PPTP implementation in Cisco IOS 12.1 and 12.2 allows remote attackers to cause a denial of service (crash) via a malformed packet.

Cisco IOS 12.2 and earlier running Cisco Discovery Protocol (CDP) allows remote attackers to cause a denial of service (memory consumption) via a flood of CDP neighbor announcements.

Cisco routers and switches running IOS 12.0 through 12.2.1 allows a remote attacker to cause a denial of service via a flood of UDP packets.

Memory leak in Cisco IOS before 15.1(1)SY, when IKEv2 debugging is enabled, allows remote attackers to cause a denial of service (memory consumption) via crafted packets, aka Bug ID CSCtn22376.

Web-based configuration utility in Cisco 600 series routers running CBOS 2.0.1 through 2.4.2ap binds itself to port 80 even when web-based configuration services are disabled, which could leave the router open to attack.

Cisco 600 series routers running CBOS 2.0.1 through 2.4.2ap allows remote attackers to cause a denial of service via multiple connections to the router on the (1) HTTP or (2) telnet service, which causes the router to become unresponsive and stop forwarding packets.

CBOS 2.4.1 and earlier in Cisco 600 routers allows remote attackers to cause a denial of service via a slow stream of TCP SYN packets.

Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not handle the "fragment" keyword in a compiled ACL (Turbo ACL) for packets that are sent to the router, which allows remote attackers to cause a denial of service via a flood of fragments.

Cisco 600 routers running CBOS 2.4.1 and earlier allow remote attackers to cause a denial of service via a large ICMP echo (ping) packet.

Cisco Catalyst 5000 series switches 6.1(2) and earlier will forward an 802.1x frame on a Spanning Tree Protocol (STP) blocked port, which causes a network storm and a denial of service.

Cisco 12000 with IOS 12.0 and line cards based on Engine 2 and earlier allows remote attackers to cause a denial of service (CPU consumption) by flooding the router with traffic that generates a large number of ICMP Unreachable replies.

Multiple Cisco networking products allow remote attackers to cause a denial of service on the local network via a series of ARP packets sent to the router's interface that contains a different MAC address for the router, which eventually causes the router to overwrite the MAC address in its ARP table.

Cisco Catalyst 2900XL switch allows a remote attacker to create a denial of service via an empty UDP packet sent to port 161 (SNMP) when SNMP is disabled.

Cisco Catalyst 6000, 5000, or 4000 switches allow remote attackers to cause a denial of service by connecting to the SSH service with a non-SSH client, which generates a protocol mismatch error.

Cisco IOS 11.x and 12.0 with ATM support allows attackers to cause a denial of service via the undocumented Interim Local Management Interface (ILMI) SNMP community string.

Cisco PIX Firewall 515 and 520 with 5.1.4 OS running aaa authentication to a TACACS+ server allows remote attackers to cause a denial of service via a large number of authentication requests.

Cisco SN 5420 Storage Router 1.1(3) and earlier allows remote attackers to cause a denial of service (reboot) via a series of connections to TCP port 8023.

Cisco CBOS 2.3.8 and earlier allows remote attackers to cause a denial of service via an ICMP ECHO REQUEST (ping) with the IP Record Route option set.

The Fabric Interconnect component in Cisco Unified Computing System (UCS) 2.0 allows remote attackers to cause a denial of service (process crash) via an attempted SSH session, aka Bug ID CSCtt94543.

Cisco devices IOS 12.0 and earlier allow a remote attacker to cause a crash, or bad route updates, via malformed BGP updates with unrecognized transitive attribute.

The Web interface to Cisco 600 routers running CBOS 2.4.1 and earlier allow remote attackers to cause a denial of service via a URL that does not end in a space character.

Cisco Data Center Network Manager is affected by Excessive Logging During a TCP Flood on Java Ports. If the size of server.log becomes very big because of too much logging by the DCNM server, then the CPU utilization increases. Known Affected Releases: 5.2(1). Known Fixed Releases: 6.0(0)SL1(0.14) 5.2(2.73)S0. Product identification: CSCtt15295.

Buffer overflow in Cisco TACACS+ tac_plus server allows remote attackers to cause a denial of service via a malformed packet with a long length field.

Cisco Catalyst LAN switches running Catalyst 5000 supervisor software allows remote attackers to perform a denial of service by forcing the supervisor module to reload.

Denial of service in Cisco IOS web server allows attackers to reboot the router using a long URL.

