NETGEAR ProSAFE Network Management System MyHandlerInterceptor Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of NETGEAR ProSAFE Network Management System. Authentication is not required to exploit this vulnerability. The specific flaw exists within the MyHandlerInterceptor class. The issue results from improper implementation of the authentication mechanism. An attacker can leverage this vulnerability to bypass authentication on the system. . Was ZDI-CAN-19718.

Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass via the NtgrBak key.

NETGEAR Centria WNDR4700 devices with firmware 1.0.0.34 allow authentication bypass.

A vulnerability was found in Netgear WNR614 1.1.0.28_1.0.1WW. It has been classified as critical. This affects an unknown part of the component URL Handler. The manipulation with the input %00currentsetting.htm leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This issue appears to have been circulating as an 0day since 2024.

A vulnerability, which was classified as very critical, was found in Netgear DGND3700 1.1.00.15_1.00.15NA. This affects an unknown part of the file /BRS_top.html of the component Basic Authentication. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Other products might be affected as well. The vendor was contacted early about this disclosure.

An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. The web management interface (setup.cgi) has an authentication bypass and other problems that ultimately allow an attacker to remotely compromise the device from a malicious webpage. The attacker sends an FW_remote.htm&todo=cfg_init request without a cookie, reads the Set-Cookie header in the 401 Unauthorized response, and then repeats the FW_remote.htm&todo=cfg_init request with the specified cookie.

Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass due to the server skipping checks for URLs containing a ".jpg".

Netgear RAX30 (AX2400), prior to version 1.0.6.74, was affected by an authentication bypass vulnerability, allowing an unauthenticated attacker to gain administrative access to the device's web management interface by resetting the admin password.

Cross-site scripting vulnerability in web administration interface for NetGear RT314 and RT311 Gateway Routers allows remote attackers to execute arbitrary script on another client via a URL that contains the script.

SNMP service in Atmel 802.11b VNET-B Access Point 1.3 and earlier, as used in Netgear ME102 and Linksys WAP11, accepts arbitrary community strings with requested MIB modifications, which allows remote attackers to obtain sensitive information such as WEP keys, cause a denial of service, or gain access to the network.

Certain NETGEAR devices are affected by CSRF. This affects EX3700 before 1.0.0.90, EX3800 before 1.0.0.90, EX6120 before 1.0.0.64, and EX6130 before 1.0.0.44.

(1) boardData102.php, (2) boardData103.php, (3) boardDataJP.php, (4) boardDataNA.php, and (5) boardDataWW.php in Netgear WN604 before 3.3.3 and WN802Tv2, WNAP210v2, WNAP320, WNDAP350, WNDAP360, and WNDAP660 before 3.5.5.0 allow remote attackers to execute arbitrary commands.

NETGEAR JNR1010 devices before 1.0.0.32 have Incorrect Access Control because the ok value of the auth cookie is a special case.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System 1.6.0.26. Authentication is not required to exploit this vulnerability. The specific flaw exists within the MFileUploadController class. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-12124.

The NETGEAR WNR2000v5 router allows an administrator to perform sensitive actions by invoking the apply.cgi URL on the web server of the device. This special URL is handled by the embedded web server (uhttpd) and processed accordingly. The web server also contains another URL, apply_noauth.cgi, that allows an unauthenticated user to perform sensitive actions on the device. This functionality can be exploited to change the router settings (such as the answers to the password-recovery questions) and achieve remote code execution.

The NETGEAR WNR2000v5 router contains a buffer overflow in the hidden_lang_avi parameter when invoking the URL /apply.cgi?/lang_check.html. This buffer overflow can be exploited by an unauthenticated attacker to achieve remote code execution.

In NETGEAR Nighthawk X10-R9000 prior to 1.0.4.26, an attacker may execute arbitrary system commands as root by sending a specially-crafted MAC address to the "NETGEAR Genie" SOAP endpoint at AdvancedQoS:GetCurrentBandwidthByMAC. Although this requires QoS being enabled, advanced QoS being enabled, and a valid authentication JWT, additional vulnerabilities (CVE-2019-12510) allow an attacker to interact with the entire SOAP API without authentication. Additionally, DNS rebinding techniques may be used to exploit this vulnerability remotely. Exploiting this vulnerability is somewhat involved. The following limitations apply to the payload and must be overcome for successful exploitation: - No more than 17 characters may be used. - At least one colon must be included to prevent mangling. - A single-quote and meta-character must be used to break out of the existing command. - Parent command remnants after the injection point must be dealt with. - The payload must be in all-caps. Despite these limitations, it is still possible to gain access to an interactive root shell via this vulnerability. Since the web server assigns certain HTTP headers to environment variables with all-caps names, it is possible to insert a payload into one such header and reference the subsequent environment variable in the injection point.

