A vulnerability in the command-line tcpdump utility in the Cisco SD-WAN Solution could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the tcpdump utility. The attacker must be authenticated to access the tcpdump utility. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69751.

A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerability is due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit this vulnerability on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuv91356.

A vulnerability in Cisco Prime Collaboration Provisioning (PCP) Software 11.6 could allow an unauthenticated, local attacker to log in to the underlying Linux operating system. The vulnerability is due to a hard-coded account password on the system. An attacker could exploit this vulnerability by connecting to the affected system via Secure Shell (SSH) using the hard-coded credentials. A successful exploit could allow the attacker to access the underlying operating system as a low-privileged user. After low-level privileges are gained, the attacker could elevate to root privileges and take full control of the device. Cisco Bug IDs: CSCvc82982.

Cisco Wireless LAN Controller (WLC) devices with software 7.0(240.0) allow local users to execute arbitrary OS commands in a privileged context via crafted CLI commands, aka Bug ID CSCuj39474.

The boot implementation on Cisco ASR 5000 and 5500 devices with software 14.0 allows local users to execute arbitrary Linux commands by leveraging administrative privileges for storage of these commands in a Compact Flash (CF) file, aka Bug ID CSCuu75278.

The diagnostics subsystem in the administrative web interface on Cisco Virtualization Experience (aka VXC) Client 6215 devices with firmware 11.2(27.4) allows local users to gain privileges for OS command execution via a crafted option value, aka Bug ID CSCug54412.

Cisco NX-OS 6.0(2) and 6.2(2) on Nexus devices has an improper OS configuration, which allows local users to obtain root access via unspecified input to the Python interpreter, aka Bug IDs CSCun02887, CSCur00115, and CSCur00127.

The Manager component in Cisco Unified Computing System (UCS) 2.2(3b) on B Blade Server devices allows local users to gain privileges for executing arbitrary CLI commands by leveraging access to the subordinate fabric interconnect, aka Bug ID CSCut32778.

Cisco UCS Central Software 1.2(1a) allows local users to gain privileges for OS command execution via a crafted CLI parameter, aka Bug ID CSCut32795.

Cisco Secure Services Client (CSSC) 4.x, Trust Agent 1.x and 2.x, Cisco Security Agent (CSA) 5.0 and 5.1 (when a vulnerable Trust Agent has been deployed), and the Meetinghouse AEGIS SecureConnect Client do not properly parse commands, which allows local users to gain privileges via unspecified vectors, aka CSCsh30624.

The command line interface (CLI) in Cisco Unified IP Phone 7906G, 7911G, 7941G, 7961G, 7970G, and 7971G, with firmware 8.0(4)SR1 and earlier allows local users to obtain privileges or cause a denial of service via unspecified vectors. NOTE: this issue can be leveraged remotely via CVE-2007-1063.

A vulnerability in the CLI of Cisco StarOS operating system for Cisco ASR 5000 Series Routers could allow an authenticated, local attacker to elevate privileges on an affected device. The vulnerability is due to insufficient input validation of CLI commands. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user on the affected device. To exploit this vulnerability, an attacker would need to have valid credentials on an affected device and know the password for the cli test-commands command.

The CLI in Cisco TelePresence Video Communication Server (VCS) Expressway X8.5.2 allows local users to obtain root privileges by writing script arguments to an unspecified file, aka Bug ID CSCuv12542.

Cisco AnyConnect Secure Mobility Client 3.1(60) on Windows does not properly validate pathnames, which allows local users to gain privileges via a crafted INF file, aka Bug ID CSCus65862.

A vulnerability in the build procedure for certain executable system files installed at boot time on Cisco Application Policy Infrastructure Controller (APIC) devices could allow an authenticated, local attacker to gain root-level privileges. The vulnerability is due to a custom executable system file that was built to use relative search paths for libraries without properly validating the library to be loaded. An attacker could exploit this vulnerability by authenticating to the device and loading a malicious library that can escalate the privilege level. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device. The attacker must have valid user credentials to log in to the device. Cisco Bug IDs: CSCvc96087. Known Affected Releases: 1.1(0.920a), 1.1(1j), 1.1(3f); 1.2 Base, 1.2(2), 1.2(3), 1.2.2; 1.3(1), 1.3(2), 1.3(2f); 2.0 Base, 2.0(1).

A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to execute arbitrary commands on the host operating system with root privileges, aka Command Injection. More Information: CSCvb99406. Known Affected Releases: 6.2.1.BASE. Known Fixed Releases: 6.2.1.28i.BASE 6.2.1.22i.BASE 6.1.32.8i.BASE 6.1.31.3i.BASE 6.1.3.10i.BASE.

A vulnerability in the backup and restore functionality of Cisco FireSIGHT System Software could allow an authenticated, local attacker to execute arbitrary code on a targeted system. More Information: CSCvc91092. Known Affected Releases: 6.2.0 6.2.1.

