Advantech Spectre RT ERT351 Versions 5.1.3 and prior has insufficient login authentication parameters required for the web application may allow an attacker to gain full access using a brute-force password attack.

Improper Restriction of Excessive Authentication Attempts vulnerability in upKeeper Solutions product upKeeper Manager allows Authentication Abuse.This issue affects upKeeper Manager: through 5.1.9.

kodbox 1.46.01 has a security flaw that enables user enumeration. This problem is present on the login page, where an attacker can identify valid users based on varying response messages, potentially paving the way for a brute force attack.

An issue was discovered on V-Zug Combi-Steam MSLQ devices before Ethernet R07 and before WLAN R05. There is no bruteforce protection (e.g., lockout) established. An attacker might be able to bruteforce the password to authenticate on the device.

A vulnerability in Kaiten version 57.131.12 and earlier allows attackers to bypass the PIN code authentication mechanism. The application requires users to input a 6-digit PIN code sent to their email for authorization after entering their login credentials. However, the request limiting mechanism can be easily bypassed, enabling attackers to perform a brute force attack to guess the correct PIN and gain unauthorized access to the application.

An issue was discovered on Weidmueller IE-SW-VL05M 3.6.6 Build 16102415, IE-SW-VL08MT 3.5.2 Build 16102415, and IE-SW-PL10M 3.3.16 Build 16102416 devices. The Authentication mechanism has no brute-force prevention.

Improper Restriction of Excessive Authentication Attempts in GitHub repository mastodon/mastodon prior to 4.0.0.

The Telenav Scout GPS Link app 1.x for iOS, as used with Toyota and Lexus vehicles, has an incorrect protection mechanism against brute-force attacks on the authentication process, which makes it easier for attackers to obtain multimedia-screen access via port 7050 on the cellular network, as demonstrated by a DrivingRestriction method call to uma/jsonrpc/mobile.

Some Xerox printers (such as the Phaser 3320 V53.006.16.000) did not implement account lockout. Local account credentials may be extracted from the device via brute force guessing attacks.

JumpServer is an open source bastion host. When users enable MFA and use a public key for authentication, the Koko SSH server does not verify the corresponding SSH private key. An attacker could exploit a vulnerability by utilizing a disclosed public key to attempt brute-force authentication against the SSH service This issue has been patched in versions 3.6.5 and 3.5.6. Users are advised to upgrade. There are no known workarounds for this issue.

Ricoh SP C250DN 1.05 devices have an Authentication Method Vulnerable to Brute Force Attacks. Some Ricoh printers did not implement account lockout. Therefore, it was possible to obtain the local account credentials by brute force.

The cookie session ID is of insufficient length and can be exploited by brute force, which may allow a remote attacker to obtain a valid session, bypass authentication, and manipulate the transmitter.

AutoPi Wi-Fi/NB and 4G/LTE devices before 2019-10-15 allows an attacker to perform a brute-force attack or dictionary attack to gain access to the WiFi network, which provides root access to the device. The default WiFi password and WiFi SSID are derived from the same hash function output (input is only 8 characters), which allows an attacker to deduce the WiFi password from the WiFi SSID.

OpenCart CMS v4.0.2.2 was discovered to lack a protective mechanism on its login page against excessive login attempts, allowing unauthenticated attackers to gain access to the application via a brute force attack to the password parameter.

There is no limit on the number of login attempts in the web server for the SNAP PAC S1 Firmware version R10.3b. This could allow for a brute-force attack on the built-in web server login.

Chunghwa Telecom NOKIA G-040W-Q has a vulnerability of insufficient measures to prevent multiple failed authentication attempts. An unauthenticated remote attacker can execute a crafted Javascript to expose captcha in page, making it very easy for bots to bypass the captcha check and more susceptible to brute force attacks.

An unauthorized user could gain account access to IQ Wifi 6 versions prior to 2.0.2 by conducting a brute force authentication attack.

A security feature bypass vulnerability exists in Active Directory Federation Services (ADFS) which could allow an attacker to bypass the extranet lockout policy.To exploit this vulnerability, an attacker could run a specially crafted application, which would allow an attacker to launch a password brute-force attack or cause account lockouts in Active Directory.This security update corrects how ADFS handles external authentication requests., aka 'ADFS Security Feature Bypass Vulnerability'. This CVE ID is unique from CVE-2019-0975.

The number of login attempts is not limited. This could allow an attacker to perform a brute force on HTTP basic authentication.

SpliceCom Maximiser Soft PBX v1.5 and before does not restrict excessive authentication attempts, allowing attackers to bypass authentication via a brute force attack.

Improper Restriction of Excessive Authentication Attempts in GitHub repository froxlor/froxlor prior to 2.0.20.

user_oidc app is an OpenID Connect user backend for Nextcloud. Authentication can be broken/bypassed in user_oidc app. It is recommended that the Nextcloud user_oidc app is upgraded to 1.3.2

D-Link DSL-224 firmware version 3.0.10 CWE-307: Improper Restriction of Excessive Authentication Attempts

Beck IPC GmbH IPC@CHIP telnet service does not delay or disconnect users from the service when bad passwords are entered, which makes it easier for remote attackers to conduct brute force password guessing attacks.

Compaq/Microcom 6000 Access Integrator does not disconnect a client after a certain number of failed login attempts, which allows remote attackers to guess usernames or passwords via a brute force attack.