NETGEAR FVS318 running firmware 2.4, and possibly other versions, allows remote attackers to bypass the filters using hex encoded URLs, as demonstrated using a hex encoded file extension.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR AC1200 R6220 Firmware version 1.1.0.86 Smart WiFi Router. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of path strings. By inserting a null byte into the path, the user can skip most authentication checks. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-8616.

NETGEAR ProSafe SSL VPN firmware FVS336Gv2 and FVS336Gv3 was discovered to contain a SQL injection vulnerability via USERDBDomains.Domainname at cgi-bin/platform.cgi.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects AC2100 before 1.2.0.72, AC2400 before 1.2.0.72, AC2600 before 1.2.0.72, CBK40 before 2.5.0.10, CBR40 before 2.5.0.10, D7800 before 1.0.1.58, EAX20 before 1.0.0.36, EAX80 before 1.0.1.62, EX7500 before 1.0.0.68, MK62 before 1.0.5.102, MR60 before 1.0.5.102, MS60 before 1.0.5.102, R6120 before 1.0.0.70, R6220 before 1.1.0.100, R6230 before 1.1.0.100, R6260 before 1.1.0.76, R6330 before 1.1.0.76, R6350 before 1.1.0.76, R6400 before 1.0.1.62, R6400v2 before 1.0.4.98, R6700 before 1.0.2.16, R6700v2 before 1.2.0.72, R6700v3 before 1.0.4.98, R6800 before 1.2.0.72, R6850 before 1.1.0.76, R6900P before 1.3.2.124, R6900 before 1.0.2.16, R6900v2 before 1.2.0.72, R7000 before 1.0.11.106, R7000P before 1.3.2.124, R7200 before 1.2.0.72, R7350 before 1.2.0.72, R7400 before 1.2.0.72, R7450 before 1.2.0.72, R7800 before 1.0.2.74, R7850 before 1.0.5.60, R7900 before 1.0.4.26, R7900P before 1.4.1.62, R7960P before 1.4.1.62, R8000 before 1.0.4.58, R8000P before 1.4.1.62, R8900 before 1.0.5.24, R9000 before 1.0.5.24, RAX120 before 1.0.1.136, RAX15 before 1.0.1.64, RAX20 before 1.0.1.64, RAX200 before 1.0.2.102, RAX45 before 1.0.2.64, RAX50 before 1.0.2.64, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, RBK12 before 2.6.1.44, RBR10 before 2.6.1.44, RBS10 before 2.6.1.44, RBK20 before 2.6.1.38, RBR20 before 2.6.1.36, RBS20 before 2.6.1.38, RBK40 before 2.6.1.38, RBR40 before 2.6.1.36, RBS40 before 2.6.1.38, RBK50 before 2.6.1.40, RBR50 before 2.6.1.40, RBS50 before 2.6.1.40, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK842 before 3.2.16.6, RBR840 before 3.2.16.6, RBS840 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RS400 before 1.5.0.48, XR300 before 1.0.3.50, XR450 before 2.3.2.66, XR500 before 2.3.2.66, and XR700 before 1.0.1.34.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects CBR40 before 2.5.0.10, D6220 before 1.0.0.60, D6400 before 1.0.0.94, D7000v2 before 1.0.0.62, D8500 before 1.0.3.50, DC112A before 1.0.0.48, DGN2200v4 before 1.0.0.114, EAX20 before 1.0.0.36, EAX80 before 1.0.1.62, EX3700 before 1.0.0.84, EX3800 before 1.0.0.84, EX3920 before 1.0.0.84, EX6000 before 1.0.0.44, EX6100 before 1.0.2.28, EX6120 before 1.0.0.54, EX6130 before 1.0.0.36, EX6150 before 1.0.0.46, EX6200 before 1.0.3.94, EX6920 before 1.0.0.54, EX7000 before 1.0.1.90, EX7500 before 1.0.0.68, MK62 before 1.0.5.102, MR60 before 1.0.5.102, MS60 before 1.0.5.102, R6250 before 1.0.4.42, R6300v2 before 1.0.4.42, R6400 before 1.0.1.62, R6400v2 before 1.0.4.98, R6700v3 before 1.0.4.98, R6700 before 1.0.2.16, R6900P before 1.3.2.124, R6900 before 1.0.2.16, R7000 before 1.0.11.106, R7000P before 1.3.2.124, R7100LG before 1.0.0.56, R7850 before 1.0.5.60, R7900 before 1.0.4.26, R7900P before 1.4.1.62, R7960P before 1.4.1.62, R8000 before 1.0.4.58, R8000P before 1.4.1.62, R8300 before 1.0.2.134, R8500 before 1.0.2.134, RAX15 before 1.0.1.64, RAX20 before 1.0.1.64, RAX200 before 1.0.2.102, RAX45 before 1.0.2.32, RAX50 before 1.0.2.32, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK842 before 3.2.16.6, RBR840 before 3.2.16.6, RBS840 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RBS40V-200 before 1.0.0.46, RBW30 before 2.5.0.4, RS400 before 1.5.0.48, WN2500RPv2 before 1.0.1.56, WN3500RP before 1.0.0.28, WNDR3400v3 before 1.0.1.32, WNR1000v3 before 1.0.2.78, WNR2000v2 before 1.2.0.12, WNR3500Lv2 before 1.2.0.62, and XR300 before 1.0.3.50.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.78, D6200 before 1.1.00.32, D7000 before 1.0.1.68, D7800 before 1.0.1.56, DM200 before 1.0.0.61, EX2700 before 1.0.1.52, EX6100v2 before 1.0.1.76, EX6150v2 before 1.0.1.76, EX6200v2 before 1.0.1.74, EX6400 before 1.0.2.140, EX7300 before 1.0.2.140, EX8000 before 1.0.1.186, JR6150 before 1.0.1.18, PR2000 before 1.0.0.28, R6020 before 1.0.0.38, R6050 before 1.0.1.18, R6080 before 1.0.0.38, R6120 before 1.0.0.46, R6220 before 1.1.0.80, R6230 before 1.1.0.80, R6260 before 1.1.0.40, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900v2 before 1.2.0.36, R7500v2 before 1.0.3.40, R7800 before 1.0.2.62, R8900 before 1.0.4.12, R9000 before 1.0.4.12, RBK20 before 2.3.0.28, RBR20 before 2.3.0.28, RBS20 before 2.3.0.28, RBK40 before 2.3.0.28, RBR40 before 2.3.0.28, RBS40 before 2.3.0.28, RBK50 before 2.3.0.32, RBR50 before 2.3.0.32, RBS50 before 2.3.0.32, WN2000RPTv3 before 1.0.1.34, WN3000RPv2 before 1.0.0.78, WN3000RPv2 before 1.0.0.78, WN3000RPv3 before 1.0.2.78, WN3100RPv2 before 1.0.0.66, WNR2000v5 before 1.0.0.70, WNR2020 before 1.1.0.62, XR450 before 2.3.2.32, and XR500 before 2.3.2.32.

