A privilege escalation vulnerability exists in the installation of Advantech DeviceOn/iService 1.1.7. A specially-crafted file can be replaced in the system to escalate privileges to NT SYSTEM authority. An attacker can provide a malicious file to trigger this vulnerability.

An exploitable local privilege elevation vulnerability exists in the file system permissions of Advantech WebAccess/SCADA 9.0.1 installation. In webvrpcs Run Key Privilege Escalation in installation folder of WebAccess, an attacker can either replace binary or loaded modules to execute code with NT SYSTEM privilege.

A privilege escalation vulnerability exists in the Windows version of installation for Advantech R-SeeNet Advantech R-SeeNet 2.4.15 (30.07.2021). A specially-crafted file can be replaced in the system to escalate privileges to NT SYSTEM authority. An attacker can provide a malicious file to trigger this vulnerability.

An issue was discovered in Advantech SUISAccess Server Version 3.0 and prior. The admin password is stored in the system and is encrypted with a static key hard-coded in the program. Attackers could reverse the admin account password for use.

Advantech WebAccess 8.3.1 and earlier has an improper privilege management vulnerability, which may allow an attacker to access those files and perform actions at a system administrator level.

WebAccess Versions 8.3.2 and prior. During installation, the application installer disables user access control and does not re-enable it after the installation is complete. This could allow an attacker to run elevated arbitrary code.

A privilege escalation vulnerability exists in the Windows version of installation for Advantech R-SeeNet Advantech R-SeeNet 2.4.15 (30.07.2021). A specially-crafted file can be replaced in the system to escalate privileges to NT SYSTEM authority. An attacker can provide a malicious file to trigger this vulnerability.

WebAccess Node (All versions prior to 9.0.1) has incorrect permissions set for resources used by specific services, which may allow code execution with system privileges.

An exploitable local privilege elevation vulnerability exists in the file system permissions of Advantech WebAccess/SCADA 9.0.1 installation. In webvrpcs Run Key Privilege Escalation in installation folder of WebAccess, an attacker can either replace binary or loaded modules to execute code with NT SYSTEM privilege.

An exploitable local privilege elevation vulnerability exists in the file system permissions of Advantech WebAccess/SCADA 9.0.1 installation. In COM Server Application Privilege Escalation, an attacker can either replace binary or loaded modules to execute code with NT SYSTEM privilege.

An exploitable local privilege elevation vulnerability exists in the file system permissions of Advantech WebAccess/SCADA 9.0.1 installation. In privilege escalation via PostgreSQL executable, an attacker can either replace binary or loaded modules to execute code with NT SYSTEM privilege.

An exploitable local privilege elevation vulnerability exists in the file system permissions of Advantech WebAccess/SCADA 9.0.1 installation. In privilege escalation via multiple service executables in installation folder of WebAccess, an attacker can either replace binary or loaded modules to execute code with NT SYSTEM privilege.

A privilege escalation vulnerability exists in Advantech SQ Manager Server 1.0.6. A specially-crafted file can be replaced in the system to escalate privileges to NT SYSTEM authority. An attacker can provide a malicious file to trigger this vulnerability.

A privilege escalation vulnerability exists in the installation of Advantech DeviceOn/iEdge Server 1.0.2. A specially-crafted file can be replaced in the system to escalate privileges to NT SYSTEM authority. An attacker can provide a malicious file to trigger this vulnerability.

A privilege escalation vulnerability exists in the Windows version of installation for Advantech R-SeeNet Advantech R-SeeNet 2.4.15 (30.07.2021). A specially-crafted file can be replaced in the system to escalate privileges to NT SYSTEM authority. An attacker can provide a malicious file to trigger this vulnerability.

A Stack-based Buffer Overflow issue was discovered in Advantech WebAccess versions prior to 8.3. There are multiple instances of a vulnerability that allows too much data to be written to a location on the stack.

Buffer overflow in an ActiveX control in bwocxrun.ocx in Advantech/BroadWin WebAccess before 7.0 allows remote attackers to execute arbitrary code by leveraging the ability to write arbitrary content to any pathname.

A Stack-based Buffer Overflow issue was discovered in Advantech WebAccess versions prior to V8.2_20170817. The application lacks proper validation of the length of user-supplied data prior to copying it to a stack-based buffer, which could allow an attacker to execute arbitrary code under the context of the process.

Buffer overflow in the Advantech ADAM OLE for Process Control (OPC) Server ActiveX control in ADAM OPC Server before 3.01.012, Modbus RTU OPC Server before 3.01.010, and Modbus TCP OPC Server before 3.01.010 allows remote attackers to execute arbitrary code via unspecified vectors.

Stack-based buffer overflow in NTWebServer.exe in the test web service in InduSoft NTWebServer, as distributed in Advantech Studio 6.1 and InduSoft Web Studio 7.0, allows remote attackers to cause a denial of service (daemon crash) or possibly execute arbitrary code via a long request to TCP port 80.

Multiple buffer overflows in the ISSymbol ActiveX control in ISSymbol.ocx 61.6.0.0 and 301.1009.2904.0 in the ISSymbol virtual machine, as distributed in Advantech Studio 6.1 SP6 61.6.01.05, InduSoft Web Studio before 7.0+SP1, and InduSoft Thin Client 7.0, allow remote attackers to execute arbitrary code via a long (1) InternationalOrder, (2) InternationalSeparator, or (3) LogFileName property value; or (4) a long bstrFileName argument to the OpenScreen method.

