go-libp2p is the offical libp2p implementation in the Go programming language. Version `0.18.0` and older of go-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits has been part of go-libp2p, this component was designed to handle the regular churn of peers, not a targeted resource exhaustion attack. Users are advised to upgrade their version of go-libp2p to version `0.18.1` or newer. Users unable to upgrade may consult the denial of service (dos) mitigation page for more information on how to incorporate mitigation strategies, monitor your application, and respond to attacks.

BAB TECHNOLOGIE GmbH eibPort V3 prior to 3.8.3 devices allow denial of service (Uncontrolled Resource Consumption) via requests to the lighttpd component.

An issue was discovered in ONOS 2.5.1. The purge-requested intent remains on the list, but it does not respond to changes in topology (e.g., link failure). In combination with other applications, it could lead to a failure of network management.

An Uncontrolled Resource Consumption vulnerability in the H.323 ALG (Application Layer Gateway) of  Juniper Networks Junos OS on SRX Series and MX Series with SPC3 and MS-MPC/MIC, allows an unauthenticated network-based attacker to send specific packets causing traffic loss leading to Denial of Service (DoS).  Continued receipt and processing of these specific packets will sustain the Denial of Service condition. The memory usage can be monitored using the below command.   user@host> show usp memory segment sha data objcache jsf  This issue affects SRX Series and MX Series with SPC3 and MS-MPC/MIC:  *  20.4 before 20.4R3-S10,  *  21.2 before 21.2R3-S6,  *  21.3 before 21.3R3-S5,  *  21.4 before 21.4R3-S6,  *  22.1 before 22.1R3-S4,  *  22.2 before 22.2R3-S2,  *  22.3 before 22.3R3-S1,  *  22.4 before 22.4R3,  *  23.2 before 23.2R2.

The ethernet-lldp component in Cisco IOS 12.2 before 12.2(33)SXJ1 does not properly support a large number of LLDP Management Address (MA) TLVs, which allows remote attackers to cause a denial of service (device crash) via crafted LLDPDUs, aka Bug ID CSCtj22354.

Traefik (pronounced traffic) is a modern HTTP reverse proxy and load balancer for deploying microservices. There is a vulnerability in Go when parsing the HTTP headers, which impacts Traefik. HTTP header parsing could allocate substantially more memory than required to hold the parsed headers. This behavior could be exploited to cause a denial of service. This issue has been patched in versions 2.9.10 and 2.10.0-rc2.

The vCenter Server contains a denial-of-service vulnerability in VPXD service. A malicious actor with network access to port 443 on vCenter Server may exploit this issue to create a denial of service condition due to excessive memory consumption by VPXD service.

Next.js is a React framework. A Denial of Service (DoS) condition was identified in Next.js. Exploitation of the bug can trigger a crash, affecting the availability of the server. his vulnerability was resolved in Next.js 13.5 and later.

Tensorflow is an Open Source Machine Learning Framework. The `GraphDef` format in TensorFlow does not allow self recursive functions. The runtime assumes that this invariant is satisfied. However, a `GraphDef` containing a fragment such as the following can be consumed when loading a `SavedModel`. This would result in a stack overflow during execution as resolving each `NodeDef` means resolving the function itself and its nodes. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range.

The package node-opcua before 2.74.0 are vulnerable to Denial of Service (DoS) when bypassing the limitations for excessive memory consumption by sending multiple CloseSession requests with the deleteSubscription parameter equal to False.

An issue discovered in H3C Magic R365 and H3C Magic R100 routers allows attackers to hijack TCP sessions which could lead to a denial of service.

Tenda FH1201 v1.2.0.14 (408) was discovered to contain a stack overflow via the PPPOEPassword parameter in the fromAdvSetWan function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted POST request.

Tensorflow is an Open Source Machine Learning Framework. During shape inference, TensorFlow can allocate a large vector based on a value from a tensor controlled by the user. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range.

DHCP Server Service Denial of Service Vulnerability

Windows Online Certificate Status Protocol (OCSP) Server Denial of Service Vulnerability

Windows Online Certificate Status Protocol (OCSP) Server Denial of Service Vulnerability

.NET and Visual Studio Denial of Service Vulnerability

A flaw was found in GLib. GVariant deserialization fails to validate that the input conforms to the expected format, leading to denial of service.

A regular expression used in Apache MXNet (incubating) is vulnerable to a potential denial-of-service by excessive resource consumption. The bug could be exploited when loading a model in Apache MXNet that has a specially crafted operator name that would cause the regular expression evaluation to use excessive resources to attempt a match. This issue affects Apache MXNet versions prior to 1.9.1.

Dell SmartFabric OS10 Software, versions 10.5.6.x, 10.5.5.x, 10.5.4.x,10.5.3.x, contains an Uncontrolled Resource Consumption vulnerability. A remote unauthenticated host could potentially exploit this vulnerability leading to a denial of service.

An issue in OneFlow-Inc. Oneflow v0.9.1 allows attackers to cause a Denial of Service (DoS) when an empty array is processed with oneflow.dot.