Cisco IOS 15.2S allows remote attackers to cause a denial of service (interface queue wedge) via malformed UDP traffic on port 465, aka Bug ID CSCts48300.

Buffer overflow in Cisco 7xx routers through the telnet service.

Vulnerability in Cisco 7xx series routers allows a remote attacker to cause a system reload via a TCP connection to the router's TELNET port.

Denial of service in Cisco routers running NAT via a PORT command from an FTP client to a Telnet port.

Attackers can crash a Cisco IOS router or device, provided they can get to an interactive prompt (such as a login). This applies to some IOS 9.x, 10.x, and 11.x releases.

Cisco IOS 12.0 and other versions can be crashed by malicious UDP packets to the syslog port.

The sccp-protocol component in Cisco IP Communicator (CIPC) 7.0 through 8.6 does not limit the rate of SCCP messages to Cisco Unified Communications Manager (CUCM), which allows remote attackers to cause a denial of service via vectors that trigger (1) on hook and (2) off hook messages, as demonstrated by a Plantronics headset, aka Bug ID CSCti40315.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an NX-API system process to unexpectedly restart. The vulnerability is due to incorrect validation of the HTTP header of a request that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP request to the NX-API on an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition in the NX-API service; however, the NX-OS device itself would still be available and passing network traffic. Note: The NX-API feature is disabled by default.

A vulnerability in the implementation of the Short Message Service (SMS) handling functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to improper processing of SMS protocol data units (PDUs) that are encoded with a special character set. An attacker could exploit this vulnerability by sending a malicious SMS message to an affected device. A successful exploit could allow the attacker to cause the wireless WAN (WWAN) cellular interface module on an affected device to crash, resulting in a DoS condition that would require manual intervention to restore normal operating conditions.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit this vulnerability by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to reload the device and causing a DoS condition.

A vulnerability in the web-based management interface of Cisco RV110W, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to disconnect clients that are connected to the guest network on an affected router. The vulnerability is due to improper authorization of an HTTP request. An attacker could exploit this vulnerability by accessing the URL for device disconnection and providing the connected device information. A successful exploit could allow the attacker to deny service to specific clients that are connected to the guest network.

A vulnerability in the authentication service of the Cisco Unified Communications Manager IM and Presence (Unified CM IM&P) Service, Cisco TelePresence Video Communication Server (VCS), and Cisco Expressway Series could allow an unauthenticated, remote attacker to cause a service outage for users attempting to authenticate, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient controls for specific memory operations. An attacker could exploit this vulnerability by sending a malformed Extensible Messaging and Presence Protocol (XMPP) authentication request to an affected system. A successful exploit could allow the attacker to cause an unexpected restart of the authentication service, preventing users from successfully authenticating. Exploitation of this vulnerability does not impact users who were authenticated prior to an attack.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause the SNMP application to leak system memory, which could cause an affected device to restart unexpectedly. The vulnerability is due to improper error handling when processing inbound SNMP packets. An attacker could exploit this vulnerability by sending multiple crafted SNMP packets to an affected device. A successful exploit could allow the attacker to cause the SNMP application to leak system memory because of an improperly handled error condition during packet processing. Over time, this memory leak could cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.

A vulnerability in the interactions between the DHCP and TFTP features for Cisco Small Business 300 Series (Sx300) Managed Switches could allow an unauthenticated, remote attacker to cause the device to become low on system memory, which in turn could lead to an unexpected reload of the device and result in a denial of service (DoS) condition on an affected device. The vulnerability is due to a failure to free system memory when an unexpected DHCP request is received. An attacker could exploit this vulnerability by sending a crafted DHCP packet to the targeted device. A successful exploit could allow the attacker to cause an unexpected reload of the device.

A vulnerability in the Session Initiation Protocol (SIP) protocol implementation of Cisco Unified Communications Manager could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient validation of input SIP traffic. An attacker could exploit this vulnerability by sending a malformed SIP packet to an affected Cisco Unified Communications Manager. A successful exploit could allow the attacker to trigger a new registration process on all connected phones, temporarily disrupting service.

A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 8800 Series could allow an unauthenticated, remote attacker to cause high disk utilization, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software does not restrict the maximum size of certain files that can be written to disk. An attacker who has valid administrator credentials for an affected system could exploit this vulnerability by sending a crafted, remote connection request to an affected system. A successful exploit could allow the attacker to write a file that consumes most of the available disk space on the system, causing application functions to operate abnormally and leading to a DoS condition. This vulnerability affects Cisco IP Phone 8800 Series products running a SIP Software release prior to 12.5(1)SR1.

