The BGP implementation in Cisco NX-OS does not properly filter AS paths, which allows remote attackers to cause a denial of service (BGP service reset and resync) via a malformed UPDATE message, aka Bug ID CSCtn13055.

A vulnerability in the web-based GUI of Cisco Integrated Management Controller (IMC) 3.0(1c) could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability exists because the affected software does not sufficiently sanitize user-supplied HTTP input. An attacker could exploit this vulnerability by sending an HTTP POST request that contains crafted, deserialized user data to the affected software. A successful exploit could allow the attacker to execute arbitrary commands with root-level privileges on the affected system, which the attacker could use to conduct further attacks. Cisco Bug IDs: CSCvd14591.

A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system and execute them using root-level privileges. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as a user with root-level privileges.

A vulnerability in the web-based management interface of Cisco Small Business 200 Series Smart Switches, Cisco Small Business 300 Series Managed Switches, and Cisco Small Business 500 Series Stackable Managed Switches could allow an unauthenticated, remote attacker to render the web-based management interface unusable, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to cause a permanent invalid redirect for requests sent to the web-based management interface of the device, resulting in a DoS condition.

The Cisco Unified IP Phone 8945 with software 9.3(2) allows remote attackers to cause a denial of service (device hang) via a malformed PNG file, aka Bug ID CSCud04270.

A vulnerability in the Telnet CLI command of Cisco NX-OS System Software 7.1 through 7.3 running on Cisco Nexus Series Switches could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into the Telnet CLI command. An exploit could allow the attacker to read or write arbitrary files at the user's privilege level outside of the user's path. Cisco Bug IDs: CSCvb86771.

A vulnerability in the DNS input packet processor for Cisco Prime Network Registrar could allow an unauthenticated, remote attacker to cause the DNS process to momentarily restart, which could lead to a partial denial of service (DoS) condition on the affected system. The vulnerability is due to incomplete DNS packet header validation when the packet is received by the application. An attacker could exploit this vulnerability by sending a malformed DNS packet to the application. An exploit could allow the attacker to cause the DNS process to restart, which could lead to a DoS condition. This vulnerability affects Cisco Prime Network Registrar on all software versions prior to 8.3.5. Cisco Bug IDs: CSCvb55412.

A certain Java applet in the VPN downloader implementation in the WebLaunch feature in Cisco AnyConnect Secure Mobility Client 3.x before 3.0 MR7 on 64-bit Linux platforms does not properly restrict use of Java components, which allows remote attackers to execute arbitrary code via a crafted web site, aka Bug ID CSCty45925.

A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685.

Cisco TelePresence TC Software before 6.1 and TE Software before 4.1.3 allow remote attackers to cause a denial of service (temporary device hang) via crafted SIP packets, aka Bug ID CSCuf89557.

A vulnerability in the AutoVNF logging function of Cisco Ultra Services Framework could allow an unauthenticated, remote attacker to create arbitrary directories on the affected system. More Information: CSCvc76652. Known Affected Releases: 21.0.0.

The VPN downloader implementation in the WebLaunch feature in Cisco AnyConnect Secure Mobility Client 2.x before 2.5 MR6 on Windows, and 2.x before 2.5 MR6 and 3.x before 3.0 MR8 on Mac OS X and Linux, does not properly validate binaries that are received by the downloader process, which allows remote attackers to execute arbitrary code via vectors involving (1) ActiveX or (2) Java components, aka Bug ID CSCtw47523.

The RIP process in Cisco IOS XR allows remote attackers to cause a denial of service (process crash) via a crafted version-2 RIP packet, aka Bug ID CSCue46731.

A vulnerability in the Plug-and-Play (PnP) subsystem of the Cisco Aironet 1800, 2800, and 3800 Series Access Points running a Lightweight Access Point (AP) or Mobility Express image could allow an unauthenticated, adjacent attacker to execute arbitrary code with root privileges. The vulnerability is due to insufficient validation of PnP server responses. The PnP feature is only active while the device does not contain a configuration, such as a first time boot or after a factory reset has been issued. An attacker with the ability to respond to PnP configuration requests from the affected device can exploit the vulnerability by returning malicious PnP responses. If a Cisco Application Policy Infrastructure Controller - Enterprise Module (APIC-EM) is available on the network, the attacker would need to exploit the issue in the short window before a valid PnP response was received. If successful, the attacker could gain the ability to execute arbitrary code with root privileges on the underlying operating system of the device. Cisco has confirmed that the only vulnerable software version is 8.3.102.0. Cisco Bug IDs: CSCvb42386.