Certain NETGEAR devices are affected by authentication bypass. This affects D6200 before 1.1.00.40, D7000 before 1.0.1.78, R6020 before 1.0.0.42, R6080 before 1.0.0.42, R6050 before 1.0.1.26, JR6150 before 1.0.1.26, R6120 before 1.0.0.66, R6220 before 1.1.0.100, R6260 before 1.1.0.66, R6700v2 before 1.2.0.62, R6800 before 1.2.0.62, R6900v2 before 1.2.0.62, AC2100 before 1.2.0.62, AC2400 before 1.2.0.62, AC2600 before 1.2.0.62, R7450 before 1.2.0.62, and WNR2020 before 1.1.0.62.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR R6400, R6700, R7000, R7850, R7900, R8000, RS400, and XR300 routers with firmware 1.0.4.84_10.0.58. Authentication is not required to exploit this vulnerability. The specific flaw exists within the check_ra service. A crafted raePolicyVersion in a RAE_Policy.json file can trigger an overflow of a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9852.

A vulnerability, which was classified as critical, has been found in Netgear EX6200 1.0.3.94. This issue affects the function sub_3D0BC. The manipulation of the argument host leads to buffer overflow. The attack may be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Netgear JWNR2000v2 1.0.0.11. Affected by this issue is the function get_cur_lang_ver. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been classified as critical. Affected is the function sub_4238E8. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Netgear EX6200 1.0.3.94. This affects the function sub_3C03C. The manipulation of the argument host leads to buffer overflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Netgear R6900P and R7000P 1.3.3.154 and classified as critical. Affected by this vulnerability is the function sub_16C4C of the component HTTP Header Handler. The manipulation of the argument Host leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

NETGEAR R7800 devices before 1.0.2.68 are affected by remote code execution by unauthenticated attackers.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects R6400v2 before 1.0.4.84, R6700 before 1.0.2.8, R6700v3 before 1.0.4.84, R6900 before 1.0.2.8, and R7900 before 1.0.3.10.

A Command Injection vulnerability exists in NETGEAR WNR2000v4 version 1.0.0.70. When using HTTP for SOAP authentication, command execution occurs during the process after successful authentication.

NETGEAR ProSAFE Network Management System has Java Debug Wire Protocol (JDWP) listening on port 11611 and it is remotely accessible by unauthenticated users, allowing attackers to execute arbitrary code.

