Cisco Adaptive Security Appliances (ASA) devices with firmware 8.4 do not properly validate unspecified input related to UNC share pathnames, which allows remote authenticated users to cause a denial of service (device crash) via unknown vectors, aka Bug ID CSCuc65775.

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software and Cisco IOS XE Software on Catalyst 4500 Series Switches could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient input validation when the software processes specific SNMP object identifiers. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: To exploit this vulnerability by using SNMPv2c or earlier, the attacker must know the SNMP read-only community string for an affected system. To exploit this vulnerability by using SNMPv3, the attacker must know the user credentials for the affected system.

The web framework in Cisco Transport Gateway for Smart Call Home (aka TG-SCH or Transport Gateway Installation Software) does not validate an unspecified parameter, which allows remote authenticated users to cause a denial of service (service crash) via a crafted string, aka Bug ID CSCuq31819.

The L2TP module in Cisco IOS XE 3.10S(.2) and earlier on ASR 1000 routers allows remote authenticated users to cause a denial of service (ESP card reload) via a malformed L2TP packet, aka Bug ID CSCun09973.

The XML parser in the Cisco Jabber IM application for Android allows remote authenticated users to cause a denial of service (blocked connection) by leveraging an entry on a Buddy list and sending a crafted XMPP presence update message, aka Bug ID CSCue38383.

Cisco IOS 15.1 and 15.2 and IOS XE 3.x, when configured as an IPsec hub with X.509 certificates in use, allows remote authenticated users to cause a denial of service (segmentation fault and device crash) via unspecified vectors, aka Bug ID CSCtq61128.

The Proxy Bypass Content Rewriter feature in the WebVPN subsystem in Cisco Adaptive Security Appliance (ASA) Software 9.1(.2) and earlier allows remote authenticated users to cause a denial of service (device crash or error-recovery event) via an HTTP request that triggers a rewrite, aka Bug ID CSCug91577.

The Media Snapshot implementation on Cisco TelePresence Multipoint Switch (CTMS) devices allows remote authenticated users to cause a denial of service (device reload) by sending many Media Snapshot requests at the time of a meeting termination, aka Bug ID CSCuh44796.

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE 3.16 could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a race condition that could occur when the affected software processes an SNMP read request that contains certain criteria for a specific object ID (OID) and an active crypto session is disconnected on an affected device. An attacker who can authenticate to an affected device could trigger this vulnerability by issuing an SNMP request for a specific OID on the device. A successful exploit will cause the device to restart due to an attempt to access an invalid memory region. The attacker does not control how or when crypto sessions are disconnected on the device. Cisco Bug IDs: CSCvb94392.

screens/base/web_auth_custom.html on Cisco Wireless LAN Controller (WLC) devices with software 7.2.110.0 allows remote authenticated users to cause a denial of service (device reload) via a certain buttonClicked value in an internal webauth_type request, aka Bug ID CSCud50209.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. This vulnerability is due to improper control of a resource. An attacker with the ability to spoof a trusted IKEv2 site-to-site VPN peer and in possession of valid IKEv2 credentials for that peer could exploit this vulnerability by sending malformed, authenticated IKEv2 messages to an affected device. A successful exploit could allow the attacker to trigger a reload of the device.

Cisco IOS 15.0 through 15.3 allows remote authenticated users to cause a denial of service (device crash) via an MVPNv6 update, aka Bug ID CSCty89224.

Cisco IOS 15.0 and 15.1 on Catalyst 3560 and 3750 series switches allows remote authenticated users to cause a denial of service (device reload) by completing local web authentication quickly, aka Bug ID CSCts88664.

The Web Administrator Interface on Cisco Wireless LAN Controller (WLC) devices allows remote authenticated users to cause a denial of service (device crash) by leveraging membership in the Full Manager managers group, Read Only managers group, or Lobby Ambassador managers group, and sending a request that (1) lacks a parameter value or (2) contains a malformed parameter value, aka Bug IDs CSCuh14313, CSCuh14159, CSCuh14368, and CSCuh14436.