A vulnerability in the CLI parser of the Cisco Web Security Appliance (WSA) could allow an authenticated, local attacker to perform command injection and elevate privileges to root. The attacker must authenticate with valid operator-level or administrator-level credentials. Affected Products: virtual and hardware versions of Cisco Web Security Appliance (WSA). More Information: CSCvd88855. Known Affected Releases: 10.1.0-204. Known Fixed Releases: 10.5.1-270 10.1.1-234.

A vulnerability in the CLI command-parsing code of Cisco Meeting Server could allow an authenticated, local attacker to perform command injection and escalate their privileges to root. The attacker must first authenticate to the application with valid administrator credentials. The vulnerability is due to insufficient validation of user-supplied input at the CLI for certain commands. An attacker could exploit this vulnerability by authenticating to the affected application and submitting a crafted CLI command for execution at the Cisco Meeting Server CLI. An exploit could allow the attacker to perform command injection and escalate their privilege level to root. Vulnerable Products: This vulnerability exists in Cisco Meeting Server software versions prior to and including 2.0, 2.1, and 2.2. Cisco Bug IDs: CSCvf53830.

A vulnerability in the USB-modem code of Cisco IOS XE Software running on Cisco ASR 920 Series Aggregation Services Routers could allow an authenticated, local attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the platform usb modem command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the platform usb modem command in the CLI of an affected device. A successful exploit could allow the attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. Cisco Bug IDs: CSCve48949.

A vulnerability in the installation procedure for Cisco Prime Network Software could allow an authenticated, local attacker to elevate their privileges to root privileges. More Information: CSCvd47343. Known Affected Releases: 4.2(2.1)PP1 4.2(3.0)PP6 4.3(0.0)PP4 4.3(1.0)PP2. Known Fixed Releases: 4.3(2).

A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to elevate privileges to the root level. More Information: CSCvb99384. Known Affected Releases: 6.2.1.BASE. Known Fixed Releases: 6.2.11.3i.ROUT 6.2.1.29i.ROUT 6.2.1.26i.ROUT.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with a privilege level of root on an affected device. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with root privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in Cisco SD-WAN Solution software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted request to an affected system. A successful exploit could allow the attacker to gain root-level privileges.

Cisco AnyConnect Secure Mobility Client before 3.1(8009) and 4.x before 4.0(2052) on Linux does not properly implement unspecified internal functions, which allows local users to obtain root privileges via crafted vpnagent options, aka Bug ID CSCus86790.

Cisco Web Security Appliance (WSA) devices with software 8.5.0-ise-147 do not properly restrict use of the pickle Python module during certain tunnel-status checks, which allows local users to execute arbitrary Python code and gain privileges via crafted serialized objects, aka Bug ID CSCut39230.

The image-upgrade implementation on Cisco Desktop Collaboration Experience (aka Collaboration Desk Experience or DX) DX650 endpoints allows local users to execute arbitrary OS commands via an unspecified parameter, aka Bug ID CSCus38947.

Cisco Virtual TelePresence Server Software does not properly restrict use of the serial port, which allows local users to execute arbitrary OS commands as root by leveraging vSphere controller administrative privileges, aka Bug ID CSCus61123.

Cisco Edge 300 software 1.0 and 1.1 on Edge 340 devices allows local users to obtain root privileges via unspecified commands, aka Bug ID CSCur18132.

Cisco AnyConnect Secure Mobility Client 4.0(.00051) and earlier allows local users to gain privileges via crafted IPC messages that trigger use of root privileges for a software-package installation, aka Bug ID CSCus79385.

A vulnerability in specific CLI commands for the Cisco Identity Services Engine (ISE) could allow an authenticated, local attacker to perform command injection to the underlying operating system or cause a hang or disconnect of the user session. The attacker needs valid administrator credentials for the device. The vulnerability is due to incomplete input validation of user input for certain CLI ISE configuration commands. An attacker could exploit this vulnerability by authenticating as an administrative user, issuing a specific CLI command, and entering crafted, malicious user input for the command parameters. An exploit could allow the attacker to perform command injection to the lower-level Linux operating system. It is also possible the attacker could cause the ISE user interface for this management session to hang or disconnect. Cisco Bug IDs: CSCvg95479.

Cisco Web Security Appliance (WSA) devices with software 8.5.0-ise-147 do not properly restrict use of the pickle Python module during certain tunnel-status checks, which allows local users to execute arbitrary Python code and gain privileges via a crafted pickle file, aka Bug ID CSCut39259.

A vulnerability in the Disk Check Tool (disk-check.sh) for Cisco Wide Area Application Services (WAAS) Software could allow an authenticated, local attacker to elevate their privilege level to root. The attacker must have valid user credentials with super user privileges (level 15) to log in to the device. The vulnerability is due to insufficient validation of script files executed in the context of the Disk Check Tool. An attacker could exploit this vulnerability by replacing one script file with a malicious script file while the affected tool is running. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device. Cisco Bug IDs: CSCvi72673.