Cisco IOS XR before 4.2.1 on ASR 9000 series devices and CRS series devices allows remote attackers to cause a denial of service (packet transmission outage) via a crafted packet, aka Bug IDs CSCty94537 and CSCtz62593.

A vulnerability in the remote management access control list (ACL) feature of the Cisco CVR100W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass the remote management ACL. The vulnerability is due to incorrect implementation of the ACL decision made during the ingress connection request to the remote management interface. An attacker could exploit this vulnerability by sending a connection to the management IP address or domain name of the targeted device. A successful exploit could allow the attacker to bypass the configured remote management ACL. This can occur when the Remote Management configuration parameter is set to Disabled. This vulnerability affects Cisco CVR100W Wireless-N VPN Routers running a firmware image prior to 1.0.1.24. Cisco Bug IDs: CSCvc14457.

A vulnerability in the file check operation of Cisco ASR 5000 Series Aggregated Services Routers running the Cisco StarOS operating system could allow an authenticated, remote attacker to overwrite or modify arbitrary files on an affected system. More Information: CSCvd73726. Known Affected Releases: 21.0.v0.65839 21.3.M0.67005. Known Fixed Releases: 21.4.A0.67087 21.4.A0.67079 21.4.A0.67013 21.3.M0.67084 21.3.M0.67077 21.3.M0.66994 21.3.J0.66993 21.1.v0.67082 21.1.V0.67083.

A vulnerability in the CLI of Cisco NX-OS System Software 7.1 through 7.3 running on Cisco Nexus Series Switches could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to read or write arbitrary files at the user's privilege level outside of the user's path. Cisco Bug IDs: CSCvb86787, CSCve60516, CSCve60555.

A vulnerability in the Cisco Cluster Management Protocol (CMP) processing code in Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device or remotely execute code with elevated privileges. The Cluster Management Protocol utilizes Telnet internally as a signaling and command protocol between cluster members. The vulnerability is due to the combination of two factors: (1) the failure to restrict the use of CMP-specific Telnet options only to internal, local communications between cluster members and instead accept and process such options over any Telnet connection to an affected device; and (2) the incorrect processing of malformed CMP-specific Telnet options. An attacker could exploit this vulnerability by sending malformed CMP-specific Telnet options while establishing a Telnet session with an affected Cisco device configured to accept Telnet connections. An exploit could allow an attacker to execute arbitrary code and obtain full control of the device or cause a reload of the affected device. This affects Catalyst switches, Embedded Service 2020 switches, Enhanced Layer 2 EtherSwitch Service Module, Enhanced Layer 2/3 EtherSwitch Service Module, Gigabit Ethernet Switch Module (CGESM) for HP, IE Industrial Ethernet switches, ME 4924-10GE switch, RF Gateway 10, and SM-X Layer 2/3 EtherSwitch Service Module. Cisco Bug IDs: CSCvd48893.

A vulnerability in the logging subsystem of the Cisco Firepower Threat Defense (FTD) Firepower Device Manager (FDM) could allow an unauthenticated, remote attacker to add arbitrary entries to the audit log. This vulnerability affects Cisco Firepower Threat Defense Software versions 6.1.x on the following vulnerable products that have enabled FDM: ASA5506-X ASA5506W-X ASA5506H-X ASA5508-X ASA5516-X ASA5512-X ASA5515-X ASA5525-X ASA5545-X ASA5555-X. More Information: CSCvb86860. Known Affected Releases: FRANGELICO. Known Fixed Releases: 6.2.0.