The IKEv2 client and initiator implementations in Cisco IOS 15.5(3)M and IOS XE allow remote IKEv2 servers to cause a denial of service (device reload) via crafted IKEv2 packets, aka Bug ID CSCux97540.

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software running on certain models of Cisco Catalyst Switches could allow an authenticated, remote attacker to cause a denial of service (DoS) condition, aka a GET MIB Object ID Denial of Service Vulnerability. The vulnerability is due to a condition that could occur when the affected software processes an SNMP read request that contains a request for the ciscoFlashMIB object ID (OID). An attacker could trigger this vulnerability by issuing an SNMP GET request for the ciscoFlashMIB OID on an affected device. A successful exploit could cause the affected device to restart due to a SYS-3-CPUHOG. This vulnerability affects the following Cisco devices if they are running a vulnerable release of Cisco IOS Software and are configured to use SNMP Version 2 (SNMPv2) or SNMP Version 3 (SNMPv3): Cisco Catalyst 2960-L Series Switches, Cisco Catalyst Digital Building Series Switches 8P, Cisco Catalyst Digital Building Series Switches 8U. Cisco Bug IDs: CSCvd89541.

A vulnerability in Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper management of memory resources, referred to as a double free. An attacker could exploit this vulnerability by sending crafted SNMP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. To exploit this vulnerability via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for an affected system. To exploit this vulnerability via SNMP Version 3, the attacker must know the user credentials for the affected system. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, have been configured to be queried over SNMP, and have Network Address Translation (NAT) enabled. Cisco Bug IDs: CSCve75818.

The RADIUS client implementation in Cisco IOS 15.4(3)M2.2, when a shared RADIUS secret is configured, allows remote RADIUS servers to cause a denial of service (device reload) via malformed answers, aka Bug ID CSCuu59324.

The IKE implementation in the WS-IPSEC-3 service module in Cisco IOS 12.2 on Catalyst 6500 devices allows remote authenticated users to cause a denial of service (device reload) by sending a crafted message during IPsec tunnel setup, aka Bug ID CSCur70505.

The SNMP implementation in Cisco IOS 15.1(2)SG4 on Catalyst 4500 devices, when single-switch Virtual Switching System (VSS) is configured, allows remote authenticated users to cause a denial of service (device crash) by performing SNMP polling, aka Bug ID CSCuq04574.

The SNMP implementation in Cisco NX-OS 6.1(2)I2(3) on Nexus 9000 devices, when a Reset High Availability (HA) policy is configured, allows remote authenticated users to cause a denial of service (device reload) via unspecified vectors, aka Bug ID CSCuq92240.

Cisco Adaptive Security Appliance (ASA) Software 9.1(.5) and earlier allows remote authenticated users to cause a denial of service (device reload) via crafted attributes in a RADIUS packet, aka Bug ID CSCun69561.

A vulnerability in the IPv6 Simple Network Management Protocol (SNMP) code of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause high CPU usage or a reload of the device. The vulnerability is due to IPv6 sub block corruption. An attacker could exploit this vulnerability by polling the affected device IPv6 information. An exploit could allow the attacker to trigger high CPU usage or a reload of the device. Known Affected Releases: Denali-16.3.1. Cisco Bug IDs: CSCvb14640.

Cisco IOS XE 3.8S(.2) and earlier does not properly use a DHCP pool during assignment of an IP address, which allows remote authenticated users to cause a denial of service (device reload) via an AAA packet that triggers an address requirement, aka Bug ID CSCuh04949.

The ISM module in Cisco IOS on ISR G2 routers does not properly handle authentication-header packets, which allows remote authenticated users to cause a denial of service (module reload) via a series of malformed packets, aka Bug ID CSCub92025.

