A vulnerability in lack of validation of user-supplied parameters pass to XML-RPC calls on SonicWall Global Management System (GMS) virtual appliance's, allow remote user to execute arbitrary code. This vulnerability affected GMS version 8.1 and earlier.

A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in wangzhixuan spring-shiro-training up to 94812c1fd8f7fe796c931f4984ff1aa0671ab562. It has been declared as critical. This vulnerability affects unknown code of the file /role/add. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available.

A vulnerability, which was classified as critical, was found in Vaelsys 4.1.0. This affects the function execute_DataObjectProc of the file /grid/vgrid_server.php. The manipulation of the argument xajaxargs leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability in the function recvSlaveCloudCheckStatus of TOTOLINK Technology routers T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 and T10 V2_Firmware V4.1.8cu.5207_B20210320 allows attackers to execute arbitrary commands via a crafted MQTT packet.

A command injection vulnerability in the function recvSlaveUpgstatus of TOTOLINK Technology routers T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 and T10 V2_Firmware V4.1.8cu.5207_B20210320 allows attackers to execute arbitrary commands via a crafted MQTT packet.

The cliserver implementation in Dell SonicWALL GMS, Analyzer, and UMA EM5000 7.2, 8.0, and 8.1 before Hotfix 168056 allows remote attackers to deserialize and execute arbitrary Java code via crafted XML data.

webdist CGI program (webdist.cgi) in SGI IRIX allows remote attackers to execute arbitrary commands via shell metacharacters in the distloc parameter.

A command injection vulnerability in the function meshSlaveDlfw of TOTOLINK Technology router T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 allows attackers to execute arbitrary commands via a crafted MQTT packet.

A command injection vulnerability exists in the run-llama/llama_index repository, specifically within the safe_eval function. Attackers can bypass the intended security mechanism, which checks for the presence of underscores in code generated by LLM, to execute arbitrary code. This is achieved by crafting input that does not contain an underscore but still results in the execution of OS commands. The vulnerability allows for remote code execution (RCE) on the server hosting the application.

An issue was discovered on ASMAX AR-804gu 66.34.1 devices. There is Command Injection via the cgi-bin/script query string.

A command injection vulnerability in the function recv_mesh_info_sync of TOTOLINK Technology router T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 allows attackers to execute arbitrary commands via a crafted MQTT packet.

The validateAdminConfig handler in the Analytics Management Console in HPE Vertica 7.0.x before 7.0.2.12, 7.1.x before 7.1.2-12, and 7.2.x before 7.2.2-1 allows remote attackers to execute arbitrary commands via the mcPort parameter, aka ZDI-CAN-3417.

A command injection vulnerability in the function updateWifiInfo of TOTOLINK Technology routers T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 and T10 V2_Firmware V4.1.8cu.5207_B20210320 allows attackers to execute arbitrary commands via a crafted MQTT packet.

A command injection vulnerability in the function meshSlaveUpdate of TOTOLINK Technology routers T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 and T10 V2_Firmware V4.1.8cu.5207_B20210320 allows attackers to execute arbitrary commands via a crafted MQTT packet.

A command injection vulnerability in the function setUpgradeFW of TOTOLINK Technology router T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 allows attackers to execute arbitrary commands via a crafted MQTT packet.

A command injection vulnerability in the function isAssocPriDevice of TOTOLINK Technology router T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 allows attackers to execute arbitrary commands via a crafted MQTT packet.

Mailcwp remote file upload vulnerability incomplete fix v1.100

Cisco Prime Network Analysis Module (NAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) and Prime Virtual Network Analysis Module (vNAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) allow remote attackers to execute arbitrary OS commands via a crafted HTTP request, aka Bug ID CSCuy21882.

A Command Injection issue was discovered in Nortek Linear eMerge E3 series Versions V0.32-07e and prior. A remote attacker may be able to execute arbitrary code on a target machine with elevated privileges.

On Seowon Intech routers, there is a Command Injection vulnerability in diagnostic.cgi via shell metacharacters in the ping_ipaddr parameter.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetDMZ. This vulnerability allows attackers to execute arbitrary commands via the dmzHost1 parameter.

Tenda AX3 v16.03.12.10_CN was discovered to contain a command injection vulnerability in the function WanParameterSetting. This vulnerability allows attackers to execute arbitrary commands via the gateway, dns1, and dns2 parameters.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetIpSecTunnel. This vulnerability allows attackers to execute arbitrary commands via the IPsecLocalNet and IPsecRemoteNet parameters.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetQvlanList. This vulnerability allows attackers to execute arbitrary commands via the qvlanIP parameter.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetIpGroup. This vulnerability allows attackers to execute arbitrary commands via the IPGroupStartIP and IPGroupEndIP parameters.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetPppoeServer. This vulnerability allows attackers to execute arbitrary commands via the pppoeServerIP, pppoeServerStartIP, and pppoeServerEndIP parameters.

