This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DAP-2610 Firmware v2.01RC067 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of passwords. The issue results from the lack of proper password checking. An attacker can leverage this vulnerability to execute arbitrary code in the context of root. Was ZDI-CAN-10082.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-867, DIR-878, and DIR-882 routers with firmware 1.10B04. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from the lack of proper implementation of the authentication algorithm. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of the router. Was ZDI-CAN-9470.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-1935 1.03 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from the lack of proper implementation of the authentication algorithm. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-16142.

A vulnerability was found in D-Link DI-7003GV2 24.04.18D1 R(68125). It has been classified as critical. This affects the function sub_497DE4 of the file /H5/netconfig.asp. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

An issue in D-Link DI-8100 16.07.26A1 allows a remote attacker to bypass administrator login authentication

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1860 firmware version 1.04B03 WiFi extenders. Authentication is not required to exploit this vulnerability. The specific flaw exists within the uhttpd service, which listens on TCP port 80 by default. The issue results from incorrect string matching logic when accessing protected pages. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of the device. Was ZDI-CAN-10894.

This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of D-Link DVA-2800 and DSL-2888A routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the dhttpd service, which listens on TCP port 8008 by default. The issue results from incorrect string matching logic when accessing protected pages. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-10912.

D-Link DIR-890L FW1.10 A1 is vulnerable to Authentication bypass.

An issue was discovered on D-Link DIR-878 1.12B01 devices. At the /HNAP1 URI, an attacker can log in with a blank password.

D-Link DAP-1860 devices before v1.04b03 Beta allow access to administrator functions without authentication via the HNAP_AUTH header timestamp value. In HTTP requests, part of the HNAP_AUTH header is the timestamp used to determine the time when the user sent the request. If this value is equal to the value stored in the device's /var/hnap/timestamp file, the request will pass the HNAP_AUTH check function.

D-Link DIR-601 B1 2.00NA devices are vulnerable to authentication bypass. They do not check for authentication at the server side and rely on client-side validation, which is bypassable. NOTE: this is an end-of-life product.

SharePort Web Access on D-Link DIR-868L REVB through 2.03, DIR-885L REVA through 1.20, and DIR-895L REVA through 1.21 devices allows Authentication Bypass, as demonstrated by a direct request to folder_view.php or category_view.php.

A vulnerability has been found in D-Link DHP-W310AV 1.04 and classified as critical. This vulnerability affects unknown code. The manipulation leads to authentication bypass by spoofing. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

/web/Lib/Action/IndexAction.class.php in D-Link Central WiFi Manager CWM(100) before v1.03R0100_BETA6 allows remote attackers to execute arbitrary PHP code via a cookie because a cookie's username field allows eval injection, and an empty password bypasses authentication.

D-Link DSL-G256DG version vBZ_1.00.27 web management interface allows authentication bypass via an unspecified method.

A flaw in the authentication mechanism in the Login Panel of router D-Link DSL-3782 (A1_WI_20170303 || SWVer="V100R001B012" FWVer="3.10.0.24" FirmVer="TT_77616E6771696F6E67") allows unauthenticated attackers to perform arbitrary modification (read, write) to passwords and configurations meanwhile an administrator is logged into the web panel.

D-Link DIR-822 C1 before v3.11B01Beta, DIR-822-US C1 before v3.11B01Beta, DIR-850L A* before v1.21B08Beta, DIR-850L B* before v2.22B03Beta, and DIR-880L A* before v1.20B02Beta devices allow authentication bypass.

D-Link DIR845L v1.00-v1.03 contains a Static Default Credential vulnerability in /etc/init0.d/S80telnetd.sh.

An issue was discovered on D-Link DIR-850L 1.21WW devices. A partially completed WPA handshake is sufficient for obtaining full access to the wireless network. A client can access the network by sending packets on Data Frames to the AP without encryption.

On D-Link DIR-823G devices, ExportSettings.sh, upload_settings.cgi, GetDownLoadSyslog.sh, and upload_firmware.cgi do not require authentication, which allows remote attackers to execute arbitrary code.

