host leads to buffer overflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Netgear EX6200 1.0.3.94 and classified as critical. Affected by this vulnerability is the function sub_47F7C. The manipulation of the argument host leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear EX6200 1.0.3.94 and classified as critical. Affected by this issue is the function sub_503FC. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear EX6200 1.0.3.94. It has been classified as critical. This affects the function sub_54014. The manipulation of the argument host leads to buffer overflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

Certain NETGEAR devices are affected by CSRF. This affects EX3700 before 1.0.0.90, EX3800 before 1.0.0.90, EX6120 before 1.0.0.64, and EX6130 before 1.0.0.44.