A vulnerability in the Autonomic Networking Infrastructure (ANI) registrar feature of Cisco IOS Software (possibly 15.2 through 15.6) and Cisco IOS XE Software (possibly 3.7 through 3.18, and 16) could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation on certain crafted packets. An attacker could exploit this vulnerability by sending a crafted autonomic network channel discovery packet to a device that has all the following characteristics: (1) running a Cisco IOS Software or Cisco IOS XE Software release that supports the ANI feature; (2) configured as an autonomic registrar; (3) has a whitelist configured. An exploit could allow the attacker to cause the affected device to reload. Note: Autonomic networking should be configured with a whitelist. Do not remove the whitelist as a workaround. Cisco Bug IDs: CSCvc42717.

A vulnerability in an internal API of the Cisco Meeting Server (CMS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected appliance. More Information: CSCvc89678. Known Affected Releases: 2.1. Known Fixed Releases: 2.1.2.

A vulnerability in the Policy deployment module of the Cisco Firepower Management Center (FMC) could allow an unauthenticated, remote attacker to prevent deployment of a complete and accurate rule base. More Information: CSCvb95281. Known Affected Releases: 6.1.0 6.2.0. Known Fixed Releases: 6.1.0.1 6.2.0.

A vulnerability in the web framework of Cisco IOS XE Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of HTTP parameters supplied by the user. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected web page parameter. The user must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects Cisco devices running Cisco IOS XE Software Release 16.2.1, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration interface was introduced in the Denali 16.2 Release of Cisco IOS XE Software. The web-based administration interface in earlier releases of Cisco IOS XE Software is not affected by this vulnerability. Cisco Bug IDs: CSCuy83069.

An HTTP Packet Processing vulnerability in the Web Bridge interface of the Cisco Meeting Server (CMS), formerly Acano Conferencing Server, could allow an authenticated, remote attacker to retrieve memory contents, which could lead to the disclosure of confidential information. In addition, the attacker could potentially cause the application to crash unexpectedly, resulting in a denial of service (DoS) condition. The attacker would need to be authenticated and have a valid session with the Web Bridge. Affected Products: This vulnerability affects Cisco Meeting Server software releases prior to 2.1.2. This product was previously known as Acano Conferencing Server. More Information: CSCvc89551. Known Affected Releases: 2.0 2.0.7 2.1. Known Fixed Releases: 2.1.2.

A vulnerability in the web interface of the Cisco Registered Envelope Service could allow an unauthenticated, remote attacker to redirect a user to a undesired web page, aka an Open Redirect. This vulnerability affects the Cisco Registered Envelope cloud-based service. More Information: CSCvc60123. Known Affected Releases: 5.1.0-015.

A vulnerability in the Autonomic Networking Infrastructure (ANI) feature of Cisco IOS Software (15.4 through 15.6) and Cisco IOS XE Software (3.7 through 3.18, and 16) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation on certain crafted packets. An attacker could exploit this vulnerability by sending a crafted IPv6 packet to a device that is running a Cisco IOS Software or Cisco IOS XE Software release that supports the ANI feature. A device must meet two conditions to be affected by this vulnerability: (1) the device must be running a version of Cisco IOS Software or Cisco IOS XE Software that supports ANI (regardless of whether ANI is configured); and (2) the device must have a reachable IPv6 interface. An exploit could allow the attacker to cause the affected device to reload. Cisco Bug IDs: CSCvc42729.

A vulnerability in the ICMP ingress packet processing of Cisco TelePresence Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause the TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation for the size of a received ICMP packet. An attacker could exploit this vulnerability by sending a crafted ICMP packet to the local IP address of the targeted endpoint. A successful exploit could allow the attacker to cause a DoS of the TelePresence endpoint, during which time calls could be dropped. This vulnerability would affect either IPv4 or IPv6 ICMP traffic. This vulnerability affects the following Cisco TelePresence products when running software release CE8.1.1, CE8.2.0, CE8.2.1, CE8.2.2, CE 8.3.0, or CE8.3.1: Spark Room OS, TelePresence DX Series, TelePresence MX Series, TelePresence SX Quick Set Series, TelePresence SX Series. Cisco Bug IDs: CSCvb95396.

