A vulnerability in the Flexible NetFlow Version 9 packet processor of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper validation of parameters in a Flexible NetFlow Version 9 record. An attacker could exploit this vulnerability by sending a malformed Flexible NetFlow Version 9 packet to the Control and Provisioning of Wireless Access Points (CAPWAP) data port of an affected device. An exploit could allow the attacker to trigger an infinite loop, resulting in a process crash that would cause a reload of the device.

A vulnerability in the antispam protection mechanisms of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass the URL reputation filters on an affected device. The vulnerability is due to insufficient input validation of URLs. An attacker could exploit this vulnerability by crafting the URL in a particular way. A successful exploit could allow the attacker to bypass the URL reputation filters that are configured for the affected device, which could allow malicious URLs to pass through the device.

A vulnerability in the archive utility of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to conduct directory traversal attacks on an affected device. The vulnerability is due to a lack of proper input validation of paths that are embedded within archive files. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to write arbitrary files in the system with the privileges of the logged-in user.

A vulnerability in the Cisco Discovery Protocol implementation for the Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to execute code remotely or cause a reload of an affected IP Camera. The vulnerability is due to missing checks when processing Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to the targeted IP Camera. A successful exploit could allow the attacker to expose the affected IP Camera for remote code execution or cause it to reload unexpectedly, resulting in a denial of service (DoS) condition. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). This vulnerability is fixed in Video Surveillance 8000 Series IP Camera Firmware Release 1.0.7 and later.

The SQL*Net inspection engine in Cisco Adaptive Security Appliance (ASA) Software 7.x before 7.2(5.12), 8.x before 8.2(5.44), 8.3.x before 8.3(2.39), 8.4.x before 8.4(6), 8.5.x before 8.5(1.18), 8.6.x before 8.6(1.12), 8.7.x before 8.7(1.6), 9.0.x before 9.0(2.10), and 9.1.x before 9.1(2) and Firewall Services Module (FWSM) 3.1.x and 3.2.x before 3.2(27) and 4.x before 4.1(14) allows remote attackers to cause a denial of service (device reload) via crafted segmented Transparent Network Substrate (TNS) packets, aka Bug ID CSCub98434.

A vulnerability in the Cisco Discovery Protocol implementation for the Cisco IP Phone could allow an unauthenticated, adjacent attacker to remotely execute code with root privileges or cause a reload of an affected IP phone. The vulnerability is due to missing checks when processing Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to the targeted IP phone. A successful exploit could allow the attacker to remotely execute code with root privileges or cause a reload of an affected IP phone, resulting in a denial of service (DoS) condition. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

A vulnerability in the way Cisco Webex applications process Universal Communications Format (UCF) files could allow an attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient validation of UCF media files. An attacker could exploit this vulnerability by sending a user a malicious UCF file through a link or email attachment and persuading the user to open the file with the affected software on the local system. A successful exploit would cause the application to quit unexpectedly.

Multiple vulnerabilities in the Java deserialization function that is used by Cisco Security Manager could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected device. These vulnerabilities are due to insecure deserialization of user-supplied content by the affected software. An attacker could exploit these vulnerabilities by sending a malicious serialized Java object to a specific listener on an affected system. A successful exploit could allow the attacker to execute arbitrary commands on the device with the privileges of NT AUTHORITY\SYSTEM on the Windows target host. Cisco has not released software updates that address these vulnerabilities.

A vulnerability in Cisco Security Manager could allow an unauthenticated, remote attacker to access sensitive information on an affected system. The vulnerability is due to insufficient protection of static credentials in the affected software. An attacker could exploit this vulnerability by viewing source code. A successful exploit could allow the attacker to view static credentials, which the attacker could use to carry out further attacks.

A vulnerability in the Protocol Independent Multicast (PIM) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of received IPv4 PIMv2 packets. An attacker could exploit this vulnerability by sending a crafted PIMv2 packet to a PIM-enabled interface on an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition. Note: This vulnerability can be exploited with either an IPv4 multicast or unicast packet.

Cisco WebEx Meetings Server (WMS) 2.5 allows remote attackers to trigger the download of arbitrary files via a crafted URL, aka Bug ID CSCup10343.

A vulnerability in the Remote Access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition on an affected device. This vulnerability is due to improper validation of client key data after the TLS session is established. An attacker could exploit this vulnerability by sending a crafted key value to an affected system over the secure TLS session. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

The SIP implementation in Cisco TelePresence TC Software 4.x and 5.x and TE Software 4.x allows remote attackers to cause a denial of service (device reload) via crafted SIP packets, aka Bug ID CSCua64961.