Buffer Overflow vulnerability in NETGEAR R6400v2 before version 1.0.4.118, allows remote unauthenticated attackers to execute arbitrary code via crafted URL to httpd.

In Netgear Orbi RBR750 firmware before V7.2.6.21, there is a stack-based buffer overflow in /usr/sbin/httpd.

A vulnerability has been found in Netgear WNDR3700v2 1.0.1.14 and classified as critical. This vulnerability affects unknown code of the component Web Interface. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-221152.

netgear R6250 Firmware Version 1.0.4.48 is vulnerable to Buffer Overflow after authentication.

There is a command injection vulnerability in the Netgear R6250 router with Firmware Version 1.0.4.48. If an attacker gains web management privileges, they can inject commands into the post request parameters, thereby gaining shell privileges.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.24, CBR750 before 3.2.18.2, EAX20 before 1.0.0.58, EAX80 before 1.0.1.68, EX3700 before 1.0.0.94, EX3800 before 1.0.0.94, EX6120 before 1.0.0.64, EX6130 before 1.0.0.44, EX7000 before 1.0.1.104, EX7500 before 1.0.0.74, LAX20 before 1.1.6.28, MR60 before 1.0.6.116, MS60 before 1.0.6.116, R6300v2 before 1.0.4.52, R6400 before 1.0.1.70, R6400v2 before 1.0.4.106, R6700v3 before 1.0.4.106, R6900P before 1.3.3.140, R7000 before 1.0.11.126, R7000P before 1.3.3.140, R7100LG before 1.0.0.72, R7850 before 1.0.5.74, R7900 before 1.0.4.46, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, R8300 before 1.0.2.154, R8500 before 1.0.2.154, RAX15 before 1.0.3.96, RAX20 before 1.0.3.96, RAX200 before 1.0.4.120, RAX35v2 before 1.0.3.96, RAX40v2 before 1.0.3.96, RAX43 before 1.0.3.96, RAX45 before 1.0.3.96, RAX50 before 1.0.3.96, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, RBS850 before 3.2.17.12, RBS850 before 3.2.17.12, RS400 before 1.5.1.80, XR1000 before 1.0.0.58, and XR300 before 1.0.3.68.

NETGEAR D7000 devices before 1.0.1.82 are affected by authentication bypass.

Buffer Overflow vulnerability found in Netgear R6900 v.1.0.2.26, R6700v3 v.1.0.4.128, R6700 v.1.0.0.26 allows a remote attacker to execute arbitrary code and cause a denial ofservice via the getInputData parameter of the fwSchedule.cgi page.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D7000v2 before 1.0.0.74, LAX20 before 1.1.6.28, MK62 before 1.0.6.116, MR60 before 1.0.6.116, MS60 before 1.0.6.116, RAX15 before 1.0.3.96, RAX20 before 1.0.3.96, RAX200 before 1.0.4.120, RAX45 before 1.0.3.96, RAX50 before 1.0.3.96, RAX43 before 1.0.3.96, RAX40v2 before 1.0.3.96, RAX35v2 before 1.0.3.96, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, RBS850 before 3.2.17.12, and XR1000 before 1.0.0.58.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects AC2100 before 1.2.0.88, AC2400 before 1.2.0.88, AC2600 before 1.2.0.88, R6220 before 1.1.0.110, R6230 before 1.1.0.110, R6260 before 1.1.0.84, R6330 before 1.1.0.84, R6350 before 1.1.0.84, R6700v2 before 1.2.0.88, R6800 before 1.2.0.88, R6850 before 1.1.0.84, R6900v2 before 1.2.0.88, R7200 before 1.2.0.88, R7350 before 1.2.0.88, R7400 before 1.2.0.88, and R7450 before 1.2.0.88.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, EAX20 before 1.0.0.58, EAX80 before 1.0.1.68, EX7500 before 1.0.0.74, LAX20 before 1.1.6.28, MK62 before 1.0.6.116, MR60 before 1.0.6.116, MS60 before 1.0.6.116, R6400 before 1.0.1.70, R6400v2 before 1.0.4.118, R6700v3 before 1.0.4.118, R6900P before 1.3.3.140, R7000 before 1.0.11.116, R7000P before 1.3.3.140, R7850 before 1.0.5.68, R7900 before 1.0.4.38, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.68, R8000P before 1.4.2.84, RAX15 before 1.0.3.96, RAX20 before 1.0.3.96, RAX200 before 1.0.4.120, RAX35v2 before 1.0.3.96, RAX40v2 before 1.0.3.96, RAX43 before 1.0.3.96, RAX45 before 1.0.3.96, RAX50 before 1.0.3.96, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, RBS850 before 3.2.17.12, RS400 before 1.5.1.80, XR1000 before 1.0.0.58, and XR300 before 1.0.3.68.