A vulnerability in the antispam protection mechanisms of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass the URL reputation filters on an affected device. This vulnerability is due to improper processing of URLs. An attacker could exploit this vulnerability by crafting a URL in a particular way. A successful exploit could allow the attacker to bypass the URL reputation filters that are configured for an affected device, which could allow malicious URLs to pass through the device.

A vulnerability in the software-based SSL/TLS message handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message through an affected device. SSL/TLS messages sent to an affected device do not trigger this vulnerability. A successful exploit could allow the attacker to cause a process to crash. This crash would then trigger a reload of the device. No manual intervention is needed to recover the device after the reload.

A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device. To exploit this vulnerability, the attacker would need to have valid credentials on the device. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending one or more crafted IPC messages to the AnyConnect process on an affected device. A successful exploit could allow the attacker to stop the AnyConnect process, causing a DoS condition on the device. Note: The process under attack will automatically restart so no action is needed by the user or admin.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as the root user. The attacker must be authenticated on the affected device as a low-privileged user to exploit this vulnerability. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by injecting arbitrary commands to a file as a lower-privileged user. The commands are then executed on the device by the root user. A successful exploit could allow the attacker to execute arbitrary commands as the root user.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Jabber for Windows, Cisco Jabber for Mac, and Cisco Jabber for mobile platforms could allow an attacker to access sensitive information or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the affected device. Cisco has not released software updates that address this vulnerability.

A vulnerability in the vDaemon service of Cisco SD-WAN vManage Software could allow an authenticated, local attacker to cause a buffer overflow on an affected system, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete bounds checks for data that is provided to the vDaemon service of an affected system. An attacker could exploit this vulnerability by sending malicious data to the vDaemon listening service on the affected system. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected system, which could allow the attacker to cause the vDaemon listening service to reload and result in a DoS condition.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

A vulnerability in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient user input validation. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device using root-level privileges. Due to the nature of the vulnerability, only commands without parameters can be executed.

A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization checking and gain access to sensitive information on an affected system. This vulnerability is due to insufficient authorization checks. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to bypass authorization checking and gain access to sensitive information on the affected system.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to conduct a directory traversal attack and obtain read access to sensitive files on an affected system. The vulnerability is due to insufficient validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request that contains directory traversal character sequences to an affected system. A successful exploit could allow the attacker to write arbitrary files on the affected system.

A vulnerability in the vDaemon process of Cisco IOS XE SD-WAN Software could allow an unauthenticated, remote attacker to cause a device to reload, resulting a denial of service (DoS) condition. This vulnerability is due to insufficient handling of malformed packets. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

A vulnerability in the vDaemon process of Cisco SD-WAN Software could allow an unauthenticated, remote attacker to cause a device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient handling of malformed packets. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

Multiple vulnerabilities in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to cause the web UI software to become unresponsive and consume vty line instances, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient error handling in the web UI. An attacker could exploit these vulnerabilities by sending crafted HTTP packets to an affected device. A successful exploit could allow the attacker to cause the web UI software to become unresponsive and consume all available vty lines, preventing new session establishment and resulting in a DoS condition. Manual intervention would be required to regain web UI and vty session functionality. Note: These vulnerabilities do not affect the console connection.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow a remote attacker with network-operator privileges to conduct a cross-site scripting (XSS) attack or a reflected file download (RFD) attack against a user of the interface. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or allow an authenticated, local attacker to gain escalated privileges on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system, gain access to sensitive information, and view information that they are not authorized to access. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to cause the web UI software to become unresponsive and consume vty line instances, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient error handling in the web UI. An attacker could exploit these vulnerabilities by sending crafted HTTP packets to an affected device. A successful exploit could allow the attacker to cause the web UI software to become unresponsive and consume all available vty lines, preventing new session establishment and resulting in a DoS condition. Manual intervention would be required to regain web UI and vty session functionality. Note: These vulnerabilities do not affect the console connection.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system, gain access to sensitive information, and view information that they are not authorized to access. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

Multiple vulnerabilities in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system, gain access to sensitive information, and view information that they are not authorized to access. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow a remote attacker with network-operator privileges to conduct a cross-site scripting (XSS) attack or a reflected file download (RFD) attack against a user of the interface. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in exporting functions of the user interface for Cisco Prime Collaboration Assurance could allow an authenticated, remote attacker to view file directory listings and download files. Affected Products: Cisco Prime Collaboration Assurance software versions 11.0, 11.1, and 11.5 are vulnerable. Cisco Prime Collaboration Assurance software versions prior to 11.0 are not vulnerable. More Information: CSCvc86238. Known Affected Releases: 11.5(0).