A vulnerability in the PPP over Ethernet (PPPoE) termination feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, adjacent attacker to crash the ppp_ma process, resulting in a denial of service (DoS) condition. This vulnerability is due to the improper handling of malformed PPPoE packets that are received on a router that is running Broadband Network Gateway (BNG) functionality with PPPoE termination on a Lightspeed-based or Lightspeed-Plus-based line card. An attacker could exploit this vulnerability by sending a crafted PPPoE packet to an affected line card interface that does not terminate PPPoE. A successful exploit could allow the attacker to crash the ppp_ma process, resulting in a DoS condition for PPPoE traffic across the router.

A vulnerability in the web-based management interface of Cisco Secure Firewall Management Center (FMC) Software, formerly Firepower Management Center Software, could allow an authenticated, remote attacker to inject arbitrary HTML content into a device-generated document. This vulnerability is due to improper validation of user-supplied data. An attacker could exploit this vulnerability by submitting malicious content to an affected device and using the device to generate a document that contains sensitive information. A successful exploit could allow the attacker to alter the standard layout of the device-generated documents, access arbitrary files from the underlying operating system, and conduct server-side request forgery (SSRF) attacks. To successfully exploit this vulnerability, an attacker would need valid credentials for a user account with policy-editing permissions, such as Network Admin, Intrusion Admin, or any custom user role with the same capabilities.

A vulnerability in the zip decompression engine of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass content filters that are configured on an affected device. The vulnerability is due to improper handling of password-protected zip files. An attacker could exploit this vulnerability by sending a malicious file inside a crafted zip-compressed file to an affected device. A successful exploit could allow the attacker to bypass configured content filters that would normally drop the email.

The CLI in Cisco TelePresence Video Communication Server (VCS) Expressway X8.5.2 allows local users to obtain root privileges by writing script arguments to an unspecified file, aka Bug ID CSCuv12542.

Cisco NX-OS 5.2(5) on Nexus 7000 devices allows remote attackers to cause a denial of service (device crash) by sending a malformed LLDP packet on the local network, aka Bug ID CSCud89415.

The USB driver in Cisco Firepower Extensible Operating System 1.1(1.160) on Firepower 9000 devices allows physically proximate attackers to cause a denial of service via a crafted USB device that triggers invalid USB commands, aka Bug ID CSCux10531.

The web interface in Cisco Firepower Extensible Operating System 1.1(1.160) on Firepower 9000 devices does not properly restrict use of IFRAME elements, which makes it easier for remote attackers to conduct clickjacking attacks and unspecified other attacks via a crafted web site, aka Bug ID CSCux10604.

The Mobile and Remote Access (MRA) services implementation in Cisco Unified Communications Manager mishandles edge-device identity validation, which allows remote attackers to bypass intended call-reception and call-setup restrictions by spoofing a user, aka Bug ID CSCuu97283.

A vulnerability in the web management interface of Cisco Unity Connection could allow an authenticated remote attacker to overwrite files on the underlying filesystem. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web management interface. A successful exploit could allow the attacker to overwrite files on the underlying filesystem of an affected system. Valid administrator credentials are required to access the system.

A vulnerability in the email message scanning of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass configured filters on the device. The vulnerability is due to improper input validation of certain email fields. An attacker could exploit this vulnerability by sending a crafted email message to a recipient protected by the ESA. A successful exploit could allow the attacker to bypass configured message filters and inject arbitrary scripting code inside the email body. The malicious code is not executed by default unless the recipient's email client is configured to execute scripts contained in emails.

A vulnerability in the web portal of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to perform a command injection attack and execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation by the web portal framework. An attacker could exploit this vulnerability by providing malicious input during web portal authentication. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

A vulnerability in the implementation of the Intermediate System–to–Intermediate System (IS–IS) routing protocol functionality in Cisco IOS XR Software could allow an unauthenticated attacker who is in the same IS–IS area to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of crafted IS–IS link-state protocol data units (PDUs). An attacker could exploit this vulnerability by sending a crafted link-state PDU to an affected system to be processed. A successful exploit could allow the attacker to cause all routers within the IS–IS area to unexpectedly restart the IS–IS process, resulting in a DoS condition. This vulnerability affects Cisco devices if they are running a vulnerable release of Cisco IOS XR Software earlier than Release 6.6.3 and are configured with the IS–IS routing protocol. Cisco has confirmed that this vulnerability affects both Cisco IOS XR 32-bit Software and Cisco IOS XR 64-bit Software.