The IOS FTP Server in Cisco IOS 11.3 through 12.4 allows remote authenticated users to cause a denial of service (IOS reload) via unspecified vectors involving transferring files (aka bug ID CSCse29244).

Cisco IOS before 15.1(2)SY allows remote authenticated users to cause a denial of service (device crash) by establishing an SSH session from a client and then placing this client into a (1) slow or (2) idle state, aka Bug ID CSCto87436.

The FlexVPN implementation in Cisco IOS 15.2 and 15.3 allows remote authenticated users to cause a denial of service (spoke crash) via spoke-to-spoke traffic, aka Bug ID CSCtz02622.

Cisco Adaptive Security Appliance (ASA) Software, when certain same-security-traffic and management-access options are enabled, allows remote authenticated users to cause a denial of service (stack overflow and device reload) by using the clientless SSL VPN portal for internal-resource browsing, aka Bug ID CSCui51199.

Cisco Adaptive Security Appliances (ASA) devices with firmware 8.x through 8.4(1) do not properly manage SSH sessions, which allows remote authenticated users to cause a denial of service (device crash) by establishing multiple sessions, aka Bug ID CSCtc59462.

The OSPF functionality in Cisco IOS and IOS XE allows remote attackers to cause a denial of service (device reload) via crafted options in an LSA type 11 packet, aka Bug ID CSCui21030.

The NTP implementation in Cisco IOS 12.0 through 12.4 and 15.0 through 15.1, and IOS XE 2.1 through 3.3, does not properly handle encapsulation of multicast NTP packets within MSDP SA messages, which allows remote attackers to cause a denial of service (device reload) by leveraging an MSDP peer relationship, aka Bug ID CSCuc81226.

The PPTP-ALG component in CRS Carrier Grade Services Engine (CGSE) and ASR 9000 Integrated Service Module (ISM) in Cisco IOS XR allows remote attackers to cause a denial of service (module reset) via crafted packet streams, aka Bug ID CSCue91963.

Cisco IOS XE 3.4 before 3.4.2S and 3.5 before 3.5.1S on 1000 ASR devices allows remote attackers to cause a denial of service (device reload) via malformed ICMP error packets associated with a (1) TCP or (2) UDP session that is under inspection by the Zone-Based Firewall (ZBFW) component, aka Bug ID CSCtt26470.

The T1/E1 driver-queue functionality in Cisco IOS 12.2 and 15.0 through 15.3, when an HDLC32 driver is used, allows remote attackers to cause a denial of service (interface queue wedge) via bursty network traffic, aka Bug ID CSCub67465.

The DNS-over-TCP implementation in Cisco IOS 12.2 and 15.0 through 15.3, when NAT is used, allows remote attackers to cause a denial of service (device reload) via a crafted IPv4 DNS TCP stream, aka Bug ID CSCuf28733.

The PPTP implementation in Cisco IOS 12.2 and 15.0 through 15.3, when NAT is used, allows remote attackers to cause a denial of service (device reload) via crafted TCP port-1723 packets, aka Bug ID CSCtq14817.

Buffer overflow in the web-application interface on Cisco 9900 IP phones allows remote attackers to cause a denial of service (webapp interface outage) via long values in unspecified fields, aka Bug ID CSCuh10343.

Apache Log4j2 versions 2.0-beta7 through 2.17.0 (excluding security fix releases 2.3.2 and 2.12.4) are vulnerable to a remote code execution (RCE) attack when a configuration uses a JDBC Appender with a JNDI LDAP data source URI when an attacker has control of the target LDAP server. This issue is fixed by limiting JNDI data source names to the java protocol in Log4j2 versions 2.17.1, 2.12.4, and 2.3.2.

A vulnerability in the batch provisioning feature in Cisco Prime Collaboration Provisioning Tool could allow an authenticated, remote attacker to overwrite system files as root. The vulnerability is due to lack of input validation of the parameters in BatchFileName and Directory. An attacker could exploit this vulnerability by manipulating the parameters of the batch action file function. Cisco Bug IDs: CSCvd61766.