Zoho ManageEngine ADSelfService Plus before 6218 allows anyone to conduct a Denial-of-Service attack via the Mobile App Authentication API.

Skyport Daemon (skyportd) is the daemon for the Skyport Panel. By making thousands of folders & files (easy due to skyport's lack of rate limiting on createFolder. createFile), skyportd in a lot of cases will cause 100% CPU usage and an OOM, probably crashing the system. This is fixed in 0.2.2.

The socket implementation in net/core/sock.c in the Linux kernel before 2.6.34 does not properly manage a backlog of received packets, which allows remote attackers to cause a denial of service (memory consumption) by sending a large amount of network traffic, as demonstrated by netperf UDP tests.

Helm is a tool for managing Charts, pre-configured Kubernetes resources. Versions prior to 3.10.3 are subject to Uncontrolled Resource Consumption, resulting in Denial of Service. Input to functions in the _strvals_ package can cause a stack overflow. In Go, a stack overflow cannot be recovered from. Applications that use functions from the _strvals_ package in the Helm SDK can have a Denial of Service attack when they use this package and it panics. This issue has been patched in 3.10.3. SDK users can validate strings supplied by users won't create large arrays causing significant memory usage before passing them to the _strvals_ functions.

The socket implementation in net/core/sock.c in the Linux kernel before 2.6.35 does not properly manage a backlog of received packets, which allows remote attackers to cause a denial of service by sending a large amount of network traffic, related to the sk_add_backlog function and the sk_rmem_alloc socket field. NOTE: this vulnerability exists because of an incomplete fix for CVE-2010-4251.

libp2p-rust is the official rust language Implementation of the libp2p networking stack. In versions prior to 0.45.1 an attacker node can cause a victim node to allocate a large number of small memory chunks, which can ultimately lead to the victim’s process running out of memory and thus getting killed by its operating system. When executed continuously, this can lead to a denial of service attack, especially relevant on a larger scale when run against more than one node of a libp2p based network. Users are advised to upgrade to `libp2p` `v0.45.1` or above. Users unable to upgrade should reference the DoS Mitigation page for more information on how to incorporate mitigation strategies, monitor their application, and respond to attacks: https://docs.libp2p.io/reference/dos-mitigation/.

A vulnerability was identified in the kjd/idna library, specifically within the `idna.encode()` function, affecting version 3.6. The issue arises from the function's handling of crafted input strings, which can lead to quadratic complexity and consequently, a denial of service condition. This vulnerability is triggered by a crafted input that causes the `idna.encode()` function to process the input with considerable computational load, significantly increasing the processing time in a quadratic manner relative to the input size.

A design flaw in all versions of Go-Ethereum allows an attacker node to send 5120 pending transactions of a high gas price from one account that all fully spend the full balance of the account to a victim Geth node, which can purge all of pending transactions in a victim node's memory pool and then occupy the memory pool to prevent new transactions from entering the pool, resulting in a denial of service (DoS).

Fortra Globalscape EFT versions before 8.1.0.16 suffer from a denial of service vulnerability, where a compressed message that decompresses to itself can cause infinite recursion and crash the service

Those using HtmlUnit to browse untrusted webpages may be vulnerable to Denial of service attacks (DoS). If HtmlUnit is running on user supplied web pages, an attacker may supply content that causes HtmlUnit to crash by a stack overflow. This effect may support a denial of service attack.This issue affects htmlunit before 2.70.0.

The NPM package `braces`, versions prior to 3.0.3, fails to limit the number of characters it can handle, which could lead to Memory Exhaustion. In `lib/parse.js,` if a malicious user sends "imbalanced braces" as input, the parsing will enter a loop, which will cause the program to start allocating heap memory without freeing it at any moment of the loop. Eventually, the JavaScript heap limit is reached, and the program will crash.

A denial of service flaw was found in miekg-dns before 1.0.4. A remote attacker could use carefully timed TCP packets to block the DNS server from accepting new connections.

Nextcloud server is an open source home cloud implementation. In releases of the 25.0.x branch before 25.0.3 an inefficient fetch operation may impact server performances and/or can lead to a denial of service. This issue has been addressed and it is recommended that the Nextcloud Server is upgraded to 25.0.3. There are no known workarounds for this vulnerability.

An issue was discovered in Technitium 11.0.2. There is a vulnerability (called BadDNS) in DNS resolving software, which triggers a resolver to ignore valid responses, thus causing DoS (denial of service) for normal resolution. The effects of an exploit would be widespread and highly impactful, because the attacker could just forge a response targeting the source port of a vulnerable resolver without the need to guess the correct TXID.