A vulnerability in a proprietary device driver in the kernel of Cisco TelePresence Multipoint Control Unit (MCU) Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. The vulnerability is due to improper size validation when reassembling fragmented IPv4 or IPv6 packets. An attacker could exploit this vulnerability by sending crafted IPv4 or IPv6 fragments to a port receiving content in Passthrough content mode. An exploit could allow the attacker to overflow a buffer. If successful, the attacker could execute arbitrary code or cause a DoS condition on the affected system. Cisco TelePresence MCU platforms TelePresence MCU 5300 Series, TelePresence MCU MSE 8510 and TelePresence MCU 4500 are affected when running software version 4.3(1.68) or later configured for Passthrough content mode. Cisco has released software updates that address this vulnerability. Workarounds that address this vulnerability are not available, but mitigations are available. Cisco Bug IDs: CSCuu67675.

An Access-Control Filtering Mechanisms Bypass vulnerability in certain access-control filtering mechanisms on Cisco Nexus 7000 Series Switches could allow an unauthenticated, remote attacker to bypass defined traffic configured within an access control list (ACL) on the affected system. More Information: CSCtz59354. Known Affected Releases: 5.2(4) 6.1(3)S5 6.1(3)S6 6.2(1.121)S0 7.2(1)D1(1) 7.3(0)ZN(0.161) 7.3(1)N1(0.1). Known Fixed Releases: 7.3(0)D1(1) 6.2(2) 6.1(5) 8.3(0)KMT(0.24) 8.3(0)CV(0.337) 7.3(1)N1(1) 7.3(0)ZN(0.210) 7.3(0)ZN(0.177) 7.3(0)ZD(0.194) 7.3(0)TSH(0.99) 7.3(0)SC(0.14) 7.3(0)RSP(0.7) 7.3(0)N1(1) 7.3(0)N1(0.193) 7.3(0)IZN(0.13) 7.3(0)IB(0.102) 7.3(0)GLF(0.44) 7.3(0)D1(0.178) 7.1(0)D1(0.14) 7.0(3)ITI2(1.6) 7.0(3)ISH1(2.13) 7.0(3)IFD6(0.78) 7.0(3)IFD6(0) 7.0(3)IDE6(0.12) 7.0(3)IDE6(0) 7.0(3)I2(1) 7.0(3)I2(0.315) 7.0(1)ZD(0.3) 7.0(0)ZD(0.84) 6.2(1.149)S0 6.2(0.285) 6.1(5.32)S0 6.1(4.97)S0 6.1(2.30)S0.

The VPN downloader implementation in the WebLaunch feature in Cisco AnyConnect Secure Mobility Client 2.x before 2.5 MR6 and 3.x before 3.0 MR8 does not compare the timestamp of offered software to the timestamp of installed software, which allows remote attackers to force a version downgrade by using (1) ActiveX or (2) Java components to offer signed code that corresponds to an older software release, aka Bug ID CSCtw48681.

A vulnerability in the content scanning engine of Cisco AsyncOS Software for Cisco Email Security Appliances (ESA) could allow an unauthenticated, remote attacker to bypass configured message or content filters on the device. Affected Products: This vulnerability affects all releases prior to the first fixed release of Cisco AsyncOS Software for Cisco Email Security Appliances, both virtual and hardware appliances, if the software is configured to apply a message filter or content filter to incoming email attachments. The vulnerability is not limited to any specific rules or actions for a message filter or content filter. More Information: CSCuz16076. Known Affected Releases: 9.7.1-066 9.7.1-HP2-207 9.8.5-085. Known Fixed Releases: 10.0.1-083 10.0.1-087.

Cisco IOS before 15.1(1)SY on ASR 1000 devices, when Multicast Listener Discovery (MLD) tracking is enabled for IPv6, allows remote attackers to cause a denial of service (device reload) via crafted MLD packets, aka Bug ID CSCtz28544.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an unauthenticated, remote attacker to cause the web-based management interface to unexpectedly restart. The vulnerability is due to insufficient input validation on the web-based management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to cause the interface to restart, resulting in a denial of service (DoS) condition.