Tenda AX3 v16.03.12.10_CN was discovered to contain a command injection vulnerability in the function formSetSafeWanWebMan. This vulnerability allows attackers to execute arbitrary commands via the remoteIp parameter.

The isMail transport in PHPMailer before 5.2.20 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code by leveraging improper interaction between the escapeshellarg function and internal escaping performed in the mail function in PHP. NOTE: this vulnerability exists because of an incorrect fix for CVE-2016-10033.

Jensen of Scandinavia AS Air:Link 3G (AL3G) version 2.23m (Rev. 3), Air:Link 5000AC (AL5000AC) version 1.13, and Air:Link 59300 (AL59300) version 1.04 (Rev. 4) devices allow remote attackers to execute arbitrary commands via shell metacharacters to certain /goform/* pages.

Unauthenticated Remote Command injection as root occurs in the Western Digital MyCloud NAS 2.11.142 index.php page via a modified Cookie header.

Tenda AX3 v16.03.12.10_CN was discovered to contain a command injection vulnerability in the function mDMZSetCfg. This vulnerability allows attackers to execute arbitrary commands via the dmzIp parameter.

A vulnerability was found in Fujian Kelixun 1.0. It has been classified as critical. This affects an unknown part of the file /app/fax/fax_view.php of the component Filename Handler. The manipulation of the argument fax_file leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Concatenating unsanitized user input in the `whereis` npm module < 0.4.1 allowed an attacker to execute arbitrary commands. The `whereis` module is deprecated and it is recommended to use the `which` npm module instead.

In Schneider Electric U.motion Builder software versions prior to v1.3.4, a remote command injection allows authentication bypass.

The setFrom function in the Sendmail adapter in the zend-mail component before 2.4.11, 2.5.x, 2.6.x, and 2.7.x before 2.7.2, and Zend Framework before 2.4.11 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code via a \" (backslash double quote) in a crafted e-mail address.

Unauthenticated Remote Command injection as root occurs in the Western Digital MyCloud NAS 2.11.142 /web/google_analytics.php URL via a modified arg parameter in the POST data.

active-support ruby gem 5.2.0 could allow a remote attacker to execute arbitrary code on the system, caused by containing a malicious backdoor. An attacker could exploit this vulnerability to execute arbitrary code on the system.

Haraka version 2.8.8 and earlier comes with a plugin for processing attachments for zip files. Versions 2.8.8 and earlier can be vulnerable to command injection.

The mail transport (aka Swift_Transport_MailTransport) in Swift Mailer before 5.4.5 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code via a \" (backslash double quote) in a crafted e-mail address in the (1) From, (2) ReturnPath, or (3) Sender header.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in D-Link DNS-320L, DNS-325, DNS-327L and DNS-340L up to 20240403. Affected is an unknown function of the file /cgi-bin/nas_sharing.cgi of the component HTTP GET Request Handler. The manipulation of the argument system leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-259284. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

The festivaltts4r gem for Ruby allows remote attackers to execute arbitrary commands via shell metacharacters in a string to the (1) to_speech or (2) to_mp3 method in lib/festivaltts4r/festival4r.rb.

Command injection vulnerability in login.php in Synology Photo Station before 6.5.3-3226 allows remote attackers to execute arbitrary code via shell metacharacters in the crafted 'X-Forwarded-For' header.

An issue was discovered on SendQuick Entera and Avera devices before 2HF16. Multiple Command Injection vulnerabilities allow attackers to execute arbitrary system commands.

picocom before 2.0 has a command injection vulnerability in the 'send and receive file' command because the command line is executed by /bin/sh unsafely.

The firmware on Moxa TN-5900 devices through 3.1 allows command injection that could lead to device damage.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetWLanApcliSettings. This vulnerability allows attackers to execute arbitrary commands via the ApCliKeyStr parameter.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetWLanACLSettings. This vulnerability allows attackers to execute arbitrary commands via the wl(0).(0)_maclist parameter.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function ChgSambaUserSettings. This vulnerability allows attackers to execute arbitrary commands via the samba_name parameter.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetStationSettings. This vulnerability allows attackers to execute arbitrary commands via the station_access_enable parameter.