A device takeover vulnerability exists in the Rockwell Automation Power Monitor 1000. This vulnerability allows configuration of a new Policyholder user without any authentication via API. Policyholder user is the most privileged user that can perform edit operations, creating admin users and performing factory reset.

Screen SFT DAB 600/C Firmware 1.9.3 contains a session management vulnerability that allows attackers to bypass authentication controls by exploiting IP address session binding. Attackers can reuse the same IP address and issue unauthorized requests to the userManager API to remove user accounts without proper authentication.

A vulnerability has been identified in TeleControl Server Basic V3.1 (All versions >= V3.1.2.2 < V3.1.2.3). The affected application contains an information disclosure vulnerability. This could allow an unauthenticated remote attacker to obtain password hashes of users and to login to and perform authenticated operations of the database service.

Memu Play 6.0.7 contains an insecure file permissions vulnerability that allows low-privilege users to escalate privileges by replacing the MemuService.exe executable. Attackers can rename and overwrite MemuService.exe in the installation directory with a malicious executable, which executes with system-level privileges when the service restarts after a computer reboot.

Seeyon OA A8 contains an unauthenticated arbitrary file write vulnerability in the /seeyon/htmlofficeservlet endpoint that allows remote attackers to write arbitrary files to the web application root by sending specially crafted POST requests with custom base64-encoded payloads. Attackers can write JSP webshells to the web root and execute them through the web server to achieve arbitrary OS command execution with web server privileges. Exploitation evidence was first observed by the Shadowserver Foundation on 2021-03-26 (UTC).

The MAVLink communication protocol does not require cryptographic authentication by default. When MAVLink 2.0 message signing is not enabled, any message -- including SERIAL_CONTROL, which provides interactive shell access -- can be sent by an unauthenticated party with access to the MAVLink interface. PX4 provides MAVLink 2.0 message signing as the cryptographic authentication mechanism for all MAVLink communication. When signing is enabled, unsigned messages are rejected at the protocol level.

The affected products are vulnerable to an unauthenticated API endpoint exposure, which may allow an attacker to remotely change the "forgot password" recovery email address.

A missing authentication for critical function vulnerability in KiloView Encoder Series could allow an unauthenticated attacker to create or delete administrator accounts. This vulnerability can grant the attacker full administrative control over the product.

Police Statistics Database System developed by Gotac has an Arbitrary File Upload vulnerability, allowing unauthenticated remote attacker to upload and execute web shell backdoors, thereby enabling arbitrary code execution on the server.

IAQS and I6 developed by JNC has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to directly operate system administrative functionalities.

MeetingHub developed by HAMASTAR Technology has an Arbitrary File Upload vulnerability, allowing unauthenticated remote attackers to upload and execute web shell backdoors, thereby enabling arbitrary code execution on the server.

Airleader Master versions 6.381 and prior allow for file uploads without restriction to multiple webpages running maximum privileges. This could allow an unauthenticated user to potentially obtain remote code execution on the server.

Avation Light Engine Pro exposes its configuration and control interface without any authentication or access control.

Certain models of Industrial Cellular Gateway developed by Planet Technology have a Missing Authentication vulnerability, allowing unauthenticated remote attackers to manipulate the device via a specific functionality.

WebITR developed by Uniong has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to log into the system as arbitrary users by exploiting a specific functionality.

TSA developed by Changing has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to read, modify, and delete database contents.

By default, the Packet Power Monitoring and Control Web Interface do not enforce authentication mechanisms. This vulnerability could allow unauthorized users to access and manipulate monitoring and control functions.

The affected products expose an unauthenticated Telnet-based command line interface that could allow an attacker to modify hardware configurations, manipulate data, or factory reset the device.

Synaccess netBooter NP-02x/NP-08x 6.8 contains an authentication bypass vulnerability in the webNewAcct.cgi script that allows unauthenticated attackers to create admin user accounts. Attackers can exploit the missing control check by sending crafted POST requests to create administrative accounts and gain unauthorized control over power supply management.

The Survision LPR Camera system does not enforce password protection by default. This allows access to the configuration wizard immediately without a login prompt or credentials check.

FLIR thermal traffic cameras contain an unauthenticated device manipulation vulnerability in their WebSocket implementation that allows attackers to bypass authentication and authorization controls. Attackers can directly modify device configurations, access system information, and potentially initiate denial of service by sending crafted WebSocket messages without authentication.

A remote code execution vulnerability exists within osCommerce Online Merchant version 2.3.4.1 due to insecure default configuration and missing authentication in the installer workflow. By default, the /install/ directory remains accessible after installation. An unauthenticated attacker can invoke install_4.php, submit crafted POST data, and inject arbitrary PHP code into the configure.php file. When the application later includes this file, the injected payload is executed, resulting in full server-side compromise.

The embedded web server on the thermostat listed version ranges contain a vulnerability that allows unauthenticated attackers, either on the local area network or from the Internet via a router with port forwarding set up, to gain direct access to the thermostat's embedded web server and reset user credentials by manipulating specific elements of the embedded web interface.