A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability exist because the affected software improperly sanitizes command arguments, failing to prevent access to certain internal data structures on an affected device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain custom arguments. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device.

A vulnerability in how DLL files are loaded with Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to install and run an executable file with privileges equivalent to the Microsoft Windows SYSTEM account. The vulnerability is due to incomplete input validation of path and file names of a DLL file before it is loaded. An attacker could exploit this vulnerability by creating a malicious DLL file and installing it in a specific system directory. A successful exploit could allow the attacker to execute commands on the underlying Microsoft Windows host with privileges equivalent to the SYSTEM account. The attacker would need valid user credentials to exploit this vulnerability. This vulnerability affects all Cisco AnyConnect Secure Mobility Client for Windows software versions prior to 4.4.02034. Cisco Bug IDs: CSCvc97928.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542.

A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerability is due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit this vulnerability on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCve74432.

A vulnerability in the CLI of the Cisco StarOS operating system for Cisco ASR 5000 Series routers could allow an authenticated, local attacker to execute arbitrary commands with root privileges on an affected host operating system. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. To exploit this vulnerability, the attacker would need to authenticate to the affected system by using valid administrator credentials. Cisco Bug IDs: CSCvf93332.

The Comcast firmware on Motorola MX011ANM (firmware version MX011AN_2.9p6s1_PROD_sey) devices allows physically proximate attackers to execute arbitrary commands as root by pulling up the diagnostics menu on the set-top box, and then posting to a Web Inspector route.

Cisco Integrated Management Controller in Cisco Unified Computing System 2.2(2c)A and earlier allows local users to obtain shell access via a crafted map-nfs command, aka Bug ID CSCup05998.

Multiple unspecified vulnerabilities in the Command Line Interface (CLI) for Cisco Security Monitoring, Analysis and Response System (CS-MARS) before 4.2.1, allow local CS-MARS administrators to execute arbitrary commands as root.

Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI command-parsing code of the Cisco StarOS operating system for Cisco ASR 5000 Series 11.0 through 21.0, 5500 Series, and 5700 Series devices and Cisco Virtualized Packet Core (VPC) Software could allow an authenticated, local attacker to break from the StarOS CLI of an affected system and execute arbitrary shell commands as a Linux root user on the system, aka Command Injection. The vulnerability exists because the affected operating system does not sufficiently sanitize commands before inserting them into Linux shell commands. An attacker could exploit this vulnerability by submitting a crafted CLI command for execution in a Linux shell command as a root user. Cisco Bug IDs: CSCvc69329, CSCvc72930.

Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker with a low-privileged account to elevate privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the local-mgmt CLI command of the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to perform a command injection attack. More Information: CSCvb61394 CSCvb86816. Known Affected Releases: 2.0(1.68) 3.1(1k)A. Known Fixed Releases: 92.2(1.101) 92.1(1.1658) 2.0(1.115).

A vulnerability in a script file that is installed as part of the Cisco Policy Suite (CPS) Software distribution for the CPS appliance could allow an authenticated, local attacker to escalate their privilege level to root. The vulnerability is due to incorrect sudoers permissions on the script file. An attacker could exploit this vulnerability by authenticating to the device and providing crafted user input at the CLI, using this script file to escalate their privilege level and execute commands as root. A successful exploit could allow the attacker to acquire root-level privileges and take full control of the appliance. The user has to be logged-in to the device with valid credentials for a specific set of users. The Cisco Policy Suite application is vulnerable when running software versions 10.0.0, 10.1.0, or 11.0.0. Cisco Bug IDs: CSCvc07366.

A vulnerability in the CLI of the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to perform a command injection attack. More Information: CSCvb61351 CSCvb61637. Known Affected Releases: 2.0(1.68) 3.1(1k)A. Known Fixed Releases: 92.2(1.101) 92.1(1.1645) 2.0(1.82) 1.1(4.136.

A vulnerability in the debug plug-in functionality of the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to execute arbitrary commands, aka Privilege Escalation. More Information: CSCvb86725 CSCvb86797. Known Affected Releases: 2.0(1.68) 3.1(1k)A. Known Fixed Releases: 92.2(1.105) 92.1(1.1733) 2.1(1.69).

Unspecified vulnerability in the VPN Client for Windows Graphical User Interface (GUI) (aka the VPN client dialer) in Cisco VPN Client for Windows 4.8.00.* and earlier, except for 4.7.00.0533, allows local authenticated, interactive users to gain privileges, possibly due to privileges of dialog boxes, aka bug ID CSCsd79265.

Cisco Secure Access Control Server (ACS) 3.x for Windows stores ACS administrator passwords and the master key in the registry with insecure permissions, which allows local users and remote administrators to decrypt the passwords by using Microsoft's cryptographic API functions to obtain the plaintext version of the master key.