A vulnerability in the file download functions for Cisco Prime Collaboration Assurance could allow an authenticated, remote attacker to download system files that should be restricted. More Information: CSCvc99446. Known Affected Releases: 11.5(0).

The Threat Detection feature on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.0 through 8.2 before 8.2(5.20), 8.3 before 8.3(2.29), 8.4 before 8.4(3), 8.5 before 8.5(1.6), and 8.6 before 8.6(1.1) allows remote attackers to cause a denial of service (device reload) via (1) IPv4 or (2) IPv6 packets that trigger a shun event, aka Bug ID CSCtw35765.

The Smart Install feature in Cisco IOS 12.2, 15.0, 15.1, and 15.2 allows remote attackers to cause a denial of service (device reload) by sending a malformed Smart Install message over TCP, aka Bug ID CSCtt16051.

The MallocLite implementation in Cisco IOS 12.0, 12.2, 15.0, 15.1, and 15.2 allows remote attackers to cause a denial of service (Route Processor crash) via a BGP UPDATE message with a modified local-preference (aka LOCAL_PREF) attribute length, aka Bug ID CSCtq06538.

Cisco IOS 12.2 through 12.4 and 15.0 does not recognize the vrf-also keyword during enforcement of access-class commands, which allows remote attackers to establish SSH connections from arbitrary source IP addresses via a standard SSH client, aka Bug ID CSCsv86113.

Cisco IronPort Web Security Appliance AsyncOS software prior to 7.5 has a SSL Certificate Caching vulnerability which could allow man-in-the-middle attacks

Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.4 before 8.4(2.11) and 8.5 before 8.5(1.4) allow remote attackers to cause a denial of service (device reload) via (1) IPv4 or (2) IPv6 packets that trigger syslog message 305006, aka Bug ID CSCts39634.

Cisco IOS 12.2 through 12.4 and 15.0 does not recognize the vrf-also keyword during enforcement of access-class commands, which allows remote attackers to establish TELNET connections from arbitrary source IP addresses via a standard TELNET client, aka Bug ID CSCsi77774.

Cisco IOS XE 3.4 before 3.4.5S, and 3.5 through 3.7 before 3.7.1S, on 1000 series Aggregation Services Routers (ASR) does not properly implement the Cisco Multicast Leaf Recycle Elimination (MLRE) feature, which allows remote attackers to cause a denial of service (card reload) via fragmented IPv6 MVPN (aka MVPNv6) packets, aka Bug ID CSCub34945, a different vulnerability than CVE-2013-1164.

The UDP inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.0 before 8.0(5.25), 8.1 before 8.1(2.50), 8.2 before 8.2(5.5), 8.3 before 8.3(2.22), 8.4 before 8.4(2.1), and 8.5 before 8.5(1.2) does not properly handle flows, which allows remote attackers to cause a denial of service (device reload) via a crafted series of (1) IPv4 or (2) IPv6 UDP packets, aka Bug ID CSCtq10441.

Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 7.0 through 7.2 before 7.2(5.7), 8.0 before 8.0(5.27), 8.1 before 8.1(2.53), 8.2 before 8.2(5.8), 8.3 before 8.3(2.25), 8.4 before 8.4(2.5), and 8.5 before 8.5(1.2) and the Firewall Services Module (FWSM) 3.1 and 3.2 before 3.2(23) and 4.0 and 4.1 before 4.1(8) in Cisco Catalyst 6500 series devices, when multicast routing is enabled, allow remote attackers to cause a denial of service (device reload) via a crafted IPv4 PIM message, aka Bug IDs CSCtr47517 and CSCtu97367.

Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

The Cisco Security Service in Cisco AnyConnect Secure Mobility Client (aka AnyConnect VPN Client) does not properly verify files, which allows local users to gain privileges via unspecified vectors, aka Bug ID CSCud14153.

Multiple vulnerabilities in the Application Level Gateway (ALG) for the Network Address Translation (NAT) feature of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the ALG and open unauthorized connections with a host located behind the ALG. For more information about these vulnerabilities, see the Details section of this advisory. Note: These vulnerabilities have been publicly discussed as NAT Slipstreaming.