Multiple vulnerabilities in the smart tunnel functionality of Cisco Adaptive Security Appliance (ASA) could allow an authenticated, local attacker to elevate privileges to the root user or load a malicious library file while the tunnel is being established. For more information about these vulnerabilities, see the Details section of this security advisory.

A vulnerability in the CLI of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to overwrite or read arbitrary files. The attacker would need valid administrator privilege-level credentials. This vulnerability is due to improper input validation of CLI command arguments. An attacker could exploit this vulnerability by using directory traversal techniques when executing a vulnerable command. A successful exploit could allow the attacker to overwrite or read arbitrary files on an affected device.

A vulnerability in the attachment scanning of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass configured content filters on the device. The vulnerability is due to improper input validation of the email body. An attacker could exploit this vulnerability by naming a malicious attachment with a specific pattern. A successful exploit could allow the attacker to bypass configured content filters that would normally block the attachment.

A vulnerability in Cisco Small Business SPA500 Series IP Phones could allow a physically proximate attacker to execute arbitrary commands on the device. The vulnerability is due to improper input validation in the device configuration interface. An attacker could exploit this vulnerability by accessing the configuration interface, which may require a password, and then accessing the device's physical interface and inserting a USB storage device. A successful exploit could allow the attacker to execute arbitrary commands on the device in an elevated security context. At the time of publication, this vulnerability affected Cisco Small Business SPA500 Series IP Phones firmware releases 7.6.2SR5 and prior.

A vulnerability in the Sender Policy Framework (SPF) functionality of Cisco AsyncOS Software for Cisco Email Security Appliances (ESA) could allow an unauthenticated, remote attacker to bypass configured user filters on the device. The vulnerability is due to incomplete input and validation checking mechanisms for certain SPF messages that are sent to an affected device. An attacker could exploit this vulnerability by sending a customized SPF packet to an affected device. A successful exploit could allow the attacker to bypass the header filters that are configured for the affected device, which could allow malicious content to pass through the device.

A vulnerability in the web management interface of Cisco Small Business 220 Series Smart Switches could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a malicious request to certain parts of the web management interface. To send the malicious request, the attacker needs a valid login session in the web management interface as a privilege level 15 user. Depending on the configuration of the affected switch, the malicious request must be sent via HTTP or HTTPS. A successful exploit could allow the attacker to execute arbitrary shell commands with the privileges of the root user.

A vulnerability in the Cisco Fabric Services component of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause process crashes, which can result in a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient validation of TCP packets when processed by the Cisco Fabric Services over IP (CFSoIP) feature. An attacker could exploit this vulnerability by sending a malicious Cisco Fabric Services TCP packet to an affected device. A successful exploit could allow the attacker to cause process crashes, resulting in a device reload and a DoS condition. Note: There are three distribution methods that can be configured for Cisco Fabric Services. This vulnerability affects only distribution method CFSoIP, which is disabled by default. See the Details section for more information.

A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) Access Control List (ACL) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic. The vulnerability is due to an incorrect length check when the configured ACL name is the maximum length, which is 32 ASCII characters. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP polling that should have been denied. The attacker has no control of the configuration of the SNMP ACL name.

A vulnerability in Cisco Enterprise Network Functions Virtualization Infrastructure Software (NFVIS) could allow an authenticated, remote attacker with administrator privileges to overwrite files on the underlying operating system (OS) of an affected device. The vulnerability is due to improper input validation in an NFVIS file-system command. An attacker could exploit this vulnerability by using crafted variables during the execution of an affected command. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying OS.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an authenticated, remote attacker to execute arbitrary commands on the underlying Linux shell as the root user. Exploitation of this vulnerability requires privileged access to an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit this vulnerability by logging in to the web-based management interface with administrator privileges and then sending a malicious request to a certain part of the interface.

A vulnerability in the implementation of Intermediate System–to–Intermediate System (IS–IS) routing protocol functionality in Cisco IOS XR Software could allow an unauthenticated attacker who is in the same IS-IS area to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of IS–IS link-state protocol data units (PDUs). An attacker could exploit this vulnerability by sending specific link-state PDUs to an affected system to be processed. A successful exploit could allow the attacker to cause incorrect calculations used in the weighted remote shared risk link groups (SRLG) or in the IGP Flexible Algorithm. It could also cause tracebacks to the logs or potentially cause the receiving device to crash the IS–IS process, resulting in a DoS condition.

