Belkin N900 router (F9K1104v1) contains an Authentication Bypass using "Javascript debugging".

An authentication bypass exists in the web management interface in Belkin F5D8236-4 v2.

cgi-bin/setup_dns.exe on the Belkin F5D7230-4 router with firmware 9.01.10 does not require authentication, which allows remote attackers to perform administrative actions, as demonstrated by changing a DNS server via the dns1_1, dns1_2, dns1_3, and dns1_4 parameters. NOTE: it was later reported that F5D7632-4V6 with firmware 6.01.08 is also affected.

A stack-based buffer overflow in the ChangeFriendlyName() function of Belkin Smart Outlet V2 F7c063 firmware_2.00.11420.OWRT.PVT_SNSV2 allows attackers to cause a Denial of Service (DoS) via a crafted UPNP request.

Stack-based Buffer Overflow vulnerability in libUPnPHndlr.so in Belkin Wemo Insight Smart Plug allows remote attackers to bypass local security protection via a crafted HTTP post packet.

The web interface to the Belkin Wireless G router and ADSL2 modem F5D7632-4V6 with firmware 6.01.08 allows remote attackers to bypass authentication and gain administrator privileges via a direct request to (1) statusprocess.exe, (2) system_all.exe, or (3) restore.exe in cgi-bin/. NOTE: the setup_dns.exe vector is already covered by CVE-2008-1244.

A remote unauthenticated user can execute commands as root in the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to proxy.cgi.

A remote unauthenticated user can execute commands as root in the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to twonky_command.cgi.

In Belkin N300 Firmware 1.00.08, the script located at /setting_hidden.asp, which is accessible before and after configuring the device, exhibits multiple remote command injection vulnerabilities. The following parameters in the [form name] form; [list vulnerable parameters], are not properly sanitized after being submitted to the web interface in a POST request. With specially crafted parameters, it is possible to inject a an OS command which will be executed with root privileges, as the web interface, and all processes on the device, run as root.

Belkin Wemo Switch before WeMo_US_2.00.2176.PVT could allow remote attackers to upload arbitrary files onto the system.

Buffer overflow in login.cgi in MiniHttpd in Belkin N750 Router with firmware before F9K1103_WW_1.10.17m allows remote attackers to execute arbitrary code via a long string in the jump parameter.

The Belkin WeMo Home Automation firmware before 3949 has a hardcoded GPG key, which makes it easier for remote attackers to spoof firmware updates and execute arbitrary code via crafted signed data.

The control panel on the Belkin F5D7230-4 router with firmware 9.01.10 maintains authentication state by IP address, which allows remote attackers to bypass authentication by establishing a session from a source IP address of a previously authenticated user, a different vulnerability than CVE-2005-3802.

The Belkin N300 (F7D7301v1) router allows remote attackers to bypass authentication and gain privileges via vectors related to incorrect validation of the HTTP Authorization header.

The web server in Belkin Wireless G Plus MIMO Router F5D9230-4 does not require authentication for SaveCfgFile.cgi, which allows remote attackers to read and modify configuration via a direct request to SaveCfgFile.cgi.

A vulnerability in the TP-Link Archer c20 router with firmware version V6.6_230412 and earlier permits unauthorized individuals to bypass the authentication of some interfaces under the /cgi directory. When adding Referer: http://tplinkwifi.net to the the request, it will be recognized as passing the authentication.

The firmware on GateHouse; Harris BGAN RF-7800B-VU204 and BGAN RF-7800B-DU204; Hughes Network Systems 9201, 9450, and 9502; Inmarsat; Japan Radio JUE-250 and JUE-500; and Thuraya IP satellite terminals does not require authentication for sessions on TCP port 1827, which allows remote attackers to execute arbitrary code via unspecified protocol operations.

D-Link DIR-615 Wireless N 300 Router allows authentication bypass via a modified POST request to login.cgi. This issue occurs because it fails to validate the password field. Successful exploitation of this issue allows an attacker to take control of the affected device.