Better Auth is an authentication and authorization library for TypeScript. In versions prior to 1.3.26, unauthenticated attackers can create or modify API keys for any user by passing that user's id in the request body to the `api/auth/api-key/create` route. `session?.user ?? (authRequired ? null : { id: ctx.body.userId })`. When no session exists but `userId` is present in the request body, `authRequired` becomes false and the user object is set to the attacker-controlled ID. Server-only field validation only executes when `authRequired` is true (lines 280-295), allowing attackers to set privileged fields. No additional authentication occurs before the database operation, so the malicious payload is accepted. The same pattern exists in the update endpoint. This is a critical authentication bypass enabling full an unauthenticated attacker can generate an API key for any user and immediately gain complete authenticated access. This allows the attacker to perform any action as the victim user using the api key, potentially compromise the user data and the application depending on the victim's privileges. Version 1.3.26 contains a patch for the issue.

An authentication bypass vulnerability has been identified in certain DSL series routers, may allow remote attackers to gain unauthorized access into the affected system. Refer to the 'Security Update for DSL Series Router' section on the ASUS Security Advisory for more information.

The exos 9300 application can be used to configure Access Managers (e.g. 92xx, 9230 and 9290). The configuration is done in a graphical user interface on the dormakaba exos server. As soon as the save button is clicked in exos 9300, the whole configuration is sent to the selected Access Manager via SOAP. The SOAP request is sent without any prior authentication or authorization by default. Though authentication and authorization can be configured using IPsec for 92xx-K5 devices and mTLS for 92xx-K7 devices, it is not enabled by default and must therefore be activated with additional steps. This insecure default allows an attacker with network level access to completely control the whole environment. An attacker is for example easily able to conduct the following tasks without prior authentication: - Re-configure Access Managers (e.g. remove alarming system requirements) - Freely re-configure the inputs and outputs - Open all connected doors permanently - Open all doors for a defined time interval - Change the admin password - and many more Network level access can be gained due to an insufficient network segmentation as well as missing LAN firewalls. Devices with an insecure configuration have been identified to be directly exposed to the internet.

A missing authentication for critical function vulnerability in SUNNET Corporate Training Management System before 10.11 allows remote attackers to access deployment functionality without prior authentication.

SS1 Ver.16.0.0.10 and earlier (Media version:16.0.0a and earlier) allows a remote unauthenticated attacker to upload arbitrary files and execute OS commands with SYSTEM privileges.

A missing authentication for critical function vulnerability in the client application of Soar Cloud HRD Human Resource Management System through version 7.3.2025.0408 allows remote attackers to bypass authentication and access application functions.

Dover Fueling Solutions ProGauge MagLink LX Consoles expose an undocumented and unauthenticated target communication framework (TCF) interface on a specific port. Files can be created, deleted, or modified, potentially leading to remote code execution.

Burk Technology ARC Solo's password change mechanism can be utilized without proper authentication procedures, allowing an attacker to take over the device. A password change request can be sent directly to the device's HTTP endpoint without providing valid credentials. The system does not enforce proper authentication or session validation, allowing the password change to proceed without verifying the request's legitimacy.

The web management interface of Okcat Parking Management Platform from ZONG YU has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to directly access system functions. These functions include opening gates, viewing license plates and parking records, and restarting the system.

TEM Opera Plus FM Family Transmitter allows access to an unprotected endpoint that allows MPFS File System binary image upload without authentication. This file system serves as the basis for the HTTP2 web server module but is also used by the SNMP module and is available to other applications that require basic read-only storage capabilities. This can be exploited to overwrite the flash program memory that holds the web server's main interfaces and execute arbitrary code.

A remote code execution vulnerability exists in HybridAuth versions 2.0.9 through 2.2.2 due to insecure use of the install.php installation script. The script remains accessible after deployment and fails to sanitize input before writing to the application’s config.php file. An unauthenticated attacker can inject arbitrary PHP code into config.php, which is later executed when the file is loaded. This allows attackers to achieve remote code execution on the server. Exploitation of this issue will overwrite the existing configuration, rendering the application non-functional.

An unrestricted file upload vulnerability exists in MiniWeb HTTP Server <= Build 300 that allows unauthenticated remote attackers to upload arbitrary files to the server’s filesystem. By abusing the upload handler and crafting a traversal path, an attacker can place a malicious .exe in system32, followed by a .mof file in the WMI directory. This triggers execution of the payload with SYSTEM privileges via the Windows Management Instrumentation service. The exploit is only viable on Windows versions prior to Vista.

An unauthenticated arbitrary file upload vulnerability exists in FlashChat versions 6.0.2 and 6.0.4 through 6.0.8. The upload.php endpoint fails to properly validate file types and authentication, allowing attackers to upload malicious PHP scripts. Once uploaded, these scripts can be executed remotely, resulting in arbitrary code execution as the web server user.

Uploadify WordPress plugin versions up to and including 1.0 contain an arbitrary file upload vulnerability in process_upload.php due to missing file type validation. An unauthenticated remote attacker can upload arbitrary files to the affected WordPress site, which may allow remote code execution by uploading executable content to a web-accessible location.

TinyWebGallery v2.5 contains a remote code execution vulnerability in the admin upload functionality that allows unauthenticated attackers to upload malicious PHP files. Attackers can upload .phar files with embedded system commands to execute arbitrary code on the server by accessing the uploaded file's URL.

phpKF CMS 3.00 Beta y6 contains an unauthenticated file upload vulnerability that allows remote attackers to execute arbitrary code by bypassing file extension checks. Attackers can upload a PHP file disguised as a PNG, rename it, and execute system commands through a crafted web shell parameter.