A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to cause the CPU utilization to increase to 100 percent, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of email messages that contain large attachments. An attacker could exploit this vulnerability by sending a malicious email message through the targeted device. A successful exploit could allow the attacker to cause a permanent DoS condition due to high CPU utilization. This vulnerability may require manual intervention to recover the ESA.

A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) and Cisco Content Security Management Appliance (SMA) could allow an unauthenticated, remote attacker to cause repeated crashes in some internal processes that are running on the affected devices, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation of email attachments. An attacker could exploit this vulnerability by sending an email message with a crafted attachment through an affected device. A successful exploit could allow the attacker to cause specific processes to crash repeatedly, resulting in the complete unavailability of both the Cisco Advanced Malware Protection (AMP) and message tracking features and in severe performance degradation while processing email. After the affected processes restart, the software resumes filtering for the same attachment, causing the affected processes to crash and restart again. A successful exploit could also allow the attacker to cause a repeated DoS condition. Manual intervention may be required to recover from this situation.

Multiple vulnerabilities in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to read arbitrary files on the underlying operating system (OS) of an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability occurs because the affected software improperly sanitizes user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying a crafted input parameter on a form in the Web UI and then submitting that form. A successful exploit could allow the attacker to run arbitrary commands on the device with root privileges, which may lead to complete system compromise.

A vulnerability in the implementation of the Short Message Service (SMS) handling functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to improper processing of SMS protocol data units (PDUs) that are encoded with a special character set. An attacker could exploit this vulnerability by sending a malicious SMS message to an affected device. A successful exploit could allow the attacker to cause the wireless WAN (WWAN) cellular interface module on an affected device to crash, resulting in a DoS condition that would require manual intervention to restore normal operating conditions.

A vulnerability in Locally Significant Certificate (LSC) management for the Cisco Wireless LAN Controller (WLC) could allow an authenticated, remote attacker to cause the device to unexpectedly restart, which causes a denial of service (DoS) condition. The attacker would need to have valid administrator credentials. The vulnerability is due to incorrect input validation of the HTTP URL used to establish a connection to the LSC Certificate Authority (CA). An attacker could exploit this vulnerability by authenticating to the targeted device and configuring a LSC certificate. An exploit could allow the attacker to cause a DoS condition due to an unexpected restart of the device.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated but unprivileged (level 1), remote attacker to run privileged Cisco IOS commands by using the web UI. The vulnerability is due to a failure to validate and sanitize input in Web Services Management Agent (WSMA) functions. An attacker could exploit this vulnerability by submitting a malicious payload to the affected device's web UI. A successful exploit could allow the lower-privileged attacker to execute arbitrary commands with higher privileges on the affected device.

A vulnerability in the web proxy functionality of Cisco AsyncOS Software for Cisco Web Security Appliance could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper validation of HTTP and HTTPS requests. An attacker could exploit this vulnerability by sending a malformed HTTP or HTTPS request to an affected device. An exploit could allow the attacker to cause a restart of the web proxy process, resulting in a temporary DoS condition.

A vulnerability in the web proxy functionality of Cisco AsyncOS Software for Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation mechanisms for certain fields in HTTP/HTTPS requests sent through an affected device. A successful attacker could exploit this vulnerability by sending a malicious HTTP/HTTPS request through an affected device. An exploit could allow the attacker to force the device to stop processing traffic, resulting in a DoS condition.

A vulnerability in the web-based management interface of Cisco Prime Infrastructure (PI) and Cisco Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to execute code with root-level privileges on the underlying operating system. This vulnerability exist because the software improperly validates user-supplied input. An attacker could exploit this vulnerability by uploading a malicious file to the administrative web interface. A successful exploit could allow the attacker to execute code with root-level privileges on the underlying operating system.

A vulnerability in the quality of service (QoS) feature of Cisco Aironet Series Access Points (APs) could allow an authenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper input validation on QoS fields within Wi-Fi frames by the affected device. An attacker could exploit this vulnerability by sending malformed Wi-Fi frames to an affected device. A successful exploit could allow the attacker to cause the affected device to crash, resulting in a DoS condition.

A vulnerability in the cryptographic driver for Cisco Adaptive Security Appliance Software (ASA) and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reboot unexpectedly. The vulnerability is due to incomplete input validation of a Secure Sockets Layer (SSL) or Transport Layer Security (TLS) ingress packet header. An attacker could exploit this vulnerability by sending a crafted TLS/SSL packet to an interface on the targeted device. An exploit could allow the attacker to cause the device to reload, which will result in a denial of service (DoS) condition. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is required to exploit this vulnerability.