A vulnerability in the CLI of Cisco StarOS operating system for Cisco ASR 5000 Series Routers could allow an authenticated, local attacker to elevate privileges on an affected device. The vulnerability is due to insufficient input validation of CLI commands. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user. To exploit this vulnerability, an attacker would need to have valid administrative credentials on an affected device.

A vulnerability in the Secure Sockets Layer (SSL) VPN feature of Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device or cause the device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because HTTP requests are not properly validated. An attacker could exploit this vulnerability by sending a crafted HTTP request over an SSL connection to an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device or cause the device to reload, resulting in a DoS condition.

A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client Software could allow an authenticated, local attacker to cause a targeted AnyConnect user to execute a malicious script. The vulnerability is due to a lack of authentication to the IPC listener. An attacker could exploit this vulnerability by sending crafted IPC messages to the AnyConnect client IPC listener. A successful exploit could allow an attacker to cause the targeted AnyConnect user to execute a script. This script would execute with the privileges of the targeted AnyConnect user. In order to successfully exploit this vulnerability, there must be an ongoing AnyConnect session by the targeted user at the time of the attack. To exploit this vulnerability, the attacker would also need valid user credentials on the system upon which the AnyConnect client is being run. Cisco has not released software updates that address this vulnerability.

A vulnerability in the CLI parser of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, local attacker to access files from the flash: filesystem. The vulnerability is due to insufficient application of restrictions during the execution of a specific command. An attacker could exploit this vulnerability by using a specific command at the command line. A successful exploit could allow the attacker to obtain read-only access to files that are located on the flash: filesystem that otherwise might not have been accessible.

A vulnerability in the web-based management interface of Cisco AsyncOS for Cisco Email Security Appliance (ESA), Cisco Web Security Appliance (WSA), and Cisco Content Security Management Appliance (SMA) could allow an unauthenticated remote attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of specific HTTP request headers. An attacker could exploit this vulnerability by sending a malformed HTTP request to an affected device. A successful exploit could allow the attacker to trigger a prolonged status of high CPU utilization relative to the GUI process(es). Upon successful exploitation of this vulnerability, an affected device will still be operative, but its response time and overall performance may be degraded.

A vulnerability in the management REST API of Cisco Industrial Network Director (IND) could allow an authenticated, remote attacker to cause the CPU utilization to increase to 100 percent, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of requests sent to the REST API. An attacker could exploit this vulnerability by sending a crafted request to the REST API. A successful exploit could allow the attacker to cause a permanent DoS condition that is due to high CPU utilization. Manual intervention may be required to recover the Cisco IND.

A vulnerability in the antispam protection mechanisms of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass the URL reputation filters on an affected device. The vulnerability is due to insufficient input validation of URLs. An attacker could exploit this vulnerability by crafting a URL in a particular way. A successful exploit could allow the attacker to bypass the URL reputation filters that are configured for the affected device, which could allow malicious URLs to pass through the device.

vulnerability within the Multimedia Viewer feature of Cisco Webex Meetings could allow an authenticated, remote attacker to bypass security protections. The vulnerability is due to missing security warning dialog boxes when a room host views shared multimedia files. An authenticated, remote attacker could exploit this vulnerability by using the host role to share files within the Multimedia sharing feature and convincing a former room host to view that file. A warning dialog normally appears cautioning users before the file is displayed; however, the former host would not see that warning dialog, and any shared multimedia would be rendered within the user's browser. The attacker could leverage this behavior to conduct additional attacks by including malicious files within a targeted room host's browser window.

A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to escalate their privileges to a user with root-level privileges. The vulnerability is due to insufficient validation of user-supplied content. This vulnerability could allow an attacker to load malicious software onto an affected device.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code with root privileges on the underlying Linux shell. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by first creating a malicious file on the affected device itself and then uploading a second malicious file to the device. A successful exploit could allow the attacker to execute arbitrary code with root privileges or bypass licensing requirements on the device.

A vulnerability in Cisco SD-WAN Solution Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain access to information that they are not authorized to access, make changes to the system that they are not authorized to make, and execute commands on an affected system with privileges of the root user.

A vulnerability in the packet filtering features of Cisco SD-WAN Software could allow an unauthenticated, remote attacker to bypass L3 and L4 traffic filters. The vulnerability is due to improper traffic filtering conditions on an affected device. An attacker could exploit this vulnerability by crafting a malicious TCP packet with specific characteristics and sending it to a targeted device. A successful exploit could allow the attacker to bypass the L3 and L4 traffic filters and inject an arbitrary packet into the network.

A vulnerability in the Cisco Discovery Protocol implementation for the Cisco IP Phone could allow an unauthenticated, adjacent attacker to remotely execute code with root privileges or cause a reload of an affected IP phone. The vulnerability is due to missing checks when processing Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to the targeted IP phone. A successful exploit could allow the attacker to remotely execute code with root privileges or cause a reload of an affected IP phone, resulting in a denial of service (DoS) condition. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).