Race condition in Advantech WebAccess before 8.1 allows remote attackers to execute arbitrary code or cause a denial of service (buffer overflow) via a crafted request.

A heap-based buffer overflow issue was discovered in Advantech WebAccess versions prior to V8.2_20170817. Researchers have identified multiple vulnerabilities where there is a lack of proper validation of the length of user-supplied data prior to copying it to the heap-based buffer, which could allow an attacker to execute arbitrary code under the context of the process.

A Heap-Based Buffer Overflow issue was discovered in Advantech WebOP. A maliciously crafted project file may be able to trigger a heap-based buffer overflow, which may crash the process and allow an attacker to execute arbitrary code.

An Improper Restriction Of Operations Within The Bounds Of A Memory Buffer issue was discovered in Advantech WebAccess versions prior to V8.2_20170817. Researchers have identified multiple vulnerabilities that allow invalid locations to be referenced for the memory buffer, which may allow an attacker to execute arbitrary code or cause the system to crash.

A stack-based buffer overflow issue was discovered in Advantech WebAccess versions prior to V8.2_20170817. Researchers have identified multiple vulnerabilities where there is a lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer, which could allow an attacker to execute arbitrary code under the context of the process.

Advantech/BroadWin WebAccess before 7.0 allows remote attackers to cause a denial of service (memory corruption) via a modified stream identifier to a function.

In WebAccess/SCADA Versions 8.3.5 and prior, multiple untrusted pointer dereference vulnerabilities may allow a remote attacker to execute arbitrary code.

Multiple stack-based buffer overflows in unspecified DLL files in Advantech WebAccess before 8.0.1 allow remote attackers to execute arbitrary code via unknown vectors.

Stack-based buffer overflow in Advantech WebAccess before 7.2 allows remote attackers to execute arbitrary code via a long UserName parameter.

All versions prior to 9.1.4 of Advantech WebAccess/SCADA are vulnerable to use of untrusted pointers. The RPC arguments the client sent could contain raw memory pointers for the server to use as-is. This could allow an attacker to gain access to the remote file system and the ability to execute commands and overwrite files.

Buffer overflow in Advantech WebAccess before 8.1_20160519 allows local users to cause a denial of service via a crafted DLL file.

Buffer overflow in the BwpAlarm subsystem in Advantech WebAccess before 8.1 allows remote attackers to cause a denial of service via a crafted RPC request.

Multiple stack-based buffer overflows in Advantech WebAccess before 8.1 allow remote attackers to execute arbitrary code via unspecified vectors.

Multiple heap-based buffer overflows in Advantech WebAccess before 8.1 allow remote attackers to execute arbitrary code via unspecified vectors.

Advantech WebAccess before 8.1 allows remote attackers to cause a denial of service (out-of-bounds memory access) via unspecified vectors.

Multiple stack-based buffer overflows in Advantech AdamView 4.3 and earlier allow remote attackers to execute arbitrary code via a crafted (1) display properties or (2) conditional bitmap parameter in a GNI file.

Multiple stack-based buffer overflows in an unspecified DLL file in Advantech WebAccess before 8.0_20150816 allow remote attackers to execute arbitrary code via a crafted file that triggers long string arguments to functions.

Buffer overflow on Advantech EKI-1200 gateways with firmware before 1.63 allows remote attackers to execute arbitrary code via unspecified vectors.

Multiple stack-based buffer overflows in Advantech WebAccess before 7.2 allow remote attackers to execute arbitrary code via a long string in the (1) ProjectName, (2) SetParameter, (3) NodeName, (4) CCDParameter, (5) SetColor, (6) AlarmImage, (7) GetParameter, (8) GetColor, (9) ServerResponse, (10) SetBaud, or (11) IPAddress parameter to an ActiveX control in (a) webvact.ocx, (b) dvs.ocx, or (c) webdact.ocx.

Stack-based buffer overflow in Advantech WebAccess (formerly BroadWin WebAccess) 7.2 allows remote attackers to execute arbitrary code via the GotoCmd parameter.

Stack-based buffer overflow in Advantech WebAccess (formerly BroadWin WebAccess) 7.2 allows remote attackers to execute arbitrary code via the NodeName2 parameter.

Stack-based buffer overflow in Advantech WebAccess (formerly BroadWin WebAccess) 7.2 allows remote attackers to execute arbitrary code via the AccessCode parameter.

Stack-based buffer overflow in Advantech WebAccess (formerly BroadWin WebAccess) 7.2 allows remote attackers to execute arbitrary code via the UserName parameter.

Stack-based buffer overflow in Advantech WebAccess (formerly BroadWin WebAccess) 7.2 allows remote attackers to execute arbitrary code via the AccessCode2 parameter.

Stack-based buffer overflow in Advantech WebAccess (formerly BroadWin WebAccess) 7.2 allows remote attackers to execute arbitrary code via the NodeName parameter.

Stack-based buffer overflow in Advantech WebAccess before 7.2 allows remote attackers to execute arbitrary code via a long NodeName2 argument.

Stack-based buffer overflow in Advantech WebAccess before 7.2 allows remote attackers to execute arbitrary code via a long AccessCode2 argument.

The affected product is vulnerable to memory corruption condition due to lack of proper validation of user supplied files, which may allow an attacker to execute arbitrary code. User interaction is required on the WebAccess HMI Designer (versions 2.1.9.95 and prior).

Stack-based buffer overflow in Advantech WebAccess before 7.2 allows remote attackers to execute arbitrary code via a long AccessCode argument.