Unpoly is a JavaScript framework for server-side web applications. There is a possible Denial of Service (DoS) vulnerability in the `unpoly-rails` gem that implements the Unpoly server protocol for Rails applications. This issues affects Rails applications that operate as an upstream of a load balancer's that uses passive health checks. The `unpoly-rails` gem echoes the request URL as an `X-Up-Location` response header. By making a request with exceedingly long URLs (paths or query string), an attacker can cause unpoly-rails to write a exceedingly large response header. If the response header is too large to be parsed by a load balancer downstream of the Rails application, it may cause the load balancer to remove the upstream from a load balancing group. This causes that application instance to become unavailable until a configured timeout is reached or until an active healthcheck succeeds. This issue has been fixed and released as version 2.7.2.2 which is available via RubyGems and GitHub. Users unable to upgrade may: Configure your load balancer to use active health checks, e.g. by periodically requesting a route with a known response that indicates healthiness; Configure your load balancer so the maximum size of response headers is at least twice the maximum size of a URL; or instead of changing your server configuration you may also configure your Rails application to delete redundant `X-Up-Location` headers set by unpoly-rails.

Dell PowerStore contains an Uncontrolled Resource Consumption Vulnerability in PowerStore User Interface. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to the Denial of Service.

Trustwave ModSecurity 3.0.5 through 3.0.8 before 3.0.9 allows a denial of service (worker crash and unresponsiveness) because some inputs cause a segfault in the Transaction class for some configurations.

The vulnerabilities can be exploited to cause the web visualization component of the PLC to stop and not respond, leading to genuine users losing remote visibility of the PLC state. If a user attempts to login to the PLC while this vulnerability is exploited, the PLC will show an error state and refuse connections to Automation Builder. The execution of the PLC application is not affected by this vulnerability. This issue affects ABB AC500 V2 products with onboard Ethernet.

REXML is an XML toolkit for Ruby. The REXML gem before 3.3.2 has some DoS vulnerabilities when it parses an XML that has many specific characters such as whitespace character, `>]` and `]>`. The REXML gem 3.3.3 or later include the patches to fix these vulnerabilities.

A vulnerability has been identified where a maliciously crafted message containing a specific chain of characters can cause the chat to enter a hot loop on one of the processes, consuming ~120% CPU and rendering the service unresponsive.

Any git operation is passed through Jetty and a session is created. No expiry is set for the session and Jetty does not automatically dispose of the session. Over multiple git actions, this can lead to a heap memory exhaustion for Gerrit servers. We recommend upgrading Gerrit to any of the versions listed above.

comrak is a CommonMark + GFM compatible Markdown parser and renderer written in rust. A range of quadratic parsing issues are present in Comrak. These can be used to craft denial-of-service attacks on services that use Comrak to parse Markdown. This issue has been addressed in version 0.17.0. Users are advised to upgrade. There are no known workarounds for this vulnerability. This issue is also tracked as `GHSL-2023-047`

An issue found in DUALSPACE Super Secuirty v.2.3.7 allows an attacker to cause a denial of service via the SharedPreference files.

In OpenBSD 7.2, a TCP packet with destination port 0 that matches a pf divert-to rule can crash the kernel.

In BIG-IP tenants running on r2000 and r4000 series hardware, or BIG-IP Virtual Edition (VEs) using Intel E810 SR-IOV NIC, undisclosed traffic can cause an increase in memory resource utilization.   Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Improper Restriction of TCP Communication Channel in HTTP/S inbound traffic from WAN to DMZ bypassing security policy until TCP handshake potentially resulting in Denial of Service (DoS) attack if a target host is vulnerable.

A denial-of-service vulnerability exists in Rockwell Automation FactoryTalk Transaction Manager. This vulnerability can be exploited by sending a modified packet to port 400. If exploited, the application could potentially crash or experience a high CPU or memory usage condition, causing intermittent application functionality issues. The application would need to be restarted to recover from the DoS.

crossplane-runtime is a set of go libraries used to build Kubernetes controllers in Crossplane and its related stacks. An out of memory panic vulnerability has been discovered in affected versions. Applications that use the `Paved` type's `SetValue` method with user provided input without proper validation might use excessive amounts of memory and cause an out of memory panic. In the fieldpath package, the Paved.SetValue method sets a value on the Paved object according to the provided path, without any validation. This allows setting values in slices at any provided index, which grows the target array up to the requested index, the index is currently capped at max uint32 (4294967295) given how indexes are parsed, but that is still an unnecessarily large value. If callers are not validating paths' indexes on their own, which most probably are not going to do, given that the input is parsed directly in the SetValue method, this could allow users to consume arbitrary amounts of memory. Applications that do not use the `Paved` type's `SetValue` method are not affected. This issue has been addressed in versions 0.16.1 and 0.19.2. Users are advised to upgrade. Users unable to upgrade can parse and validate the path before passing it to the `SetValue` method of the `Paved` type, constraining the index size as deemed appropriate.

Improper Handling of Exceptional Conditions, Uncontrolled Resource Consumption vulnerability in Apache Tomcat. When processing an HTTP/2 stream, Tomcat did not handle some cases of excessive HTTP headers correctly. This led to a miscounting of active HTTP/2 streams which in turn led to the use of an incorrect infinite timeout which allowed connections to remain open which should have been closed. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M20, from 10.1.0-M1 through 10.1.24, from 9.0.0-M1 through 9.0.89. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Users are recommended to upgrade to version 11.0.0-M21, 10.1.25 or 9.0.90, which fixes the issue.