A vulnerability has been identified in SINAMICS S200 (All versions with serial number beginning with SZVS8, SZVS9, SZVS0 or SZVSN and the FS number is 02). The affected device contains an unlocked bootloader. This security oversight enables attackers to inject malicious code, or install untrusted firmware. The intrinsic security features designed to protect against data manipulation and unauthorized access are compromised when the bootloader is not secured.

On certain Brother devices, authorization is mishandled by including a valid AuthCookie cookie in the HTTP response to a failed login attempt. Affected models are: MFC-J6973CDW MFC-J4420DW MFC-8710DW MFC-J4620DW MFC-L8850CDW MFC-J3720 MFC-J6520DW MFC-L2740DW MFC-J5910DW MFC-J6920DW MFC-L2700DW MFC-9130CW MFC-9330CDW MFC-9340CDW MFC-J5620DW MFC-J6720DW MFC-L8600CDW MFC-L9550CDW MFC-L2720DW DCP-L2540DW DCP-L2520DW HL-3140CW HL-3170CDW HL-3180CDW HL-L8350CDW HL-L2380DW ADS-2500W ADS-1000W ADS-1500W.

AIRTAME HDMI dongle with firmware before 2.2.0 allows unauthenticated access to a big part of the management interface. It is possible to extract all information including the Wi-Fi password, reboot, or force a software update at an arbitrary time.

The Lifeline Donation plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 1.2.6. This is due to insufficient verification on the user being supplied during the checkout through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email.

The integrated web server on Siemens SCALANCE X-200 switches with firmware before 4.5.0 and X-200IRT switches with firmware before 5.1.0 does not properly enforce authentication requirements, which allows remote attackers to perform administrative actions via requests to the management interface.

The network enabled distribution of Kura before 2.1.0 takes control over the device's firewall setup but does not allow IPv6 firewall rules to be configured. Still the Equinox console port 5002 is left open, allowing to log into Kura without any user credentials over unencrypted telnet and executing commands using the Equinox "exec" command. As the process is running as "root" full control over the device can be acquired. IPv6 is also left in auto-configuration mode, accepting router advertisements automatically and assigns a MAC address based IPv6 address.

EMC NetWorker may potentially be vulnerable to an unauthenticated remote code execution vulnerability in the Networker Client execution service (nsrexecd) when oldauth authentication method is used. An unauthenticated remote attacker could send arbitrary commands via RPC service to be executed on the host system with the privileges of the nsrexecd service, which runs with administrative privileges.

License Manager Service of YOKOGAWA products (CENTUM VP (R5.01.00 - R6.06.00), CENTUM VP Entry Class (R5.01.00 - R6.06.00), ProSafe-RS (R3.01.00 - R4.04.00), PRM (R4.01.00 - R4.02.00), B/M9000 VP(R7.01.01 - R8.02.03)) allows remote attackers to bypass access restriction to send malicious files to the PC where License Manager Service runs via unspecified vectors.

An authentication bypass vulnerability in anji-plus AJ-Report up to v1.4.2 allows unauthenticated attackers to execute arbitrary code via a crafted URL.

An Authentication Bypass vulnerability exists in Gitea before 1.5.0, which could let a malicious user gain privileges. If captured, the TOTP code for the 2FA can be submitted correctly more than once.

authentik is an open-source Identity Provider. Prior to versions 2023.8.4 and 2023.10.2, when the default admin user has been deleted, it is potentially possible for an attacker to set the password of the default admin user without any authentication. authentik uses a blueprint to create the default admin user, which can also optionally set the default admin users' password from an environment variable. When the user is deleted, the `initial-setup` flow used to configure authentik after the first installation becomes available again. authentik 2023.8.4 and 2023.10.2 fix this issue. As a workaround, ensure the default admin user (Username `akadmin`) exists and has a password set. It is recommended to use a very strong password for this user, and store it in a secure location like a password manager. It is also possible to deactivate the user to prevent any logins as akadmin.

An issue was discovered in dnaTools dnaLIMS 4-2015s13. dnaLIMS is vulnerable to unauthenticated command execution through an improperly protected administrative web shell (cgi-bin/dna/sysAdmin.cgi POST requests).