A vulnerability in the web interface of the Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform command injection and elevate privileges to root. The attacker must authenticate with valid administrator credentials. Affected Products: Cisco AsyncOS Software 10.0 and later for WSA on both virtual and hardware appliances. More Information: CSCvd88862. Known Affected Releases: 10.1.0-204. Known Fixed Releases: 10.5.1-270 10.1.1-235.

A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685.

A vulnerability in the Telnet CLI command of Cisco NX-OS System Software 7.1 through 7.3 running on Cisco Nexus Series Switches could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into the Telnet CLI command. An exploit could allow the attacker to read or write arbitrary files at the user's privilege level outside of the user's path. Cisco Bug IDs: CSCvb86771.

A vulnerability in the UpgradeManager of the Cisco Prime Collaboration Provisioning Tool 12.1 could allow an authenticated, remote attacker to write arbitrary files as root on the system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by triggering the upgrade package installation functionality. Cisco Bug IDs: CSCvc90304.

A vulnerability in the web-based GUI of Cisco Integrated Management Controller (IMC) 3.0(1c) could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability exists because the affected software does not sufficiently sanitize user-supplied HTTP input. An attacker could exploit this vulnerability by sending an HTTP POST request that contains crafted, deserialized user data to the affected software. A successful exploit could allow the attacker to execute arbitrary commands with root-level privileges on the affected system, which the attacker could use to conduct further attacks. Cisco Bug IDs: CSCvd14591.

A vulnerability in the web proxy functionality of the Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to forward traffic from the web proxy interface of an affected device to the administrative management interface of an affected device, aka an Access Control Bypass Vulnerability. Affected Products: virtual and hardware versions of Cisco Web Security Appliance (WSA). More Information: CSCvd88863. Known Affected Releases: 10.1.0-204 9.0.0-485.

The image-upgrade functionality on Cisco 9900 Unified IP phones allows local users to gain privileges by placing shell commands in an unspecified parameter, aka Bug ID CSCuh10334.

A vulnerability in the file check operation of Cisco ASR 5000 Series Aggregated Services Routers running the Cisco StarOS operating system could allow an authenticated, remote attacker to overwrite or modify arbitrary files on an affected system. More Information: CSCvd73726. Known Affected Releases: 21.0.v0.65839 21.3.M0.67005. Known Fixed Releases: 21.4.A0.67087 21.4.A0.67079 21.4.A0.67013 21.3.M0.67084 21.3.M0.67077 21.3.M0.66994 21.3.J0.66993 21.1.v0.67082 21.1.V0.67083.

A vulnerability in the implementation of the H.264 protocol in Cisco Meeting Server (CMS) 2.1.4 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. The vulnerability exists because the affected application does not properly validate Fragmentation Unit (FU-A) protocol packets. An attacker could exploit this vulnerability by sending a crafted H.264 FU-A packet through the affected application. A successful exploit could allow the attacker to cause a DoS condition on the affected system due to an unexpected restart of the CMS media process on the system. Although the CMS platform continues to operate and only the single, affected CMS media process is restarted, a brief interruption of media traffic for certain users could occur. Cisco Bug IDs: CSCve10131.

A vulnerability in configuration modification permissions validation for Cisco Unified Communications Manager could allow an authenticated, remote attacker to perform a horizontal privilege escalation where one user can modify another user's configuration. The vulnerability is due to lack of proper Role Based Access Control (RBAC) when certain user configuration changes are requested. An attacker could exploit this vulnerability by sending an authenticated, crafted HTTP request to the targeted application. An exploit could allow the attacker to impact the integrity of the application where one user can modify the configuration of another user's information. Cisco Bug IDs: CSCve27331. Known Affected Releases: 10.5(2.10000.5), 11.0(1.10000.10), 11.5(1.10000.6).