An issue was discovered on D-Link DVA-5592 A1_WI_20180823 devices. If the PIN of the page "/ui/cbpc/login" is the default Parental Control PIN (0000), it is possible to bypass the login form by editing the path of the cookie "sid" generated by the page. The attacker will have access to the router control panel with administrator privileges.

An issue was discovered on D-Link DIR-809 A1 through 1.09, A2 through 1.11, and Guest Zone through 1.09 devices. One can bypass authentication mechanisms to download the configuration file.

D-Link DIR-601 A1 1.02NA devices do not require the old password for a password change, which occurs in cleartext.

DCS-5000L v1.05 and DCS-932L v2.17 and older are affecged by Incorrect Acess Control. The use of the basic authentication for the devices command interface allows attack vectors that may compromise the cameras configuration and allow malicious users on the LAN to access the device. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

D-Link DIR-615 Wireless N 300 Router allows authentication bypass via a modified POST request to login.cgi. This issue occurs because it fails to validate the password field. Successful exploitation of this issue allows an attacker to take control of the affected device.

An issue was discovered on D-Link DCS-1130 and DCS-1100 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary loads at address 0x00012CF4 a flag called "Authenticate" that indicates whether a user should be authenticated or not before allowing access to the video feed. By default, the value for this flag is zero and can be set/unset using the HTTP interface and network settings tab as shown below. The device requires that a user logging to the HTTP management interface of the device to provide a valid username and password. However, the device does not enforce the same restriction by default on RTSP URL due to the checkbox unchecked by default, thereby allowing any attacker in possession of external IP address of the camera to view the live video feed. The severity of this attack is enlarged by the fact that there more than 100,000 D-Link devices out there.

D-Link DIR845L A1 contains a authentication vulnerability via an AUTHORIZED_GROUP=1 value, as demonstrated by a request for getcfg.php.

On the D-Link DIR-615 before v20.12PTb04, once authenticated, this device identifies the user based on the IP address of his machine. By spoofing the IP address belonging to the victim's host, an attacker might be able to take over the administrative session without being prompted for authentication credentials. An attacker can get the victim's and router's IP addresses by simply sniffing the network traffic. Moreover, if the victim has web access enabled on his router and is accessing the web interface from a different network that is behind the NAT/Proxy, an attacker can sniff the network traffic to know the public IP address of the victim's router and take over his session as he won't be prompted for credentials.

An issue was discovered on D-Link DSL-2640B B2 EU_4.01B devices. Authentication can be bypassed when accessing cgi modules. This allows one to perform administrative tasks (e.g., modify the admin password) with no authentication.

The Clientless SSL VPN portal customization framework in Cisco ASA Software 8.2 before 8.2(5.51), 8.3 before 8.3(2.42), 8.4 before 8.4(7.23), 8.6 before 8.6(1.14), 9.0 before 9.0(4.24), 9.1 before 9.1(5.12), and 9.2 before 9.2(2.4) does not properly implement authentication, which allows remote attackers to modify RAMFS customization objects via unspecified vectors, as demonstrated by inserting XSS sequences or capturing credentials, aka Bug ID CSCup36829.

Session fixation vulnerability in the Workplace (aka WP) component in IBM FileNet P8 Application Engine (P8AE) 4.0.2.x before 4.0.2.7-P8AE-FP007 allows remote attackers to hijack web sessions via unspecified vectors.

The Identity Server in Novell Access Manager before 3.1 SP1 allows attackers with disabled Active Directory accounts to authenticate using X.509 authentication, which bypasses intended access restrictions.

DBHcms v1.2.0 has an unauthorized operation vulnerability because there's no access control at line 175 of dbhcms\page.php for empty cache operation. This vulnerability can be exploited to empty a table.

The AT&T U-verse 9.2.2h0d83 firmware for the Arris NVG589 and NVG599 devices, when IP Passthrough mode is not used, configures an unauthenticated proxy service on WAN TCP port 49152, which allows remote attackers to establish arbitrary TCP connections to intranet hosts by sending \x2a\xce\x01 followed by other predictable values.

Google Chrome before 52.0.2743.82 mishandles origin information during proxy authentication, which allows man-in-the-middle attackers to spoof a proxy-authentication login prompt or trigger incorrect credential storage by modifying the client-server data stream.