VMware Workspace ONE Access and Identity Manager, unintentionally provide a login interface on port 7443. A malicious actor with network access to port 7443 may attempt user enumeration or brute force the login endpoint, which may or may not be practical based on lockout policy configuration and password complexity for the target account.

The code that performs password matching when using 'Basic' HTTP authentication does not use a constant-time memcmp and has no rate-limiting. This means that an unauthenticated network attacker can brute-force the HTTP basic password, byte-by-byte, by recording the webserver's response time until the unauthorized (401) response.

Improper Restriction of Excessive Authentication Attempts in GitHub repository linagora/twake prior to 2023.Q1.1223.

BlackVue DR750-2CH LTE v.1.012_2022.10.26 was discovered to contain a weak default passphrase which can be easily cracked via a brute force attack if the WPA2 handshake is intercepted.

A client side rate limit issue discovered in Connectize AC21000 G6 641.139.1.1256 allows attackers to gain escalated privileges via brute force style attacks.

An issue was discovered in /cgi-bin/luci on Teltonika RTU9XX (e.g., RUT950) R_31.04.89 before R_00.05.00.5 devices. The authentication functionality is not protected from automated tools used to make login attempts to the application. An anonymous attacker has the ability to make unlimited login attempts with an automated tool. This ability could lead to cracking a targeted user's password.

index.php?r=site%2Flogin in EduSec through 4.2.6 does not restrict sending a series of LoginForm[username] and LoginForm[password] parameters, which might make it easier for remote attackers to obtain access via a brute-force approach.

Server-Side Request Forgery (SSRF), Improperly Controlled Modification of Dynamically-Determined Object Attributes, Improper Restriction of Excessive Authentication Attempts vulnerability in YugaByte, Inc. Yugabyte Managed allows Accessing Functionality Not Properly Constrained by ACLs, Communication Channel Manipulation, Authentication Abuse.This issue affects Yugabyte Managed: from 2.0.0.0 through 2.13.0.0

onefilecms.php in OneFileCMS through 2012-04-14 might allow attackers to conduct brute-force attacks via the onefilecms_username and onefilecms_password fields.

IBM BigFix Platform 9.2 and 9.5 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 140756.

An issue was discovered in app/Controller/UsersController.php in MISP 2.4.92. An adversary can bypass the brute-force protection by using a PUT HTTP method instead of a POST HTTP method in the login part, because this protection was only covering POST requests.

IBM Security Guardium Big Data Intelligence (SonarG) 3.1 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 137773.

The DIGITS: WordPress Mobile Number Signup and Login WordPress plugin before 8.4.6.1 does not rate limit OTP validation attempts, making it straightforward for attackers to bruteforce them.

Agentflow from Flowring Technology has an Account Lockout Bypass vulnerability, allowing unauthenticated remote attackers to exploit this vulnerability to perform password brute force attack.

An issue in GX Group GPON ONT Titanium 2122A T2122-V1.26EXL allows attackers to escalate privileges via a brute force attack at the login page.

GL-iNet products AR750/AR750S/AR300M/AR300M16/MT300N-V2/B1300/MT1300/SFT1200/X750 v4.3.11, MT3000/MT2500/AXT1800/AX1800/A1300/X300B v4.5.16, XE300 v4.3.16, E750 v4.3.12, AP1300/S1300 v4.3.13, and XE3000/X3000 v4.4 were discovered to contain a remote code execution (RCE) vulnerability.

BookWyrm is a social network for tracking reading. Versions prior to 0.4.5 were found to lack rate limiting on authentication views which allows brute-force attacks. This issue has been patched in version 0.4.5. Admins with existing instances will need to update their `nginx.conf` file that was created when the instance was set up. Users are advised advised to upgrade. Users unable to upgrade may update their nginx.conf files with the changes manually.

An improper restriction of excessive authentication attempts vulnerability [CWE-307] in FortiTester Telnet port 2.3.0 through 3.9.1, 4.0.0 through 4.2.0, 7.0.0 through 7.1.0 may allow an unauthenticated attacker to guess the credentials of an admin user via a brute force attack.

Pimcore before 6.2.2 lacks brute force protection for the 2FA token.

Zammad 5.2.0 is vulnerable to privilege escalation. Zammad has a prevention against brute-force attacks trying to guess login credentials. After a configurable amount of attempts, users are invalidated and logins prevented. An attacker might work around this prevention, enabling them to send more than the configured amount of requests before the user invalidation takes place.

Dell RecoverPoint for Virtual Machines 6.0.x contains a vulnerability. An improper Restriction of Excessive Authentication vulnerability where a Network attacker could potentially exploit this vulnerability, leading to a brute force attack or a dictionary attack against the RecoverPoint login form and a complete system compromise. This allows attackers to brute-force the password of valid users in an automated manner.

bl-kernel/security.class.php in Bludit 3.9.2 allows attackers to bypass a brute-force protection mechanism by using many different forged X-Forwarded-For or Client-IP HTTP headers.

WiJungle NGFW Version U250 was discovered to be vulnerable to No Rate Limit attack, allowing the attacker to brute force the admin password leading to Account Take Over.

DECISO OPNsense 23.1 does not impose rate limits for authentication, allowing attackers to perform a brute-force attack to bypass authentication.

Dell EMC PowerStore, contain(s) an Improper Restriction of Excessive Authentication Attempts Vulnerability in PowerStore Manager GUI. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to password brute-forcing. Account takeover is possible if weak passwords are used by users.