The DNS-over-TCP implementation in Cisco IOS 12.2 and 15.0 through 15.3, when NAT is used, allows remote attackers to cause a denial of service (device reload) via a crafted IPv4 DNS TCP stream, aka Bug ID CSCuf28733.

The PPTP implementation in Cisco IOS 12.2 and 15.0 through 15.3, when NAT is used, allows remote attackers to cause a denial of service (device reload) via crafted TCP port-1723 packets, aka Bug ID CSCtq14817.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as the root user. The attacker must be authenticated on the affected device as a low-privileged user to exploit this vulnerability. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by injecting arbitrary commands to a file as a lower-privileged user. The commands are then executed on the device by the root user. A successful exploit could allow the attacker to execute arbitrary commands as the root user.

Multiple vulnerabilities in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system, gain access to sensitive information, and view information that they are not authorized to access. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system, gain access to sensitive information, and view information that they are not authorized to access. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the API of Cisco Meeting Server could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because requests that are sent to the API are not properly validated. An attacker could exploit this vulnerability by sending a malicious request to the API. A successful exploit could allow the attacker to cause all participants on a call to be disconnected, resulting in a DoS condition.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or allow an authenticated, local attacker to gain escalated privileges on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client Software could allow an authenticated, local attacker to overwrite VPN profiles on an affected device. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process. A successful exploit could allow the attacker to modify VPN profile files. To exploit this vulnerability, the attacker must have valid credentials on the affected system.

Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow a remote attacker with network-operator privileges to conduct a cross-site scripting (XSS) attack or a reflected file download (RFD) attack against a user of the interface. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow a remote attacker with network-operator privileges to conduct a cross-site scripting (XSS) attack or a reflected file download (RFD) attack against a user of the interface. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Protocol Independent Multicast (PIM) feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted PIM packet to an affected device. A successful exploit could allow the attacker to cause a traffic loop, resulting in a DoS condition.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute denial of service (DoS) attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or allow an authenticated, local attacker to gain escalated privileges on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the software-based SSL/TLS message handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message through an affected device. SSL/TLS messages sent to an affected device do not trigger this vulnerability. A successful exploit could allow the attacker to cause a process to crash. This crash would then trigger a reload of the device. No manual intervention is needed to recover the device after the reload.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in Cisco Jabber for Windows, Cisco Jabber for Mac, and Cisco Jabber for mobile platforms could allow an attacker to access sensitive information or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device that is running in multi-instance mode. This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A vulnerability in the vDaemon service of Cisco SD-WAN vManage Software could allow an authenticated, local attacker to cause a buffer overflow on an affected system, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete bounds checks for data that is provided to the vDaemon service of an affected system. An attacker could exploit this vulnerability by sending malicious data to the vDaemon listening service on the affected system. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected system, which could allow the attacker to cause the vDaemon listening service to reload and result in a DoS condition.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

Buffer overflow in the web-application interface on Cisco 9900 IP phones allows remote attackers to cause a denial of service (webapp interface outage) via long values in unspecified fields, aka Bug ID CSCuh10343.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Jabber for Windows, Cisco Jabber for Mac, and Cisco Jabber for mobile platforms could allow an attacker to access sensitive information or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow a remote attacker with network-operator privileges to conduct a cross-site scripting (XSS) attack or a reflected file download (RFD) attack against a user of the interface. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow a remote attacker with network-operator privileges to conduct a cross-site scripting (XSS) attack or a reflected file download (RFD) attack against a user of the interface. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Open Network Environment Platform (ONEP) in Cisco NX-OS allows remote authenticated users to cause a denial of service (network-element reload) via a crafted packet, aka Bug ID CSCui51551.

The image-upgrade functionality on Cisco 9900 Unified IP phones allows local users to gain privileges by placing shell commands in an unspecified parameter, aka Bug ID CSCuh10334.

The fabric-interconnect component in Cisco Unified Computing System (UCS) allows local users to cause a denial of service via crafted command parameters that trigger hardware-component write operations, aka Bug ID CSCtq86549.

A vulnerability in the Cisco Cluster Management Protocol (CMP) processing code in Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device or remotely execute code with elevated privileges. The Cluster Management Protocol utilizes Telnet internally as a signaling and command protocol between cluster members. The vulnerability is due to the combination of two factors: (1) the failure to restrict the use of CMP-specific Telnet options only to internal, local communications between cluster members and instead accept and process such options over any Telnet connection to an affected device; and (2) the incorrect processing of malformed CMP-specific Telnet options. An attacker could exploit this vulnerability by sending malformed CMP-specific Telnet options while establishing a Telnet session with an affected Cisco device configured to accept Telnet connections. An exploit could allow an attacker to execute arbitrary code and obtain full control of the device or cause a reload of the affected device. This affects Catalyst switches, Embedded Service 2020 switches, Enhanced Layer 2 EtherSwitch Service Module, Enhanced Layer 2/3 EtherSwitch Service Module, Gigabit Ethernet Switch Module (CGESM) for HP, IE Industrial Ethernet switches, ME 4924-10GE switch, RF Gateway 10, and SM-X Layer 2/3 EtherSwitch Service Module. Cisco Bug IDs: CSCvd48893.

Cisco Secure Access Control System (ACS) does not properly implement an incoming-packet firewall rule, which allows remote attackers to cause a denial of service (process crash) via a flood of crafted packets, aka Bug ID CSCui51521.

The TCP reassembly feature in Cisco IOS XE 3.7 before 3.7.3S and 3.8 before 3.8.1S on 1000 ASR devices allows remote attackers to cause a denial of service (device reload) via large TCP packets that are processed by the (1) NAT or (2) ALG component, aka Bug ID CSCud72509.

The web framework on Cisco Web Security Appliance (WSA), Email Security Appliance (ESA), and Content Security Management Appliance (SMA) devices does not properly manage the state of HTTP and HTTPS sessions, which allows remote attackers to cause a denial of service (management GUI outage) via multiple TCP connections, aka Bug IDs CSCuj59411, CSCuf89818, and CSCuh05635.

The auto-update implementation in Cisco Adaptive Security Appliance (ASA) Software 9.0.3.6 and earlier allows remote attackers to cause a denial of service (device reload) via crafted update data, aka Bug ID CSCui33308.

Cisco IOS 15.0 through 15.3 and IOS XE 3.2 through 3.8, when a VRF interface exists, allows remote attackers to cause a denial of service (interface queue wedge) via crafted UDP RSVP packets, aka Bug ID CSCuf17023.

The IPv6 implementation in Cisco Adaptive Security Appliance (ASA) Software 9.1.3 and earlier, when NAT64 or NAT66 is enabled, does not properly process NAT rules, which allows remote attackers to cause a denial of service (device reload) via crafted packets, aka Bug ID CSCue34342.