A lack of password change protection vulnerability in a depreciated API of McAfee Enterprise ePolicy Orchestrator (ePO) prior to 5.10 Update 13 allows a remote attacker to change the password of a compromised session without knowing the existing user's password. This functionality was removed from the User Interface in ePO 10 and the API has now been disabled. Other protection is in place to reduce the likelihood of this being successful through sending a link to a logged in user.

Improper Authentication vulnerability in the mobile monitoring feature of ICONICS GENESIS64 versions 10.97 to 10.97.2, Mitsubishi Electric GENESIS64 versions 10.97 to 10.97.2 and Mitsubishi Electric MC Works64 all versions allows a remote unauthenticated attacker to bypass proper authentication and log in to the system when all of the following conditions are met: * Active Directory is used in the security setting. * “Automatic log in” option is enabled in the security setting. * The IcoAnyGlass IIS Application Pool is running under an Active Directory Domain Account. * The IcoAnyGlass IIS Application Pool account is included in GENESIS64TM and MC Works64 Security and has permission to log in.

Dell PowerScale OneFS, versions 8.2.2-9.3.0.x, contain an authentication bypass by primary weakness in one of the authentication factors. A remote unauthenticated attacker may potentially exploit this vulnerability and bypass one of the factors of authentication.

The LDAP implementation in HiveServer2 in Apache Hive before 1.0.1 and 1.1.x before 1.1.1, as used in IBM InfoSphere BigInsights 3.0, 3.0.0.1, and 3.0.0.2 and other products, mishandles simple unauthenticated and anonymous bind configurations, which allows remote attackers to bypass authentication via a crafted LDAP request.

The connect method in lib/net/http.rb in the (1) Net::HTTP and (2) Net::HTTPS libraries in Ruby 1.8.5 and 1.8.6 does not verify that the commonName (CN) field in a server certificate matches the domain name in an HTTPS request, which makes it easier for remote attackers to intercept SSL transmissions via a man-in-the-middle attack or spoofed web site.

Hozard alarm system (Alarmsysteem) v1.0 is vulnerable to Improper Authentication. Commands sent via the SMS functionality are accepted from random phone numbers, which allows an attacker to bring the alarm system to a disarmed state from any given phone number.

The tabbed browsing feature in Apple Safari 3 before Beta Update 3.0.4 on Windows, and Mac OS X 10.4 through 10.4.10, allows remote attackers to spoof HTTP authentication for other sites and possibly conduct phishing attacks by causing an authentication sheet to be displayed for a tab that is not active, which makes it appear as if it is associated with the active tab.

Unspecified vulnerability in Default.aspx in Podium CMS allows remote attackers to have an unknown impact, possibly session fixation, via a META HTTP-EQUIV Set-cookie expression in the id parameter, related to "cookie manipulation." NOTE: this issue might be cross-site scripting (XSS).

A logic issue was addressed with improved state management. This issue is fixed in iOS 14.7, tvOS 14.7, watchOS 7.6. A malicious attacker with arbitrary read and write capability may be able to bypass Pointer Authentication.

Devices supporting Bluetooth before 5.1 may allow man-in-the-middle attacks, aka BLURtooth. Cross Transport Key Derivation in Bluetooth Core Specification v4.2 and v5.0 may permit an unauthenticated user to establish a bonding with one transport, either LE or BR/EDR, and replace a bonding already established on the opposing transport, BR/EDR or LE, potentially overwriting an authenticated key with an unauthenticated key, or a key with greater entropy with one with less.

The Disaster Recovery (DRA) feature on the Cisco ISB8320-E High-Definition IP-Only DVR allows remote attackers to bypass authentication by establishing a TELNET session during a recovery boot, aka Bug ID CSCup85422.

Microsoft Windows 2000 SP4 does not properly validate an RPC server during mutual authentication over SSL, which allows remote attackers to spoof an RPC server, aka the "RPC Mutual Authentication Vulnerability."

The Phone Proxy component in Cisco Adaptive Security Appliance (ASA) Software 9.1(.3) and earlier allows remote attackers to bypass authentication and change trust relationships by injecting a Certificate Trust List (CTL) file, aka Bug ID CSCuj66770.