The XML parser in Cisco Adaptive Security Appliance (ASA) Software 8.4 before 8.4(7.28), 8.6 before 8.6(1.17), 9.0 before 9.0(4.33), 9.1 before 9.1(6), 9.2 before 9.2(3.4), and 9.3 before 9.3(3), when Clientless SSL VPN, AnyConnect SSL VPN, or AnyConnect IKEv2 VPN is used, allows remote attackers to cause a denial of service (VPN outage or device reload) via a crafted XML document, aka Bug ID CSCus95290.

Cross-site request forgery (CSRF) vulnerability in Cisco Headend Digital Broadband Delivery System allows remote attackers to hijack the authentication of arbitrary users.

The Lights-Out Management (LOM) implementation in Cisco FireSIGHT System Software 5.3.0 on Sourcefire 3D Sensor devices allows remote authenticated users to perform arbitrary Baseboard Management Controller (BMC) file uploads via unspecified vectors, aka Bug ID CSCus87938.

Cisco Unified Communications Manager 10.0(1.10000.12) allows local users to gain privileges via a command string in an unspecified parameter, aka Bug ID CSCut19546.

Cisco Conductor for Videoscape 3.0 and Cisco Headend System Release allow remote attackers to inject arbitrary cookies via a crafted HTTP request, aka Bug ID CSCuh25408.

Cisco IP Phone 7861, when firmware from Cisco Unified Communications Manager 10.3(1) is used, allows remote attackers to cause a denial of service via crafted packets, aka Bug ID CSCus81800.

Cisco Videoscape Distribution Suite Service Broker (aka VDS-SB), when a VDSM configuration on UCS is used, and Videoscape Distribution Suite for Internet Streaming (aka VDS-IS or CDS-IS) before 3.3.1 R7 and 4.x before 4.0.0 R4 allow remote attackers to cause a denial of service (device reload) via a crafted HTTP request, aka Bug IDs CSCus79834 and CSCuu63409.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as the root user. The attacker must be authenticated on the affected device as a low-privileged user to exploit this vulnerability. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by injecting arbitrary commands to a file as a lower-privileged user. The commands are then executed on the device by the root user. A successful exploit could allow the attacker to execute arbitrary commands as the root user.

Multiple vulnerabilities in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system, gain access to sensitive information, and view information that they are not authorized to access. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or allow an authenticated, local attacker to gain escalated privileges on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client Software could allow an authenticated, local attacker to overwrite VPN profiles on an affected device. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process. A successful exploit could allow the attacker to modify VPN profile files. To exploit this vulnerability, the attacker must have valid credentials on the affected system.

Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow a remote attacker with network-operator privileges to conduct a cross-site scripting (XSS) attack or a reflected file download (RFD) attack against a user of the interface. For more information about these vulnerabilities, see the Details section of this advisory.

The Autonomic Networking Infrastructure (ANI) implementation in Cisco IOS 12.2, 12.4, 15.0, 15.2, 15.3, and 15.4 and IOS XE 3.10.xS through 3.13.xS before 3.13.1S allows remote attackers to cause a denial of service (device reload) via spoofed AN messages, aka Bug ID CSCup62315.

Cisco IOS XE before 3.7.5S on ASR 1000 devices does not properly handle route adjacencies, which allows remote attackers to cause a denial of service (device hang) via crafted IP packets, aka Bug ID CSCub31873.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow a remote attacker with network-operator privileges to conduct a cross-site scripting (XSS) attack or a reflected file download (RFD) attack against a user of the interface. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Protocol Independent Multicast (PIM) feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted PIM packet to an affected device. A successful exploit could allow the attacker to cause a traffic loop, resulting in a DoS condition.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute denial of service (DoS) attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or allow an authenticated, local attacker to gain escalated privileges on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the software-based SSL/TLS message handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message through an affected device. SSL/TLS messages sent to an affected device do not trigger this vulnerability. A successful exploit could allow the attacker to cause a process to crash. This crash would then trigger a reload of the device. No manual intervention is needed to recover the device after the reload.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in Cisco Jabber for Windows, Cisco Jabber for Mac, and Cisco Jabber for mobile platforms could allow an attacker to access sensitive information or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device that is running in multi-instance mode. This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A vulnerability in the vDaemon service of Cisco SD-WAN vManage Software could allow an authenticated, local attacker to cause a buffer overflow on an affected system, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete bounds checks for data that is provided to the vDaemon service of an affected system. An attacker could exploit this vulnerability by sending malicious data to the vDaemon listening service on the affected system. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected system, which could allow the attacker to cause the vDaemon listening service to reload and result in a DoS condition.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

The High Availability (HA) subsystem in Cisco NX-OS on MDS 9000 devices allows remote attackers to cause a denial of service via crafted traffic, aka Bug ID CSCuo09129.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

The Forgot Password feature in Cisco WebEx Meetings Server 1.5(.1.131) and earlier allows remote attackers to enumerate administrative accounts via crafted packets, aka Bug IDs CSCuj67166 and CSCuj67159.

Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.

Multiple vulnerabilities in Cisco Jabber for Windows, Cisco Jabber for Mac, and Cisco Jabber for mobile platforms could allow an attacker to access sensitive information or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow a remote attacker with network-operator privileges to conduct a cross-site scripting (XSS) attack or a reflected file download (RFD) attack against a user of the interface. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow a remote attacker with network-operator privileges to conduct a cross-site scripting (XSS) attack or a reflected file download (RFD) attack against a user of the interface. For more information about these vulnerabilities, see the Details section of this advisory.

Cisco Adaptive Security Appliance (ASA) Software, when a DHCPv6 relay is configured, allows remote attackers to cause a denial of service (device reload) via crafted DHCP packets on the local network, aka Bug ID CSCur45455.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

A vulnerability in the MPLS Operation, Administration, and Maintenance (OAM) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper input validation when an affected device is processing an MPLS echo-request or echo-reply packet. An attacker could exploit this vulnerability by sending malicious MPLS echo-request or echo-reply packets to an interface that is enabled for MPLS forwarding on the affected device. A successful exploit could allow the attacker to cause the MPLS OAM process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition.

A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to conduct a directory traversal attack and obtain read access to sensitive files on an affected system. The vulnerability is due to insufficient validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request that contains directory traversal character sequences to an affected system. A successful exploit could allow the attacker to write arbitrary files on the affected system.

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the affected device. Cisco has not released software updates that address this vulnerability.

Cisco 6000, 6500, and 7600 series systems with Multilayer Switch Feature Card 2 (MSFC2) and a FlexWAN or OSM module allow local users to cause a denial of service (hang or reset) by sending a layer 2 frame packet that encapsulates a layer 3 packet, but has inconsistent length values with that packet.

A vulnerability in the configuration and management database of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to execute arbitrary commands with the privileges of the vmanage user in the configuration management system of the affected software. The vulnerability is due to insufficient validation of command arguments that are passed to the configuration and management database of the affected software. An attacker could exploit this vulnerability by creating custom functions that contain malicious code and are executed as the vmanage user of the configuration management system. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the vmanage user in the configuration management system of the affected software. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69937.

A vulnerability in the ACS Report component of Cisco Secure Access Control System (ACS) could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected system. Commands executed by the attacker are processed at the targeted user's privilege level. The vulnerability is due to insufficient validation of the Action Message Format (AMF) protocol. An attacker could exploit this vulnerability by sending a crafted AMF message that contains malicious code to a targeted user. A successful exploit could allow the attacker to execute arbitrary commands on the ACS device. This vulnerability affects all releases of Cisco Secure ACS prior to Release 5.8 Patch 7. Cisco Bug IDs: CSCve69037.

A vulnerability in certain CLI commands of Cisco Identity Services Engine (ISE) could allow an authenticated, local attacker to execute arbitrary commands on the host operating system with the privileges of the local user, aka Command Injection. These commands should have been restricted from this user. The vulnerability is due to insufficient input validation of CLI command user input. An attacker could exploit this vulnerability by authenticating to the targeted device and issuing a CLI command with crafted user input. A successful exploit could allow the attacker to execute arbitrary commands on the affected system that should be restricted. The attacker would need to have valid user credentials for the device. Cisco Bug IDs: CSCvf49844.

A vulnerability in the Cisco Discovery Protocol component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on the affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2 adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. This vulnerability affects the following if configured to use Cisco Discovery Protocol: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc22202, CSCvc22205, CSCvc22208, CSCvc88078, CSCvc88150, CSCvc88159, CSCvc88162, CSCvc88167.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to send a malicious packet to the management interface on an affected system and execute a command-injection exploit. The vulnerability is due to incorrect input validation of user-supplied data to the NX-API subsystem. An attacker could exploit this vulnerability by sending a malicious HTTP or HTTPS packet to the management interface of an affected system that has the NX-API feature enabled. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. Note: NX-API is disabled by default. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd47415, CSCve03216, CSCve03224, CSCve03234.

A vulnerability in the Real-Time Transport Protocol (RTP) bitstream processing of the Cisco Meeting Server could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient input validation of incoming RTP bitstreams. An attacker could exploit this vulnerability by sending a crafted RTP bitstream to an affected Cisco Meeting Server. A successful exploit could allow the attacker to deny audio and video services by causing media process crashes resulting in a DoS condition on the affected product. This vulnerability affects Cisco Meeting Server deployments that are running Cisco Meeting Server Software Releases 2.0, 2.1, 2.2, and 2.3. Cisco Bug IDs: CSCve79693, CSCvf91393, CSCvg64656, CSCvh30725, CSCvi86363.