The Adaptive Security Device Management (ASDM) remote-management feature in Cisco Adaptive Security Appliance (ASA) Software 8.2.x before 8.2(5.46), 8.3.x before 8.3(2.39), 8.4.x before 8.4(6), 8.5.x before 8.5(1.18), 8.6.x before 8.6(1.12), 8.7.x before 8.7(1.7), 9.0.x before 9.0(3.1), and 9.1.x before 9.1(2.6) does not properly implement the authentication-certificate option, which allows remote attackers to bypass authentication via a TCP session to an ASDM interface, aka Bug ID CSCuh44815.

Improper Authentication vulnerability in Elementor Elementor Website Builder allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Elementor Website Builder: from n/a through 3.16.4.

AVTECH AVN801 DVR has a security bypass via the administration login captcha

Zoho ManageEngine Access Manager Plus before 4203 allows anyone to view a few data elements (e.g., access control details) and modify a few aspects of the application state.

Zoho ManageEngine PAM360 before build 5303 allows attackers to modify a few aspects of application state because of a filter bypass in which authentication is not required.

Adobe Commerce versions 2.4.7-p2, 2.4.6-p7, 2.4.5-p9, 2.4.4-p10 and earlier are affected by an Improper Authentication vulnerability that could result in privilege escalation. An attacker could exploit this vulnerability to gain unauthorized access or elevated privileges within the application. Exploitation of this issue does not require user interaction.

A vulnerability in the web-based GUI of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication and execute actions with administrator privileges. The vulnerability is due to a processing error in the role-based access control (RBAC) of URLs. An attacker could exploit this vulnerability by sending API commands via HTTP to a particular URL without prior authentication. An exploit could allow the attacker to perform any actions in Cisco Prime Home with administrator privileges. This vulnerability affects Cisco Prime Home versions from 6.3.0.0 to the first fixed release 6.5.0.1. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCvb49837.

An exploitable vulnerability exists in the generation of authentication token functionality of Circle with Disney. Specially crafted network packets can cause a valid authentication token to be returned to the attacker resulting in authentication bypass. An attacker can send a series of packets to trigger this vulnerability.

The authentication algorithm of the WebHMI portal is sound, but the implemented mechanism can be bypassed as the result of a separate weakness that is primary to the authentication error.

Unspecified vulnerability in a cryptographic feature in MailEnable Standard Edition before 1.93, Professional Edition before 1.73, and Enterprise Edition before 1.21 leads to "weakened authentication security" with unknown impact and attack vectors. NOTE: due to lack of details, it is not clear whether this is the same as CVE-2006-1792.

An issue in compop.ca ONLINE MALL v.3.5.3 allows a remote attacker to execute arbitrary code via the rid, tid, et, and ts parameters.

The impacted products, when configured to use SSO, are affected by an improper authentication vulnerability. This vulnerability allows the application to accept manual entry of any active directory (AD) account provisioned in the application without supplying a password, resulting in access to the application as the supplied AD account, with all associated privileges.

OpUtils in Zoho ManageEngine OpManager 12.5 before 125490 mishandles authentication for a few audit directories.

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

EMC Network Configuration Manager (NCM) 9.3.x, EMC Network Configuration Manager (NCM) 9.4.0.x, EMC Network Configuration Manager (NCM) 9.4.1.x, EMC Network Configuration Manager (NCM) 9.4.2.x contains an Improper Authentication vulnerability that could potentially be exploited by malicious users to compromise the affected system.

Cisco Linksys Routers EA2700, EA3500, E4200, EA4500: A bug can cause an unsafe TCP port to open which leads to unauthenticated access

In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26, use of the ap_get_basic_auth_pw() by third-party modules outside of the authentication phase may lead to authentication requirements being bypassed.

4MOSAn GCB Doctor’s login page has improper validation of Cookie, which allows an unauthenticated remote attacker to bypass authentication by code injection in cookie, and arbitrarily manipulate the system or interrupt services by upload and execution of arbitrary files.

The component controlla_login function in HotelDruid Hotel Management Software v3.0.3 generates a predictable session token, allowing attackers to bypass authentication via bruteforce attacks.