A vulnerability in the web proxy functionality of Cisco AsyncOS Software for Cisco Web Security Appliance could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper validation of HTTP and HTTPS requests. An attacker could exploit this vulnerability by sending a malformed HTTP or HTTPS request to an affected device. An exploit could allow the attacker to cause a restart of the web proxy process, resulting in a temporary DoS condition.

A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 8800 Series could allow an unauthenticated, remote attacker to bypass authorization, access critical services, and cause a denial of service (DoS) condition. The vulnerability exists because the software fails to sanitize URLs before it handles requests. An attacker could exploit this vulnerability by submitting a crafted URL. A successful exploit could allow the attacker to gain unauthorized access to critical services and cause a DoS condition. This vulnerability affects Cisco IP Phone 8800 Series products running a SIP Software release prior to 11.0(5) for Wireless IP Phone 8821 and 8821-EX; and 12.5(1)SR1 for the IP Conference Phone 8832 and the rest of the IP Phone 8800 Series. Cisco IP Conference Phone 8831 is not affected.

A vulnerability in the Secure Sockets Layer (SSL) input packet processor of Cisco Small Business 200, 300, and 500 Series Managed Switches could allow an unauthenticated, remote attacker to cause a memory corruption on an affected device. The vulnerability is due to improper validation of HTTPS packets. An attacker could exploit this vulnerability by sending a malformed HTTPS packet to the management web interface of the affected device. A successful exploit could allow the attacker to cause an unexpected reload of the device, resulting in a denial of service (DoS) condition.

A vulnerability in the Cisco Fabric Services component of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a buffer overflow, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow, resulting in process crashes and a DoS condition on the device. MDS 9000 Series Multilayer Switches are affected running software versions prior to 6.2(25), 8.1(1b), 8.3(1). Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected running software versions prior to 6.0(2)A8(10) and 7.0(3)I7(4). Nexus 3600 Platform Switches are affected running software versions prior to 7.0(3)F3(5) Nexus 7000 and 7700 Series Switches are affected running software versions prior to 6.2(22) and 8.2(3). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected running software versions prior to 7.0(3)F3(5). UCS 6200, 6300, and 6400 Fabric Interconnects are affected running software versions prior to 3.2(3j) and 4.0(2a).

A vulnerability in the detection engine of Cisco Firepower Threat Defense Software could allow an unauthenticated, remote attacker to cause the unexpected restart of the SNORT detection engine, resulting in a denial of service (DoS) condition. The vulnerability is due to the incomplete error handling of the SSL or TLS packet header during the connection establishment. An attacker could exploit this vulnerability by sending a crafted SSL or TLS packet during the connection handshake. An exploit could allow the attacker to cause the SNORT detection engine to unexpectedly restart, resulting in a partial DoS condition while the detection engine restarts. Versions prior to 6.2.3.4 are affected.

A vulnerability in the Event Management Service daemon (emsd) of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of gRPC requests. An attacker could exploit this vulnerability by repeatedly sending unauthenticated gRPC requests to the affected device. A successful exploit could cause the emsd process to crash, resulting in a DoS condition. Resolved in Cisco IOS XR 6.5.1 and later.

Multiple vulnerabilities in the Server Message Block (SMB) Protocol preprocessor detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent or remote attacker to cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the UDP protocol implementation for Cisco IoT Field Network Director (IoT-FND) could allow an unauthenticated, remote attacker to exhaust system resources, resulting in a denial of service (DoS) condition. The vulnerability is due to improper resource management for UDP ingress packets. An attacker could exploit this vulnerability by sending a high rate of UDP packets to an affected system within a short period of time. A successful exploit could allow the attacker to exhaust available system resources, resulting in a DoS condition.

A vulnerability in the Session Initiation Protocol (SIP) call processing of Cisco Meeting Server (CMS) software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition of the Cisco Meeting Server. The vulnerability is due to insufficient validation of Session Description Protocol (SDP) messages. An attacker could exploit this vulnerability by sending a crafted SDP message to the CMS call bridge. An exploit could allow the attacker to cause the CMS to reload, causing a DoS condition for all connected clients. Versions prior to 2.3.9 are affected.